IPad 3 export settings

Hi
I hope someone can help I just ordered the iPad 3 and want to export some video's to play on it. I am wondering what will be the best export settings to use to utilize the retina display ?
Many thanks in advance

H.264 would be my guess. It is pretty much a universal standard today.
Mpeg2 should play fine, but being an Apple product, you'd likely have to purchase or download a decoder for it.
Try apple support
oh heck... what's this new google thing the kids are using:
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
and
http://www.ifunia.com/ipad-column/ipad-supported-video-and-audio-formats.html
http://www.ipadintouch.com/popular-ipad-2-video-format-explained/

Similar Messages

FCP X DV Export Settings

I need help with some export settings for DV in FCP X
I've downloaded the 30 trial. I'm working with a DV clip that's about 10 minutes long. I'd like to export the finished moved to a file format so I can brun it to a DVD and send to relatives, etc.
I've tried exporting to quicktime using current settings, changing it to progressive, even exporting to h.264. In each case, I get different and undesirable results. Sometimes the footage is interlaced to the point where it is very obvious (sometimes it's so bad it's unwatchable). Sometimes the footage is "shimmery" or jumpy. My comparison point is the same film I exported to QT years ago using FCE 4. None of these exports look close to that level of picture quality.
I was hoping to use FCP X because of it's similiarity to iMovie '11 and because of the single field processing problem affectinf the quality of DV footage with iMovie '08-'11 exports. But I can't seem to get the export settings right. I'm sure it's just a minor issue.
I really need some guidance on the right DV Export settings, as I have almost 100 hours of familiy footage in DV and was hoping to see improved picture quality if I used FCP X.
I'm using a mid 2009 MacBook Pro 13 inch, 2.53ghz processor with 8GB of RAM and a 500GB 7200rpm HD.
Thanks,
Bryan

Well, here's an interesting phenomenon. Until now, I have just been working on VHS-DV transfers for DVD end point. I haven't thrown any HD stuff at a DVD yet (except for an experiment on the pretty useless FCPX DVD export.)
All of those VHS projects have required chapters, so I just export media -> DV as we have discussed here. There was one 15 min segment I pulled out and made as a separate DVD for a friend. All of these have been SD and life is good.
Just finished a 720p project. Shared one copy out for my iPad, then went thru the proper project settings for DV Anamorphc and did the Export Media -> DV. Checked it in QTP and saw it was 853x480 as expected. Ran it straight to iDVD since I didn't need Chapt Markers. Made 5 copies and last night proudly played it for the recipients. The sucker was squished to 4:3 (yes, iDVD project was set for 16:9). That'll teach me to not play the DVD first.
Couldn't change it in QTP cuz it was already 853x480. Had to run it thru FCE first to get the 720x480 out, and then thryu QTP to change it back to 853x480.
Just thot I'd come over here and mention it.
As an additional observation, it was interesting to see that the iDVD result was no different for theVHS-DV project SD (640x480 out) whether I ran it thru FCE (720x480 out) or not.

Import/Export Settings for Canon T4i Video

Hey folks,
I'm new to Premiere and loving it, but I'm wondering what the best sequence settings, as well as export settings, will be for video captured from my Canon Rebel T4i camera.
I prefer to shoot either in 1080p with 24 fps, or 720p at 60 fps––what settings within premiere should I use when setting up my project, and what are some good export options for Youtube/Vimeo?
thanks!

FAQ: How do I choose the right sequence settings?
FAQ: How do I export a movie for YouTube, Vimeo, iPad, iPhone, or Apple TV?

How do you get to the options for export settings with the new quicktime?

I'm having trouble with the new quicktime pro. I'm trying to export a video with specific settings when exporting. It seems that in this version of quicktime you export and the only options i get is how to format : for ipad/pod/phone or 480p which is not what I want I need to change the settings to make my video 480x360 and fast start for web. can someone help

How do you get to the options for export settings with the new quicktime?
You don't Use QT 7 "Pro", GarageBand, a video editor app, or a third-party app like MPEG Streamclip all of which can access user conversion settings.

Premiere Pro CS4 "Export Settings" window does not show up.

Hello,
I've run into a new problem with Premiere Pro CS4. Basically, when I select "File > Export > Media" my Export Settings window doesn't show up. If I click on the Premiere window I hear the beeping sound and nothing happens, if I hit Enter the Export Data window pops up and then Media Encoder opens. So, it seems that my Export Settings window is still open but I can't see it and make the necessary setting changes. It does not appear to be minimized and I can not locate it on my desktop anywhere. This is really frustrating because I was able to see the Export Settings window just a few weeks ago when I was exporting my last project. I've tried changing my screen resolutions but that didnt reveal the Export Settings window.
Does anyone know what is going on here and, more importantly, how I can fix it? I am really stuck here and am working against a deadline. Any and all help is greatly appreciated!
-Ben

Ben,
THANK YOU!!!! For two days I have been struggling with the exact same issue. And of course it was simple to fix, if I had just thought about it. Thank you for taking the time to post your experience. I had tried all sorts of stuff trying to get everything onto my #1 monitor, with desktop & workspace resets, resizing my display, etc. After reading and printing your post,
Hitting ALT+Space,
Down Arrow,
Enter,
and then pressing the left arrow and watching my Export window slide into view, I was laughing so hard, that I was tearing up. It would have been a month waiting for my second monitor to get repaired to get to see what was still being displayed on this ghost monitor. Each week, I video and edit our church's service and then post three versions (Windows Media Player, Ipod-MP4, MP3 Audio) of it to our web site. I would have been four weeks behind were it not for your post.
Again, a BIG Thank You!!!
Tony Salso
[email protected]
Cedar City, UT 84720
Tony—Professional Digital Pictures
--Videographer and Webmaster
Red Hills Southern Baptist Church
Serving Jesus in Southern Utah
[email protected]
www.redhillssbc.org

HT1414 I have had to restore my ipad to factory settings and then tried to restore the data from the backup on itunes, but none of my apps have restored - please can anyone help as my daughter is going to go mad if I can't get her games back to where they

I have had to restore my ipad to factory settings, having made a backup on my pc first. When Ihave tried to restore from my pc I have no apps!! Please can anyone help me get them back with all their data. I don't have wifi at home and I have never been able to sync my pc with my ipad, although it works with my iphone! I copied all of the apps before I restored using itunes, but no idea where they are copied to. Any help would be hugely appreciated to get my daughters games back. Thank you in advance )

Hi Skydiver119
Thank you so much for taking the time to reply to my problem.
Yes the purchases were made though my apple id.
I have looked at a few other questions on this topic and I have read that the app data is stored in the backup file but the apps themselves need to be synced back onto the ipad. Someome has mentioned right clicking on sync my ipad but I don't know where to find that to right click on!! Lol.
Again, I really appreciate your time and if by any chance you know where I can 'right click' I would really appreciate you letting me know as I can't get my ipad to sync with my pc at all, although it is being picked up in itunes and it has backed up to itunes okay. GGrrr. Maybe I have something wrong in the settings which is not making them compatible?

Is there a way to use my iPhone and iPad mobile email settings in a macbook air to utilize it as a true mobile device?

My company doesn't support macs, but the mobile mail works great on my iPhone/iPad. The settings provided by my company enables syncing on my calendar, I can accept appointments, and my mail syncs perfectly and always faster than my DELL laptop wired to my network.
My question is this... I desperately want a macbook air as I travel ALL the time. Can I use my mobile settings to send/receive/coordinate my calendar just as my iphone does on the macbook air? I have a macbook pro and have been experimenting with the mail.app, and it can't connect to the mobile server to my company.
If the settings work so well on iphone/ipad, why can't I get them to work with the mail app on OSX?
First off, I'm set up as exchange on my iphone.
I enter my company email address, add my company user name, add my password, enter domain, and type in mobile.xxxxxxxx.com as my server... WORKS perfectly.
On the mail.app on my mac, there's no place to add domain, so I've tried to not add it, and also tried to put my domain behind my company username. DOMAIN\USERNAME.
Mail can not connect to the server.
Is a port issue?
I also tried to sync the account using itunes. I currently have a gmail account, mobileme account, a yahoo account, and my company exchange account. ONLY the mobileme and gmail account show up in the sync.
How do I solve this? How can I make it work? Is there a mail client out there which makes OSX look like a mobile device for email/calendar applications???
I tried apple support, and I guess they can't wrap their heads around the fact that some companies still do not support mac. Support was useless.
HELP!!

Is there a way that I could use my (first generation) iPhone as a back-up modem for both notebooks?
No.
(36480)

How do I reduce the number of audio channels in the source or export settings?

I'. trying to export my finished edit through the "movie" setting but keep getting the message that the number of audio channels to create in the exported file must be equal to, or less than the number of channels in the source. Reduce the number of audio channels in the source. Reduce the number of audio channels in the export settings. I am at a loss as to what this means and how I proceed with it prior to putting it to DVD. Please advise.
JWooley

What is your source, sequence settings and export setting. Which version of PP?
Prefebly a screendump of the export settings box.
(e.g. trying to export a mono track to 5.1)

Export settings for RealMedia

Hello everybody
I use PR Pro 1.5 and I created a short video (a collection of .avi source files that lasts no longer than 4 mn) that I need to export in various formats :
WMP and RealMedia for the web, and then AVI, QT and MPEG1 for cdroms, Knowing that the video is meant to be seen by a large audience, and that the original avi files properties are as follows : 720*576, audio rate=1024 kbps, 16 bits, PCM and video image rate 25/s, 29200kbps.
I am really new to all the concepts regarding audio and video codecs, time frame, bit rate etc. so I am a bit at a loss with the export settings.
So far, for each of these formats, my guess would be as shown below :
RealMedia for the web : export / adobe media encoder
codec : "RM9 NTSC download "32"," 62", "128" or "256 "? I don’t know which to choose or why. And just because 256 seems familiar, this is what I would select.
a- for the “Band width” I’d pick up the “56 dial-up” settings because of the large audience it is aiming at, ..
b- as for the “band width rate” I can choose between “variable” (average or high quality) or “continuous”, I’d pick “variable (average) because of the diversity of the audience connectivity
c- and then I have to choose the rate values (default values go from 700 max to 200 average), and here I really have no idea,
d- Then I have two drop down menus (for video and audio), first for a voice codec : there aren’t any voice on my video, so I’d pick the lowest value = 5kbps, second for a music codec : there’s a mp3 soundtrack on my video (rate: 200kbps, 2(stereo) and 44KHz), so I’d go for the “176kbps stereo music” selection in the drop down list, but I keep wondering why not “176 kbps audio surrounding”, or maybe it could be a lower or a higher rate.
e- and then again, I have the same two drop down menus (but this time for video only). Basically for the voice codec I’d make the same selection as above for both the voice and music codec.
a-In the video panel, I can decide to change the dimensions of the images. Default is set to 320*340, but my original files are 720*576. So should I change the default settings to match the real dimension of the images ? If I do so, will that increase the weight of my video and as a consequence the duration of download for the internet users ? Maybe I shouldn’t consider this as it should be a streaming video, … then the weight doesn’t really matter, and I can go for the 720*576 resolution. Except I’ve read somewhere that most servers that host videos are not dedicated to streaming, so in the end, the weight does matter for most internet users wishing to watch a video. … Shouldn’t I on the contrary leave the default dimensions as they are ?
b- and the in the next drop down menu I have to choose the video compression : “Real Video 9” or “Real Video 8” or “Real Video G2”. So … So G2 rings a bell somehow related to servers specializing in streaming (maybe I am completely wrong here … sorry). So I’d pick up that one to ensure that my video will be streamed. Then as an afterthought, as the total length of my video lasts no longer than 4 mn, maybe I can afford any of the two other options in the drop down menu. But which one is best ?
Jeez, this is a lot ! I’ll come back later on with my other formats and check if anybody is brave enough to answer !
Thanks in advance anyway
T.

dj paige ... thank you.

I did an update on my ipad and now I have to restore it but it says I will lose everything How can I get my pictures on there before I restore my ipad to factory settings?

I did an update on my ipad and now I have to restore it but it says I will lose everything How can I get my pictures on there before I restore my ipad to factory settings?

They will be gone from the iphone, but you should be syning all contacts to your computer regularly and should be importing all pics to your computer regularly, particularly before any update.
Have you failed to do this?

What are the best export settings to use...

Operating system: Vista SP1
Camera: Canon HF100 (1900x1080 HD quality 29.97fps) -- uses AVCHD compression which is H.264 I believe.
I'm able to watch my camera video files in Vista nicely. However, I'm having trouble with the watching the results of my edited and exported videos. Assuming I want the same quality and playability as the source video, what settings should I use in the export?
In the export settings window... I select:
Format: H.264
Preset: HDTV 1080p 29.97 High Quality
Source files have the extension: .m2ts
...I don't change the other values. Then I export. Now the result is an .mp4 file which does not play in Windows Media Player. It does play in Quicktime or iTunes however it plays jerkily... I would like to be able to play it as smoothly as the original source plays... And I'd like to be able to play it in windows media player just as the source can be played in media player. Media player seems to play the source more smoothly than does iTunes or Quicktime.
So what are the best export settings for me so that I can watch my edited HD video on my computer as easily as the source footage???
I've been able to edit and save the results of the edit using the crappy ImageMixer3 video editor that comes with the camera. The results are perfect and play in windows media fine. The files it exports the edited video as is the same as the soure... the file extension is .m2ts
So the problem is how to get Adobe to export the edited video to an .m2ts file or at least to a file type that plays as nicely in my system?

See
Exporting to iPods, cell phones, PSPs and other mobile devices in the PPro Help for details.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

I've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?

i've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?

Typos mad = and
Receive = retrieve

Quicktime crashes when I attempt to change export settings.

Everytime I attempt to change my export settings in Quicktime 7 Pro (File>Export>Options>Settings) Quicktime crashes. I can open the Options window and see what compression I am using etc but as soon as I click on Settings or Filter or Size the next window opens for less than a second and Quicktime crashes along with an annoying tone from Windows.
I have uninstalled and re-installed Quicktime and iTunes with no change. I have also done a complete reinstall of XP home edition including downloading all the security updates, Service Pack 2 etc and I get the same error. This is a new problem because I had been doing this with no trouble just a few weeks ago.
I have also run into some errors if I attempt to update Quicktime. The errors are different depending on the way I try to update.
Going to Edit>Quicktime Preferences>Update Tab>Update I get the following error.
An exception occured while trying to run "Shell32.dll, Control_RunDLL" C:\Program Files\Quicktime\QTSystem\Quicktime.cpl"" If I leave that error window (labelled Run.DLL) open I then get Run a DLL as an App has encountered a problem and needs to close. We are sorry for the inconvenience. and it asks me to send an error report etc etc...
The other update error I get is if I go to Help>Update Existing Software I get
Microsoft Visual C++ Runtime Library
Buffer Overrun detected!
Program C:\Program Files\Quicktime\QuickTimePlayer.exe
A buffer overrun has been detected which has corrupted the program's internal state. The program cannot safely continue execution and must now be terminated.
I've never seen Quicktime act this buggy until recently. This occurs with 7.1. 7.1.3 and the newest 7.1.6.
Custom Windows XP
Running updates with the Apple Software Updater seems to work without any errors.

Okay. I don't know if anyone's reading this thread anymore but there is a work-around. It is a conflict with Quicktime and Nvidia cards. If you go into your display properties then click settings and click advanced, then click Troubleshoot. Slide the hardware acceleration slider all the way to the left. Disabling this does fix it. I know Quicktime and Nvidia are being asked for a fix but in the meantime, this does work.
David

Adobe Media Encoder CS4--Missing part of interface in Export Settings

Hi,
I have a Windows 7 operating system on a 32-bit dell computer. When I open Adobe Media Encoder
I click on the Add button. Then I go to Edit->Export Settings. I am missing some of the
options for instance: adding cue points, parameters, and filters. I think it has a problem with Windows 7, but I'm
not sure.
There should be more options.
I put in my installation disk, but it does not allow you to just reinstall this program.
Does anyone know why this is happening. It works on a computer running Windows XP.

I cannot guarantee that it is not a software issue. Sometimes Matrox is an easy "target." However, with several other Matrox users having similar issues, it does seem that Matrox might be the common element.
One of the issues with troubleshooting Matrox issues with PrPro is that few of the normal responders here have Matrox. Many tried the cards, and most unplugged them for various reasons. Some, like me, have never used them. That kind of limits the responses here, unless a Matrox-user, who has addressed such issues successfully, drops by with some tips.
Good luck, and please update the thread, especially if you do get a "fix." Others will benefit, and I will learn something new!
Hunt

Adobe Media Encoder will not allow me to export settings

I am trying to export the settings from Adobe Media Encoder 6 so a co-worker can use them to encode videos with the same settings I have. However, when I click on edit, export settings is greyed out. Does anyone know what can be done to fix this? If there is another way to pass on my settings I'm open to suggestions.
Thanks in advance for your help.

Sorry, found it,
Didn't realise I could scroll down to find more options in
the Encoder Window

IPad 3 export settings

Similar Messages

Maybe you are looking for