Ip4300 on OSX - some text still muted-colour in grayscale

Been using my ip4300 happily for years. It's linked via USB to my Mac mini running OSX 10.8.4.
Suddenly, my grayscale setting, which I use to print occasional emails, text docs, etc, still prints the majority of text in black, but some heads etc are in a muted green colour.
For example, just printed an email, where the "To" and "ReplyTo" headers are in this green, as well as the head date.
Very odd.
Any idea how to get me back to all-black again?

It is unusual that you are getting a muted green colour. This would require the cyan and yellow ink to mix, which should not happen with the Grayscale setting selected.
I just tested printing a message from Mail to an MG6360 and the "To:" and "Cc:" headers and the date all printed as gray, but using black ink only. Using a Lupe, I could not see any other colour being used.
Can you confirm the driver version being used by the iP4300. You can do this by opening Print & Scan, selecting the iP4300 and pressing Options & Supplies. With the General tab selected, you will see the driver version. Is it v10.67.1.0?
And when you are printing from the application where you see this issue, if you select the Color Matching menu, is Canon Color Matching selected?

Similar Messages

Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

Fonts used in some text layers not available...

I've been gettting the following message lately when opening Photoshop files at work: "Fonts used in some text layers are not available for activation. You will need to replace these fonts before the layers can be used for vector based output".
But when I check my text layers, there are no indications that any fonts are missing. I double click on every text layer to see what font is being used and double check Suitcase Fusion to make sure it is activated.
I'm using OSX Maverick 10.9.2. I'm using Suitcase Fusion 5 version 16.2.0. And I'm using Photoshop CC 14.2.1. It's more of an annoyance than anything, but would like to know why it keeps telling me fonts are not available when they are currently activated in Suitcase. Not sure if it's an Adobe issue or a Suitcase Fusion issue.
Anyone have any ideas on this?
Thanks!
Steve

DrStrik9, I opened up the file, clicked on each text layer and selected all to make sure there wasn't any character using a different font. There wasn't. I clicked on the font being used, tried changing it to a different font, then back to the font that was being used. I saved and closed the file, then reopened it, and that seemed to cure it for that file. Not an efficient way to go about it though.
I then tried another file that was giving me the same error, clicked on each text layer, changed the font to a different one, then back to what was being used, saved, closed and reopened it, and still got the same message. So it didn't work for that one. I then tried changing the font to a system font, Times Bold true type, saved, closed, reopened, and got the message again. So not sure what is going on. The fonts used in the first file were DIN and DINEngschrift postscript font, which were loaded and active in Font Fusion.
The 2nd file I tried was using Gotham Bold postscript font, which also was active in Font Fusion. I've run Font Doctor on the fonts and found no issues.
Even though I'm getting the error message when I'm opening these files, none of the text layers have that Exclamation point indicating there is an issue with the layer, so it would seem the text layers are fine. Just really annoying to get that error every time I open the file.
Another thing I tried is I created a new Photoshop file and just made some text layers using Gotham Bold. Saved, closed and reopened the file and did not get the message. So, I don't know why I would get it with one file and not another. Very confusing/frustrating. Any other ideas?
Thanks in advance,
Steve

Muted colours on profiled monitor

I am having problems with colours in Elements 9, even though my AG Neovo F-419 monitor has been profiled with an Eye-One Match 3 calibration tool. All colours appear muddy/muted in Elements developer, an example being 255 red displaying as ochre. The same files opened in other programs show the colours correctly. RAW files show the same muted colours in Camera RAW and in the developer. It is as if Elements is not using the monitor profile when displaying the files.
On checking my Edit / Color settings I found it was on the recommended 'Always optimise colors for computer screens'. Changing this to 'No color management' causes developer to display the correct colours, whether the picture files have an embedded profile (sRGB) or not. RAW files still show muted colours in Camera RAW, but now display correctly in developer.
My guess is that I have got some setting(s) incorrect, can anyone suggest what needs doing so that I can see the correct colours in Camera RAW and developer.
Technical data that may be relevant.
OS - Windows 7 Home Premium (64 bit ) version 6.1 with Service Pack 1
Monitor - AG Neovo F-419 VDI
Graphics card - ATI Radeon HD 5700 series
Calibration tool - Eye-One Match 3
Elements - version 9.0.1
Camera RAW - version 6.3

Check your video card. Had the same problem on one of my older g5's, Switched to the DVi port and works fine.. if you have one otherwise see if you can "borrow" from a computer store a new card for troble shooting.

Can You Make Text Links Different Colours in DW Cs5?

Hi everyone, in DW Cs5 how do you make text links on the same page different colours, I have some text links across the top of the page, these go with a certain colour scheme but some more on the page it's self these need to be a different colour.
I have done this before by accident but unfortunately I have no longer got that file. Information for text in either html or css would be very helpful.
Many thanks
Gareth

Change this:
<style type="text/css">
.def13grey4 {
     font-size: 14px;
     font-weight: bold;
     color: #333;
.def14grey4 a {
     color: #333;
</style>
to this:
<style type="text/css">
.def14grey4 a:link{font-weight: bold; color: #333;}
.def14grey4 a:visited{color: #999;}
.def14grey4 a:hover,
.def14grey4 a:active,
.def14grey4 a:focus{color:#4488C3;} /**adjust colors to suit**/
</style>
Change this in the HTML:
<td height="354" colspan="3" valign="top" bgcolor="#CCCCCC" class="def13grey4">
<p>Black Shirts #002</p>
</td>
To this:
<td height="354" colspan="3" valign="top" bgcolor="#CCCCCC">
<p><a class="def14grey4 href="some-link.html">Black Shirts #002</a></p>
</td>
HTML & CSS Tutorials - http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Pages document turned to gibberish-strange characters in rectangles. Can't read underlying text (still there)

I use a Pages document (password protected) as a frequent reference. It is 22 pages of text. Suddenly most text was replaced with strange characters, each encased in a little rectangle, so document was unreadable. Selecting a section of text, I could right-click and see that underlying text was still there, just not readable onscreen. Style was "Normal*." I don't know what the " * " means. I selected all and changed style to "Heading 9" on the list. All text reappeared, so my data is ok - for now (though not formatted as I want it). I can't trust Pages, however, and don't know what caused the problem or how to avoid it.
Note that the style now shows "Heading 9*". I don't know why the " * ". I tried selecting all and making "Normal" the global style, but the strange characters wouldn't budge. Switching back to Normal brings back gibberish.
Some text is Verdana; I just noticed that changing font also got rid of gibberish. Changing back to Verdana brought back gibberish.
Note that not every line of text was changed to gibberish; some were just fine.
Other Pages documents are fine - right now. I notice that there are asterisks in Style in other text documents.
I'm an experienced computer user, new to Pages in the fall when it came with my MacBook Air. In this document, format isn't all that important, but I can imagine where this would be a huge disaster for other types of documents.
Any help in figuring out what's going on most appreciated.

Tom -
"That sounds like Apple's Last Resort font, which gets used when for some reason the app forgets about the font being used. Use Fontbook to make sure you don't have duplicate Verdanas on your machine. Also try cleaning your font caches with Onyx or by doing a safe boot"
Wow! Who would have guessed! Thank you for the advice; Fontbook revealed a number of duplicate fonts - ot Verdana, interestingly enough - which I have now resolved. I then switched all text to Trebuchet MS, and everything reverted to normal. I can live with Trebuchet.
This problem appeared on the same day (before or after I wasn't sure) I installed MS Office. Could this have caused the problem?
Thanks for your prompt reply, explanation and solutions.

Some text elements are missing

Hi there!
From some time (I didn't noticed exactly) some text elements disappered in collaboration iviews.
For example if I try to go to some info-site collaboration room and add announcement, new window is opened with no texts, but only input fields to be filled. There's also no text on 'OK' and 'Cancel' buttons. So it's hard to understand what input field is for what purpose :o)
Why could it happen?
We're on SAP EP SP13 on WebAS 6.40, KM and Coll are also SP13.
Thanks in advance,
DK

Hi once again!
I managed to regenerate projects. There's some bug with java on my notebook, but I did it directly on portal server maschine.
But the problem still persist. I even tried to restart servlet engine, no luck ;o(
Regards,
DK

Some text goes missing in the PDF output after I convert FM8 book

Hi,
I am using Framemaker 8.0, Acrobat 8.0 Professional, Acrobat Distiller 8.0.
When I convert my Framemaker books to PDFs, some text (especially Table Heading tags) go missing in the PDF output. I have tried to change the font colour, change the cell shading, and many other options. But, the problem persists.
I saw some similar links on the forums with this kind of problems. For example,
http://support.microsoft.com/?id=952909
http://forums.adobe.com/message/3285145
http://forums.adobe.com/message/4167112
http://helpx.adobe.com/framemaker/kb/troubleshoot-pdf-creation-problems-framemaker.html
After going through these links from the forums, I realized that this is a known issue. But, the above links direct me to Microsoft patches and these patches are available only for Windows XP, Windows 2003 Server, and Windwos Vista operating systems. My operating system is Windows 7 Professional, 32-bit version.
One more thing I want to say is we have never faced this problem earlier. It started appearing now.
While I know that the world (many of us) moved on to Framemaker 9 and 10, I also know that there is someone out there to help me to overcome this issue.
Thanks and regards,
Raghavacharyulu NCB

Hi Harpreet,
Thanks for your response.
We tried this option also. In fact, the Distiller shows this option by default. Secondly, we have recently updated our old template to reflect the new corporate styles and we suspect something went wrong there. We once again took the old template and updated with the new colour definitions and fonts, this time very carefully and it started working. Now, the text is not missing.
So, the result is something is wrong with our template. Quite surprising is it is inconsistent and some places the text appears and some places it does not.
Where do you work? Are you in India?
Cheers,
NCB Raghavacharyulu
Mobile No. : 9845192336
E-mail : [email protected]

Jagged edges on some text in all view modes

Hi there,
I'm very new to InDesign and have trauled this forum for an answer to my question and tried lots of fixes but to no avail.
I have an 8 Page A5 document which I am working on and all was fine until yesterday. Any text I now create on a certain 2 page spread has a slight jagged edge around it, even when zoomed to 100%. When exported in PDF it is smooth again, but it just doesn't look very good when working on the document. All other text still is smooth.
I have anti alias on and high quality display performace switched on. The same happens in preview mode.
The first image of the same text is on the affected page and the second in on an unaffected page at the same zoom, 200%. You can see how much more jagged the first is. I have tried placing the text in it;s own separate layer on top of the other layers as suggested in other threads and I have made my display driver is up to date, which it is.
Any ideas?

I don't know if this is the problem, but I've seen some display anomalies when using the scroll wheel on the mouse (typically sideways scroll, but it happens with vertical sometimes, too). I know Logitech mice are affected, but I don't believe it's resticted to just the Logitech mice. Im most cases switching to the Hand tool (use the keyboard shortcut Alt/Opt + Spacebar to access it temporarily) and clicking will clear things up again, sometimes for the rest of the editing session. When I see this, though, it affect all pages not just one.
Does the type clear if you restart ID and reopen the file?

Lion text problem: Some text does not display properly in Safari and Firefox

Hello
Some text in Safari and Firefox is seriously degraded, making it useless. I changed to Firefox because Safari was displaying wrongly, but Firefox displays the same way, so it seems to be an OS problem. See image as an example:
I cannot see subtitles on BBC streamed movies, and the timing of the movies on the bottom ribbon do not display correctly.
I am using Lion 10.7.5
Is there a solution for this problem?
Thanks for any help.

Unbelievable (and I still cannot believe that) - is wmode="transparent/opaque/etc" - not supported by safari ? then how do you suggest we go about transparent flash elements on web pages? why isn't it working on safari while on every other browser on earth it does?

How to update a text file or change some text easily ??

Hi
I want to change some text inside a text file. I can do it as below:
1) new a File file
2) new a FileInputStream(file) and call read()
3) modify text
4) new a File newfile
5) new FileOutputStream(newfile) and call write()
6) delete file
7) rename newfile to file
It is too complecated. What is easy way to do it ? Thanks for help
Gary

Hi NLSurfMan,
I ceate a coding below , it always give me error:
java.io.FileNotFoundException: c:\abc\file.rtf (The process cannot access the file because it is being used by another process)
I have closed the FileReader and BufferedReader. I still have this problem. Why. Thanks. Gary
int c;
String text="";
File filename=new File("c:/abc/file.rtf");
FileReader fileReader =new FileReader(filename);
BufferedReader bReader=new BufferedReader(fileReader);
while ( (c=bReader.read())!=-1 ) {
text=text+(char)c;
bReader.close();
fileReader.close();
System.out.println("text="+text);
text=text+" I want to make some change here";
File filename1=new File("c:/abc/file.rtf");
BufferedWriter bWriter =new BufferedWriter(new FileWriter(filename1));
bWriter.write(text,0,text.length());
bWriter.close();

Can I use Messages in OSX to text with a person on an Android platform? My iPhone works cross platform but I don't get the text in Messages on my desktop with OSX 10.8.2

Does "Messages" in OSX 10.8.2 work cross platform? My daughter has an android phone and I can text with her OK in iOS. However, her texts don't show up on OSX whereas texts from my son, who has an iPhone, work in iOS and OSX.

HI,
The answer is yes and no.
As Barney-15E link says you can get the Messages app to SMS to AIM Buddies. Or rather telephone Numbers as AIM Buddies.
There are limits.
The computer has to be set as if in the United States (System Preferences > Language and Text > Region)
The phone is question has to be on a carrier that supports AIM SMS forwarding which only applies to some US based carriers.
The reason the SMS Messages arriving on the iPhone do not sync is that they are not iMessages (the "No" Part).
I use Messages with the Buddy List Showing.
As a test I have added a made up number as a Buddy and also created a Address Card for it.
So Mousing over the "Buddy" reveal the "Screen Name" which is the phone Number
You have to include the Leading +1 country code as well.
9:32 PM Thursday; March 14, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How cna I change the text and background colours in iTunes?

Can anyone tell me how I can change the text and background colours in iTunes? I am a visually impared user and my main requirement on a PC is to change the colour schemem to white text on a black background. Most software adopts the settings of your colour scheme but iTunes goes it's own and has everything on white backgrounds. I cannot read from white backgrounds (dazzle - that sort of thing). I have never used iTunes for this reason. I have always been a devotee of by far the best media player out there Musicmatch Jukebox, who allow you to edit skins in every detail. However, recently Musicmatch was taken over and users were forced to migrate to the ridiculously poor Yahoo Music Jukebox. A massive downgrade in so many ways.
I want to use iTunes but will not be able to if I cannot sort this issue out. I downloaded 7.5 before discovering that if you want to use Multi Plugin for skins you need to go back to iTunes 7.02. I've done that, but the skins available are completely pointless to my eyes. They don't change the colours of the main components, just the graphical bit at the top.
What I need to do is change the background of the main browser windows so that they are black and the text is white (you know the track lists and tree views, etc). This must be a very simple case of just changing the codes somewhere, but I can't find where. I read somewhere that you need to hack into something call ResourceDB inside a file called iTunes.jar. There is no such file on my PC. Could that be a Mac thing?
Please help someone if you can. I would like to become an iTunes user. There seems to be more music available than on Napster which I currently use.
Thanks in advance
Z

In my opinion, it seems that Apple has decided to sacrifice usability so that iTunes would look more like a Mac application. You are probably already aware that using Windows' built-in high-contrast settings do not work in iTunes.
I did some hacking at the resource file a while back, but I was unable to figure out how to change the color of the background. IIRC there was a resource whose description indicated it would change the background color, but when I changed the resource, nothing happened.
I was, however, able to figure out how to make the "large" font much larger (any size you want, I suppose). Will that help? See
http://home.comcast.net/~teridon73/ituneshacks/index.html
You should provide feedback to Apple:
http://www.apple.com/feedback/
I don't think it is too harsh to call it "shameful" that Apple has chosen this design path. Where I work, we are required to make ALL applications (or any computer interface, such as a website) section 508 compliant. Of course, I'm being a bit of a hypocrite, because I've made no effort to make my website compliant. If you have trouble reading it, please let me know.

Some text messages not received or are empty

Some text messages not received or are empty, I have been using the Verizon app because I like it but I have also seen issues with Textra. Basically some messages have been empty but last night I sent a text to someone and it sent and delivered and the person never got it. I have wifi enabled at home which was where it happened and I do use a network extender due to the weak coverage but I have a great signal with it and voice was clear last night since I received a call, is anyone else having issues?
I am using Nova Launcher which shouldn't matter. Everything else works great and I love the phone.
Thanks

I, too, have been having many problems with not receiving text messages. I have been dealing with this crap for 6 weeks now!! I don't receive texts from various people, and it is very sporadic. It shows in their sent box, but NEVER shows up in my inbox. I have talked to about 8 different reps from VW and they keep coming up with excuses. We have tried EVERYTHING! They have even sent me a different phone and I am still having this problem. I just got off the phone (again!) with them and they are sending me ANOTHER phone. I have asked to get out of my contract with no ETF, but, of course, they won't allow that to happen. They keep telling me that I "have to work with them"!! Like I haven't given them several chances already! My job is in jeopardy because my boss texted me something; I never received it; and he was NOT happy!! He told me to "get the problem fixed"...I don't feel VW is living up to their end of the contract and I feel like I am paying a lot of money every month for an unreliable service. I am pursuing reporting this to the FCC. Needless to say, I got very angry with the last 2 people I have spoken with at VW and used some colorful language! Does anybody have any suggestions on what I can do next (before I lose my job!!)!!

Cannot send or receive some text messages

I just got the iphone 4s, and am having problems sending and receiving some text messages, it is saying "Message Send Failure"

Same problem persists also here. Have crosschecked with friend, all same settings, have deleted the contacted, created again, still that number does not receive my SMS (no question on iMessage). Can not even reply her message. This problem persists with few numbers, nothing common, different phones, different countries, different operators. All others, with different operators, in different coutries receive my messages. Even other people can send their SMS to her.

Ip4300 on OSX - some text still muted-colour in grayscale

Similar Messages

Maybe you are looking for