IPad 2 in a secure setting
Hello all! We have a very unique situation in our school setting and are looking for input. I teach at a juvenile detention center. Our district is starting the process of a one-to-one iPad initiative. We are hoping to somehow include iPads, but have several unique issues. We will not have 1:1 iPads but will have one or two classroom sets. We are in a VERY secure setting - students are not allowed to speak to each other, they cannot get up without permission, they basically need to have permission to do everything. We have concerns about monitoring their use of the device - how do we make sure they are not going to inappropriate sites or trying to make outside contact etc, sending messages to peers.... We also have questions about how students can turn in their work. We cannot create emails for students - this is a major security issue - so how could we do it? Any suggestions or advice you have would be great! We want to smooth this out BEFORE we put iPads in our students hands.
Based on what you are trying to do, i am not sure you will ever find the pad as a happy answer. The nature of the device is to promote consumption of data, and as designed as a single peron device, assumes you want access to your device.
A lot of schools use the classroom shared approach, so that wil work. I know of no programs that will let you monitor the actual screens as they are used. You can block access to certain sites, or the entire internet through your gateway server, but anything short of a total block means a perpetual game on trying to keep up with that they are finding.
Side issue, and not mentioned, while a desk top computer can be easily shared, they are also kind of heavy and tend to stay on the desk. The pad is extremely portable, and very fragile. Easy to drop or otherwise break.
Good luck.
Similar Messages
-
Just changed my router to airport extreme
My MacBook pro and iPad work fine but my VAIO wireless desk computer is not working.
It says
, the router does not support the network .check security setting.
Which of the security setting will I change?
Thanks for your help.John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts??? -
Somehow I didn't finish my question. It was: Greetings, everyone. I just bought an iPad Air and after setting it up, received the following email, which looks scammish to me.(Partially reproduced below.) Or is it legitimate?
"You’ve taken the added security step and provided a rescue email address. Now all you need to do is verify that it belongs to you."This is genuine if you have submitted Rescue email address (tap to enlarge)
-
Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!
Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
Another problem is using names that windows does not easily handle.
eg If you set the TC using apple names, like
Fred Blog's Airport Time Capsule wireless24ad12
Then to windows this is too long.. it has spaces and it has illegal character.
Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid. -
Just set up my new ipad Air and cannot set up my gmail account into mail ?
Just set up my new ipad Air and cannot set up my gmail account into mail ?
EASY SIMPLE FIX....
The problem is Google.
I had the same problem, couldn't install Gmail on my ipad or iphone and kept saying wrong / incorrect password, error messages. Worked for hours and hours on this.
It is Google's (optional) 2-step verification system that is to blame.
Google won't tell you this, and instead, they have come up with work arounds, and even telling people to install the Gmail iPhone/ipad app, which then limites the iphone/pad functionality when not using iphone's native mail.
FIX:
Logon to Google...
Go into your Google account preferenes
DELETE your cell number used for 2-step verification...... leave it blank
(it is optional, Google does not require you use 2-step verification)
Thats it. Your'e done.
Now set up your Gmail (now called Google) as usual on your Apple device.
You don't need 2-step (optional) verification.
There are other secure ways to do this. It is an option, but Google goes out of it's way not to tell you this.
(and a great way for Google to gleen your personal information, in the name of security)
Hope this helps someone. -
My wife and I share the iPad. Can we set up separate accounts to log in (like on our Mac)?
My wife and I share the iPad. Can we set up separate accounts to log in (like on our Mac)?
Good question, but I'm 99.9% certain the answer is "no". Here are some considerations:
Think of the heritage of iOS. It really started with iPhones and maybe iPods. These devices cost a whole lot less than a Mac. They are generally not thought of as shared (with exceptions, of course, as is true for you).
Think of the backup process. i-devices typically sync with one iTunes on one computer. How would an i-device with multiple users enstantiate this?
Anyway, all this is to say I'm convinced you cannot do what you're inquiring about. -
How to connect my IPad to a security enabled wifi
how to connect my IPad to a security enabled wifi
iPad not connecting to a Secure Wi-Fi signal
Turn OFF your wifi hub so the network is not broadcasting (or go out of range) so the
iPad can no longer see the SSID
Choose another network
Type in the SSID (WiFi Network name)
Select the security type
Enter the password
At this point, you will not be able to join the network (it is not turned on or you walked out of range, remember?)
Turn ON your network hub and wait for the DSL or Internet to get connected, (30 secs to 1 minute in my case) or walk back in range
Then click the Join button on the iPad
Voila, as they say in Texas -
I share an iTunes account with my daughter, I just got an ipad and need to set up with my own I'd for iCloud sync how can I keep my apps and music?
ColleenMcG wrote:
You can continue to share the same iTunes account ID with your daughter and set up a separate iCloud account with a different ID.
=> is this a different iCloud account for each device? I thought iCloud account ID had to match some iTunes account ID, for which we only have one i Tunes account?
You need to set up a separate iCloud account for each person that does not want to share their iCloud data. If you share an iCloud account with someone, any data you both sync with the shared account is merged, and you end up with each other's data on your device(s). If, for example, you owned two devices and someone else in the family also owned two devices, you would both want your own iCloud accounts, and you would each set up your personal iCloud account on the two devices you own. In other words, you want a separate iCloud account for each person to be used on the devices they own. Each iCloud account has to have a separate Apple ID. The ID does not need to be the same as the ID used for iTunes. Many families perfer to share the same iTunes account/ID, but maintain separate iCloud accounts with different IDs to keep there data separated.
ColleenMcG wrote:
It does not need to be the same as the ID used for iCloud.
=> what ID, iTunes? So I can have a separate iCloud account "only" ID which I also assume must be some [valid] email address? The children currently do not have email accounts anywhere.
Yes, I was referring to the iTunes ID not needing to be the same as the ID used for iCloud. In order to set up an Apple ID your children will need to have a valid email address that can be verified by Apple. Apple requires this so they have a way of contacting the owner if there is a problem with the account, such as when you may need to reset the password on the account. When you set up the ID, Apple will send a verification email to this email account and you will need to click on the verificating link in the email to complete the process. If they don't currently have an email account you can just set one up with gmail or another free email hosting service. They don't have to use the account but you will need it to set up the ID. -
We just got 2 iPad air today and Set up both with the same Apple ID, now I'm getting FaceTime and messages for my 12 yr. old. Do I have to set up a separate Apple ID for her to avoid this?
It's a trust issue. You can set them up so you don't receive each other's messages as long as you each have your own email address.
The trust issue is the fact that either of you can change the separation at any time via Settings by checking the appropriate (inappropriate?) email address.
To be absolutely sure you can never receive each other's messages will require two Apple IDs. -
How to Export local security setting all filed name & value against filed.
HI all,
I am trying to export local security setting from local policy using bellow scrip. but it is showing only these are configured. I need expert help which allowed me to export all filed with value where it is configure or not. Please give me.
$output=@()
$temp = "c:\"
$file = "$temp\privs.txt"
[string] $readableNames
$process = [diagnostics.process]::Start("secedit.exe", "/export /cfg $file /areas USER_RIGHTS")
$process.WaitForExit()
$in = get-content $file
foreach ($line in $in) {
if ($line.StartsWith("Se")) {
$privilege = $line.substring(0,$line.IndexOf("=") - 1)
switch ($privilege){
"SeCreateTokenPrivilege " {$privilege = "Create a token object"}
"SeAssignPrimaryTokenPrivilege" {$privilege = "Replace a process-level token"}
"SeLockMemoryPrivilege" {$privilege = "Lock pages in memory"}
"SeIncreaseQuotaPrivilege" {$privilege = "Adjust memory quotas for a process"}
"SeUnsolicitedInputPrivilege" {$privilege = "Load and unload device drivers"}
"SeMachineAccountPrivilege" {$privilege = "Add workstations to domain"}
"SeTcbPrivilege" {$privilege = "Act as part of the operating system"}
"SeSecurityPrivilege" {$privilege = "Manage auditing and the security log"}
"SeTakeOwnershipPrivilege" {$privilege = "Take ownership of files or other objects"}
"SeLoadDriverPrivilege" {$privilege = "Load and unload device drivers"}
"SeSystemProfilePrivilege" {$privilege = "Profile system performance"}
"SeSystemtimePrivilege" {$privilege = "Change the system time"}
"SeProfileSingleProcessPrivilege" {$privilege = "Profile single process"}
"SeCreatePagefilePrivilege" {$privilege = "Create a pagefile"}
"SeCreatePermanentPrivilege" {$privilege = "Create permanent shared objects"}
"SeBackupPrivilege" {$privilege = "Back up files and directories"}
"SeRestorePrivilege" {$privilege = "Restore files and directories"}
"SeShutdownPrivilege" {$privilege = "Shut down the system"}
"SeDebugPrivilege" {$privilege = "Debug programs"}
"SeAuditPrivilege" {$privilege = "Generate security audit"}
"SeSystemEnvironmentPrivilege" {$privilege = "Modify firmware environment values"}
"SeChangeNotifyPrivilege" {$privilege = "Bypass traverse checking"}
"SeRemoteShutdownPrivilege" {$privilege = "Force shutdown from a remote system"}
"SeUndockPrivilege" {$privilege = "Remove computer from docking station"}
"SeSyncAgentPrivilege" {$privilege = "Synchronize directory service data"}
"SeEnableDelegationPrivilege" {$privilege = "Enable computer and user accounts to be trusted for delegation"}
"SeManageVolumePrivilege" {$privilege = "Manage the files on a volume"}
"SeImpersonatePrivilege" {$privilege = "Impersonate a client after authentication"}
"SeCreateGlobalPrivilege" {$privilege = "Create global objects"}
"SeTrustedCredManAccessPrivilege" {$privilege = "Access Credential Manager as a trusted caller"}
"SeRelabelPrivilege" {$privilege = "Modify an object label"}
"SeIncreaseWorkingSetPrivilege" {$privilege = "Increase a process working set"}
"SeTimeZonePrivilege" {$privilege = "Change the time zone"}
"SeCreateSymbolicLinkPrivilege" {$privilege = "Create symbolic links"}
"SeDenyInteractiveLogonRight" {$privilege = "Deny local logon"}
"SeRemoteInteractiveLogonRight" {$privilege = "Allow logon through Terminal Services"}
"SeServiceLogonRight" {$privilege = "Logon as a service"}
"SeIncreaseBasePriorityPrivilege" {$privilege = "Increase scheduling priority"}
"SeBatchLogonRight" {$privilege = "Log on as a batch job"}
"SeInteractiveLogonRight" {$privilege = "Log on locally"}
"SeDenyNetworkLogonRight" {$privilege = "Deny Access to this computer from the network"}
"SeNetworkLogonRight" {$privilege = "Access this Computer from the Network"}
$sids = $line.substring($line.IndexOf("=") + 1,$line.Length - ($line.IndexOf("=") + 1))
$sids = $sids.Trim() -split ","
$readableNames = ""
foreach ($str in $sids){
$str = $str.substring(1)
$sid = new-object System.Security.Principal.SecurityIdentifier($str)
$readableName = $sid.Translate([System.Security.Principal.NTAccount])
$readableNames = $readableNames + $readableName.Value + ", "
$output += New-Object PSObject -Property @{
privilege = $privilege
readableNames = $readableNames.substring(0,($readableNames.Length - 1))
#else = $line."property"
$outputAs an alternate approach wee can preset the hash and just update it. This version also deal with trapping the errors.
function Get-UserRights{
Param(
[string]$tempfile="$env:TEMP\secedit.ini"
$p=Start-Process 'secedit.exe' -ArgumentList "/export /cfg $tempfile /areas USER_RIGHTS" -NoNewWindow -Wait -PassThru
if($p.ExitCode -ne 0){
Write-Error "SECEDIT exited with error:$($p.ExitCode)"
return
$selines=get-content $tempfile|?{$_ -match '^Se'}
Remove-Item $tempfile -EA 0
$dct=$selines | ConvertFrom-StringData
$hash=@{
SeCreateTokenPrivilege =$null
SeAssignPrimaryTokenPrivilege=$null
SeLockMemoryPrivilege=$null
SeIncreaseQuotaPrivilege=$null
SeUnsolicitedInputPrivilege=$null
SeMachineAccountPrivilege=$null
SeTcbPrivilege=$null
SeSecurityPrivilege=$null
SeTakeOwnershipPrivilege=$null
SeLoadDriverPrivilege=$null
SeSystemProfilePrivilege=$null
SeSystemtimePrivilege=$null
SeProfileSingleProcessPrivilege=$null
SeCreatePagefilePrivilege=$null
SeCreatePermanentPrivilege=$null
SeBackupPrivilege=$null
SeRestorePrivilege=$null
SeShutdownPrivilege=$null
SeDebugPrivilege=$null
SeAuditPrivilege=$null
SeSystemEnvironmentPrivilege=$null
SeChangeNotifyPrivilege=$null
SeRemoteShutdownPrivilege=$null
SeUndockPrivilege=$null
SeSyncAgentPrivilege=$null
SeEnableDelegationPrivilege=$null
SeManageVolumePrivilege=$null
SeImpersonatePrivilege=$null
SeCreateGlobalPrivilege=$null
SeTrustedCredManAccessPrivilege=$null
SeRelabelPrivilege=$null
SeIncreaseWorkingSetPrivilege=$null
SeTimeZonePrivilege=$null
SeCreateSymbolicLinkPrivilege=$null
SeDenyInteractiveLogonRight=$null
SeRemoteInteractiveLogonRight=$null
SeServiceLogonRight=$null
SeIncreaseBasePriorityPrivilege=$null
SeBatchLogonRight=$null
SeInteractiveLogonRight=$null
SeDenyNetworkLogonRight=$null
SeNetworkLogonRight=$null
for($i=0;$i -lt $dct.Count;$i++){
$hash[$dct.keys[$i]]=$dct.Values[$i].Split(',')
$privileges=New-Object PsObject -Property $hash
$privileges
Get-UserRights
A full version would be pipelined and remoted or, perhaps use a workflow to access remote machines in parallel.
¯\_(ツ)_/¯ -
Airport Express not recognized by Utility after changing security setting.
We use an Extreme with an Express to extend the network and run speakers. While trying to eradicate Airtunes dropouts I changed the security setting on the Express using the Airport Utility. After the update, the Express is no longer being recognized. Help!!! I've unplugged it and used the reset button to no avail. I'm a techno-dummy, so please be gentle. I really do appreciate any insight.
Hi,
It seems you have set a too strong security on the Extreme that is not supported on the Express.
I don't know what model of Express you have so try to use a less strong security on the Extreme.
(you can find the security specs of your express on Apple's website : http://support.apple.com/specs/#airport )
As you have reset the Express... you will first have to set it up again...
P.S. : Do the connection drop problems occur on the Express and / or on the extreme ?
As security settings "should" not be the cause for WiFi connection drop, something else is.
Can you give more info on what you already tried ? Ex : Multicast Rate, Transmit Power, Use wide channels, Closed network, Use interference robustness
Kind regards, -
I lost my iPad! I initially set up a screen lock in iCloud, only to find out that I would then not be able to find my device. I then removed my device from the list in iCloud. Now, after clicking on "find my iPhone", it does not appear in the list. How do I get it back in my list of devices? The fact that it was originally in the list, does it mean that I did activate "find my iPhone"?
you did activate find my iPhone but because you removed it from the devices list, you cant do anything further. You need the device to add it back to the list.
-Brenden -
Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
I can surf the web. My wife can print from her PC wirelessly on it.
I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
it still shows "off line"
with the printer power on. Any suggestions?All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)? -
SendAndLoad fails in mac .app version - possible security setting problem?
Hi all,
I'm having trouble with sendAndLoad working on the .app version of a flash application I made. So far it's only happening on one computer, so it appears to be some sort of security setting. Here's what's going on:
I've built a flash application (Flash 9, AS2) that has three versions: an online version, a standalone .exe version for PC, and a standalone .app version for mac. The user must log in to use the application. Online, this is handled by the portal hosting the flash. In the standalone versions, the user must login through the flash application. Through sendAndLoad, it accesses the same database of user info as the online version. The user just enters username/password, clicks "Submit," and if it finds the combination in the database, it lets the user in. If not, it gives them a message saying they entered the wrong username/password.
This has tested fine across macs and pcs, but sadly one macbook can't use the .app version. It launches, they put in valid username/password, hit submit and it freezes. All I can tell is that it gets the httpStatus number 0. As you can see below, I've got it set up to spit out an error message if it fails to load (login_lv.onLoad = function(success)), but it doesn't even do that.
I've put a crossdomain.xml file at the root level of the domain that's set to allow access from any domain.
This computer can log in successfully to the online version of the course, but the .app version seems to be hampered by some sort of security setting. The problem computer's settings match the settings of a mac I've tested successfully. It has up-to-date Flash 10 and is running Leopard. Here are security settings:
System Preferences>Security
General
Everything is unchecked
FileVault
Turned off
Firewall
"Allow all incoming connections" is selected
I'd appreciate any ideas anyone has. I'm far from wise about the ins-and-outs of mac security, so I may be missing something. I'm happy to clarify anything.
Code is below. It loads login_lv first, then bookmark_lv. It never gets far enough to load bookmark_lv. The severAppUrl is set to a placeholder for confidentiality's sake. The path is defintely right. It works on other computers.
Thanks!
Mike
// create a LoadVars instance
var login_lv:LoadVars = new LoadVars();
// add the login variables to pass to the server
login_lv.userid = "";
login_lv.pwd = "";
login_lv.modname = "a";
// setup login urls
var serverAppUrl = "http://myurlhere"; //this is just a placeholder. good ol' confidentiality agreements...
var loginUrl = serverAppUrl+"login.asp";
// setup bookmark urls
var bookmarkUrl = serverAppUrl+"menu.asp";
var bookmark_lv:LoadVars = new LoadVars();
// add the bookmark variables to pass to the server
bookmark_lv.studentid = "";
bookmark_lv.isAdmin = "";
bookmark_lv.modname = "A";
_global.modnameTemp = bookmark_lv.modname;
// setup login function
function doLogin() {
login_lv.userid = login_mc.user_txt.value;
login_lv.pwd = login_mc.pwd_txt.value;
login_lv.sendAndLoad(loginUrl,login_lv,"GET");
// send the login info
login_mc.continueBtn_mc.onRelease = function() {
this.enabled = false;
doLogin();
// variables will appear in the login_lv object
login_lv.onLoad = function(success) {
if (success) {
if (this.studentid == undefined) {
login_mc._x = 0;
trace("not logged in");
debug_mc.body_txt.text+="\nnot logged in";
if(this.reas == "Please Complete Overview and first 3 Module(s) with at least 70 score."){
login_mc.loginBad_mc.gotoAndStop("r2");
login_mc.loginBad_mc._visible = true;
} else if(this.reas == "Please Complete Overview Module first."){
login_mc.loginBad_mc.gotoAndStop("r3");
login_mc.loginBad_mc._visible = true;
} else {
login_mc.loginBad_mc._visible = true;
} else {
login_mc._x = 800;
trace("now logged in");
debug_mc.body_txt.text+="\nnow logged in";
trace("studentid: "+this.studentid);
trace("isAdmin: "+this.isAdmin);
//track variables for later use
_global.studentidTemp = this.studentid;
_global.isAdminTemp = this.isAdmin;
bookmark_lv.studentid = ""+this.studentid+"";
bookmark_lv.isAdmin = ""+this.isAdmin+"";
bookmark_lv.sendAndLoad(bookmarkUrl,bookmark_lv,"GET");
}else{
debug_mc.body_txt+="\nlogin load error"
login_lv.onHTTPStatus = function(httpStatus:Number) {
this.httpStatus = httpStatus;
if(httpStatus < 100) {
this.httpStatusType = "flashError";
else if(httpStatus < 200) {
this.httpStatusType = "informational";
else if(httpStatus < 300) {
this.httpStatusType = "successful";
else if(httpStatus < 400) {
this.httpStatusType = "redirection";
else if(httpStatus < 500) {
this.httpStatusType = "clientError";
else if(httpStatus < 600) {
this.httpStatusType = "serverError";
debug_mc.body_txt.text+="\n login_lv HTTPStatus number="+httpStatus+" HTTPStatus type="+this.httpStatusType;
//prepare bookmarkXML to receive returned info from bookmark_lv function
var bookmarkXML = new XML();
bookmarkXML.ignoreWhite = true;
bookmarkXML.onLoad = bookmark_lv;
// variables will appear in the bookmark_lv object
bookmark_lv.onLoad = function(success) {
if (success) {
trace("bookmarked");
debug_mc.body_txt.text+="\nbookmarked";
trace("bookmarkXML: "+bookmarkXML);
var bookmarkNode = mx.xpath.XPathAPI.selectNodeList(this.firstChild, "/bookmark");
trace("bookmarkNode: "+bookmarkNode);
var bookmarker:String = unescape(eval("bookmark_lv"));
trace("bookmarker: "+bookmarker);
bookmarker = bookmarker.split("<xml>").join("");
bookmarker = bookmarker.split("<bookmark").join("");
bookmarker = bookmarker.split("/bookmark>").join("");
bookmarker = bookmarker.split("</xml>").join("");
var startIndex:Number;
var endIndex:Number;
startIndex = bookmarker.indexOf(">");
trace(startIndex);
endIndex = bookmarker.indexOf("<");
trace(endIndex);
var bookFinally:String;
bookFinally = bookmarker.substr(startIndex+1, endIndex-2);
bookFinally = bookFinally.split("<").join("");
setBookmarkStr = ""+bookFinally+"";
trace("string: "+setBookmarkStr);
_global.newBookmark = bookFinally;
play();
}else{
debug_mc.body_txt+="\nbookmark load error"
bookmark_lv.onHTTPStatus = function(httpStatus:Number) {
this.httpStatus = httpStatus;
if(httpStatus < 100) {
this.httpStatusType = "flashError";
else if(httpStatus < 200) {
this.httpStatusType = "informational";
else if(httpStatus < 300) {
this.httpStatusType = "successful";
else if(httpStatus < 400) {
this.httpStatusType = "redirection";
else if(httpStatus < 500) {
this.httpStatusType = "clientError";
else if(httpStatus < 600) {
this.httpStatusType = "serverError";
debug_mc.body_txt.text+="\n bookmark_lv HTTPStatus number="+httpStatus+" HTTPStatus type="+this.httpStatusType;try using different loadvars instances for your send loadvars and for your receive loadvars.
-
Security Setting in Microsoft Excel Prohbit XL Report From Running
Dear Expert,
When I run XL Report following error message display
Security Setting in Microsoft Excel Prohbit XL Report From Running
On server Excel 2003 is installed and its working ,
But client PC Excel 2007 is installed and when run xl addon above error display...
all the micro setting and trust center setting is done.
Pls help me.......
Thanks
Ashish NandgaonkarDear Ashish Nandgaonkar,
You may check this thread first:
XL reporter issue in SAP Business one 2007 B patch 15
Thanks,
Gordon
Maybe you are looking for
-
Error while attaching settlement rule for AuC asset
Getting error "The share to be settled in rule 001 is not unique" "Enter a unique number (001) (view: Actual settlement) " when trying to attach a settlement receiver in transaction AIAB - where to view the duplication of rules, and where to delet
-
Change Duration of Multiple Still Images - No Ripple
New to FCP X -- still trying to figure things out. I have a bunch of still images that were put into timeline -- all 10 seconds. I was changing the duration of groups of them within the timeline and everything was going great...timeline would rippl
-
SpamAssassin and too much CPU load
I have been testing my messaging server and SpamAssassin integration. Everything seems fine except too much CPU load coming from spamd (SpamAssassin's daemon). I am testing them on a UltraSparcII-i, 256MB, Solaris 10 box. When I loaded it with 4msg/m
-
Can u tell me what to do for re install the speedbit video downloader. Without this i unable download any videos. plz Help...........
-
Let's say that this is my tables and relations: ---------| |--------| |TABLE_1 |\ \ |TABLE_2 | | |------|----------| | | |/ | | | | | | |________| | |