IP Pool doesn't apply the DNS configuration to Linux based vm

Hi,
Under scvmm 2012r2, I created a IP Pool in my virtual switch as follow :
IP subnet : 192.168.1.0/24 (192.168.1.100 to 192.168.1.200)
Gateway : 192.168.1.1
DNS : 192.168.1.2, 192.168.1.3
Then I created some templates using the IP Pool. From these templates, when I created a Windows vm, all is OK. When i created a Linux based vm like RHEL6, only the IP address and gateway were applied. The DNS setting was missing in the new created
vm.
Thanks for your help !
zt

Hello,
Here is the output of resolv.conf :
# Generated by NetworkManager
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com
Output of the log :
2014-04-09T08:25:31,619Z Trace      [scx.vmmguestagent.osspecializationreader:427:1589:140519122646816] DNS Search Suffix read as: test.com
2014-04-09T08:26:34,209Z Trace      [scx.vmmguestagent.osspecializationreader:427:1623:139799840220960] DNS Search Suffix read as: test.com
2014-04-09T08:26:38,234Z Info       [scx.vmmguestagent.osconfigurator.networkconfigurator:235:1623:139799840220960] Shell Command:/opt/microsoft/scvmmguestagent/bin/cfgnetadapter macaddress=00:1D:D8:B7:1C:20 ipv4addresstype=static
ipv4address=192.168.1.133/24 ipv6addresstype=dhcp gateways=192.168.1.1, nameservers=192.168.1.2,192.168.1.3, dnssearchsuffix=test.com,
Thanks
zt

Similar Messages

[SOLVED] Gnome doesn't apply the theme to new opened windows

Hi,
I'm using Gnome as desktop environment, but encountered a really annoying issue .
I want to change the theme and therefore do the following "Right click on desktop -> "Change desktop background" -> Theme -> "Darklooks". All opened windows (as well as the panels) get now dark, just as expected. But as soon as I open up a new windows (or add something to a panel) it doesn't get affected by the theme, but it is display with the standard bright grey. After changing the theme again (I have to choose another first, and then go back to "Darklooks") all "new" windows get dark also.
As I'm not happy with this situation I ask you for help? What is wrong with my Gnome?
Last edited by johnpatcher (2009-09-05 19:37:14)

I furthermore found out that this bug is already reported: http://bugzilla.gnome.org/show_bug.cgi?id=540796

11gr2 Rac Install: Stuck at the DNS SCAN portion.

Hi Guys, it's Xev.
Ok, I have followed his install guide to the dot. http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-oel5-using-virtualbox.php#install_grid_infrastructure
During the Grid Infrastructure install portion, it's stops me and tells me that "No Locally adapter is defined" when I am right here, it won't let me past this point right below...
http://www.oracle-base.com/articles/11g/images/ol5-112-rac/47-grid-ssh-connectivity.jpg
Now, this install document, tells you to put the 3 SCAN Ip addresses in the /ect/hosts file and does not tell you that you need to install DNS on a server and configure it, or does he? The way he says it to
me just doesn't make sense.
My question is to only people that have actually installed 11gr2 RAC using VirtualBox and using oracle linux 5.8.
He says in the install document this right here, but some how i think he is just flat out wrong.
I quote from the install document,,,
If you are not using DNS, the "/etc/hosts" file must contain the following information.
127.0.0.1 localhost.localdomain localhost
# Public
192.168.0.101 ol5-112-rac1.localdomain ol5-112-rac1
192.168.0.102 ol5-112-rac2.localdomain ol5-112-rac2
# Private
192.168.1.101 ol5-112-rac1-priv.localdomain ol5-112-rac1-priv
192.168.1.102 ol5-112-rac2-priv.localdomain ol5-112-rac2-priv
# Virtual
192.168.0.103 ol5-112-rac1-vip.localdomain ol5-112-rac1-vip
192.168.0.104 ol5-112-rac2-vip.localdomain ol5-112-rac2-vip
# SCAN
192.168.0.105 ol5-112-scan.localdomain ol5-112-scan
192.168.0.106 ol5-112-scan.localdomain ol5-112-scan
192.168.0.107 ol5-112-scan.localdomain ol5-112-scan
Note. The SCAN address should not really be defined in the hosts file. Instead is should be defined on the DNS to round-robin between 3 addresses on the same subnet as the public IPs. For this installation, we will compromise and use the hosts file. This is not possible if you are using 11.2.0.2 onward.
If you are using DNS, then only the first line needs to be present in the "/etc/hosts" file. The other entries are defined in the DNS, as described here. Having said that, I typically include all but the SCAN addresses..
END QUOTE.
So, Guys, what does he actually mean with this? MY Grid install fails when it's trying to resolved the scan. DO I need to install DNS like he gives in the link above, OR can the install work with the SCAN in the /ect/hosts file? I Personally think this is just wrong, and you have to have DNS working 3 ip round-robin for the SCAN to work.
Please only reply to this thread if you have actually successfully installled 11rg2 Rac (11.0.1) on Oracle Linux 5.8 using VirtualBox, or actually know where i am going wrong by your own experience, not just goggle searching.....but you got it to work....
I am begging on my knees for help with this, since I have been at this for weeks now.
If you help me through this, I'll be your friend
Xev.

Hi Shivendra,
I followed the instructions on shivenracdba: configure DNS for Installtion of Oracle Grid Infrastructure RAC cluster
named starts right up with no errors, but when i try to do the nslookups for both nodes and the scan cluster it fails with these errors...
This is what happens on rac, the primary node.
[oracle@rac1 grid]$ nslookup rac
;; Got SERVFAIL reply from 192.168.72.129, trying next server
;; Got SERVFAIL reply from 192.168.72.129, trying next server
Server:         192.168.72.128
Address:        192.168.72.128#53
** server can't find rac: SERVFAIL
[oracle@rac1 grid]$ nslookup rac2
;; Got SERVFAIL reply from 192.168.72.129, trying next server
;; Got SERVFAIL reply from 192.168.72.129, trying next server
Server:         192.168.72.128
Address:        192.168.72.128#53
** server can't find rac2: SERVFAIL
[oracle@rac1 grid]$ nslookup rac-cluster-scan
;; Got SERVFAIL reply from 192.168.72.129, trying next server
;; Got SERVFAIL reply from 192.168.72.129, trying next server
Server:         192.168.72.128
Address:        192.168.72.128#53
** server can't find rac-cluster-scan: SERVFAIL
This is what happens on rac2, the secondary node.
[oracle@rac2 ~]$ nslookup rac
;; Got SERVFAIL reply from 192.168.72.129, trying next server
;; Got SERVFAIL reply from 192.168.72.129, trying next server
Server:         192.168.72.128
Address:        192.168.72.128#53
** server can't find rac: SERVFAIL
[oracle@rac2 ~]$ nslookup rac2
;; Got SERVFAIL reply from 192.168.72.129, trying next server
;; Got SERVFAIL reply from 192.168.72.129, trying next server
Server:         192.168.72.128
Address:        192.168.72.128#53
** server can't find rac2: SERVFAIL
[oracle@rac2 ~]$ nslookup rac-cluster-scan
;; Got SERVFAIL reply from 192.168.72.129, trying next server
;; Got SERVFAIL reply from 192.168.72.129, trying next server
Server:         192.168.72.128
Address:        192.168.72.128#53
** server can't find rac-cluster-scan: SERVFAIL
Now, this is what I for all the files that I have configured......I hope they are right?
Do i need to run the named DNS server on both nodes? It's running on both nodes now...and the service starts..
Here are all my files that pertain to the DNS configuration for RAC.
These are the files that are on "rac" the primary node....
[root@rac1 named]# cat forward.zone
$TTL 86400
@          IN     SOA    rac. rac. (
                         42 ; serial (d. adams)
                         3H ; refresh
                        15M ; retry
                         1W ; expiry
                         1D ) ; minimum
@          IN   NS     rac.
rac       IN   A      192.168.72.128
localhost                     IN A    127.0.0.1
rac2                          IN A    192.168.72.129
rac-vip                       IN A    192.168.72.102
rac2-vip                      IN A    192.168.72.104
rac-cluster-scan              IN A    192.168.72.106
rac-cluster-scan              IN A    192.168.72.107
rac-cluster-scan              IN A    192.168.72.108
[root@rac1 named]# cat reverse.zone
$TTL 86400
@        IN     SOA    rac. rac. (
                         42 ; serial (d. adams)
                         3H ; refresh
                        15M ; retry
                         1W ; expiry
                         1D ) ; minimum
@         IN   NS   rac.
128.72.168.192      IN   PTR rac.
1.0.0.127           IN   PTR localhost.
129.72.168.192      IN   PTR rac2.
102.72.168.192      IN   PTR rac-vip.
104.72.168.192      IN   PTR rac2-vip.
106.72.168.192      IN   PTR rac-cluster-scan.
107.72.168.192      IN   PTR rac-cluster-scan.
108.72.168.192      IN   PTR rac-cluster-scan.
[root@rac1 named]# cat named.rfc1912.zones
zone "rac" IN {
                 type master;
                 file "forward.zone";
zone "72.168.192.in-addr.arpa" IN {
                 type master;
                 file "reverse.zone";
[root@rac1 named]# cd /var/named/chroot/etc
[root@rac1 etc]# ls
named.conf
[root@rac1 etc]# cat named.conf
options {
listen-on port 53 { 192.168.72.128; };
# listen-on-v6 port 53 { ::1; };
        directory "/var/named";
        recursion yes;
logging {
        channel default_debug {
        file "data/named.run";
        severity dynamic;
include "named.rfc1912.zones";
[root@rac1 etc]# cat /etc/resolv.conf
# Generated by NetworkManager
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com
search rac2
search rac
nameserver 192.168.72.129
nameserver 192.168.72.128
and this is the content of my /ect/hosts file on rac, the primary node.
[root@rac1 etc]# cd /etc
[root@rac1 etc]# cat hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1               rac1.localdomain rac1 localhost.localdomain localhost
::1             localhost6.localdomain6 localhost6
#eth1 - PUBLIC
192.168.72.128 rac
192.168.72.129 rac2
#VIP
192.168.72.102 rac-vip
192.168.72.104 rac2-vip
#eth2 - PRIVATE
192.168.140.128 rac-pvt
192.168.140.129 rac2-pvt
These are the files that are on "rac2" the secondary node....
[root@rac2 named]# cat forward.zone
$TTL 86400
@          IN     SOA    rac. rac. (
                         42 ; serial (d. adams)
                         3H ; refresh
                        15M ; retry
                         1W ; expiry
                         1D ) ; minimum
@          IN   NS     rac.
rac       IN   A      192.168.72.128
localhost                     IN A    127.0.0.1
rac2                          IN A    192.168.72.129
rac-vip                       IN A    192.168.72.102
rac2-vip                      IN A    192.168.72.104
rac-cluster-scan              IN A    192.168.72.106
rac-cluster-scan              IN A    192.168.72.107
rac-cluster-scan              IN A    192.168.72.108
[root@rac2 named]# cat reverse.zone
$TTL 86400
@        IN     SOA    rac. rac. (
                         42 ; serial (d. adams)
                         3H ; refresh
                        15M ; retry
                         1W ; expiry
                         1D ) ; minimum
@         IN   NS   rac.
128.72.168.192      IN   PTR rac.
1.0.0.127           IN   PTR localhost.
129.72.168.192      IN   PTR rac2.
102.72.168.192      IN   PTR rac-vip.
104.72.168.192      IN   PTR rac2-vip.
106.72.168.192      IN   PTR rac-cluster-scan.
107.72.168.192      IN   PTR rac-cluster-scan.
108.72.168.192      IN   PTR rac-cluster-scan.
[root@rac2 named]# cat named.rfc1912.zones
zone "rac" IN {
                 type master;
                 file "forward.zone";
zone "72.168.192.in-addr.arpa" IN {
                 type master;
                 file "reverse.zone";
[root@rac2 etc]# cat named.conf
options {
listen-on port 53 { 192.168.72.129; };
# listen-on-v6 port 53 { ::1; };
        directory "/var/named";
        recursion yes;
logging {
        channel default_debug {
        file "data/named.run";
        severity dynamic;
include "named.rfc1912.zones";
[root@rac2 etc]# cd /etc
[root@rac2 etc]# cat resolv.conf
# Generated by NetworkManager
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com
search rac2
search rac
nameserver 192.168.72.129
nameserver 192.168.72.128
[root@rac2 ~]# cd /etc
[root@rac2 etc]# cat hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1               rac2.localdomain rac2 localhost.localdomain localhost
::1             localhost6.localdomain6 localhost6
#eth1 - PUBLIC
192.168.72.128 rac
192.168.72.129 rac2
#VIP
192.168.72.102 rac-vip
192.168.72.104 rac2-vip
#eth2 - PRIVATE
192.168.140.128 rac-pvt
192.168.140.129 rac2-pvt
That is everything on both nodes...
Shivendra, what am I to do??

Noise reduction works in preview but doesn't apply to file

I have a file that I would like to apply noise reduction to. So in the tasks menu I click Clean Up Audio, then under Noise I click Noise... From there I can play with the Noise settings and get it to clean up nicely. But when I hit OK, it doesn't apply the noise reduction. It seems to be doing something to the audio because the waveform changes.. just not reducing the noise as previewed. Anybody know why it wouldn't be applying the effect? Other audio editing options seem to work just fine.

It is a 16 bit 44.1 kHz mono sound effect.. it is noisy and sounds like it could have been 8 bit at some point in its life cycle.

ODBC DNS Configuration Error IM002 10040

1. When logging in to analytics with Weblogic user:
Unable to Sign In
An error occurred during authentication. Try again later or contact your system administrator.
2. Weblogic user is abel to log in to the console and em successfully.
3. This is not a GUID issue
4. This is an issue with the DNS configuration, What value is it looking for? How do I properly set the DNS
5. I have reviewed Note:1554245.1, the Solution makes sense, however I do not know how to resolve the correct <DNS> parameter value .
Error:
[tid: 1732] Error retrieving user/group data from Oracle BI Server's User Population API.
Unable to create a system user connection to BI Server while running user population queries
Odbc driver returned an error (SQLDriverConnectW).
State: IM002. Code: 10040. [NQODBC] [SQL_STATE: IM002] [nQSError: 10040] The requested data source name is either not found, incomplete, or incorrect.

Here is the entry in the InstanceConfig.xml file
<DSN>coreapplication_OH647982366</DSN>
How does that map to an DSN entry? Is that the Name of the entry? Because I dont have an entry with that name. And yes, the OBI enrties I have work.
I've looked at my other working enviornments trying to figure out what this entry should be and the DSN entry is not in the System DSN list there either.
<DSN>coreapplication_OH1527389259</DSN>
What is it looking for? The OBIEE metadata repository?
Can someone explain how obiee validates the user and credentials?

Where is old DNS configuration stashed?

I upgraded my Mac Mini Server to OS X Mavericks and then downloaded to OS X Server application. All the DNS configuration data has gone missing. Does anyone know where the old data has been stashed?
My home network is relatively small but it is still a pain to need to manually regenerate my local zone files.

I upgraded my Mac Mini Server to OS X Mavericks and then downloaded to OS X Server application. All the DNS configuration data has gone missing. Does anyone know where the old data has been stashed?
My home network is relatively small but it is still a pain to need to manually regenerate my local zone files.

PPP-assigned DNS Configuration

I am using wvdial and it successfully connects to the Internet but then it gives this error: "Timeout waiting for the PPP-assigned DNS configuration." I searched the web for this and found a Russian website and a Spanish website. I can read neither.
How do I set up PPP to give the DNS configuration to wvdial? I know what DNS addresses I want to use, but not how to implement them. I put them in /etc/resolv.conf as "nameserver IP". What do I put in for the "search <domainname>" line?

But it does not work! I have resolv.conf set up like I said, with no search line, but I get that "Timeout..." error. wvdial does successfully connect to the Internet, but none of my programs realize this. I can not ping anything. I know I am connected to the Internet because the modem makes its usual sounds as it connects and when I pick up a telephone I get the usual screeching noise, but nothing responds to the connection! I simply assume that this timeout error is the cause because I see no other errors.

DNS configuration for GSS

Hi,
I am newbee to GSS. I would like to deploy the GSS in my datacenter.
I would like to know the DNS configuration example for domain.
ex:
www.abc.com
What records need to configured with detail script. beacause i dont have experience in DNS server configuration.
I am looking for positive update.
Regards
sateesh kumar.k
i

Typical flow is as follows
1. Client will hit their DNS servers (configured on their machines as primary/backup dns server).
2. "Client's DNS server" will query "DNS server authoritative for abc.com" for www.abc.com.
3. "DNS server authoritative for abc.com" will ask "client's DNS server" to query "GSS - Authoritative for www.abc.com"
4. "Client's DNS server" will query GSS for www.abc.com.
5. GSS will send the ip add of www.abc.com (which should be configured on ACE as VIP).
6. "Client's DNS server" will handover this VIP to client
7. Client will hit the VIP configured on ACE (for application www.abc.com).
Syed iftekhar Ahmed

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...

I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene

Can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

Why doesn't LDAP Priority and Weight change entry in the DNS?

We have two Windows 2008 servers that are Active Directory Domain Controllers. They seem to be configured properly, and are talking to each other.
I want one of the domain controllers to authenticate all of the logins because it's a more powerful box. I want the second DC to take over if the first goes down.
I went into the Registry on the old machine, and created two 32 bit Dword registry keys as follows:
HKLM\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters.
LdapSrvPriority
and
LdapSrvWeight.
Set these to 5 and 150. Assumed the default on the faster server was 0 and 100, thus making the newer server the default choice for logon authentication.
Rebooted server. Checked DNS, and it still is reporting 0 100 for both servers, and doing an
echo %LOGONSERVER% on various workstations seems to show that authentication is roundrobining between both servers.
Why aren't these settings sticking? And why weren't they in the registry when I started?Thanks

Hi,
I tested and DNS record changed as expected.
So please make sure DC you changed point to the DNS that you check. Because there will be some delay before records replicated to another DNS.
You can also check timestamp of the record if it is the latest change.
You can trigger a DNS registration manually:
How To Reregister SRV records of a Domain Controller In DNS Zone
http://support.microsoft.com/kb/556002
Hope this helps.

Internet sharing works but the DNS part doesn't

I'm posting this message because I believe it is a bit different from other 'Lion internet sharing' posts in terms of the source of sharing and also the results I get.
Similar to other users experiencing the same problem, my internet sharing setup stopped working as expected after upgrading to Lion. However, I can't say it stopped working completely. It still does work but the DNS part doesn't. This means I can still perform pings, ssh and socket connections from computers using the shared connection. But I cannot browse the internet because web site names can't be resolved.
For example, my MacPro has two Ethernet interfaces. On one of them (en0) I vpn when connecting to work using a VPN service I created via System Preferences => Network. I used to share that VPN connection to computers using the 2nd one (en1). The other computers are linked to (en1) through a multiport hub. This setup used to work flawlessly in Snow Leopard and multiple users could use the shared vpn internet connection.
After the upgrade to Lion I can still see other computers on the local network and also ping any external internet site. I can even use Safari and navigate my ISP's home page using its IP address only. However, DNS doesn't work and internet domains cannot be resolved by name so internet browsing is not possible.
Furthermore, when I don't VPN to work but simply share the connection to the internet from (en0) to computers using (en1) everything works as it used to in Snow Leopard. The difference here is that the same DNS servers are used by both network services.
So far I'm stuck with these findings and I don't know where else to look for answers. Any input or feedback is greatly appreciated.

I've to admit that i don't even know what VPN means.. but..
I have an 27" iMac (mid 2010), a iPhone 4 and a Macbook Pro 13" (mid 2009) .. and i used to share my ethernet connection to wi-fi on Snow Leopard. Since i upgraded to Lion (i'm using it since the first DP, and i think the internet sharing was working under the 1st DP .. i'm not pretty sure), it just doesn't work.
Just like solongpc, it does activate the internet sharing, my other devices can see and connect but neither of then (my iMac - host or my mbp and iphone) can navigate on the internet. And when i turn off my internet sharing (on my iMac), it still not acessing any website.. and i've to restart my moden.

How can i configure maps voices? I have the original configuration (standard) and doesn't work

Hi
I have an Iphone 5 and doesn't work the voices for navegation (maps app)
Is there any special configuration requiered
This feature is very important due i could drive without looking at the phone
Thanks in advance for your support

Thanks!!
Yes, I'm in Chile....sad to hear that this feature is not available everywhere... Those voices should just follow the indications given by maps because maps gives the info about turn left or right so there should be just voices recorded with those standard indications, then this feature would be available everywhere
But OK...
Anyways, Thanks for your answer!!!

Where does the ACS server get the DNS info for IP pools?

I am trying to change the DNS servers that my VPN users are assigned from the IP pools on the ACS server. Where does the IP pools get the DNS server information. I have changed the DNS Ips on the windows server and rebooted. But the VPN clients are still being assigned the old DNS servers.

ACS ip pools do not push DNS server information
It is either being forwarded from VPN concentrator group setup or
it is being send from ACS user/group setup > Radius(VPN 3000) attributes > [026/3076/005] Primary-DNS.
Hope this helps.
Regards
Rohit

Why doesn't the "Command Number" keyboard shortcut apply the colored label to the selected image?

Why doesn't the "Command Number" keyboard shortcut apply the colored label to the selected image? The similar keyboard shortcut to assign stars works, but the shortcut to assign a label color doesn't?

Just to be sure they haven;t been reassigned in your Aperture go to Aperture->Commands->Customize then in the search box in the upper right hand corner enter color.
You should see the keyboard shortcuts and the corresponding add label commands.
If they are set then quit Aperture move you preference file to the desktop and restart Aperture. The instructions for moving the preference file can be found at Aperture 3: Troubleshooting Basics
Post back the results
Message was edited by: Frank Caggiano - Added preference file move

IP Pool doesn't apply the DNS configuration to Linux based vm

Similar Messages

Maybe you are looking for