Iphone 5 problem with in & out going call with iOS 8.1

I have a iphone 5 and i had updated it to ios8.1 recently.
After doing so, i started having problem in both in and out going calls. It work only for a brief period after i restart the phone but after a while it gives me the same trouble.
I already tried to reset the phone to factory settings, but it still doesnt effect.
Please help me to get rid of this problem..
Warm Regards
Smaran

Hello there, Smaran89.
Great job troubleshooting on your own to resolve your issue. The following Knowledge Base article offers up some great and thorough recommendations for troubleshooting issues with making or receiving calls on your iPhone:
iPhone: Troubleshooting issues making or receiving calls - Apple Support
Follow the steps below to resolve this issue. Please test after each step.
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problem

There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem.

My iPhone 5 is blocked and goes wrong with IOS 8.2.

My iPhone 5 is blocked and goes wrong with IOS 8.2. How can officially return to IOS 7.12?
The phone goes slow, hard contacts are loaded, the phone got stuck a few times.
I would like to return to the IOS 7.12, but can not. Problems have occurred since the IOS8, but I hoped to solve with iOS 8.1 or 8.2. On the contrary, the situation was worsened.
What can I do?

I have a 64GB model
Contacts are displayed harder. Not appear depending on usage, as IOS 7.
All functions of the smartphone go late.
Now I installed iOS 8.1 and did not improve anything
It happens rarely that's right, the smartphone to block everything and need to restart. But we claim that we have an Apple that should function without resets
I understand that the processor does not support well IOS8 iPhone 5, but I want to return to IOS 7 as the smartphone was perfect
Apple must know these problems and have to accept a return to IOS7 for iPhone 5
They were given a warning only 3, 3 g, 4, 4s
I have friends with iPhone 5 that meet the same problem and they will return to IOS7 if possible
I think that Apple has a problem in this regard
Another version of IOS 8 can not resolve the situation, because it seems that the processor can not handle this software
I would be very happy if Apple will understand the situation, and someone at Apple will give me an answer or a solution

Out going call problem

i have iphone 5
i am not able to make out going call
i restore twice but no use
other functions is working properly like incoming etc

Hi kittupatsa,
If you are having issues making calls on your iPhone, you may find the following article helpful:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Regards,
- Brenden

Why do out going call take so long to connect?

Sometime it can take up to 3 minutes for an out going call to connect. It does not seem to matter how many bars I have or where I am.

Thanks for you reply. I would love it if my outgoing calls would connect faster. Yesterday it took 5 minutes to connect.
I have am LG spectrum running VS93022A firmware, Android version 4.1.2. I did have a lot of recent calls stored, so I deleted all of them and them I removed my battery and reinstalled it. Finally, I ran a software update check. All these activities seem to have fixed the problem. I now takes only seconds for a call to connect.thanks!Susan
>> Personal information/e-mail reply/headers removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Out going caller I.D still not changed

how can i change my out going caller I.D, i have called and emailed, i was even assured that it would be changed, still waiting, mean while my freinds and family are ignoring my calls, the name in question is foreign to them

We've called Verizon at least 7 times and asked them to correct this problem. Everyone has a different answer. Today, they said we needed to take the batteries out of all of our landline phones to "clear the memory" and that would fix it. Still not fixed. I don't think anybody at Verizon knows how to change the caller ID banner !

My out going call failed

my out going call failed

please let me know which service provider you are using if it is vodafone then follow this simple procedure type
*#31# and press the call button your problem is solved

My Iphone shows I have an additional call with "unknown" as the 3rd person

My Iphone shows I have an additional call going on with "unknown" as the 3rd person. Then when I hang up the unknown is still an open call but the timer reads 0 mins/secs. Has anyone else experienced this and what is the cause?

I Think its just a bug, but i don't normally hold three lines open

IPhone 6 pictures coming out faded and with awful quality

My iPhones pictures come out faded and with poor quality

Did you try to set the exposure manually?
copied from page 89 of the user guide iOS8

Since updating to IOS 7.0.2 my IPhone 5 regularly cuts out during calls. Anyone else have this problem?

Since updating to IOS 7.0.2 my iPhone 5 regularly cuts out during phonecalls. Anyone else having this problem?

reset all settings
settings- general- reset - reset all settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
if issue persists backup info and restore via itunes
Peace, Clyde

Binding parameters to dynamic VO with PL/SQL API call with no where clause

Hi all,
I am required to change exisiting queries to queries with "bind" parameters. Some of our VOs are dynamic and with PL/SQL api calls like below:
String stmtStr = "selectXXX_API_UTILS.chk_urg_since_last_prg("
+ projectId + "," + PPCId + ",'XYZ_TASKS'," + taskId+ ")"
+" from dual ";
ViewObject tmpVO = transaction.createViewObjectFromQueryStmt(stmtStr);
In this regard, I am unsure how to bind the PPCId and taskId parameters to the VO. setWhereClauseParams() would not work here as there is now where clause.
Thanks in advance,
Srini

In case of preparedStatement, we mention bind parameters to be passed using "?". Then we pass paramters sequencially.
But in the your case following is enough:
int projectId = 100 ; (hardcoding values for example)
int taskId = 500 ;
String stmtStr = "selectXXX_API_UTILS.chk_urg_since_last_prg("
+ projectId + "," + PPCId + ",'XYZ_TASKS'," + taskId+ ")"
+" from dual ";
-Anand

My iTunes is playing the films with sound out of sync with video

I bought some films off of the iTunes store and whenever they're playing, the sound is out of sync with the video. Why is this?
Please help.
Sam.

Maybe this will help. My first movie I made in IMovie approached thirty minutes long. I read in a book that any movie made in IMovie that approaches that length or longer will start to lose sound sync. The trick is to extract the audio from the video. Sure enough it worked for me.

Problems with filling out/going back and editing filled out information and signing forms

Users cannot fully fill out, edit and save forms--
the forms were set up in InDesign CS6, then edited in Adobe Acrobat Pro 9 for all the form info and after that was set up the forms were saved as extended pdfs to allow adobe reader users to fill them out and sign.
The users are having all kinds of issues with the forms and its been difficult to pin point the exact cause.
Here are 2 errors:
This document enabled extended features in Adobe reader. This document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document.
The security settings on this document prevent adding text and/or placing a signature on it from Adobe Reader. To fill out and sign this document you need to print it out.
---I've checked the security on the form and there is no security not allowing them to fill it out and I believe that originally they were able to but the form was saved and then they went back and were unable to edit it. I need to know if its something I need to do on my end or an instruction I need to give to them--steps to filling out and saving programs vesions to use etc..
sorry for some of the holes in the info. the form was created for a client and they sent it out to their employees so I do not have direct contact with the people having the issues just two screenshots, and I have not been able to find an answer that works--this is what I thought would help but it didnt:
It should solve the signature/adding text issue—From : http://forums.adobe.com/thread/987256
Your user should go to Extended pane in Reader to apply a digital signature to the Reader extended PDF.
The user is probably trying to use the Sign pane in Reader which has some options disabled according to the document permissions. The new Sign pane in Reader is an integration with Adobe EchoSign service in the sense that it enables an end user to fill-up documents, electronically sign and then send a PDF document, without having the need to print them. The Sign pane provides two options to the user:
1 - Fill and Sign: Here the user can place text using 'Add Text'. Users can add arbitrary text to a PDF, eg. in documents where Reader cannot interact with the document even though the document looks like a form, in forms where user cannot save the filled-up form. In such cases the only option a user has is to print the form, fill it and then fax or fedex the filled up document to the author or scan it and send it electronically. Using the Sign pane in Reader, a user can add text and also electronically sign the document (this is not the same as digital signature) using an image of their signature. He can create a 'signature' from a scanned paper which has user's handwritten signature and place it on the PDF.
2 - Send for Signature: Here the user is sent to EchoSign for collecting signatures from others.

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

How can we get the web cam to work with sykpe or any out going calls

can get the web cam to work with skype

Hey there,
What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Problems w/ out going calls hearing me

I have had my Droid X for 5 weeks now and suddenly having problems with people hearing me. I have no problems hearing them but they can't hear me.People claim that I sound like I'm 10 feet away.I also noticed that I do not have the 3G signal. I received another droid because they couldn't fix the problem and now I'm faced w/the same problem. Any help would be greatly appreciated.

You dont have a 3G signal when you are on a call. Have you rebooted your phone. Its like a PC and needs to be rebooted every now and. The reccomendation is to turn your phone off and on everyday .

Iphone 5 problem with in & out going call with iOS 8.1

Similar Messages

Maybe you are looking for