IPhone 3G software change
Hey guys, I have an iPhone 3G and 4G, because I find the 3G really slow but I don't wanna waste it... is there anyway that I could change it's hardware or processor, etc so it could run faster?
No way at all, they handsets are not upgradable.
Similar Messages
-
I have 3rd party software wirelessly injected and used on my iphone with a cryptographic authentication system without my consent (seems to be new technology developed by stanford and apple security is not updated for this technology) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail breaking my phone, adding and removing software, changing settings all from a remotely controled device from different location (I have a Mac address I'd of this device to know for sure). Almost undetectable. When I look at the legal section of my phone it shows a list of all the unauthorized 3rd party software "as is" copyright encrypted on the phone. This is the most basic way to legally steal software of any kind. Because of this legalality 3rd party ownership have total control of certain software correlated with hardware use including visualization technology, etc. most people luckily will never have this happen to them so it's unlikely many readers have not a clue of what I'm saying currently. Either way, without needing to obtain specific warranty of any kind "as is" copyright control makes system restores not a solution because the source code is not directly encrypted on the actual hardware device only a copy right notice must appear on the specific device 3rd party software validation making it extremely difficult for me to take control of the situation. Apple claims their iOS technology prevents this type copyright obstruction from being possible, however, according to my phone a new form of technology was used developed by Tom wu of Stanford university called the STANFORD SRP AUTHENTICATION TECHNOLOGY which uses Some form of cryptographic authentication system and uses quote "secure remote password" which seems to suceed in hacking iOS apple technology apple claims is not possible to jailbreak an unstolen phone or without the owners consent As well as loading the device with 3rd party copyright Notices to make all of this legalized. My phone shows atleast 30 pages worth of legalized 3rd party copyright permissions! Yesterday my apple care provider labeled me a jailbreaker and refused to look at my legal documented proof which completely blew my mind because it voides my apple care contract I spent 100 on. This employee did not take all factors into consideration and made quick assumptions as well as verbally speaking to me as I'm an automatic criminal. I left the store yesterday with no payed insurance help on a problem I had no control over and couldn't prevent, leaving with voided contracts. This is an apple users worst nightmare and I have spent days researching all of this like i am some kind of lawyer only to be able to use my phone the way it should and spent alot of money on. I can legally backup any claim I have just wrote above currently and have a large source of data collected to prove apple is wrong in voiding insurance support on this issue. The problem lies in apple avoiding and not wanting to believe their software can legally be obtained ot "hacked". Yet still labeled a jailbreaker basically.. What should I do????? Been to local apple store 3 times and rebooted my phone as well sprint service restore 4 times and spoke with reps twiice on the phone. Spoke with my phone provider who said apple has full control over these matters so they can't help me. My case is according to apple "still open"...Anyone else heard of this or of Stanford's office of technology licensing? Maybe I need to buy a blackberry again or just use a landline so I can stop being my own lawyer and focus on other productive areas in life instead of this horrible mess. I shouldn't have to prove to apple I not a jailbreaker they should have to prove I'm one before voiding support I desperately need!!
Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data. -
my Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?
Try the basics from the manual.
restart.
reset.
restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
Error: Windows Vista failed to start. A recent hardware or software change might be the cause
PLEASE HELP!
My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
I tried the following on my Lenovo:
Windows repair menu = "windows cannot be repaired"
Lenovo Rescue and Repair
Rescued my files from Hard-drive (copied to external hdd)
Restore System = Failed
Diagnose hardware = HDD passes all tests
Don't know what else to do with = Boot from another device ? Access BIOS?
Because I do not have the windows vista install disks
I purchased and downloaded the recovery disks from neosmart.net
The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
I don't know what to do next?
Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
Will I still have windows?
PLEASE HELP!Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
Help needed: iPhone 4 software upgrade failed many times
Hello. I've bought an iPhone 4, which its operating system is 4.3, and was prompt by iTunes about this iPhone 4 software upgrade to iOS 4.3.5. I've downloaded the software and waiting for quite some time and after the dowloading has completed, the file will be processed. After processing, there is a popup saying that somehow the software upgrade failed and said something like make sure that your connection is correct etc. Do you have any idea on how to solve this issue?
Help me, please. Thank you very much.This is asked and answered many times each day. The forum search bar is on the right side of this page.
Diasble your firewall/security software and try again. -
I have a 3G iPhone and have changed my email and Apple ID on my laptop/iTunes account.
How do I get this new ID to show on my 3G iPhone.
I still have the old ID and cannot update my Apps.
PLEASE HELP !!
thanks, NosuhDid you purchase or download the apps with your old ID? Apps are tied to the ID that is was purchased from.
If it is a new app you bought with your new ID, you can go into settings - appstore- apple id and then log out. -
Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software
No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT -
Iphone 3G Software Update Fixes security vulnerability associated with viewing malicious PDF files?
Is there an Iphone 3G Software Update Fixes security vulnerability associated with viewing malicious PDF files? Latest version I can download is 4.2.1
I assume no fix is available, does anyone know if I'm still vulnerable to the security bug?No fix is needed since that vulnarability isn't in 4.2.1.
-
I am having difficulty in updating my iphone 3GS software from version 4.1 to version 5.1. I tried using my phone but cannot find the update software button even when I have gone through the right process by tapping SETTING, then GENERAL, yet could not find Update Software button. I mean the update Software button is not seen there.
I tried using itunes, yet no way. Each time I connect my iphone to my laptop itunes software comes up automatically and alerts me that a newer version of software for my iphone is available, It usually gives me the option of Download & Install or Download Only. Whichever of the option I click a message will always appear telling me that the iphone update server could not be contacted, then asking me to make sure that my network settings are correct and active or try again latter. Sometimes, when click on the Update button on my itune software. It will display an error has occured.
I have even tried to Restore iphone from itunes, yet the problem keep repeating itself.
Can anyone help me?Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now. -
I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipodI reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.
-
My hp failed to start it says, A recent hardware or software change may be the problem.
my hp failed to start it says A recent hardware or software change may be the problem. It gives the option of Launch start up repair or Start windows normally, it freezes after clicking any option. What can i do?
My pc is a Compaq Presario CQ62-216DX Notebook. It also says on the screen, Description: fix problems that are preventing windows from starting.Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Windows failed to start. A recent hardware or software change... Bootcamp
Hello everyone, I really need help...
I have a MacPro, Snow leopard, BootCamp 3.1. I installed Windows Vista Ultimate on Bootcamp. I also use Vista home on Parallels 6 (this might be a factor, I don't know yet).
Everything was fine. After a few days, when I tried to start up my mac in Vista via Bootcamp, I get a black screen from windows (windows boot manager), telling me a recent hardware or software change might be the cause. File: \Boot\BCD Status:0xc000000f An error occurred while attempting to read the boot configuration data.
After that, the system freezes.
When I start back up in OS X, I open the BootCamp Drive... and nothing is on there. Unmounting and mounting doesn't help. Before I was able to see the files. The only way to repair is to delete and make a new partition. I have 3 HDDs so I decided to dedicate a complete single, physical drive to Windows. Same thing after 3 days. Programs I used under Mac OS X were Parallels, Dragon Age, Steam. But nothing which should write or delete the Windows Boot.
What is the problem, anyone else experiencing the problem? It is a pain, cause re-installing it every 4 days and updating it all takes half a day.At this day and age, I'd dump Vista.
You can:
try safe boot
run sfc /scannow
restore to last restore point
rollback driver update
run chkdsk and attempt to fix bad blocks
boot from your Vista DVD and use System Repair features
run out and buy Windows 7 Pro x64
Ask Paralells forum
I have been using Windows 7 Beta, RC and release rock solid on Mac Pro and two PCs.
You tried Bing I hope. Quite good hits.
http://www.bing.com/search?q=Boot%5CBCD+Status%3A0xc000000f
There are currently two ways of repairing the Windows Vista bootloader:
1.With EasyBCD via the Diagnostics Section.
(Recommended, Easy to use and guaranteed results)
2.By booting from the Windows Vista DVD and using the recovery console.
(Use if you cannot boot into any version of Windows to use EasyBCD) -
Windows failed to start. A recent hardware of software change might be the cause.
Hello,
Last night when I was finished using it for the day I went ahead and shut it down. Prior to shutting it down it was working perfectly fine. When I went to boot it up this morning, I kept getting the error that windows was unable to start normally and it took me to startup repair multiple times. I don't have the operating system disk (Windows 7) anymore I'm not sure if my computer just didn't come with a windows 7 disk. All I know is that I don't have it anymore. I tried basically everything I could find on the internet that was supposed to help with it and nothing works. I tried going into safe mode and using the command prompt, still nothing. It's now just showing up with a screen saying "Windows failed to start. A recent hardware of software change might be the cause. But like I said, this comes as a problem seeing as though I don't have my windows disc. I would really like to now if there is a way to fix this problem. I am requesting your help to fix this issue.try to download and burn a copy of win7 from forums.MyDigitalLife.info
match your version and bits of windows
then run repair / Startup Repair 3x off the win7 dvd without letting it try to start into windows. rebuilds your partition tables and fixes a lot of things.
if that doesnt get you into windows... read up and run SFC /offwindir /offbootdir from the win7 dvd
you dont say much what you've tried .. i assume you tried from the F8 menu / startup repair / an older system restore date ?
You need the windows7 dvd !!! -
Windows 7 32 bit failed to start .A recent Hardware or software change might be the cause.
Windows 7 32 bit failed to start .A recent Hardware or software change might be the cause.To fix the Problem.
1.Insert your Windows Installation disc and restart your computer.
2.Choose your langauge settings and then click "Next".
3.click "Repair your computer".
status:0xcooooooe
Info: The boot selection failed because a required device is inaccessible.
please find me solution immediately. it's urgent.Hi 12345Kiran,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and looping repair screen on startup. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore.
I would be happy to assist if needed as there are many models of HP I would need the model number. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Windows failed to start. A recent hardware or software change might be the cause.
I'm using HP dv6 7043 cl. My system was really slow. It was taking almost 7 mins in startup. I tried to reboot but I think I chose the wrong option while doing it. I pressed F9 button. It asked me to choose DVD-R or usb. I chose dvd option as my recovery was made on discs. Later it gave me the hp recovery menu options. There, I chose system recovery. It did it successfully but now the windows is not starting. It says Windows failed to start. A recent hardware or software change might be the cause. Can someone please help and tell me how can I solve this issue and again get back my original windows?
Hi,
Assuming this may just a problem with the recovery media/process, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source - Digital River.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
Performance Measurement - CRM UI
Hi, I am working on a CRM Search Application which involves development of a CRM BSP UI for the CRM Sales area. The question I have applies to all CRM applications that have a BSP UI. Is there any means/tool using which I can measure the overall time
-
I need help with problems after the April 2015 update
In December 2015 I purchased an LG G3. It started out great. Then often people couldn't hear me..sometimes with the speaker on, sometimes with it off, sometimes on bluetooth with my car,.or my voice faded in and out, or sounded muffled or garbled. A
-
After the software update to my iPhone 5, i cannont access Facebook. What do I do now?
After the software update to my iPhone 5, i cannont access Facebook. What do I do now?
-
Where can i get detail process and command upgrade CRS 10.1 to CRS 10.2?
where can i get detail process and command upgrade CRS 10.1 to CRS 10.2? I want upgrade CRS/RAC from 10.1.0.4 to 10.2.0.4 (HP-UX)
-
I iphone 4 wont load any kind of app or video
my i phone 4 wont load anykind of app or video in wifi or 3g