IPad ios6 update Chinese keyboard option missing dynamic selection in zhuyin

After update my iPad to ios6, the zhyin has different keyboard layout. I was told to switch the option to dynamic so I can switch back to the old way.  But I don't see such selection when I am in general -> keyboard -> Chinese traditional zhuyin-> zhuyin (only selection I have)
Help?

You may want to search/ask in the Chinese Mac group, I doubt there is any fix other than asking Apple to change it.
https://groups.google.com/forum/?fromgroups#!forum/chinesemac
http://www.apple.com/feedback/ipad.html

Similar Messages

  • Need to disable one of the select-options in dynamic selection screen

    Hi,
    we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
    Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
    Thanks,
    Ravi

    Hi,
    Get inside your selection screen, by executing your program.
    Now type /h in the field where you enter transaction code and press enter.
    Now again press enter, this will take you debugger starting from your Selection screen.
    You might be knowing this, still if you are not aware of this, this might be a valuable tip.
    From here , you can trace your Parameter name.

  • IOS6 update disabled the option to disable/enable location services

    I have updated to iOS6 (from the earlier latest iOS5.x.). I now notice that the option to Disable / Enable Location Sevices (global / application specific) is now not possible post this update to iOS6.
    Note, I have already tried the "Rest Network Settings" and "Reset Location & Privacy" neither of which seem to have helped, reboot the iPhone does not help either. please advise if you came across this issue.

    Go to settings/general/restrictions then look at location services and make sure it is set to allow changes

  • IPad iOS6 Update Problem

    I am trying to Update new Ipad with iOS6, while updating my internet went down for 2 mins and the iPad is in update mode from last 2 hours. How do I restore or restart the operation ? I am unable to see the progress.. the progress bar is at approx 90% completion from last 2 hours.

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • Execution of report with dynamic selection in method

    Dear Experts,
    I need to execute report 'RCATS_APPROVE_ACTIVITIES' in background in the method after populating field-'Processing status'. Also there is a option of dynamic selections for this report in menu bar. In Dynamic selections, there is a field - 'CREATED BY' which also i want to populate before execution.
    Here I am able to populate field- 'Processing status' like code below:-
    DATA: rspar    TYPE STANDARD TABLE OF rsparams,
         wa_rspar TYPE rsparams.
    wa_rspar-selname = 'LDBSTAT'.
    wa_rspar-kind = 'S'.
    wa_rspar-option = 'EQ'.
    wa_rspar-sign = 'I'.
    wa_rspar-low = '10'.
    APPEND wa_rspar TO rspar.
    CLEAR wa_rspar.
    SUBMIT RCATS_APPROVE_ACTIVITIES
         USING SELECTION-SCREEN 1000
        WITH SELECTION-TABLE rspar
    But I am not able to populate the dynamic selection field- CREATED BY.
    Please suggest(if possible with code) how to resolve this.
    Regards
    Nitin

    Dear KArri,
    Thanks for the reply but this i am performing in the Method of BO and want to execute this method in my workflow. That is the reason, I have posted this in workflow forums.
    For this I have created a customised BO to use in CATS workflow.
    Regards
    Nitin

  • Read Dynamic Selections for LDB ADA

    Hi,
    I have a report program using Logical Database ADA, but for performance reasons needed to include a wrapper program , so that the wrapper program schedules a job in case the report is run for huge volume comp codes.
    Now the actual program uses the logical database ADA, which gives them the option of dynamic selections,So needed to add it to the wrapper also, since we they need to have the option to be able to enter conditions in Dynamic selections also. Now How do I pass the dynamic selections made in the wrapper to the actual program.Was planning to export the selection to memory and then import it.
    I schedule the job or run it in foreground based on the selection made using the SUBMIT functionality.
    Would be great if someone can let me know how to read the dynamic selections entered.
    Thank you
    Lalitha

    Hi,
        You have to use SUBMIT statement with FREE SELECTIONS. Declare RSDS structure and fill them.
    Just refer this block, similar type of code
    Re: Reg: SUBMIT WITH Free Selections
    Thanks & Regards
    Bala Krishna

  • Problems with touch keyboard after ios6 update.

    After the ios6 update, my touch keyboard doesn't work well with certain apps. For example, in pages and Facebook it doesn't push up to reveal the typable area so I can't see what I'm typing. In numbers, I know longer see the old typable area right above the keyboard with the function option and such. Also the automatic cell setting don't work properly. For example, when I put in a date it only lets me change the month. What can I do?

    Try reseting all the setting on the device.

  • What Options Will 3GS Not Have With iOS6 Update?

    What Options Will 3GS Not Have With iOS6 Update??

    From the disclaimers at the bottom of Apple's iOS 6 page:
    Some features may not be available in all countries or all areas. Flyover and turn-by-turn navigation will be available only on iPhone 4S and iPad 2 or later. Cellular data charges may apply.
    Siri will be available only on iPhone 4S and iPad (3rd generation) and requires Internet access. Siri may not be available in all languages or all areas, and features may vary by area. Cellular data charges may apply.
    Shared Photo Streams requires iOS 6 on iPhone 4 or later or iPad 2 or later, or a Mac computer with OS X Mountain Lion. An up-to-date browser is required for accessing shared photo streams on the web.
    FaceTime over a cellular network requires iPhone 4S or iPad (3rd generation) with cellular data capability. Carrier data charges may apply. FaceTime is not available in all countries.
    VIP list and VIP and Flagged smart mailboxes will be available on iPhone 4 or later and iPad 2 or later.
    Offline Reading List will be available on iPhone 4 or later and iPad 2 or later.
    Made for iPhone hearing aids require iPhone 4S.

  • What is the size of ios6 update on iPad

    I started updating my iPad(3rd Generation), for about 1 hour it was displaying the message"estimating time remaining"...So I decided to update my iPad via itunes..The difference I noticed in size was that on iPad it showed 791 MB and via itunes it showed 1.1GB.So I just paused my iOS6  update to iPad .Now What should I do? Should I update iPad to iOS6 directly or should I update it via itunes....

    I did mine via my computer's iTunes. Usually the direct updates on the iPad only download the parts of iOS that need updating, whereas downloading it via your computer it downloads the complete iOS version

  • Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!

    Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!
    How do I get this feature working again? I am reluctant to move to iTunes 10.7 because I don't trust Apple at the moment.

    My suggestion:
    1) Always using MAC AIR with the power plug in.
    2)Don' let the power level of battory fall under 30% percentage.
    3)If the MAC can't be recharged now, just let it be with power plugged, WAIT...

  • Capacity maxed out on ipad after updating to iOS6

    capacity maxed out as "Other" on ipad after updating to iOS6.  How do I fix?

    You can try this, but it appears as though the download went bad and you might very well have to restore your iPad to get rid of the "Other",
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    "Other" consist of non media content .... App documents and files, contacts, calendar entries, Safari bookmarks and history, notes, email messages and so on. It should not be bloating your iPad storage.

  • Automated addition of Chinese Pinyin keyboard options

    I have Windows 7 x64 sp1 machines with both English and Chinese keyboards installed.  The Chinese keyboard is
    Chinese (Simplified) - US Keyboard and was installed via regkey during the image process, using the input locale code for Chinese Simplified 00000804 
    from here
    http://technet.microsoft.com/en-us/library/cc766503(v=WS.10).aspx
    I have  a request to add the Chinese (Simplified) - Microsoft Pinyin New experience input, and Microsoft Pinyin ABC input styles, which are additional options when navigating to Region and Language-Change Keyboards-Add-Chinese (Simplified PRC)
    There aren't locale codes for these, how can I add these selections to my windows 7 machines in Asia in an automated way, without having to touch each one manually? 
    thanks in advance for any direction on this
    Tony

    Hi, Tony.
    For Chinese (Simplified) - Microsoft Pinyin New experience input the code is  E0210804, you can follow the same way here:
    http://technet.microsoft.com/en-us/library/cc766503(v=WS.10).aspx  
    The Chinese ( Simplified )-Microsoft Pinyin ABC Input Style uses the same hex code 00000804 as well as the Chinese ( Simplified )-US Keyboard.
     The only differences are due to the Layout Display Name and the Layout Text. You could change it in the following registry location:
    a. Click Start, click Run, type regedit in the Open box, and then press ENTER.
    b. Locate and click the following registry key:
     HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Keyboard Layouts\00000804
    c. For the Chinese ( Simplified )-US Keyboard, the Layout Display Name sets the value: @%SystemRoot%\system32\input.dll,-5072
    d. For the Chinese ( Simplified )-Microsoft Pinyin ABC Input Style, the Layout Display Name sets the value: @%SystemRoot%\system32\input.dll,-5076
    e. By Default, the Chinese ( Simplified )-US Keyboard is configured for the Layout Display Name and the Layout Text. In order to configure the Chinese ( Simplified )
    -Microsoft Pinyin ABC Input Style as the default input keyboard, you may write a script to modify the above registry file.
    Regards

  • When it will be possible to have the armenian keyboard on the iPad iOS6?

    when it will be possible to have the armenian keyboard on the iPad iOS6?

    Hey Mantas,
    Do not expect that feature any time soon. I do not even see that being a feature this year.
    Considering all that is going on and required to be finished and sorted a lot more is/will need to be done.
    In terms of what you can do I have done things like used the refer a friend form which you can style and use that to send emails out to the needed people. I have submitted multiple web forms with ajax etc as well.
    You have the custom fields for the people and emails (if not you can add them) and you can use those to send emails off to people, you just do not have a workflow so your not pestered with it but the notification message is the one that goes out and can have a template applied.
    So there is a number of things you can do to get that going along those lines. I have done a few variations of this on different sites.
    Warning note though - Ajax submission for custom web forms has a total character limit (all fields) of 1024 characters, which is not a lot.

  • HT204204 i cannot update my iPad because there is no option of update in my ipad

    I cannot update my iPad because there is no option of update on my iPad

    If you are really running iOS 4 there would not be that option, it was added in iOS 5. Connect your iPad to your computer and update it in iTunes.

  • Personal hotspot option missing from my ipad , please do help me fix this problem

    why is the personal hotspot option missing from my ipad ?

    Personal hotspot is only on the iPad 3rd generation and higher and the iPad mini, not avail on the iPad 2. Heres the information from apple about the personal hotspot http://support.apple.com/kb/ht4517

Maybe you are looking for