IPad 1 email and performance problems ios5

Since I upgraded my iPad 1(wifi only) to iOS 5' I have been having numerous performance problems, and my email continuously sys "checking Email". I have tried restarting my iPod ith no luck. Deleting d reading the accounts woks briefly, but after 15-20 minutes the email problem ones back. The update has relly crippled my iPad.
Has anyone else had this problem? Any ideas to resolve it?
Regards,
Jason

While Downgrading is not actually supported by Apple I found a video on You Type that walked me through it. Just do a search on You tube and you will find it. The one I used was by lizards821. His videos cover any errors you might have.
Once I reverted, I then did a restore from the backup I made when upgrading to IOS 5 and all of my apps were restored while keeping my downgraded IOS.
Good Luck, it was well worth it for me. I have the stable IPAD I love so much back again.

Similar Messages

I have ipad 2 and facing problem with programs swtching off

I have ipad 2 and facing problem with programs it's swtching off while working and turn to home page. Am using ios 5

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HELP! I deleted my ipad email and re entered it and now I can't get any email? What's wrong with this picture?

i was was having problems with email and thought let's start from beginning so I dumped my email account which is att using yahoo and this morning I can't get any of my emails or send email, anyine have any ideaS?
<Email Edited By Host>

What email app are you using: ios mail or yahoo mail app? You could try switching your email app.
My yahoo mail app wouldn't accept my password for my id a few days ago. I have not sorted it out yet. Happened after I download a new version of the yahoo app. Waiting for a new version of the app. Reading my mail on my laptop instead.
Robert

Ipad email and PDF Forms

So I am sending Acro Forms to the iPad. Single page PDF forms open in the body of the email and when I send them to PDF Expert from the email client, they are broken when I try and send them back via the email button in the form. Multi-page PDF's do not open in the email preview body and they work in PDF Expert and email recipients. Conclusion: PDF Preview on iPAD breaks Acro Forms.
Thoughts?

So I am sending Acro Forms to the iPad. Single page PDF forms open in the body of the email and when I send them to PDF Expert from the email client, they are broken when I try and send them back via the email button in the form. Multi-page PDF's do not open in the email preview body and they work in PDF Expert and email recipients. Conclusion: PDF Preview on iPAD breaks Acro Forms.
Thoughts?

Ipad 2 and youtube problem?

Usually when you write something in youtube search box it gives u suggestions n u dont need to write the complete word or sentence..but this dont happen in youtube when i am using it on safari...i have to write the complete sentence...and this problem is not new...but if u use youtube on google chrome's app it works perfectly...but i usually use safari...and there is another problem..youtube buffers slowly on ipad even though my Wi-Fi signal is strong...tried everything reseting network settings, restarting ipad but no difference...any solution? :)

"Usually when you write something in youtube search box it gives u suggestions n u dont need to write the complete word or sentence..but this dont happen in youtube when i am using it on safari...i have to write the complete sentence..."
That doesn't happen when I use youTube thru Safari or the youTube app.. Typing into the search field provides suggestions.
"....and there is another problem..youtube buffers slowly on ipad even though my Wi-Fi signal is strong...tried everything reseting network settings, restarting ipad but no difference...any solution"
WiFi signal strength has nothing to do with Internet access speed. Slow buffering is usually caused by a slow Internet connection speed or Internet congestion or, sometimes, router problems. Measure your Internet speed using the SpeedTest App.

Email and Link Problems on newly uploaded site??

Hey Everyone,
Just finished loading up the first cut of my site at http://web.mac.com/wakestuff and i have a few problems with my email and links page.
In iWeb, the email and links are fine and they're there - in the page online, they're just question marks in a blue square. . . . any ideas why??
Many thanks for any info to clear this up - the site officially launches on monday so i need a little bit of a quick fix and im all out of ideas!

Take a look at your pages names. Example:
http://web.mac.com/wakestuff/iWeb/WakeStuff.co.uk/%20%20Email%20%26%20Links.html
%20 stands for a space.
Your page name has several spaces at the beginning, which is screwing up the links to the images in the corresponding folder. To be honest, I am surprised that page is the only one you are having difficulty with.
Here is a thread where someone had the same problem:
http://discussions.apple.com/thread.jspa?messageID=3893957&#3893957

EMail and SMS problem

hi
I just got a Blackberry Pearl. I configured it to receive my email. Now there is an email icon and all the email goes there. BUT it also started going into the folder that was the repository for SMS text messages. So someone told me to go into general options, select SMS and Email inboxes and choose Separate. I did that but wiht the net result that the SMS folder now shows only my email and the Email folder also shows my email.
The only way to get to my SMS inbox is to select the menu options, select View FOlder, then select SMS Inbox which is a little cumbersome.
How do i fix that so my emails go to my email folder and the SMSes go to my SMS folder?
ALso is there a way to prevent the Blackberry from notifying my every time i get a new email. I am fine with being notified when I get a new SMS?
thanks
Sandip
Solved!
Go to Solution.

To create seperate folders for email and sms, yes you open any of you message folders and hit the menu key, select options then general options, scroll down to sms and email inboxes, change that to seperate. then hit the back key and select save. You should now have a sms icon for text, an icon for each email and an icon for messages that will catch everything. If you do not have these icons try a battery pull. Remove the battery with the phone on and leave it out for 30 seconds. Replace it and allow the phone 1-3 minutes to reboot. Can you now find all the icons?
~Lorrie~ Master of All Things Blackberry!

Email and WiFi problems with IPad1

Yesterday, I sent out an email on my pc laptop to a group and received 5 bounce backs. When I went to my IPad to check my email account, only one bounce back appeared and after about 5 seconds, it kicked me out of email.
Today, it kicks me out after 1 second. In addition, I am no longer connected to my WiFi and the IPad cannot find a network to connect to - it's stuck in 'Choose a Network' mode. Meanwhile, my pc laptop is connected to my network and there are no problems with my WiFi.
I'm not sure where to start...

Try closing the Mail app completely and the see if it works when you re-open it : from the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A second option is to try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HP HDX 16-1010EA: Battery charging and performance problems

Hi,
Due to my warranty being finished by HP, this place will be the only hope for some problems that I'm having, so please help guys.
1. I own a personal copy of Windows 7 Pro x64, installed it on a different partition from my Vista x64 that came with my HDX 16. After i updated the drivers, especially the chipset drivers, running on battery with the balanced profile is like HELL, it's like loading windows 7 on an old 8086 IBM piece, it decreases the performance radically, now it's obvious that the problem is on a driver level but i've updated the chipset for 3 times so far and nothing has changed, i cannot address Intel for this since i have no idea what to tell them, so I'm hoping someone had some similar issues and has a solution for it.
2. Lately, my battery started to charge very very slow and end the cycle of charge pretty fast, now since i cannot act on the balanced profile (explained above why.) i have to use the high performance one, i know this can reduce the life cycle dramatically, but 30-40 minutes are too LESS for even the high performance profile. AND, i am a very careful notebook owner and i treat it as a baby, i charge it fully, then i unplug it immediately, and don't charge it until it reaches 10%. I also give it an airspray treatment every 2 months so you can imagine, this notebook should run as normal as brand new.
3. Now this is not a problem, though pure curiosity. I know the HDX 18 has two hard drive ports and it comes with two hard drives. After Intel upgraded from Matrix Storage app to the Rapid Storage Technology one, i have noticed a little extra interface (logical wise) on the output. Now to clear things out, HDX 16 has an interface for the hard drive, another one for the optical drive and an external interface (eSata), if you look clearly in the picture linked below, you'll see another port, a mysterious port:
http://i46.tinypic.com/x5cw28.jpg
Internal Empty Port, with a SATA Icon on it, is there any chance that the HDX 16 has a spare interface to connect another hard drive??
Regards,
Pluto

Anyone?

Software upgrade, sync and performance problems.

When upgrading to the new iPhone software 4.0. on my iPhone 3G all my pictures captured on my iPhone during the last year has disappeared.
No backup is available in iTunes and the previous upgrades did NOT delete any content in the iPhone. Why did this change and how do I get the pictures back??
The phone is also gradually getting slow - opening a text message takes 5-8 sec this is also not acceptable.
I am a big Apple fan and has been very happy the last 6 years but the iPhone is currently not a product I would recommend to anyone. I also don't recommend SW upgrading since performance keeps going down with the introduction of fancy new features.
Any help/suggestions is appreciated, thanks

Not sure why the photos in the Camera Roll are not included with your iPhone's backup, which has nothing to do with installing the firmware update. This means something was wrong with the backup for your iPhone. I didn't lose any data on my 3G when installing 4.0, but I always import the photos in the Camera Roll especially before installing a firmware update.
Although photos in the Camera Roll are included with the iPhone's backup or should be, so is a significant amount of other data. Photos in the Camera Roll should be imported by your computer as with any other digital camera. Not a good idea to depend on your iPhone's backup and your iPhone alone for this data which can be lost or stolen. I've always imported photos from every digital camera I've used and the same with my iPhone's digital camera, which should be treated the same as any other digital camera for a number of reasons.
Contacts are also included with your iPhone's backup or should be, but contacts are designed to be synced with a supported address book application on your computer and should be available on your computer with or without an iPhone or with or without any cell phone. I've helped countless people here who manually enter all contacts on their cell phone and depend on their cell phone alone for this important data, which can be lost or stolen.
Problems like this certainly did exist a few years back. Hardware can fail, data transfer can fail or get corrupted, and user error or not taking precaution when important data is involved. There are many more people here that don't maintain a backup for any important data on their computer's hard drive than do.
Losing important data is painful, but painful lessons are usually learned the best. Things can and do go wrong. For future reference, import the photos in the Camera Roll ASAP, and especially before installing a major firmware update when the transfer of an existing backup is involved.

KT6 Delta stability and performance problems

Hi all!
My brother and I recently assembled my new computer. Since then I’ve been experiencing two problems that really bug me. I’m no expert at this stuff so if you guys need more info from me to try to help, just say so!
Problem 1:
The optimum setting for my processor is a CPU FSB Clock of 166 Mhz, but I’m only able to reach 160 Mhz. 161-163 will work but is extremely unstable. 164-166 will cause Windows to dump to a blue screen and reboot.
I’ve seen that other people on this board have had similar problems. Note that I’ve set CPU Ratio to Auto and SDRAM Timing to SPD. What could be causing the problem? Could a simple BIOS update help (I’m running the one that was delivered with the motherboard)? How about clearing CMOS?
Problem 2:
Maybe due to the above problem, I’m also having stability problems when I do get into Windows. On some days it’s fine, other days it’s a mess.
All of a sudden, while surfing the net or gaming, the computer will dump to a blue screen with the info that Windows has been shut down to prevent further damage to the system. One of two error messages will be displayed:
“A thread tried to release a resource it did not own” (more common message) or “IRQL_NOT_LESS_OR_EQUAL” (less common).
The computer will then reboot automatically. It’s really hard to specify when this happens: it could come at any time.
The system I have is the following:
KT6 Delta (MS-6590) motherboard
AMD Athlon XP2500+ (1.833 Ghz)
TwinMOS PC3200 DDR-DIMM (2x256Mb)
Seagate Barracuda 80Gb S-ATA
My old IDE 12 Gb harddrive
PowerColor Radeon 9800 Pro 128Mb
TDK CD-RW (40x/10x/40x)
Windows XP Professional with Sp1
Have any of you had similar problems? I appreciate any help I can get!!!
Regards,
Stefan

judd321: couldn't agree more! Thanx to all the people who post here and try to help out computer illiterate people like myself. Interesting to see that you've had the same problem.
Thought I'd give you an update on my situation. I've done some surfing and gotten some mixed messages. Some say that the included PSU that came with my Chenbro Gaming Bomb (FSP Group 350W, delivers 28A at +3,3V, 30A at +5v and 16A at 12V) is plenty to power a system with my specs. Others, like the good people on this board, claim that 350W just won't cut it.
I've just invested in an Aspire 520W (looks creepy and mod-ish). The dealer claimed that it really does deliver 520W at maximum performance and not just at peak. Before I install it I will try the following just to make sure it's the PSU that's causing me problems:
1) Confirm that I still cannot boot up with CPU Clock at 166Mhz. If all is still the same, Windows won't even start. If I, by the grace of the good Lord, do get my system running at 166, I'll monitor unwanted reboots. If system is stable, fine. If no:
2) I'll start by clearing CMOS, with battery and power cord out for at least 10 minutes. Then enter BIOS and run default settings EXCEPT CPU Clock which I'll set to 166Mhz. I'll try to reboot computer to see if this has done the trick. If yes, great. If no, I'll try the same thing but also set memory speed to 333. If that still doesn't work:
3) Clear CMOS with power cord disconnected. Unplug unneccesary components like CD-ROM, fan (not heatsink , floppy drive, any USB devices and my old IDE hard drive. Reboot the computer and set CPU Clock at 166. If the system works, it was definitely the PSU since the absence of the disconnected components will have allocated more power to the connected components. If it doesn't work...does anybody want to buy a pretty decent system that doesn't allow for full processor power and experiences frequent, unwanted reboots?
I'll let you know how things work out!

Massive artifacts, redraw and performance problems: xorg 1.8 and Intel

Hi there.
Since the update to xorg-server 1.8 my intel GMA950 powered lap top is seriously acting up.
*Performance has dropped significantly, Games or compiz run slower than before
*Font drawing is sometimes garbled, sometimes not
*Some windows or parts of windows (sometimes only the decorations) show artifacts
*Drawing of fonts while typing is delayed by 1 or more characters sometimes
It might be related to this bug or the problem described in this thread.
Just look at this screenshot:
I tired moving xorg.conf, I tried running compiz with --indirect-rendering, I tried all kinds of options in xorg.conf and all but it just remains broken like this. Has anyone got similar problems and a solution?
Last edited by Shapeshifter (2010-06-28 15:07:21)

I've been having the same issue but not to the extent of the OP.
I read the man for intel
man intel
and added these three lines to my xorg.conf
Option "XvPreferOverlay" "false"
Option "SwapbuffersWait" "false"
Option "Tiling" "false" #{edit: after doing some testing I found tiling made no differnece so I ended up commenting it out}
The first option I added because the man says
The overlay
behaves incorrectly in the presence of compositing, but some
prefer it due to it syncing to vblank in the absence of com‐
positing
I use compiz ergo i have compositing and I noticed my video tearing and skipping sometimes. Seems to work fine now (more testing will be required)
The second option I added because the man says
Note that when enabled, this option can
adversely affect the framerate of applications that render
frames at less than refresh rate.
I have a hunch compiz probably isn't rendering at the refresh rate and also video would be rendered at less than my vert refresh of 60. So I disabled it.
The third and last option I added was because the man says
In most cases (especially for complex rendering),
tiling dramatically improves performance.
Well this may be a case where it doesn't and the posters above have noticed improvements. {edit: after doing some testing I found this made no differnece so I ended up commenting it out}
In the end moving windows around the screen do not tear anymore and my video is smoother. I enabled all three at once so it maybe that one or a combination of 2 or possibly all 3 resulted in change. I suspect I will do some more testing but hopefully this is a place to start fro some of you having this issue.
Last edited by George.Harmony (2010-07-11 21:21:17)

Linkage and performance problems with "Additional source folders"

Hello
There seems to be a some problems when using "additional source folders" in Flash Builder 4.5 and 4.5.1 (links to folders outside a project see pic below). Hopefully I'm doing something wrong and some kind soul could point it out.
I have a library project which is referenced from a Flex application. When I try to use the tools to go to any of the declarations in the library project from the flex application project, I get a "Code Navigation Error" insetad of seeing the source code in the library project:
Typeing with code completion turned on is super-duper slow, characters take around half a second to appear.
What would really help is to know if there's a way to tell Flash Builder how to locate the source files for library swc's, and if there was a way to improve the performance of the text editor.

Thanks for replying.
I didn't specifically embed the source. How would one do that? I tried the "-debug" additional compiler option (from here http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7ad5.html) but I get an error saying "Option -debug cannot be used when compiling in Flash Builder":
I also did add the common swc into the libraries path using "Add project" in the Flex Application project:
The linked source folders are in the library project, however I still get the same problem wven when not using linkled source folders so I don't think that is the cause:

Startup and performance problems

Hi Community!
First of all, i don't expect to get a good answer to this. I've search for three days for these specific errors, and thought i should share my experiences with other users with similiar problems. I ran Apple Hardware Diagnostics and finally got some sort of clue as to whats wrong with my computer. The exact error code i received was: 4SNS / 1 / 40000000 : IC0C - 51.511. However the only information i've been able to find about that specific error code (IC0C) was: "Current Sensor on CPU 0". And just for the fun of it, iStat Pro reports that the processor uses 51.51A wich to me sounds really high, but i havn't found any relevant info about how many amps this processor is supposed to use.
My Specs:
MacBook Pro (6.2) mid-2010 edition.
15" antiglare highres
8GB Ram
i7-620m 2.66Ghz
7200rpm 512GB harddrive
Mac OS X 10.6.7
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f16
My issues:
I have a couple of really annoying problems with this computer:
First of all the most recent issue, it wont start! Or at least it wont boot unless i press and hold the power button for several seconds until the led indicator blinks rapidly. If i've put it to sleep, when i wake it up it will show the desktop for 1-2 seconds, then it will just die. It wont matter if i have it plugged in with the power cord or running on battery.
My second issue is its poor performance, it's about less than a third as fast as it should be when compared to a friends almost identical computer (the only difference is the screen and the harddrive). And by this i mean pure computing power. http://db.xbench.com/merge.xhtml?doc1=521138&doc2=521137 yeah i know, xbench is a bit long in the tooth but when two nearly identical computers differ that much in the same test something is clearly wrong.
Also as a bonus to the strange behaviours above, my fans sometimes start spinning at 6000rpm and gets stuck there until i shut down the computer or put it to sleep. Neither iStat Pro or SMCFanControl can lower the speed of the fans when they've started running at that speed. And there seems to be no reason for them to run that high as the temperature is below 40C on cpu and around 50C on the gpu. However i've seen a lot of posts about this specific issue, and there was some talk about the power supply sensor being out of whack.
What i've tried:
Reset SMC several times
Reset PRAM several times
Tried to boot from another harddrive
Completely erased harddrive and reinstalled a fresh copy of OS X
Apple Hardware Diagnostics (And finally got something to indicate an error)
Tried reinstalling EFI firmware, but it won't let me (Unsupported Hardware....)
Nothing has worked so far. I will return this computer as soon as it's possible. But i'm too curious as to what that error really means and can that error really be the root cause of my problems? Or rather is the SMC/mainboard faulty?
Sincerly
Fredrik

I think 4SNS might not always be temperature sensors, i think it can be any of the values you can derive from the SMC.
In this case i'm most interested in this specific error code: IC0C (Current Sensor on CPU 0). I'm guessing there's some secrecy going around Apples error codes and therefore there might not be a good answer to this
If i might throw out an uneducated guess, it could be that the voltage/amperage sensor on CPU 0 reports an invalid value and therefore the computer won't start normally to protect itself in case the amperage would be too high.
The reason i ask, is because there might be others out there with this specific error and symptoms that's also curious as to what the cause might be. The correct solution for the problem however is to send it in of course
So i will send the computer a.s.a.p as you suggest Michael.

Image files email and upload problem

Emails I send through mail are arriving very compressed. However when I try to upload them onto my webspace they are expanding.
For example a jpeg 600 x 600px, at a resolution of 72ppi and a file size of 308kb:
When emailed through Mail it arrives as 240 x 240px, at a resolution of 72pp and a file size of 92kb
When emailed through my webmail (Virgin) it arrives at the original dimensions and file size
When uploaded to my webspace using Cyberduck it expands from 308kb to 4GB and an estimated upload time of 18 hours!
The larger the original file size, the worse the email problem, but the upload remains at around 4GB.
I suspect that somehow the file is being compressed on arrival because it has expanded as it is being emailed or uploaded.
My webspace provider says it isn't a problem their end. As things are ok through my Virgin webmail I don't think it can be them - though they are the usual suspects.

When you email an image in Mail, set the Image Size pop-up in the lower right-hand corner of the window to "Actual Size".

IPad 1 email and performance problems ios5

Similar Messages

Maybe you are looking for