Read Dynamic Selections for LDB ADA
Hi,
I have a report program using Logical Database ADA, but for performance reasons needed to include a wrapper program , so that the wrapper program schedules a job in case the report is run for huge volume comp codes.
Now the actual program uses the logical database ADA, which gives them the option of dynamic selections,So needed to add it to the wrapper also, since we they need to have the option to be able to enter conditions in Dynamic selections also. Now How do I pass the dynamic selections made in the wrapper to the actual program.Was planning to export the selection to memory and then import it.
I schedule the job or run it in foreground based on the selection made using the SUBMIT functionality.
Would be great if someone can let me know how to read the dynamic selections entered.
Thank you
Lalitha
Hi,
You have to use SUBMIT statement with FREE SELECTIONS. Declare RSDS structure and fill them.
Just refer this block, similar type of code
Re: Reg: SUBMIT WITH Free Selections
Thanks & Regards
Bala Krishna
Similar Messages
-
Values of dynamic selections for LDB DDF
Hi
I have to customize a SAP standard program which is using LDB-DDF. As per client requirement, we have to add a few select statement and there we have to add the selection criteria of dynamic selections.
The problem I am facing is that I dont know how and where i can track the values given in the dynamic selection screen.
I did some research and I found out that values entered in the dynamic selections is stored in complex data object (deep structure) but I am not able to find it where and how we can use it.
The name of the SAP standard program is RFDZIS00.
Thanks in advance
BhavHi,
In SE36-> DDF-> select the Selections radio button.
Menubar Extras->Selection Views-> Here you can change the "origin of view" which is created by SAP or we can create our own views under "origin of view" CUS.
Best Regards,
Mohan, -
Hello Guys,
I hope some of you will be using the LdB FMF and the many SAP reports that use FMF. It is in Funds Management, specifically for Public sectors.
There are some transactions for the program RFFMEPGAX. When any of these transactions or program is executed, the selection screen comes up with some PRE-DETERMINED NODES for dynamic selections. There are about 20+ nodes for FMF, but the dynamic selections are available only for 5 nodes.
I am not able to figure out where and how these nodes are restricted. I need to make few other fields available for dynamic selections. I hope some of you will be able to help me out.
Thank you all for your time.
PS: I am not sure, but think FMF is available only in Enterprise.The nodes for dynamic selection that are displayed are the nodes that the program is using. Try this simple program that uses LDB FMF:
REPORT zcdf_ldb_test.
TABLES: fkrs, ffnd.
WRITE: sy-datum.
I get dynamic selections for only these 2 tables. Keep adding tables and you get more nodes for dynamic selection. So when you see 5 nodes, the selection screen is trying to tell you that only those 5 tables are used by the program. Making more available that the program does not use would be misleading to the user.
You can use transaction SE36, and do a where used on LDB FMF to find other programs that use this LDB and execute them to see how the number of dynamic nodes changes.
In SE36, click on Selections to see all of the tables available for dynamic selection.
Is this the information your were looking for? -
Selection-screen dynamic selections for dtab
Hey experts,
when I add this to my code
selection-screen dynamic selections for zbr_t_autori
and I want activate it, it writes out an error
The addition "DYNAMIC_SELECTIONS" is only allowed in INCLUDE DB__SSEL.
and I don't know how to solve it, what is that include db__ssel?
Can anybody help me.
Regards,
RobertCheck this:
Structure of Logical Databases - ABAP Programming (BC-ABA) - SAP Library
Where are you using this code?
selection-screen dynamic selections for zbr_t_autori
It should be in the include reserved for your LDB selection: -
How To Document: Dynamic selection for InfoSpoke
Hello
I have downloaded and read the "How To" document: Dynamic selection for InfoSpoke & Use InfoSpoke Badi to correct KYF format
link: https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/01d3a090-0201-0010-9783-bc33ab690e70&overridelayout=true
I'm mostly interested for the dynamic selection part of the document and the code for that seems to be stored in an attached text document (ZLX_ESS_INTERFACE.txt). The problem is that i cannot actually view it or any other txt in the pdf.
Can anyone who has got the txt file link it here please or suggest a program that would dynamicaly change the infospoke selections?
Actualy i'm not interested in having an input screen for filling the variable value, i just want to get the value from an ODS
any suggestions?
Thanx in advance
FragiHello
I have downloaded and read the "How To" document: Dynamic selection for InfoSpoke & Use InfoSpoke Badi to correct KYF format
link: https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/01d3a090-0201-0010-9783-bc33ab690e70&overridelayout=true
I'm mostly interested for the dynamic selection part of the document and the code for that seems to be stored in an attached text document (ZLX_ESS_INTERFACE.txt). The problem is that i cannot actually view it or any other txt in the pdf.
Can anyone who has got the txt file link it here please or suggest a program that would dynamicaly change the infospoke selections?
Actualy i'm not interested in having an input screen for filling the variable value, i just want to get the value from an ODS
any suggestions?
Thanx in advance
Fragi -
Dynamic Selections for the F.42 report
Hii Experts,
I want to add a field called Business Place(BUPLA) in dynamic Selection in tcode F.42.
So, in F.42 KDF Logical Database is used, so i make a Custom Selection view for KDF database.
Business place is successfully added in Dynamic Selection, but it doesn`t reflect when i execute F.42.
When i test from SE36, it reflects.
Nitin GargNote 50370 explains in full detail how the system works for selecting the documents with dynamic selection.
Balance report reads the transaction figures which are stored with the help of several different fields, so the selection according to further fields cannot be proceed. This is standard design.
The dynamic selection for Document Data does not work for reports which use customer / vendor transaction tables (KNC1 LFC1),i.e., document data like doc.number and Doc.date is not stored in transaction tables.
Dynamic selections can only be used with customer / vendor, company code
or fiscal year fields. The following reports are affected by this
program design.
S_ALR_87012186 - Customer sales
S_ALR_87012082 - Vendor Balances in Local Currency
S_ALR_87012093 - Vendor Business
S_ALR_87012079 - Transaction Figures: Account Balance
S_ALR_87012080 - Transaction Figures: Special Sales
S_ALR_87012081 - Transaction Figures: Sales
S_ALR_87012105 - List of Down Payments open at Key Date - Vendors
S_ALR_87012172 - Customer balances in local currency
RFKSLD00 - F.42
RFDSLD00 - F.23
Hope this clarifies.
Kind Regards
Soumya -
Hi,
I am using logical database PSJ. I need to use dynamic selections for fields PROFIT CENTER,COST CENTER.
But not PROJECT,WBS ELEMENT ETC. For this u can run the transaction s_alr__87013573 .
Kindly help me immUse
Loop at screen.
if screen-name = 'XXX'.
screen-active = 1.
endif.
modify screen.
Endloop. -
Hi,
I am trying to use the LDB PSJ in one of my custom Reports,
We are interested only in the "Dynamic Selections" part of the LDB.
Right now the report works fine without any LDB assigned,but once the LDB is assigned,
the report code does not get executed. Am assuming the LDB is doing some check and exiting
without executing the report code.
The selection screen is not modified, i.e it still displays my custom Selection screen
and not one by the LDB.
Is there some way of disabling this selection or this check.
and also how do I go about programming to use the fields selected in the dynamic selection
for my select statments.
Am assuming will be able to get the fieldname once the user selects it ,and then will be able to us them
Appreciate any input
Thank u
LalithaHad u got the solution , i am facing the same problem
Thanks -
Hi,
I want to include two fields of custom infotype in dynamic selection of LDB so that they are handeled automatically by LDB while selection.
can anyone tell me how to achieve the same?
Thanks
-AleriaThankyou for the reply. However, can you plz tell me the step to followfor addition of fields after copying the LDB.
-Aleria -
How to extend dynamic selection for Logical Database PNPCE
Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
RanjithHi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith -
Dynamic select for all entries?
Hi!
Is it possible to do a dynamic SELECT FOR ALL ENTRIES IN... command?
sg. like:
DATA:
select_text TYPE string,
from_text TYPE string,
where_text TYPE string.
SELECT FOR ALL ENTRIES IN <gt_table1> (select_text)
into corresponding fields of table <gt_table2>
FROM (from_text)
WHERE (where_text).
Thanks and Best Regards,
TamasHi,
you can use the Dynamic Selects for FOR ALL ENTRIES, but i think you may need to use the correct Internal table to match the tabel structure
Regards
Sudheer -
Dynamic selections for the FBL5N report
Hi Experts,
Can any body help how to add the account assignment group field in dynamic selections for the FBL5N report.
rgds / SriniHi Alex,
Thanks for your quick response, here for the report FBL5N the logical database is DDF and the field which should be add in dynamic selection is (KTGRD) account assignment group is available in KNVV table but this table is not available in DDF logival database.
Please suggest us how we can pickup this field into the report FBL5N for dynamic selections.
regards / Srini -
The dynamic selection for profit center in FBL1N isn't working
Dear all,
I have one one issue regarding FBL1N.
The dynamic selection for profit center in FBL1N isn't working.
If we enter profit center, we don't get any value.
As per developer after debugging, table BSIK is not getting updated, hence values are not updating in the report.
Please let me know, any configuration is missing.
BR,
ShailendraTry BSEG and see if its there for the particular doc. If its not there its a functional issue, you have to capture profit center at the time of entry. You can either make the profit center field mandatory or substitute it at the time of document generation. Consult your FI consultant. If u have activated New GL features the profit center may me in table FAGLFLEXA. but i don't think u can get the profit center from this table for your purpose, you may need to develop a zreport.
And its not BISK its BSIK
Edited by: Harisankar S on May 4, 2010 3:05 PM -
Dynamic Selection for FBL1N and FBL5N reports
Dear all,
is it possible to show more fields in Dynamic Selection for FBL1N and FBL5N reports?
Thanks in advance
AlbertoDear Alberto,
Please refer to the SAP note 310886. In the note you should be able
to see how to add fields in to the dynamic selection , and the fields,
which are available for this.
I hope this can help You.
Mauri -
Read Dynamic Selection contents of a Variant for QE51N
Hi Folks,
Need your help here !
In my report, I wish to read the Variants along with their contents created for transaction QE51N.
I tried using function module RS_VARIANT_CONTENTS and its working good, but not to my requirements. The function module returns only the selection screen contents of a given variant. It does not return the contents in 'Dynamic Selection' (Free Selection).
I read somewhere that the function module returns dynamic selection contents only if the report use Logical Database. To my understanding, the program for QE51N (SAPLQEES) do not use LDB.
So is there any way by which I can get dynamic selection contents of a variant?
Any suggestions / pointers would be a great help.
Thank you.
Regards,
Sud.Hi,
Did you find somethings? I have the same issue.
I would like to add some new fields on Dynamic Selection screen of QE51N.
Thanks in advance.
KR,
Arnaud
Maybe you are looking for
-
HP LaserJet 2605dn latest driver problem/bug
Hi I just downloaded and installed the latest driver for this machine, upd-pcl6-x64-5.7.0.16448.exe released a few weeks ago. I found a problem and hope someone can verify and fix it later. That is, when I change the "Paper type:" to something other
-
No more details other than above . I have uninstalled and re-installed FIREFOX several times and still get this issue. Also, very slow in connecting to websites.
-
Is there a way to prepopulate an af:query form??
Hi, I am trying to implement an use case mentioned below: User tries to create a certification by going through a Train. During this process, on a particular screen, they can Query by applying whatever criteria they want before creating the record. (
-
Slideshows within composition widgets
Is it possible when inserting different slideshows into a composition widget (different slideshows placed within different targets) to have the slideshows start from the beginning when the corresponding trigger is clicked? I'd like the slideshow to p
-
Hey there , i m writing u becoz i Need your help , Plz plz plz reply me Don't ignore this. Actually my boss gave me a module of a project , on OLAP , in which i have to design a simple JAVA Based application using Swing, I have designed its front end