IOS7 upgrade and failure of projector connection

Hi,
upgraded iPad 2 to iOS7u and now realize I cannot connect to projectors via the VGA adapter. It seems some other folks have a simliar problem. I use my iPad a lot in the lecture theatre and this lack of functionality is not clever. Any ideas folks, bearing in mind that institutions invariable have a wide range of projector ages from VGA to HDMI?
Many thanks
MU

I have the same problem. I'm currently on an iPad 2 w/iOS 7.03. I've tested all cables and adapters on an iPhone, they all pass. I've tried the iPad on several different monitors, they all fail. I've shut off and restarted my device, no change. I'm now trying to figure out how to roll back to iOS 6, or even "factory reset" my device (if that's even possible).
In short, iPad2 + iOS7 = 30-pin to VGA FAIL !!!

Similar Messages

  • TS1702 I did the ios7 upgrade and Overdrive crashed.  Got new ID and password.  Had to get new ID and password for Apple.  Now pictures just taken do not appear in photostream!  Where did they go?  Also, unable to get online.  Battery life is being used t

    I am having trouble with multiple applications after the ios7 upgrade!  i.e. Overdrive crashed!  (resolved with new ID and password).  Photos just taken are not in the photostream...where are they?  Can't get on the internet!  It appears everything is not working as it did. 

    Call Apple Customer Relations - 1-800-275-2273.  Ask politely & firmly that you want to be transferred to Customer Relations.  Tell them exactly what you stated in your post.
    GOOD LUCK!
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.  

  • IOS7 upgrade and can no longer choose

    just upgraded my iPhone4 to ios7 from 6.x and lost functionality within podcast app
    Used to be able to select audio output source via an icon at bottom right of screen - speaker, headset, bluetooth speakers etc.
    Now I get the wording "dock connector" over the volume bar when I am in the car.  Blue tooth works great for phone calls but I can not get the podcast to switch from dock connector to blue tooth when in my Kia. Airplay doesnt show up anywhere on my phone. Please advise.

    If you have hidden the menu bar containing File, Edit, View etc, this link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing
    For other toolbar items see https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • IPad won't start after iOS7 upgrade and reset

    Hi,
    I have just tried to upgrade to iOS7 through WiFi. No luck. So I upgraded via iTunes. When it finally was finished, I tried to turn on my iPad, but it wouldn't. It gets stuck at the Apple logo with a loading bar just under it. I did a full reset on iTunes and I can only get to the loading bar (which won't load).. Any suggestions?

    I was experiencing the same thing.  This article worked for me, hopefully it will help you.
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    Hold both the home button and the wake/suspend button down at the same time. You should see the Apple logo appear on your screen after holding these buttons down a couple of seconds, which means your iPad is booting up and should be good to go in a few more seconds.

  • 11.2g RAC Upgrade and still able to connect with original SID

    Hello,
    I am looking for options on when I upgrade to RAC, is there a way that I dont have to update the clients that still use host:port:sid? Such as the clients that use JDBC to connect and dont have the service_name.
    Thanks

    Yes. You can use the same services.
    Regards
    Antony Ankrose J
    Edited by: user13643646 on 29 Aug, 2011 5:24 PM

  • HT1695 i downloaded the IOS software upgrade and can no longer connect to any WiFi network, what can I do to fix this?

    I have attempted to reset the network settings, nothing changed.  The wireless router is working and has nothing wrong with it.  Ever since I downloaded the software update, WiFi connection can not happen and every time I try to do anything that uses the internet it directs me to the apple support site.  How can this be resolved?    

    I've tried the following:
    * Settings | General | Reset | Reset Network Settings (Twice)
    * Settings | General | Reset | Reset All Settings (Once)
    * Plugging it in and doing a "Restore" through iTunes (that's how I downloaded iOS 5.1.1 in the first place)
    All the passcodes and restrictions are are turned off.
    When I first try to connect to the network, I'm prompted to enter my username and password (I've elected to "forget" the network a few times so I can get this screen again). If I enter it wrong, then I just get an error that I'm not connected. When I enter it right, I get a warning that the certificate is "not verified". When I click on "More Details", I can see all the information that got pulled from the network (Issuer Name, Signature Algorithm, Public Key Algorithm, Key Usage, etc.). When I choose to "Accept", I get the little icon indicating that it's trying to connect...this never goes away (I let it run for an hour).
    The encryption type on the main Wifi I'm trying to connect to says it's RSA (I'm guessing it's WEP though...I didn't set it up, our IT group did that).

  • My ipod updated to ios7.2 and now it can' connect to wifi

    All I did was update the software to iOS 7.2 and now it won't connect to my home wi-fi at all. I've put in the wi-fi password multiple times, correctly, and it doesn't even try to connect. It automatically goes to an error message saying that I used the wrong password. Everything else in my house is able to connect to the internet, just not my ipod.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Download ios 5.0.1 upgrade and now ipad2 wont connect to itunes

    I downloaded the upgrade.  iTunes said it was backing up my ipad-2.  Some error happened and now all my iPad shows is the start-up screen telling me to hook the usb up to iTunes.  iTunes doesnt recognize the iPad though.  Tried the normal cycling of the iPad and restarting the computer in different ways but to no avail.  I leave on a trip in 15 hours and really need my iPad.  Any ideas?

    Not sure what I did but it finaly recognized the ipad and it is restoring now.....

  • Upgraded and Migrated Clients Still Connecting To Old MP

    I'm doing a migration from one site to another and I've just started with one ip range boundary. I did a discovery on the new systems and they all show up in my new site and the clients are getting installed. The only problem is that they are still connecting
    to the old MP. I can see this in ClientLocation.log. What am I missing?
    Orange County District Attorney

    Hi,
    Could it be that the SCCM clients in the old site was distributed uisng a GPO? That GPO is "tattoing" so you need to clear that value in the registry if that was used otherwise that will overwrite all ways to set/discover the
    site code for a client.
    Here is a post on the topic:
    http://blog.coretech.dk/heh/new-agents-will-not-re-assign-to-configmgr-2012-site/
    Also check which site have Boundary Groups configured for site assignment as well. that could alos cause this issue.
    Regards,
    Jörgen 
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • HT201210 How do I get the plug and itunes logo off my Ipad?  I was doing the 2nd ios7 upgrade and I am stuck

    I was upgrading my IPad2 with the 2nd IOS 7, when I looked at the screen it has a picture of the cable and a blue round itunes icon.  I cannot do anything to the screen, I have tried to turn it off, but the same screen comes back.  Please help!

    You are in Recovery Mode.
    You have to follow the instructions below to recover your iPad.
    http://support.apple.com/kb/ht4097

  • HT1199 Im traveling abroad and while I  have refused the IOS7 upgrade my iPad is now lock.  The display only reflecting iTunes and the USB cable images.  Now I can not access my photos and or my email.  Anyway I can reset without connecting to my computer

    Im traveling abroad and while I  have refused the IOS7 upgrade my iPad is now lock.  The display only reflecting iTunes and the USB cable images.  Now I can not access my photos and or my email.  Anyway I can reset without connecting to my computer?

    penny175 wrote:
    Anyway I can reset without connecting to my computer?
    No. Not without access to a computer running iTunes. You do want to use your own computer so that you can restore from your backup and sync your own content back from iTunes.

  • Mail and Notes stopped working on my Macbook after 10.8.5 upgrade   iOS7 upgrade

    Hello
    I recently upgraded my system to 10.8.5.
    I also recently upgraded my 2 iphones to iOS7.
    Then i found out my Notes were not syncing on my macbook pro, but the sync works fine on both iphones and when i check the iCloud website, they are also updated.
    Then mail also stopped working and after reading some posts on this forum, i understand that mail and notes are somehow connected (both using IMAP?)..
    I can't configure my iCloud email account on the mail app, i get a "iCloud IMAP « p03-imap.mail.me.com » not responding" answer, whatever i do. I tried deleting the account, deleting all entries linked to the mail app in the keychain, changing my iCloud password to match new apple password requirements.... nothing works.
    And all my other email accounts don't work anymore either. Mail just won't connect with any Imap or Pop server.
    My internet works fine, I can access all those emails account via webmail interfaces.
    Again, my iCloud works fine on all other iOS7 devices.
    What's the problem??
    Thanks
    jk

    Mail.
    Hold down the option key and go to Finder/Go, then select your User Library. Select Containers/com.apple.mail. Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis.

  • Updated to iOS7 and no longer can connect to netflix

    Upgraded to iOS7 and now cannot connect to Netflix.  Any fixes?

    I too have issues with Netflix after the OS update.  I have "restarted" as you suggested and that does nothing to solve the issues.  It is slow to connect, it fails 9x out of 10 to make a connection, if it does connect it will drop out of play.  I link to Netflix directly thru its free app.  I am using Ipad 2.  This OS upgrade is awful.  Any connection to internet is slowed.

  • HTF do i get my iPhone to connect to network after iOS7 upgrade? (Upgrade--really?)

    HTF do i get my iPhone to connect to network after iOS7 upgrade?  Upgrade?  Really?   I'm just really upset that I have to continually make concessions to someone else and my product does NOT work the way it should, and has done in the past!!!!

    Depends on your browser and it may appear in your downloads folder to run.  If you are using IE, it will appear on the bottom of the screen, Google Chrome, bottom of the screen, Firefox, top of the screen with an big arrow

  • Help!  Missing pics, notes, and everything in between after iOS7 upgrade

    Last night, I upgraded to iOS7.  Before doing so, I connected my iPhone to my PC and backed up the contents (to the PC).  Once complete, I moved ahead with the upgrade.  Once complete, I think I may have accidentally hit something, causing my phone to be backed up once again, only there was nothing on it after the upgrade to iOS7.  Did this overwrite my original backup?  Clear out my pics, notes, etc.?  Can I retrieve them?  Any help is greatly appreciated.
    Thank you!

    This is my problem I don't have this icon so it is going to be difficult to try the solution ie. general-reset-reset home screen layout

Maybe you are looking for

  • Movement type 122 Error while GI" Update control of movement type is incorr

    Hai Gurus,          I am having an errow when doing a GI thru movement type 122. i am getting this error message " Update control of movement type is incorrect (entry 122 X X)" Can any one help me how to fix this. I did this transaction using MIGO_GI

  • Best way to draw (not plot) on a graph?

    Hi - I need to alter the appearance of a graph somewhat. The user doesn't want any full grid lines, but he does want a small crosshair (like a plus sign) drawn in each of the four quadrants. The CanvasDrawLine() function would be good for this, if it

  • Change image size in web display of SRM MDM 3.0

    Hello, how can I change the size of the displayed images in the catalog? I would like to display the image in the detail of the material data in the catalog larger. The images are stored in in the repository. Thanks for your help. melanie

  • Adjusting Column After Splitting a Cell

    Hello, I am new with Pages and am amazingly impressed with all that it does. Perhaps I am pushiing it a bit too far but when I split a cell into two cells I am not able to adjust the size of any of the two cells. Is this normal? Thanks in advance. Fa

  • How to use mathscript node in server side with the parameter from the client side

    I tried to develop a server/client system with some algorithms written in matlab. So I included a mathscript node on the server side. The client will send the parameter to the server. According to these parameters, the sever will call the matlab func