IPhone 6 display got zoomed while using the camera (happened after update to iOS 8.1.3)

Hi, after updating to the newest iOS version (iOS 8.3) I have experienced a lot of graphics issues. I experiensed it in the keyboard with some of the "button pop-ups" lingers. Also, when I rotate the phone it kinda shows a negative version of the screen besides the normal one during the rotation animation.
However this is not the big problem.
Cause, while I was about to take a picture, using the standard camera app, I zoomed in stretching two fingers away from each others. Suddenly the whole screen zoomed in, not only the camera. So after that I can only see a limited part of the screen. I have tried to turn the phone off and on and it seems promising during the startup (I can then see the apple logo in normal size), but as soon as it comes to the locked screen it zooms in again.
Because of this IO am now unable to use the cellphone and I consider to downgrade to 1.2.
I appreciate all suggestions.

To disable Zoom double-tap the screen with three fingers.
Go to Settings > General > Accessibility > Zoom and turn this OFF.

Similar Messages

  • Anyone not get the camera shortcut after updating to ios 5?

    anyone not get the camera shortcut after updating to ios 5?

    Tried double pressing the home button when on lock screen?

  • The camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

    the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

    Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

  • I lost my Iphone 3GS. My brother has given me his Iphone 4 now. We both use the same notebook to update and sync our phones. I would like to know how can i reconnect back to my account using the Iphone which was previous used by my brother.

    I lost my Iphone 3GS. My brother has given me his Iphone 4 now. We both use the same notebook to update and sync our phones. I would like to know how can i reconnect back to my account using the Iphone which was previous used by my brother.

    If you are saying that you both have iCloud accounts and use the same icloud ID, then yes, the contacts will be deleted.  The idea is that all devices using the same icloud ID are kept in sync.  You need to use different IDs.  You can keep the same iTunes ID so you can share the songs and apps.  But use different icloud IDs.

  • Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24?Also, if I use a backup created AFTER updating to ios 6 when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the backup?

    Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24? Also, if I use a backup created AFTER updating to ios 6, when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the version of ios 6 that I created the backup on?

    There has never been a legit way to downgrade.
    It will always restore to the latest available software.

  • HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

    My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

    Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
    (I'm using an ipad 2 iOS 6.1.2) 
    And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
    No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

  • Why I cannot use SIRI in Japanese after updated to ios 5.1?

    Why I cannot use SIRI in Japanese after updated to ios 5.1?
    I can see the language is there but it doesnt work

    Check your settings to make sure Siri is actually enabled.  Sometimes I find that Siri will disable during the updating process.  Oh, and it should be iOS 6.0 not 6.1.  6.1 doesn't exist...yet.

  • IPhone 5 touchscreen becomes unresponsive and requires to lock/unlock after updating to iOS 8 and 8.0.3

    While using the phone frequently the screen becomes unresponsive, only the home button works and I need to lock and then unlock to get it to respond again.
    I have an iPhone 5 64GB.
    it's really annoying.
    I've restarted the phone a few times but the issue persists.

    Thanks for the tip but the problem persists.
    I restored the phone as new with iOS 8.0.2, the freeze problem appeared.
    Then I restored the backup, the problem persists, but I have the impression that is a bit less frequent, I'll confirm in the following days.

  • Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

    My device is Iphone 5 64gb IOS 8.
    I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
    1. How can i fix it?
    2. Or how to rollback to IOS 7+ ?
    3. Should i come to app store with this problem?

    I'm having this same problem too.  Worked fine prior to iOS update.  I contacted Verizon this morning who advised that this is a known issue.  They suggested I backup my device, and perform a factory data reset.  When prompted to update to iOS 8 again, re-installation has been known to resolve the issue.  With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

  • IPhone switches Off while using the Camera

    For example:
    I have 20%, 50% or 80% and i want to take a photo.  (Problem is represented at all battery capacity levels)
    I open the Camera App, take 2 or 3 photos and 1 panorama.
    And then the iPhone abruptly turns OFF.
    When i want to turn it on again, the "Low battery" is shown. Trying it again after 10 minutes, it turns ON and the battery capacity is the same as before.
    Any ideas what the problem could be?
    Sorry for that English!

    To disable Zoom double-tap the screen with three fingers.
    Go to Settings > General > Accessibility > Zoom and turn this OFF.

  • Can I use my 3G iPhone as iTunes server while using the free remote app from another iOS device

    Can I use my 3G iPhone as iTunes server and use the remote app
    with another iOS device

    You should be able to set up numerous IMAP accounts on your iPhone with no problems.
    IMAP will not sync contacts and calendars in your local copy of Outlook.

  • IWeb quit unexpectedly while using the SFWordprocessing plugin after 10.6.6

    installed snow leopard OS X 10.6.6 so I could run Pixelmator. opened up iWeb and was tooling around with a 2nd website as to not alter my current website. I added in a imovie and played around with a pg before closing, pretty sure I did not save it just closed it down..... when I went to open back up..... I get the above saying "iWeb quit unexpectedly while using SFWordprocessing plugin. I fallowed the path to the file that was having issues but I have no idea what to do, I have folder that say MAC OS and others under the new 10.6.6
    I tried to locate the file and do as I read online by erasing the plug but didnt work? I shut down and opened in safe mode restarted as well so it's not the Font issue......
    I never backed up my MAC and erased the disk fore installing OS X 10.6.6 So not sure what to do??
    I was going to rebuild my entire site from scratch but would idealy like to restore the original but I can't even open up iweb??
    HELP PLEASE!!!

    Stuart ~ Welcome to the discussions.
    "I was having this same problem after installing Snow Leopard. After exhaustive research, I disovered that deleting your iWeb preferences file will solve this issue.
    Open your User Folder, then Library/Preferences (you will NOT find this file in your HD Library/Prferences folder - you must be in your user folder). Find the file named "com.apple.iweb.plist" Delete the file by dragging to Trash. Restart you comupter." (Source)
    ...If that doesn't help, more suggestions may be found by doing THIS.

  • While using the youtube widget and updating it to my website, the adobe program closes beacuse of an error. What can I do about that?

    Hi,
    I like to update my site with the youtube widget and a youtube movie. But when I use the widget and put it on my website, adobe muse will close because of an error? Does anybody have the same issue?Help with using Adobe Muse CC

    Hi,
    could you please provide the complete error message or a screenshot of error window

  • My iphone4 reacts very slowly when I use the button.Problem after updating to newest IOS

    My Iphone 4 respond very slow when I use the button. The problem started when i updated to new IOS 6.0.1

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • I can not use the Chessproblems website after updating to Firefox 5

    After updating to Firefox 5 I can not have full access to the Chessproblems website, http://www.chessproblems.com/prob.php?id=648&next=1
    I had no problems before. Can you help with this?
    Thanks,
    Edward

    Solved after downloading last Java version

Maybe you are looking for

  • Unable to start admin server service for weblogic (startWebLogic.sh) Linux

    I installed ECM 11g on Linux 64-bit , installed weblogic 12 so when I try to start admin server service for weblogic (startWebLogic.sh) and following error its showing I found solution to give full access permeation for the user , but it's still same

  • Help needed ... Default tables in XML Schema

    Hi all, I got a xsd definition here that does not do as I say ... g Though I specified default tables for Cisco_Card and Cisco_LogicalModule, not only the default tables with the names I specified are created but also additionally tables with the def

  • "_unknown" user issue

    I recently bought a new mac (iMac 27") and used the migration assistant to move my profile from my old mac to the new one. However, prior to doing so, I created a couple of IDs one or two of which had admin access. After I then successfully migrated

  • Question about Dreamweaver CS3 capabilities

    I am a new user of Adobe Dreamweaver CS3 and I was wondering if it is possible to create a website where people can leave comments directly on the site. If this is possible, how is it done?

  • How to search for a string in a DefaultListModel

    I have a list of names stored in a DefaultListModel and would like to know how i can search for a particular name i assume i would have to use the method below but not sure of how to implement it so basically i would have a texfield where a user can