Ip address is not bound

I've been setting up a migration from NW to OES2 sp2. After some initial glitches, the NW server seems to be doing fine, but the oes server is still giving me grief. I get a mapping error in miggui when I configure the file system, but I can get around that with the nwmap command. I decided to run the NSA against the oes server and it gives me a critical message:
Product: OES2 Migration
Message: IP address is not bound on the server, ip: <ip address>
Then in the Warnings, under category Connectivity and product Network, I see:
"Basic Service Health; Review Changes in RPM Validation: sysconfig in network.txt"
Any ideas? I don't see any problem with networking through this IP. Should I check something in the config file under /etc/sysconfig/network? Thanks.

zenking,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Ejb3 bean not bound

Hi I am new to EJB . Now in our project we are using ejb3 and persistance. So tried
a simple program which I found out from net. But when I am trying to run I am getting
bean not bound. And in JBoss console it is showing error like
ObjectName: jboss.jca:service=DataSourceBinding,name=DefaultDS State: NOTYETINSTALLED
These are all my files.
Book.java
package de.laliluna.library;
import java.io.Serializable;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.SequenceGenerator;
import javax.persistence.Table;
@Entity
@Table(name="book")
@SequenceGenerator(name = "book_sequence", sequenceName = "book_id_seq")
public class Book implements Serializable {
     private static final long serialVersionUID = 7422574264557894633L;
     private Integer id;
     private String title;
     private String author;
     public Book() {
          super();
     public Book(Integer id, String title, String author) {
          super();
          this.id = id;
          this.title = title;
          this.author = author;
     @Override
     public String toString() {
          return "Book: " + getId() + " Title " + getTitle() + " Author "
                    + getAuthor();
     public String getAuthor() {
          return author;
     public void setAuthor(String author) {
          this.author = author;
     @Id
     @GeneratedValue(strategy = GenerationType.TABLE, generator = "book_id")
     public Integer getId() {
          return id;
     public void setId(Integer id) {
          this.id = id;
     public String getTitle() {
          return title;
     public void setTitle(String title) {
          this.title = title;
}BookTestBean.java
package de.laliluna.library;
import java.util.Iterator;
import java.util.List;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
@Stateless
public class BookTestBean implements BookTestBeanLocal, BookTestBeanRemote {
     @PersistenceContext(name="FirstEjb3Tutorial")
     EntityManager em;
     public static final String RemoteJNDIName = BookTestBean.class.getSimpleName() + "/remote";
     public static final String LocalJNDIName = BookTestBean.class.getSimpleName() + "/local";
     public void test() {
          Book book = new Book(null, "My first bean book", "Sebastian");
          em.persist(book);
          Book book2 = new Book(null, "another book", "Paul");
          em.persist(book2);
          Book book3 = new Book(null, "EJB 3 developer guide, comes soon",
                    "Sebastian");
          em.persist(book3);
          System.out.println("list some books");
          List someBooks = em.createQuery("from Book b where b.author=:name")
                    .setParameter("name", "Sebastian").getResultList();
          for (Iterator iter = someBooks.iterator(); iter.hasNext();)
               Book element = (Book) iter.next();
               System.out.println(element);
          System.out.println("List all books");
          List allBooks = em.createQuery("from Book").getResultList();
          for (Iterator iter = allBooks.iterator(); iter.hasNext();)
               Book element = (Book) iter.next();
               System.out.println(element);
          System.out.println("delete a book");
          em.remove(book2);
          System.out.println("List all books");
           allBooks = em.createQuery("from Book").getResultList();
          for (Iterator iter = allBooks.iterator(); iter.hasNext();)
               Book element = (Book) iter.next();
               System.out.println(element);
}BookTestBeanLocal.java
package de.laliluna.library;
import javax.ejb.Local;
@Local
public interface BookTestBeanLocal {
     public void test();
}BookTestBeanRemote.java
package de.laliluna.library;
import javax.ejb.Remote;
@Remote
public interface BookTestBeanRemote {
     public void test();
}client part--> FirstEJB3TutorialClient.java
package de.laliluna.library;
import java.util.Properties;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import de.laliluna.library.BookTestBean;
import de.laliluna.library.BookTestBeanRemote;
* @author hennebrueder
public class FirstEJB3TutorialClient {
      * @param args
     public static void main(String[] args) {
           * get a initial context. By default the settings in the file
           * jndi.properties are used. You can explicitly set up properties
           * instead of using the file.
            Properties properties = new Properties();
            properties.put("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
            properties.put("java.naming.factory.url.pkgs","=org.jboss.naming:org.jnp.interfaces");
            properties.put("java.naming.provider.url","localhost:1099");
          Context context;
          try {
               context = new InitialContext(properties);
               BookTestBeanRemote beanRemote = (BookTestBeanRemote) context
                         .lookup(BookTestBean.RemoteJNDIName);
               beanRemote.test();
          } catch (NamingException e) {
               e.printStackTrace();
                * I rethrow it as runtimeexception as there is really no need to
                * continue if an exception happens and I do not want to catch it
                * everywhere.
               throw new RuntimeException(e);
}I have created persistance.xml and application.xml under META-INF folder.
persistance.xml
<?xml version="1.0" encoding="UTF-8"?>
<persistence>
<persistence-unit name="FirstEjb3Tutorial">
<jta-data-source>hsqldb-db</jta-data-source>
<properties>
<property name="hibernate.hbm2ddl.auto"
value="create-drop"/>
</properties>
</persistence-unit>
</persistence>application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="5" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd">
     <display-name>Stateless Session Bean Example</display-name>
     <module>
          <ejb>FirstEjb3Tutorial.jar</ejb>
     </module>
</application>and in hsqldb-ds i have configured the driver and connection
<datasources>
   <local-tx-datasource>
      
      
      <jndi-name>ejb3ProjectDS</jndi-name>
      
      
      
     
     <connection-url>jdbc:hsqldb:data/tutorial</connection-url>
      
      <driver-class>org.hsqldb.jdbcDriver</driver-class>
      
      <user-name>sa</user-name>
      <password></password>
      
      
      
      
      
      <min-pool-size>5</min-pool-size>
      
      <max-pool-size>20</max-pool-size>
      
      
      
      <idle-timeout-minutes>0</idle-timeout-minutes>
      
      
      
      
      <track-statements/>
      
      
      <security-domain>HsqlDbRealm</security-domain>
      
      
      <prepared-statement-cache-size>32</prepared-statement-cache-size>
      
      <metadata>
         <type-mapping>Hypersonic SQL</type-mapping>
      </metadata>
      
      <depends>jboss:service=Hypersonic,database=localDB</depends>
      
   </local-tx-datasource>
   
   
   <mbean code="org.jboss.jdbc.HypersonicDatabase"
     name="jboss:service=Hypersonic,database=localDB">
     <attribute name="Database">localDB</attribute>
     <attribute name="InProcessMode">true</attribute>
   </mbean>
</datasources>.
Edited by: bhanu on Dec 2, 2008 9:45 AM

Hi jadespirit ,
I have the same problem in the same Book example ,my ejb3 project name "BaseHotele" so i follow what u said and this is my persistence.xml:
<?xml version="1.0" encoding="UTF-8"?>
<persistence>
<persistence-unit name="FirstEjb3Tutorial">
*<jta-data-source>java:BaseHoteleDS</jta-data-source>*
<properties>
<property name="hibernate.hbm2ddl.auto"
value="create-drop"/>
</properties>
</persistence-unit>
</persistence>
But it didn't work i have always HotelTestBean not bound!!
Help PLEASE i think that i had a mistake in the persistence.xml:i have 2 days searching for solutions without a good result!!!!!!!!!!!!!

XFA prefix not bound

Hi all,
I have a form in which I allow xhtml in the fields - however when I try to render it in Workspace I get an error which is caused by the following:
Caused by: com.adobe.livecycle.formsservice.exception.RenderFormException: xmldata: The prefix "xfa" for attribute "xfa:APIVersion" associated with an element type "body" is not bound., cause: The prefix "xfa" for attribute "xfa:APIVersion" associated with an element type "body" is not bound.
One field in my xml looks like this:
   body xmlns="http://www.w3.org/1999/xhtml" xfa:APIVersion= "Acroform:2.6.7120.0" xfa:spec="2.1">
   p style="margin-top:0pt;margin-bottom:0pt;line-height:12.75pt;
   text-valign:bottom;font-family:Verdana; font-size:9pt; color:#000080;      text-decoration:none"
Elm Street 2
   body
What should I do to fix this problem?
Please advice
Sincerely
Kim Christensen

Hi Jiandong
Did u check if datasource property of the form is properly bound to address node.
Or else there can be one more problem that u r writing the code for filling address in controller, so check the binding/ mapping of address node in controller and view.
Hope this helps.
Regards
Amita

URGENT HELP! - The prefix "xsi" for attribute "xsi:type" is not bound

Hi! i createD a WebService using the JWSDP 1.2. In the server-side i read a xml file, create another empty Document and using the importNode() method i populate the empty created doc. The problem is when i try to send client this created document. I'm using the DOMSource to send it to client side. Both client and WS method code are below! Does anyone know the answer??
And I'm getting this error:
[java] Endpoint address = http://localhost:8080/cm/ContextManager
[java] [Fatal Error] :2:42: The prefix "xsi" for attribute "xsi:type" is not bound.
[java] javax.xml.transform.TransformerException: org.xml.sax.SAXParseException: The prefix "xsi" for attribute "xsi:type" is not bound.
[java] at org.apache.xalan.transformer.TransformerIdentityImpl.transform(TransformerIdentityImpl.java:469)
[java] at contextclient.CMClient.main(Unknown Source)
[java] Caused by: org.xml.sax.SAXParseException: The prefix "xsi" for attribute "xsi:type" is not bound.
[java] at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1139)
[java] at org.apache.xalan.transformer.TransformerIdentityImpl.transform(TransformerIdentityImpl.java:452)
[java] ... 1 more
[java] ---------
[java] org.xml.sax.SAXParseException: The prefix "xsi" for attribute "xsi:type" is not bound.
[java] at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1139)
[java] at org.apache.xalan.transformer.TransformerIdentityImpl.transform(TransformerIdentityImpl.java:452)
[java] at contextclient.CMClient.main(Unknown Source)
====================CLIENT CODE================================
Source getdevice = manager.getDevice("How");
DOMResult domResult = new DOMResult();
// getting a transformation factory instance
TransformerFactory transformerFactory = TransformerFactory.newInstance();
Transformer transformer = transformerFactory.newTransformer();
transformer.transform(getdevice, domResult);
Node node = domResult.getNode();
DOMSource domSRC = new DOMSource(node);
StreamResult streamResult = new StreamResult(System.out);
transformer.transform(domSRC, streamResult);
===============================================================
===================WebService Method CODE======================
     public Source getDevice(String primaryContext)
          Source src = null;
          try
               String uri = "C:\\foo\\DeviceInstance.xml";
               DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
               DocumentBuilder builder = factory.newDocumentBuilder();
               //create the first Document
               Document doc1 = builder.parse(uri);
               //create the second Document
               Document doc2 = builder.newDocument();
               //create the second doc's root element and append it
               Element rootDoc2 = (Element)doc2.createElement("device");
               doc2.appendChild(rootDoc2);
               //get root of first document
               Element rootDoc1 = doc1.getDocumentElement();
               NodeList list = rootDoc1.getElementsByTagName(primaryContext);
               for(int i = 0; i < list.getLength(); i++)
                    Element nodeToMove = (Element) list.item(i);
                    Node newNode = doc2.importNode(nodeToMove, true);
                    rootDoc2.appendChild(newNode);
               src = new DOMSource(doc2);
          catch(DOMException dome)
               dome.printStackTrace();
          catch(Exception e)
               e.printStackTrace();
          return src;
===============================================================
Does anyone know what could it be? Please, it's very urgent!
Tks in Advance,
Rodrigo.

The xml i'm trying to send is below. It's important explain that in a standalone app it works perfectly. Unfortunately, when i perform the same actions in the WS world, it doesn't work. See, i tried to put the attributes inside the root element with the setAttributeNS() method but i got the same error again. How could i bound the attribute with no errors like that said before???
<?xml version="1.0" encoding="UTF-8"?>
<device xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="context.xsd">
<Identity xsi:type="fooType">
               <Name>
                    <GivenName>Rodrigo</GivenName>
                    <FamilyName>Felicio</FamilyName>
               </Name>
          </Identity>
<Identity xsi:type="foowType">
               <DeviceID>dev00345</DeviceID>
          </Identity>
</device>
Regards,
Rodrigo.

Create Activity : result attribute is showing BTSubject is not bound.

Hi,
When we are creating activity we need to show two standard ddlb i.e., reason and result. with the help of configuration we added these two fields but only reason ddlb is showing list of values but result ddlb is totally non editable and when we are searching activities itu2019s showing BTSubject is not bound. How can I select correct field in configuration or is there any solution to enable this fields
Reason ddlb technical information
BT126H_APPT
view : BT126H_APPT/ApptDetails
context node : BTSUBJECTF
attribute : STRUCT.CONC_KEY
Result ddlb
context node : BTSUBJECTG
attribute : STRUCT.CONC_KEY

Kumar,
I suggest you search SAP Notes with keywords like 'BTSUBJECTG' and 'BTSubject is not bound'. There are quite a few issues about reason and result fields and some note must have already addressed this standard issue.

BuilContactPersonAddress not bound

Hi All ,
We are working on SAP CRM 7.0 EHP2. In account identification screen,while searching account no,"BuilContactPersonAddress not bound" error is shown for the fields for which data is not maintained.
We tried to implement SAP NOTE 0001310136,0001386070 but system displayed not a valid correction while implementing the note.
Please let ne know what is the issue?
Regards,
Moumita

Hi Moumita,
Its not an error. Its just an information which states that BuilContactPersonAddress is not bound which means its not able to bind with the Address node of the Contact Person because it doesn't exist. Once you have maintained the Address for the Contact Person and there's an address no. in the database for that Contact Person, you'll not see this message.
Thanks
Vishal

NDPS Printer not bound on Novell 6.5 SP8

I am running NETWARE 6.5 SP8 with server on IP 192.168.0.100
Host on ETC is updated with the right IP info.
I have a print server from Trendnet that use to work fine under Novell 5.0 at 192.168.0.4
So I tried to use the same setup on NDPSM version 3.03b: Novel Printer Gateway
Novell Port manager, Remote Printer LPR/TCPIP, Address: 192.168.0.4 Port: Passthrough.
I pinged from the server to 192.168.0.4 and see the print server.
Why is my printer agent for this remote printer staying on "Not Bound" status?

You might try the iPrint forum for this one iPrint

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

ORA-01008 All variables are not bound

Hi I am running this query and getting this exception ORA-01008 All variables are not bound .
Could anyone please insight ?
SELECT EQMT_INGT_LOG_ID, EQMT_ID,
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML
FROM TOS_EQMT_INGT_LOG ingLog
where BUCK_SLIP_XML is not null and ingt_date between to_date(:fromDate, 'MM/DD/YYYY HH24:MI')
and to_date(:toDate,'MM/DD/YYYY HH24:MI' )
and eqmt_id in (select eqmt_id from tos_eqmt
where eqmt_init = :eqmtInit and eqmt_nbr = :eqmtNbr
and orig_loca_id in (select loca_id from tos_loca where altn_src_sys_stn_id = :circ7 ))
and SCAC = :scac
and STCC = :stcc
and SHPR_NAME = :shprName
and CNSE_NAME = :cnseName
and driv_id in (select driv_id from tos_driv where lcns = :lcns )
and driv_id in (select driv_id from tos_driv where sabv = :sabv )
and ingt_stat_ind = :ingtStatInd
and BUCK_SLIP_XML like :inspectedBy
ORDER BY INGT_DATE

Slightly off-topic but what do you think this does :
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML?

HT202570 My buisness address does not show up on apple maps as a correct address. The address is 1351 summit drive jasper AL 35501 and we have been here for 8 years.

I have been at my buisness for 8 years and the address does not show up as an address in apple maps on any of my devices. How can I fix this? My address is 1351 summit drive jasper al 35501.

@Kilgore-Trout, there is no "contact us" at the bottom of the Apple Map. All I get is report the problem...move the pin, which I have done numerous times. Google maps gets it right & due to that fact, we have to tell vendors to NEVER use Apple Maps when getting directions for deliveries. I love apple, own all their products and now my BMW i3 is using their maps & I would love to have them be responsive.

Trying to email file from adobe reader 11.0 email addresses will not longer auto complete after moving to office 365

trying to email file from adobe reader 11.0 email addresses will not longer auto complete after moving to office 365. It did work with older versions of outlook. Tried changing to global address book. It will only access global address book offline

I have the same issue. On a clean machine with Office 2013 64 bit installed.

Ship to party Address is not Printing-Script

Hi All,
We are facing a problem for a particular PO.
When we see the print preview for a particular PO for the first time Ship to party address is not printing .Whereas in the next time if we see the print preview its showing that address.Its because while runing for first time there is no value in w_adrc(work area) when that ship to party window .after that one perform is called at that time values are populated for w_adrc so when we runing for the second time its showing that value.Whereas we have faced another problem in another one PO.In that there was no value for w_adrc while that ship to party window called but its showing value in the print preview(w_adrc value is populate after that window called from a perform )Why it is like this?
Kindly help me in this issue..
Thanks.
Raj.

Hi Raja,
In my project we are also facing same problem. are u able to find the solution for this problem.Please reply to me ASAP.

Ship to party Address is not Printing

Hi All,
We are facing a problem for a particular PO.
When we see the print preview for a particular PO for the first time Ship to party address is not printing .Whereas in the next time if we see the print preview its showing that address.Its because while runing for first time there is no value in w_adrc(work area) when that ship to party window .after that one perform is called at that time values are populated for w_adrc so when we runing for the second time its showing that value.<b>Whereas we have faced another problem in another one PO.In that there was no value for w_adrc while that ship to party window called but its showing value in the print preview(w_adrc value is populate after that window called from a perform )</b>Why it is like this?
Kindly help me in this issue..
Thanks.
Raj.

Hi Raja,
In my project we are also facing same problem. are u able to find the solution for this problem.Please reply to me ASAP.

Problem in WEB-UI field (Not Bound)

Hi Experts,
   I am new to CRM Technical, I have added new standard field (Date Of Birth) thourgh component work bench 'BSP_WD_CMPWB' in 'Z_IC_AGENT' business role. after execution this business roles i could able to see this DOB field but its showing with 'NOT BOUND'
1.   Can any one suggest me why that newly added field showing like that? Do i need to add any other setting or coding ?
2.   How to add new Z field in this business role. Please tell me the right procedure.
Thanks & Regards,
Ramesh.

Hi Ramesh,
please open you component in transaction BSP_WD_CMPWB.
Go to the contextnode where you added your attribute.
Open the GET_ Method of your attribute and set here an external breakpoint.
Now go back to the webclient UI, restart it and try again.
You will stop at your breakpoint and you will be able to debug your issue.
Kind regards
Manfred

Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

Reset your modem.

Ip address is not bound

Similar Messages

Maybe you are looking for