IPad 3- cracked screen repaired and not working???
So we cracked our iPad three, (the new, now discontinued one) and the screen was completely shattered. We got it repaired at a repair shop that looked reputable but now it doesn't seem so. The screen is completely scratch free and perfect, but the LCD (I think) doesn't really work as well anymore. You can try to touch somewhere on the screen and it will make it something else. Scrolling is a bit stuffed up as well. Nothing else is distorted, the colors are fine and they're aren't any noticeable imperfections in the screen. It's really annoying touching the bottom of the screen and having something in the middle of the screen pop open. We probably voided the warranty going to this repair place, but is there anything else we can do to fix the iPad?
ipodandapplehead100 wrote:
We probably voided the warranty going to this repair place
Yes, you did. That is why I do not advise going to a third party shop - too risky to try to find a reputable one. Apple may let you still exchange it at the out of warranty pricing.
Similar Messages
-
I got my cracked screen fixed , and ever since my phone has been acting up. Now Im trying to restore it and it wont restore. Also my phone wont work without being on the charger. It just wont disconnect from ITunes Can I get help ASAP
nadiamilan wrote:
I think that is an great idea . But I wanna know if there is anything else i can do besides going all way back to the place i got if fixed at ....
Probably not. -
I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....
Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G. -
I used assistive touch to turn off my iphone, because my lock screen button is not working, so now i cant turn it back on! What i did was, i went to assistive touch, then i held down the lock screen button to turn it off. Now i can't turn it back on.
To turn it back on when you use assistive touch, all you have to do is plug your iphone into a charger and it will power back on
-
ssince I updated my iPhone 5s to ios8 ive had nothing but problems...
first the the screen rotation is not working... Checked the settings and lock is off.... The wifi is intermittent, some times it works sometimes it doesn't....
the he iPhone is really slow now, like really labouring.... It hangs and crashes all the time.... I have to close apps down completely because they won't work from quick launch anymore.... Even writing this the phone is labouring.... It's like my old 48k spectrum.... I don't expect this from Apple and when you spend £400-500 on a phone you expect it to work and play propperly.... come on Apple you need to sort out this mess of a update.... Ios 7 was no bother......Same issue here... iphone5S 64GB. It's intermittent. Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
Rotation lock is disabled (tried toggling it on and off). Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
This issue only started happening after upgrading to iOS8. I did a reset/restore through iTunes rather than an OTA upgrade.
UPDATE - power-cycling the phone seems to fix it temporarily. -
My ipad 2 died. It is not charging and not working. Help?
My ipad 2 has suddenly died. It is not charging and not working. It is under the one year warranty. Does anybody have experienced such problem?
If you are stuck with the Apple logo then the last section on this page http://support.apple.com/kb/TS3281 suggests putting the iPad into recovery mode http://support.apple.com/kb/HT4097 (which so far I havn't need to do with mine)
-
Apps downloaded are appearing as "loading" on ipad 2 and not working
I have downloaded couple of application through iTunes and loaded them to ipad2 64gd wifi 4g. They are appearing as "loading" on ipad 2 and not working. Tried to restore ipad to presious version os and reboot etc. but nothing worked. Can someone help please.
Check iTunes and see if you have a pending or stalled download in there. If you do, finish that download or delete it if you can. If you can't finish or delete the download on the iPad, do it in iTunes on your computer and then sync the iPad. Then go back to the apps and see if they will download.
If that doesn't work or if that was not the problem, go to Settings>Store >Apple ID, tap your ID and sign out. Then reboot the iPad, Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Then go back to Settings>Store>Sign in and sign in again and see if the apps will update. -
my iphone 5 touch screen function is not working. I cannot do anything right now even reset it because i cannot disable the Find my Iphone feature which is needed in resetting your iphone thru itunes. Please help. My phone is already out of warranty and i cannot just rely on techinicians here in our place since it is possible they might switch the original parts to something else...please help me thanks
Log in to https://icloud.com/find using your Apple ID. Erase and then disconnect your phone from your account. You can then restore it using iTunes.
-
I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should. I left and came back in about 4 hours and have a black screen. When I press the on off button nothing happens. Help.
Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My passcode is working to unlock the screen but does not work with restriction passcode.
Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
Should restriction passcode be different from what i set?There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
Do you have a backup which might not have this restriction passcode? If so restore to that backup? -
How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated. -
Screen Mirroring does not work, full of bugs.
Hi,
I've had a Sony Z1 for well over six months now and have got a Sony Bravia TV that supports mircast screen mirroring. When I purchased the Z1 it was on android 4.2 and the screen mirroring worked a treat, it was lag free, always responsive etc.
But when I upgraded to 4.3, the mirroring was buggy as **bleep**, the device always disconnected, when it did connect after several attempts it would lag, black out, then disconnect again. I've tried fiddling with wifi settings as well as wifi direct etc. but no joy and I left it as that.
When I knew 4.4 kitkat was coming to the z1 I waited as I would assume the issue would be fixed, but I upgraded to 4.4 (build: 14.3.A.0.757) today and is still full of these disconnecting and unresponsive bugs. I'm not sure what the problem is, I mirrored a samsung s4 mini and works absolutely fine (4.2) and I can mirror my sony xperia tablet z (4.3) with no issues either. I know a relative who also owns the z1 and has exactly the same issue, what also seems to happen now and then, is that half way through a mirrored session, the wifi would disable and will switch to the mobile network, then after some time, back to wifi again; yet this never happened on 4.2?
Is there a fix or a way to solve these issues? It's rather annoying having such a great feature that doesn't want to work on a flagship.
Thanks.I had some issues with Miracast on my Z1 but with 4.2 and 4.3 firmware. It was loosing connection or kept saying that I don't have HDCP. I was connecting using Netgear Push2TV.
On 4.4 (.757) it works quite stable. On Z1C with 4.3 I wasn't able to miracast at all.
The same goes with screen mirroring to Z2 tablet. Works fine from Z1 to Z2 (both KitKat, altough one touch pairing is a disaster and not working at all), but you can forget about it using Z1C and Android 4.3.
Best regards,
Sergio PL
Xperia Z1 / Nexus 7 (2012) -
I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support
“the EU is considered one country for warranty purposes“
Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
Some how you need to get your phone back to Switzerland. -
made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
class Program
#region Cosmos Builder logic
// Most users wont touch this. This will call the Cosmos Build tool
[STAThread]
static void Main(string[] args)
BuildUI.Run();
#endregion
// Main entry point of the kernel
public static void Init()
var xBoot = new Cosmos.Sys.Boot();
xBoot.Execute();
Console.ForegroundColor = ConsoleColor.DarkBlue;
a:
Console.WriteLine("------------------------------");
Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
Console.WriteLine("------------------------------");
Console.WriteLine();
Console.WriteLine();
Console.WriteLine();
Console.WriteLine("\t _____
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |___________");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t|_____| |____________| |____________| ____________");
string input;
Console.WriteLine();
Console.Write("\nAbout OS : a");
Console.Write("\nTo Shutdown : s");
Console.Write("\nTo Reboot : r");
Console.Write("\nStart Windows Normaly : n");
Console.WriteLine();
input = Console.ReadLine();
if (input == "s" || input == "S"){
Cosmos.Sys.Deboot.ShutDown();
else
if (input == "r" || input == "R"){
Cosmos.Sys.Deboot.Reboot();
else
if (input == "a" || input == "A"){
Console.ForegroundColor = ConsoleColor.DarkBlue;
Console.Clear();
Console.WriteLine("\n\n\n-------------------------------------");
Console.WriteLine("version: DISPLAYS OS VERSION");
Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
Console.WriteLine("-----------------------------------");
Console.Write("You Want to know : ");
input = Console.ReadLine();
if (input == "version"){
Console.WriteLine("--------------------");
Console.WriteLine("OS VERSION 0.1");
Console.WriteLine("--------------------");
else
if (input == "about"){
Console.WriteLine("--------------------------------------------");
Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
Console.WriteLine("--------------------------------------------");
Console.Write("Want to go back to the main window");
Console.Write("\nYes : ");
string ans = Console.ReadLine();
if (ans == "y" || ans == "Y")
goto a;
Thread.Sleep(10000);
else
if (input == "n" || input == "N")
Thread.Sleep(5000);
Console.Clear();
for (int i = 0; i <= 0; i++){
Console.Write("\n\n\n\n\t\t\t\t\t ____ ____ ___
Console.Write("\n\t\t|\t\t | | | |
| | | | | |");
Console.Write("\n\t\t|\t| | |---- | |
| | | | | |---");
Console.Write("\n\t\t|____|____| |____ |___ |____ |___| | | |___");
Thread.Sleep(500);
Thread.Sleep(5000);
Console.Clear();
BootUserInterface();
Console.ReadLine();
// Form1 fo = new Form1();
else{
for (int i = 0; i <= 5; i++){
Console.Beep();
Thread.Sleep(1000);
goto a;
while (true);
private static void BootUserInterface() {
Thread t = new Thread(UserInterfaceThread);
t.IsBackground = true;
t.SetApartmentState(ApartmentState.STA);
t.Start();
private static void UserInterfaceThread(object arg) {
Form1 frm = new Form1(); // use your own
Application.Run(frm);
Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Netflix streaming from iPad to hgtv via VGA cable not working. Message says to turn off mirroring in airplay, but I don't know what that is or how to turn it off. Any help?
Try resetting the iPad (hold the home and power buttons down until the Apple logo appears).
Barry
Maybe you are looking for
-
Why i can't get latest firmware update for n97?
I can see there is new update for n97 (21.2.045) but update check from phone and pc says i have the latest version. i don;t have latest version. i have september firmware on.
-
Reg : Excise Invoice for Sales from Depot using J1IJ.
Hi Gurus, I am trying to create Excise Invoice thro J1IJ for Delivery Sales from Depot.While doing so it throwing an error "Foreign Lock on Delivery 82XXXXXX for Delivery".Please advice what to do for this. Thanks in Advance, Nambi.N
-
Why doesn't the Card show up from the CardLayout:used JPanel,JFrame
hello guys, this is a question regarding. As I did not get nice responses i am posting again today. http://forum.java.sun.com/thread.jsp?forum=57&thread=235761 Hi, I would like to re-arrange my question and put it in a simpler way. I have a frame(mai
-
Does anyone knows how can I get a thorough guide (not the "short-cut" one) to OS X Lion?
Does anyone knows how can I get a thorough guide (not the "short-cut" one) to OS X Lion?
-
Login prompt while sending graphic in html email (CRMD_EMAIL)
Scenario : We have created a new standard response in webclient email. The template for this is maintained via CRMD_EMAIL(or CRM_ERMS_MAILFORMS - both refer to the same program). We have created a text within the window with text type html. A web gra