IOS-XR and IOS MSDP Peer --- One way SA exchange

Hi.
I am running MSDP peering between IOS 7200 and IOS-XR.
I noticed there's one way SA exchange only.
When IOS-XR router sends SAs, I can receive it in 7200.
But when 7200 sends SA, it does not reflect in IOS-XR.
Need help the soones guys...
thanks in advance.

The router did not seem to like it when I tried to log the ACL:
MyRouter(config)#ip access-list extended SDM_IP
MyRouter(config-ext-nacl)# remark CCP_ACL Category=1
MyRouter(config-ext-nacl)# permit icmp any any log
class-map SDM_IP : access-list with 'log' not supported, pls remove 'log' from access-list otherwise class-map SDM_IP will not work properly
MyRouter(config-ext-nacl)# permit udp any any log
class-map SDM_IP : access-list with 'log' not supported, pls remove 'log' from access-list otherwise class-map SDM_IP will not work properly
MyRouter(config-ext-nacl)# permit tcp any any log
class-map SDM_IP : access-list with 'log' not supported, pls remove 'log' from access-list otherwise class-map SDM_IP will not work properly
MyRouter(config-ext-nacl)# permit ip any any log
class-map SDM_IP : access-list with 'log' not supported, pls remove 'log' from access-list otherwise class-map SDM_IP will not work properly
So I let it go through and it did not appear to hit the ACL either:
MyRouter#sho ip access-list | b SDM_IP
Extended IP access list SDM_IP
    10 permit icmp any any log
    20 permit udp any any log
    30 permit tcp any any log
    40 permit ip any any log
I have since took the logging part off since it didn't seem to have an effect.

Similar Messages

My iPhone calendar and iCloud sync only one way

My iPhone 4 (iOS 5) calendar and iCloud sync only one way -- from iCloud to the phone. Any ideas why I can't sync from my iPhone calendar to iCloud?

When you add an event on Iphone, 3rd fields down from bottom, select calender > iCloud. Voila!!
I am not sure everybody understand really the intention with iCloud. It is one single calender residing on a Apple server somewhere. Selecting iCloud from any device will show this calender. Then how to sync this with other calenders is to me a mystery, or not possible, especially on Lion iCal. Please anyone.

Want to wireless sync AND sync to outlook (one-way is OK)

For a long time I have just been syncing to outlook on my desktop. Now my job requires that I have wireless sync to the online calendar at work. Only my calendar syncs wirelessly. I can still sync notes, tasks, contacts to outlook.
I would like to be able to do at least a one-way sync from device to outlook. I tried temporarily disabling the wireless sync on the calendar, but it didn't work.
So, in a nutshell, how can I wirelessly sync to my work calendar, AND desktop sync to outlook at home.
Is there a work-around for this?
9630 / Sprint

Hi plovett and welcome to the BlackBerry Support Community Forums!
Just to clarify, you only want to synchronize your calendar wirelessly to work and the rest you want to synchronize with your desktop at home?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Calendar and Contact Sync: Force one way only?

Is there any way to force Outlook to always be the sync "master"? i.e. regardless of what I do on the touch (say, delete a contact), when I sync, the touch will be forced to match Outlook (and replace the contact)?
Or is that the default behavior, and I have some other issue?
I have had a couple of instances of appointments being deleted from Outlook during the sync (I think the "do not sync appts older than 30 days" really means "delete" them in outlook")
Bill
Message was edited by: Isssy

You are able to export your contacts and import them to your Gmail account. Below is a very good post that will provide you the steps to export the contacts using Backup Assistant and then import them to your Gmail account.
http://community.vzw.com/t5/DROID-Incredible-by-HTC/export-contacts-to-gmail/m-p/285574/highlight/true#M12187
Please note, you must have Backup Assistant on your device to be able to export the contacts.
In regards to the calendar, you can view other calendars by following the steps listed below:
1. Select the Calendar icon
2. Select Menu
3. Select More
4. Select Calendars
5. Select the calendars that you want to display
Thank you,
AraceliT_VZW

File Sharing on a Network and it only works one way

I recently configured a new wireless network, and want to fileshare between my Mac and old PC. I have followed several tutorials, and I can read/write to the Mac from the PC. However, when I try to connect to the PC from the Mac, it asks for username and password. I type in the only user name and password setup on the PC, and it says I do not have access to that server. Any ideas?

There is a "Server" service, and it is running on the laptop. The file I needed to move was ~150GB - wifi would be faster than OneDrive. You can appreciate my desire for full gigabit speed :)
I can connect to the laptop from the desktop over wifi. So the functionality of sharing is all there for me. But I am completely unable to set the wired network's location to "Private", which essentially enables Windows Firewall rules under the hood that
block any file sharing connections.
I can manually edit the firewall rules, but these apply only to network location profiles, i.e. "Domain", "Public", "Private", or "All".
I'll post a few screenshots to try and make this more clear.
Here is my wifi connection. Highlighted in red you can see the option to enable file sharing. Prett slick.
Here is a screenshot of my wired connection. As you can see, the option to enable sharing is completely missing.
The only explanation I can come up with for this is that it is an "Unidentified network", however on the other end of the cable is a desktop with the same connection settings running the same OS with the same updates and on that machine the network is set
to "Private" and has file sharing enabled. The option to enable or disable file sharing does not appear on the desktop either. The only difference between the two is that the network was enabled on the desktop prior to updating to Windows 8.1 (from Windows
8), the laptop had Windows 8.1 clean installed.

Bizarre! One-Way Audio all of a sudden.

I have a 7940 connected to an ASA5505 version 9.1(4) (originally connected on a DOCSIS 3 cable modem) which has a site-to-site VPN tunnel that terminates on a Cisco 1841 and CCM 6.1 it's been working perfectly forever.
Recently I switched to a fibre optic connection (instead of the cable modem) and now I have one-way audio. Everything else works perfectly (access to CIFS/SMB file shares, FTP, telnet, SSH) though the tunnel and it behaves as it always did except a lot faster on fibre (80 ms ping down to 6 ms). The fibre ISP delivers various services (IPTV, Internet, etc.) via different VLANs so their Internet vlan is 802.1q tag 35.
So the configuration was:
interface Ethernet0/0
switchport access vlan 6
interface Vlan6
nameif outside
security-level 0
ip address dhcp setroute
and now it is:
interface Ethernet0/0
switchport trunk allowed vlan 33-36
switchport mode trunk
interface Vlan35
mac-address 109f.xxxx.xxxx
nameif outside
security-level 0
ip address dhcp setroute
and now I have one-way audio (I can hear the other end but they can't hear me). Everything else works perfectly (e.g. call setup, dialling touch tones, etc.). As the change is so subtle (just the outside interface) I am baffled and don't know where to begin troubleshooting this. In fact when it happened I was sure it was just a problem with the handset cord but I can "hear" my voice echoing back a bit. I'm keeping the DOCSIS 3 cable Internet until I get this sorted out but of course now paying for two Internet connections so don't want to have to do that any longer than I have to.
Any insight or suggestions on how to proceed very much appreciated.

Well I sort of found the problem but not yet the solution. I had to switch to an ASA5505 with the Security Plus license to get the trunk I needed. If I take out the trunk (so the same configuration will work on an ASA with the base license) and get raw Internet connectivity another way (so I don't need the trunk) I have one ASA that works and one that doesn't.
They both are running 9.1(4) and have identical configurations (copied to both with TFTP).
The ASA with the Security Plus license has one way audio, the base license ASA does not.
I also uploaded both configurations to a unix box and did a diff:
< switchport trunk allowed vlan 33-36
< switchport mode trunk
> switchport access vlan 6
39a39,43
> interface Vlan6
> nameif outside
> security-level 0
> ip address dhcp setroute
> !
46,51d49
< interface Vlan35
< mac-address 109f.a943.f36a
< nameif outside
< security-level 0
< ip address dhcp setroute
< !
86d83
< mtu dmz 1500
88c85
< no failover
> mtu dmz 1500
So it's a bug, revealed by the security plus license as they have identical software and identical configurations and act differently. Not sure how to work around it yet as I have to use another router temporarily to not require the trunk and the performance is less than stellar with that in the mix. I also upgraded 9.1(4) to 9.2(1) on both - no joy, still the same.

One isight, two macs with ichatAV. Why no one way video?

Hi everyone,
I'm kinda surprised this has never been discussed before, I looked pretty hard, but I could be wrong.
Here's my question, is it possible to have only one person with a webcam (iSight in this case) and still have a one way video conference? Specifically, my dad has an iMac G4 with Tiger and an iSight attached. I have a powerbook G4 with Tiger and rarely have the ability to have an iSight attached because of mobility and all. Is there a way to see my dad when I start an ichat with him without having my camera attached? Is there a work around? If not, then I gotta ask the obvious question, WHY? It seems pretty feasible. One person has a camera the other doesn't and one person would like to see the other in an ichat.
Any help or workarounds would be greatly appreciated.
Thanks!

Your dad might have to disconnect and reconnect in order to see the one-way video chat option under the Buddies menu. This happened to me the other day when I tried using iChat/iSight for the first time. I have an iSight and my parents don't. Until I tried disconnecting/reconnecting the only option in the Buddies menu was for a standard two-way video chat.
Steve

Writing test case for One-way messaging returns fault

Hi All,
We are using latest 11.1.1.7 version of SOA Suite. There is a SOA composite which gets data feed from external party using the one-way message exchange pattern to store the feed into the database.
i.e. from (Web Service component ----> Mediator ----> DBAdapter). The composite uses one way returns fault pattern. This basically returns only the faults when they occur and seems to work as expected. I can see any runtime errors (like database not available returned to the Mediator and the caller of the web service). However, I am unable to write a test case for the fault returned in case of database adapter unable to connect to database as the 'Emulates' tab is disabled.
Happy to provide more details if required.
Thanks

Hi,
By looking at the error what you have got it indicates that you are not catching the specific fault which is thrown by bpel1 in bpel2.
Regards,
Santosh Hemashekar

SPA942 has only one way audio

I can make calls, but when the other person picks up, they can hear me but I can't hear them. I am connected to my Linksys WRT54G router and have Optimum Online as my internet connection. Is there any reason why this would be happening? I have tried the phone at another location and it works fine.

One way audio in most cases are routing issues.
Can you check if rtp packets are reaching both ways(There is no firewall blocking rtp traffic )
In cisco phones you could check that by pressing the "?" button.

Screen sharing only in one way

Hi, I'm doing screen sharing everyday -mostly for helping other with their macs- with no problem but with one person (an uncle of mine).
He uses a new 20" iMac (the late one), we can text chat, videoconferencing, audioconferencing and screen sharing in one way, I can let him control my mac but it's impossible to let me control his Mac.
The fourth button in ichat (where to ask for permission or give permission to screen sharing) is half enable, only one of the options is enabled to click on, the option for "ask for screen sharing" isn't. So I can give him permission to control my mac but not to control his mac.
How can this be possible? I asume screen sharing works in the same protocols in both ways, above all when we can do video and audio conferencing.
Thanks in advance for your help

Hi Ralph,
When you have ticked the screen sharing option in iChat>video>screen sharing and your buddy "high lights" (one click) your screen name the screen sharing icon will be displayed in black on his end indicating "enabled".
This way he can ask for your permission to share your screen.
When your contact has not ticked the screen sharing option the screen sharing icon in your contact list will be grey.
When your contact has ticked the screen sharing option as well the screen sharing icon in your contact list will be black as well.
Of course all other requirements for iChat screen sharing have to be met.
More important: I wish you a very happy new year!

One Way Chat

I am trying to invite my parents (PC users) to a one-way chat. All info says control-click and select "Invite to one-way Video chat"
I don't get that option, not even a greyed out option.
I am using ichat 3.1.8.
Would my parents set-up effect my options?
Dual Core imac Mac OS X (10.4.9)

Should've done a search first. Plenty of answers to this question already.

How can i delete an icloud accout from iphone 5 (ios 7.0.4)and insert a new one ???

how can i delete an icloud accout from iphone 5 (ios 7.0.4)and insert a new one ???

You'll need to contact the previous owner to get them to remove the account.
There is no way to bypass this security feature. If you can't contact the previous owner you have wasted your money and have a phone you'll never be able to use.

Anyway to reset/reload the iCloud Contact list from a good know source (one way synch, from an iOS device to iCloud)?

Is there anyway to reset/load the iCloud Contact list form a good known source?
i.e. One way synch, from an iOS device to iCloud (The way we used to be able to do it with MobileMe)?
My current iCloud Contact list is messed up and I want to reset/reload it with a good know list from one of my iOS devices, but I can't find a way to do it, or at least it is not obviouse to me.
Any help is greatly appreciated.

I agree ! Need to be able to flush out and reset what's in the Cloud easily/simply, then start a new sync from a known good source.
So far, not impressed (again) with Apple's syncing prowess...

Is it possible to download iOS 5 from one iMac and not get them totally wiped of apps and stuff. We have an iPad each and a communal email address and an iCloud address each. One iPad now is totally screwed up.

Is it possible to download iOS 5 from one iMac on two ipads and not get them totally wiped of apps and stuff. We have an iPad each and a communal email address and an iCloud address each. One iPad now is totally screwed up.

Thank you for your reply.
I am somewhat new to iOS and OS having grown up with DOS and Windows. I am not familiar with IMAP and iCloud and I am not even sure which types of servers my various emails use.
The problem I would anticipate with iCloud is that (I assume) it would limit my access to data (including mail) on the iCloud to when I happen to be logged onto the internet. I also assume(?) that large files (photos etc.) would require some time to download whenever I wish to access them from whichever device I happen to be using (I hope I am wrong about this).
I have kept my devices to 500gb - 1TB for OS and 32gb - 128gb for iOS but since I have pretty slow WiFi (shared with DirecTV Whole Home and Netflix streaming) it is my impression that iCloud might be quite limited due to data transfer times.
Perhaps a factor would be that I have 2 DSL lines and my main DSL line is connected to two wireless routers (to also provide WiFi in a metal building that blocks WiFi and Cellular signals)
I may be totally wrong in my assumptions regarding iCloud. My mail is not so urgent that I need access to it instantly and I could wait until I had internet access or I can get it on my iPhone. My main concern with iCloud would be my data files (Word, Pages, Excel, Numbers etc.).
On the other hand, if I wanted to keep my 10,000 emails that would take up a lot of iCloud memory and I don't know how to measure how much storage it would take or how to move Hotmail or even iCloud mail to iCloud.
It may take me some time to figure this out.

HT4623 i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work.

IOS-XR and IOS MSDP Peer --- One way SA exchange

Similar Messages

Maybe you are looking for