Ipad is frozen, after sliding the log off bar the screen is grey and a small circular icon is spinning in the centre of the screen.

My Ipad has been freezing up.  I just tried to log off and after sliding the log off bar the screen is grey and there is a small circular icon spinning in the centre of the screen.  Over half an hour now.  Has anyone run into this before?

Try and hole the home button and power off button at the same time until the iPad shuts off,do not let to of either button until you see the Apple appear in the screen. This will reset your iPad without loosing anything and try power off with the slide bar again after you complete the steps.
Hope this helps.

Similar Messages

  • Ipad is frozen after attempting to download IOS upgrade. Wish i hadn't. Cannot turn off. What are the options.

    Ipad is frozen after attempting to download IOS upgrade. Wish i hadn't. Cannot turn off. What are the options?

    You will have to force the iPad into recovery mode and data will be lost unless you have a backup.

  • Firefox Always "First Run" After Reboot or Log off The PC.

    Firefox Always "First Run" After Reboot or Log off The PC, No Deepfreeze. I have scanned the PC and no virus. How To fix that?

    Firefox Always "First Run" After Reboot or Log off The PC, No Deepfreeze. I have scanned the PC and no virus. How To fix that?

  • My Ipad has frozen after updating, it has the itunes emblem and a usb cord image on the screem, what do I have to do to get it working again?

    My Ipad has frozen after updating, it has the itunes emblem and a usb cord image on the screen, what do I have to do to get it working again?

    You need to start the latest version of itunes on your computer and connect your iPad in order to restore it.

  • My iPad is frozen. Does not turn off or charge just black screen with logo. Tried to reset by pressing the two buttons and nothing.

    My iPad is frozen. Does not turn off or charge just black screen with logo. Tried to reset by pressing the two buttons and nothing.

    Then you should try restoring the iOS software next. Read this and pay attention to the last part of the article that describes recovery mode, you may have to restore your iPad that way.
    iTunes: Restoring iOS software - Support - Apple

  • Capturing the LOG OFF url click action in a Webdynpro application

    Hi,
    I have this requirement where I need to know when the User logs off in a webdynpro application.
    I have several webdynpro applications, each independent, and each need to do some clean up tasks when the user clicks on the LOG OFF url in the portal login.
    Is there some standard event attached with the LOG OFF Url of the portal login?
    And could anybody please specify when exactly would the  <i>wdDoExit()</i> method of the application view(s) or the application component controller get's trigerred when the application is run from the portal login?
    Thanks in Advance.
    Regards,
    Swapna Priya.

    Hi Luciano,
    I was successfully able to call the RFC from wdDoExit() method of the component controller.
    Also I could successfully place a custom alert call when the user clicks on the LOGOFFurl in the portal browser.
    Now I have one more pending requirement for me to completely use this cycle of events.....The Portal Browser close action i.e., 'X' action.
    I did find a forum link with some code for the same but i did not understand where to place that code and have already raised a reply for hte same.
    Below is the link:
    /message/230174#230174 [original link is broken]
    Do you have any idea about how to trap this?
    Thanks for all your support
    Regards,
    Swapna Priya.

  • My screen is frozen after I hooked it up on my laptop for synching and this window appeared asking to have the ipod updated. Now it won't do anything.

    My screen is frozen after I hooked it up to my laptop for synching and this window appeard asking for update. Now it won't do anything.

    Have you tried a hard reset yet to see if that makes a difference?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.  This may take a couple of tries.
    B-rock

  • I downloaded new os for my daughter's ipod touch.  I remember during setup after that I checked off my husband's email account and now she is receiving his texts.  How do I fix this.  The "icloud"/ "messages" buttons are both greyed out under settings

    I downloaded new os for my daughter's ipod touch.  I remember during setup after that I checked off my husband's email account and now she is receiving his texts.  How do I fix this.  The "icloud"/ "messages" buttons are both greyed out under settings

    Forgotten RESTRICTIONS Passcode
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod.
    - If you are up to file manipulation see:
    How to reset forgotten Restrictions...: Apple Support Communities

  • Run time error occured while clicking the Log off

    Hello Experts,
    I have customized masthead file. In the masthead, when i click the log off link, the pop-up window will showing the Runtime error message. Its not working properly. I didnt make any changes in log off method. I traced the error,
    <%if (!isPreview){%>
              if (EPCM.getUAType() == EPCM.MSIE)
                   if(EPCM.getGlobalDirty())
                         // unsaved data on the page, display modified dialog
                        var val = window.showModalDialog('<%=GetLogoffConfirmUnsavedMsgURL(componentRequest)%>', '', '<%=LOGOFF_CONFIRM_MSG_ARGS_IE%>');
                        if (val == 'logoff')
                             disableWorkProtectCheck = true;
                             logoff();
                   else //no unsaved data
                        // data saved, nothing get lost on the page, display normal dialog
                      var val = window.showModalDialog('<%=GetLogoffConfirmMsgURL(componentRequest)%>', '', '<%=LOGOFF_CONFIRM_MSG_ARGS_IE%>');
                      if (val == 'logoff')
                          logoff();
              else
                   if(EPCM.getGlobalDirty())
                      window.open('<%=GetLogoffConfirmUnsavedMsgURL(componentRequest)%>', '<%=LOGOFF_CONFIRM_WINDOW_NAME%>', '<%=LOGOFF_CONFIRM_MSG_ARGS_NS%>');
                   else
                      window.open('<%=GetLogoffConfirmMsgURL(componentRequest)%>', '<%=LOGOFF_CONFIRM_WINDOW_NAME%>', '<%=LOGOFF_CONFIRM_MSG_ARGS_NS%>');
         <%}%>
    In this code having if condition if(EPCM.getGlobalDirty()) is set as true means, then only properly executed and it shows the Log off message. In my part it goes to the else part. Then it shows run time error message.
    I cannt able to find out the solution.Pls help me in this regarding.
    Regards
    Prakash T

    Hi,
    see if running SFC /Scannow helps. This basically restores missing/corrupt system files.
    Click Start/Run and type CMD
    Type SFC /Scannow
    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):
    http://support.microsoft.com/kb/310747/EN-US/
    Please Reward Points if Helpful.
    Kind Regards,
    Vamsi.

  • Why do I have to "set up" Airport Connect. after "sleep" or logging off?

    I installed OS 10.5.4 a couple of months ago. Ever since then each time I log on to the internet or just get my mail (from Apple Mail) I get a message that I'm not connected. I then have to punch a multitude of buttons to get on again. I've found no help in any sources I've been to. We're cable with a router and an ethernet on our office computer. I haven't installed Leopard on it--I'm afraid of the problems I'll have. It's ethernet.
    It's the airport MacBook that's having the log on problems. Any help from anyone?
    P.S. I've assigned our NetGear to be the first on the list of connections. (I have several other coffee shop type places in the list as well.) So, the problem is coming from somewhere else in the OS system. Thanks!
    Message was edited by: YamahaC3

    Is your router firmware up to date?
    A quick search of the forum turns up an identical issue
    http://discussions.apple.com/thread.jspa?messageID=8115186&#8115186
    You might search for losing network or airport connection. There are many similar posts.
    Message was edited by: nerowolfe

  • When i open my computer I get the white screen with apple symbol and there are vertical lines all over the screen with green pixels and after a few minutes the screen gets grey and I get message to restart my computer what happens

    3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
    Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
    On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
    Can somebody advise me on this matter. Thanks in advance

    You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
    If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive. 
    You can also boot into Safe mode
    To start up into Safe Mode (to "Safe Boot"), do this:
       1. Be sure the computer is shut down.
       2. Press the power button.
       3. Immediately after you hear the startup tone, press and hold the Shift key.
          Tip: The Shift key should be held as soon as possible after the startup tone but not before.
       4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    Please post back with results,
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

  • Please help! I just sync my notes to icloud of my ipad mini but after that all notes has been covered by iphone's and all notes are missing from iPad,how could i restore it?

    Please help! I just sync my notes to icloud of my ipad mini but after that all notes has been covered by iphone's and all notes are missing from iPad,how could i restore it?

    It's very possible that you did just as you suspect. One of the later Note file over wrote the one stored on your iPad when you synced.
    When one does a sync of their iPad a backup of the iPad is created first. If that backup was still available you might be able to find the Note file there. But more than likely, if you are letting the iPad and iPhones sync on their own over Wi-Fi you have over written that back up as well.

  • My mba won't restart.  it freezes up.  i would have to push the on/off button to shut it down and restart up. please help

    my macbook air works fine but i can't restart it. it freezes up and displays the thinking circle.  after i push the on/off button it shuts down fine and restarts fine.  please help

    Ops I replied to myself in error.....
    Tom:
    I performed the steps indicated but this morning when I clicked the mouse and hit the space key and clicked the track pad again as before nothing happens.
    I hold the power button for a few seconds and the screen fills as if the computer was normally awakened but it is locked up.
    Then I have to shut it down with the power button  and then power it up as a reboot.
    Not good...SMC reset didn't work....Throughout the day yesterday I put the computer to sleep and woke it up normally.  It seems to be a overnight problem.
    Am I going to have to shut it down everynight?
    Jim

  • So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

    So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

    If you're on windows try the following:
    This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
    1. Quit itunes
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
    3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
    4. press ENTER
    5. Reboot your machine
    6. Restart itunes & connect device to sync
    7. Good luck  

  • My computer suddenly refuse to start. When I turn it on it gives the startup sound but the screen is grey and after a while a little folder icon with a question mark inside turns up. It doesn't blink. What to do? Nothing happens if I try to start up from

    As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
    I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
    I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
    Anybody have any good advice?
    I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.

    You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
    https://discussions.apple.com/message/23957654#23957654
    Peace
    Harry

Maybe you are looking for