IP Address changes and Channel cache retains old IP

Hello,
I have sender and receiver File Adapters that send FTPs to a particular server ftp.xxxxxx.com. When that FTP server failed over this morning it used a new IP Address. So all my messages started to fail.
How can I create a File Adapter channel that will not cache the IP address?
Thanks,
Matt

Hi Matt,
Just u have to assigned the new server details in FILE Adapter.Then u have to activate the adapter.Also do the following steps.
1)Activate Cache Refresh IN ABAP Stack using SXI_CACHE
2)Select the Cache Notifications IN ID ENVIRONMENT Menu.
3)Do the Cache Connectivity Test IN RWB.
4)Stop and Start the FILE communication Channel IN RWB
And also check the cache refresh using Following URLs
http://hostname:50000/CPACache/refresh?mode=full
http://hostname:50000/CPACache/refresh?mode=Delta
Thanks
Ravi

Similar Messages

My email address changed and now I cannot remove it from cloud on my iphone 5s in order to back my phone up and download apps now

my email address changed and now I cannot remove it from cloud on my iphone 5s in order to back my phone up and download apps now

If you are trying to change the iCloud ID on yoru phone from an old ID ("email address") to your current ID, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

My email address changed and even though I have changed settings on my iPad and at the Apple store, my old email address comes up and asks for my password. The old password doesn't work so how do I eliminate that from my iPad and iPhone?

How can I change my Apple iCloud account information? My email address has changed and I've gone into settings to change the Apple I'd, my old email address pops up and asks me for a password before I can download apps, etc.

Sign out of old ID and sign in with new ID
Settings>iTunes & App Stores>Apple ID

Our home address changed and our AMEX card identity has been stolen. So when i edit to change my address and AMEX number it won't let me and get this message: "YOUR SESSION HAS TIMED OUT. TRY AGAIN. How do I access the store to change my account????

We moved and our address has changed. Also our AMEX card identity has been stolen twice and AMEX has changed our number and security code twice already. Now i am trying to edit my account at Itunes. Every time I try to edit our account at Itunes, I get this message: "YOUR SESSION HAS TIMED OUT. TRY AGAIN" Anything i am doing wrong? How do I get to the accounting department without getting this message?
Thanks

I am having this problem too. I recently changed ISP b/c I wanted the iPhone, so I had to update my iTunes username to my Gmail account.
In fact, I logged in HERE using it as my new Apple Id... so it works!
But for some **** reason that is driving me nuts my iPhone will not connect to the iTunes store using my new Apple Id. It keeps saying my email has changed or is invalid and asks me to sign in to change it. So I do that, and it lets me in USING MY NEW Apple ID!!!! Then I go back out to the buy the App and the madness starts all over.
Come on Apple, do you want me to buy your apps, or what?

My email address changed and my password and I did...

I had an account monis.bukhari
Someone stole my account and change the password and the email address
Please help me.

you need to contact the Skype customer service. Just click the link below, and click the email support button. Choose subjects Security & Privacy >> Identity theft / Account takeover.
https://support.skype.com/support_request
Moreover, you can visit the link below for suggestions on how protect your account and prevent similar incidents from happening in the future;
http://www.skype.com/intl/en/security/online-safety/
Note: if your account has a billing or purchase history in the last 6 months, you can request for a new password without the need of your registered email address. just click the link below;
https://login.skype.com/account/password-automation
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Skype email address changed and fraud transaction ...

Hi,
I am a member of skype with the profile name 'anoopsaha'. Yesterday, someone changed my registered email address on skype from <my_email_id>@gmail.com to <my_email_id>@gmail.com.tw. Furthermore, they also charged US $30 on my credit card. In addition, they have created a new account with my email address and the name of 'anoopsha', making sure that I cannot reach my original account.
Skype was my primary tool for business communication and I have lost all my contacts. Is there any solution to this problem?
Thanks and Regards,
Anoop

you can visit the link below for suggestions;
Suggestions on how to handle “Hacked Skype Accounts”
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

IP address changed and unable to connect to the java services?

Hi Guys,
we had installed PI 7.1 and everything is working perfectly fine. we have moved the system to the data center from our network. The server has been assigned a new IP address. All instances (ABAP+JAVA) have come up and i was able to login the ABAP stack.
But when i try to open http://hostname:50000/dir is not working and when i check in SMICM trace i am getting the error as conect to host:50000 failed check the host configuration .
I have also mapped the IP address to the host name in the host file but it did not help.
any help would be appreciated
Thanks,
Srini
Edited by: srinivas kapu on Dec 5, 2008 5:34 PM

Hi Bhargav,
Thanks for the quick reply. I am unable to connect to any java services like IR, ID, NWA etc with neither IP or FQDN. We did not had any issues previously with the FQDN and only change is now the IP address is changed.
Thanks,
Srini

Why do link addresses change, and how frequently does it happen?

I have several files on my Creative Cloud account which I share with clients with the links provided on the site by posting the link on my website. Those links keep breaking because the link to the file changes. How frequently does this happen? So I know when I need to go through and change them all over again.

Moving this discussion to the File Hosting, Syncing, and Collaboration forum.

IW31 and IW32 Partner Address Changes button

Hi all,
We want to restrict users from changing and viewing the partners' addresses that can be accessed via the Partner Address button under the "Partner" tab in transaction code IW32, but I don't believe there is an user exit/enhancement exit available for us to restrict this. I understand this address change will only apply to the work order itself, and won't affrect the master data, however, our users would like to restrict this function(partner address changes and view). Does anyone know of an user exit that I can use to restrict the partner addresses function using authorization objects or can this be handled via configuration, etc,? Or even, did anyone experience the same scenario and what did you do to handle this?
Your help on this is greatly appreciated! Thanks in advance for your help!
Best regards,
Cyanna

This can be done using Transaction variant and no need of programming.
check the Tcode SHD0.
Transaction Variants & Variant Transactions
Re: Transaction Variants

Moving Mail, Address Book and Keychains from Old Computer to New Computer

My issue: Moving mail, address book and keychains from Panther (old machine) to Leopard (new machine). Old machine (500mh G4 power pc) will not connect directly via firewire to new machine (iMac intel). So, I have to move the files manually via a firewire hard drive.
I am looking for a document that will tell me exactly which files to move. Can someone please help me find this document? Thank you. Dale
P.S. I have no issues with installing Leopard. I only need to move the mail, address book and keychains from old to new machine. No .mac account is available.

for address book: go to your old mac, launch ab, and go to file>export and export your contacts as vcards, select all cards before that, then bring that export file to the new mac, and launch ab there, then go to file>import as vcards and you should be set as far as contacts are, but not as far as groups if you have extensive groups. that would be the safe option. the other option is to go to homefolder/library/application support/address book and move that folder to the new mac. the only question i have is... is the database structure and files the same between panther and leopard, which is why i suggest the first option of import/export of vcards.
for mail, in your old panther go to homefolder/library/mail and move that mail folder to the new mac. make a copy of that folder, then move one copy to the same location in the new mac.
for keychain, in your old panther go to homefolder/library/keychain, you want to bring the file that is in that folder to your new mac. make a copy of that folder, then move one copy to the same location in the new mac.
once that is done, you may have to do some more steps with mail, once you launch mail, such as importing mailboxes. let me know if that is the case.
hope this helps

Customer address change: Audit issue

Hi All,
Although address is the only feild of customer master which if you change then the change is immediately effected in all preceeding and sussequent docs. Now the issus is:
A plant address changed and after 6 months when audit is been carried out and auditor printed invoice dated 7 months back then it came with new address of plant. He immediately raised an issue on this. Now although he was explained the technical behaviour of the address feild but functionally his issue cannnot be denied.
How do we handle and explain this. Is there any way that old address is assesed and used using some user exits. I mean to say validity period wise maintenance of addresses??????

Hi
It is not possible to maintain address as validity period. Print program is always considering the current address.

Address book and calendar sync from Mac to Google

Hi,
I have a HTC Desire phone and wish to sync my Contacts and Calendar items to it via Google.
I have pulled my Address Book and Calendar from my old p1i phone on to my old Power Book and exported these. I have then imported these onto my Macbook Pro running Snow Leopard.
I now want to sync these up to a Google account.
In my address I have ny contacts and also my girlfriend's. I wish to sync only my Contacts up to Google. Is this possible?
I have tried configuring iCal to sync with Google via calDAV but I am not seeing my Calendar entries in Google (or a way of doing a manual sync from Mac -> Google)
Apologies if these questions have been asked and answered previuosly.
Mike B.

This might be of interest for you
http://markspace.com/products/windowsmobile/mac/windows-mobile-sync-software.htm l

IP address changing

I made the mistake of getting BT Infinity when it became available in my area on the 28th May this year.
After many dsconnections an openreach engineer came out in mid July and spent 4 hours checking everything before realising that the initial installation hadnt done correctly in theh cabinet and that they hadnt put the new master socket on.
After more disconnections, most of which are only brief and a few more longer ones I contacted BT again and a second engineer called on the 20th August saying I had complained about a lack of speed. I told him that the speed was fine when it was connected but it dropped the connection sometimes and the main problem was that the IP address frequently changed, even if I hadnt noticed the orange ligh being on the router or it had stoped me surfing the web.
As I wanted to set up a FTP server, as I had done with previous ISPs, for family and friends to share files, I needed a stable IP address and I knew I had a dynamic address but that should stay the same unless I switch off or reboot the router. He checed everythinghe could and eve chnaged the new B home Hub 5 in case that had a fault that wasnt showing and thought that it may be a problem between the BT servers and the exchange as it showed on the schematic that BTs own diagnostic test had identified on the track a fault page as the building housing the server were outlined in red.
Needless to say it is still dropping occassionally and the IP address is constantly changing. I think it did keep the same IP for 48 hours once but usually it will change at least 3 or 4 tmes per day. Between 00.34 and 22.40 yesterday, the 22nd September, it has changed 9 times and had the orange light on the Home Hub 5 at least twice for several minutes, when I could neither send and receive emails or surf the web.
I went to check what was happening on the track a fault page and saw that even though this was an ongoing fault from the initial installation, there were two closed faults even though I was still waiting for BT support to call me back as promised last Saturday afternoon, they did call but hung up on me as soon as I had said "Hello" so I was expectin them to call back or email me.
I then sent a message using the contact us form on the BT site.
I was called this afternoon and was on the phone for the best part of 4 hours either talking to many different people at BT, waiting for them to call back or on hold, explaining over and over again that my main problem apart from the line disconnecting was the frequent changes of the IP address and if they could not provide a stable one that only changed when I switched the router off then I wanted to cancel without any penalties for early termination as there was a fault that BT could not fix.
I was told by one "technical" support guy that the IP can change every 24 hours, which I agreed that if it was set for a 24 hour lease period and I switched the router off and the lease expired before I switched it back on that it would change but that if the router was left on then it should not change while I was using it. Bearing in mind I have had this discussion many times over many months with various BT support personnel I have given them long enough and asked to be trasnferred to someone who could tell me if I could terminate my contract as BT was in breach of their contract to supply me with a stable connection.
He said he was transferring me, after 30 minutes on hold I ended up in the sales department where a very nice chap told me that he would transfer me back to technical again as they needed to put a note on my file saying what they had told me about being unable to provide a stable iP address and to then transfer me to the correct department. On hold again then explain everything agan etc etc then transfer to customer options where I was told I could cancle if I paid over £300 in fees or I could take out a business package to get a static IP.
I was also told that it was in the T and Cs that they did not have to provide me with a stable IP address. I asked him to send me an email with the part that said that and he said he will do that tomorrow and will also call me back tomorrow afternoon.
I have had a look on the T and Cs from a link on this site and using the find next box in internet explorer, there is no mention of IP or address, so I do not know where he will find the part about not having to provide a stable IP address.
I have tried to keep this as short as possible but as I have summarised and condensed 3 months worth of discussions into these few paragrpahs, it does appea to ramble on a bit, sorry.
Can anyone tell me definitively if I am correct in expecting BT to provide me with a connection that doesnt drop more times in just over the 3 months that I have been with them than in the previous 12 years I have had an internet connection with varous ISPs and aslo are they correct in stating that they do no have to provide an IP address that doesnt change even if I do not switch off or reboot the router as I am on a residentia package with a dynamic IP.
Thanks for hopefully taking the time to read through this post and for any help you can give me

Its not essentail that I have a static IP as its for personal use only not for a business but as you have stated it can take a while for the updated IP address to propogate and even if it instantly updated the new IP address I dont think anything would propogate quickly enough to be of any use when the IP can change as often as 9 times in less than 24 hours, as it did yesterday.
All I am asking for is an IP addresss that doesnt change unless I switch the router off or have a power cut. Surley that should be a simple enough thing to arrange.
I can even put up with the temporary connection drops, as long as they only last for a few minutes a few times a week and not as regularly as they are doing at the moment.
Could a mod please merge this thread with the other one in the Infinity section and place them both in the Infinity section as I would like to know if other Infinity users are having frequent I address changes and there is more chance of them seeing this thread and replying to it if it is in that section.
Thank you.

My Foscam IP Camera "times out" after one day - the IP address changes

Hey All,
I'm trying to set up my Foscam 8918 camera. I'm not so much concerened about being able to view it remotely as i can't even get the local (home) setup to work successfully for more than a day.
As far as I undertand it my IP address is dynamic and changes every day and I have to manually go into the foscam app and change the Local Camera Address 10.0.1.XX
Is there a way I can give the camera a static IP address? I've tried the port forwarding as instructed on this forum and I can't get it to connect.
Everything works until the IP address changes and then the camera times out.
Thanks for any insight.
I'm using the brand new apple router (the tower)
I'm using FoscamPro app on iphone 4S and ipad 2

In case you do want to be able to access your Foscam IP camera from the Internet. Note: I don't have this exact camera model, but the following worked for mine.
Camera Setup Part 1
Plug the camera into your router with your ethernet cable
Log onto the camera using the IP address given by the IP camera tool (IPCT) using the default login given on the bottom of the camera.
Choose Device Management, and then, Wireless LAN Settings.
Find your wireless network and input the login info.
The camera should now reset
802.11n AirPort Extreme (AEBSn) Setup (Note: I am assuming that you will be using version 6.x of the AirPort Utility from the iPad.)
Start the AirPort Utility > Select the (AEBSn) > Edit > Advanced > DHCP and NAT
Verify that the Router Mode = DHCP and NAT
From the DHCP and NAT window > Reservations > New Reservation...
Enter anything you like for the Description field.
Reserve address by: MAC Address
MAC Address: Enter the wireless MAC address of the IP camera
IPv4 Address: Enter the desired IP address you want reserved as a "Static IP" address for the camera. This address must be within the DHCP range of your AirPort. By default, this range is: 10.0.1.2 - 10.0.1.200.
Click Done
Go to the Advanced window > Port Settings > New Entry...
Entry Type: IPv4
Description: Leave blank or enter a desired description.
Public UDP Port(s): 8888
Public TCP Port(s): 8888
Private IP Address: Enter the Static IP address you created above.
Private UDP Port(s): 8888
Private TCP Port(s): 8888
Click Done
Allow the AEBSn to reset.
Camera Setup Part 2
Use the IPCT utility to obtain the network configuration settings.
Right (or Option)-click the IP address given in IPCT and choose Network Configuration.
Note these values. You may want to write them down.
Log onto the camera via a web browser, like Safari.
Go to Device Management > Basic Network Settings
Uncheck the box.
Input the settings from IPCT.
Verify that the port numbers used are the same as what you entered in the AirPort Utility's Port Mapping option.
Allow the camera to reset.
Optional, but recommended
Setup a Dynamic DNS account. This would take care of the issue of having a Dynamic WAN IP address that your ISP provides you. I would recommend DynDNS.
Go to https://www.dyndns.com/account/services/hosts/add.html
You will want to just set up a basic account.ollow the directions for setting up a basic account.
Once the account is set up, you will want to choose a web address to map directly to your camera. The Dynamic DNS service will assign a web address that will link to your Dynamic WAN IP address. The web address will stay the same even if the IP address changes.
When accessing the camera from a remote location, just tag on the port number to the web address. As as example, if the web address DynDNS assigns you is: www.myaddress.com, you would enter: www.myaddress.com:8888 into the web browser's address bar to access your camera.
Your camera should now be ready for both wireless access on your local network and from the Internet.

Address book and ical question

Just upgraded to a new version MacBook Pro. Where can I find my address book and Ical on my old computer to bring it over?
Thanks!

See the following:
Folders You Can Move to Your new Mac
From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
For FireFox:
/Home/Library/Applications Support/FireFox
/Home/Library/Preferences/org.mozilla.firefox.plist
Credit goes Macjack for this information.

IP Address changes and Channel cache retains old IP

Similar Messages

Maybe you are looking for