IPhone and iPod cable and dock ----

Hi,
I was told that the dock connector for iPod and iPhone is the same; yet when I try and use the USB dock cable that came with iPods, it always gives me an error message " this accessory is not made for iPhone...."
I bought the iPhone universal dock adapters and I plugged the adapter in the iPod universal dock and when I docked my iPhone, I got the same error message so I am a little concerned using either of the 2 accessories since I am scared that it might damage my connector.
The iPhone cable that came with iPhone is smaller even though the dock connector is the same.
Does anyone have any advise or ideas on this?
Thanks.

Not sure, I have an 80GB iPod Classic. I don't use the dock, but charged it in its case.
When I first got my iPhone, I used the iPod cable on my desk to charge the phone and everything always worked fine. So, the iPod and iPhone both charged with the same cable.
I recently got the Apple Bluetooth Headset, and had to change cables, but the cable that came with the headset can also chage the iPod without problem.

Similar Messages

  • Charge iPhone with iPod cable

    I was wondering if I could charge and sync my iPhone with my iPod cable, allowing me to leave one at work, and one at home. I just got the CDMA iPhone, and I have the 5th generation Video iPod 30GB. I heard that there is a difference with amps or power or something. I don't want to mess up either batteries. I heard that maybe you can charge but not sync. I have found a bunch of different answers. Thanks.

    The cables themselves are the same for the iPods, iPhones & the iPad. The power adapters may be different, but all of the USB cables are essentially the same.
    ~Lyssa

  • Iphone 3gs no video to tv with apple cables and dock

    i have a 80gig classic 5th gen which i use with the apple component dock and cables to watch videos on my tv.however to get it to work correctly i have had to use a 3 plug scart adaptor for the connection at the back of the tv. discarding the component green and red pb, pr cables and only using the audio and blue.
    if i use the component connection as i am meant to then the picture is not very good and is in only shades of red and white.
    i cannot get a picture from my nano 3 gen ipod or my new iphone 3gs no matter what arrangement i use.
    i can confirm all the leads were bought in february this year including the dock with remote - all as detailed on the website suitable for use with both the new iphone and nano 3 gen.
    i have checked and tried all the various combinations of the settings and connections to no avail.
    i was going to buy a new classic 160gig but im now afraid if i do it wont work.
    can anyone on this forum provide reasons why the nano and iphone wont tv out as meant to, the only thing i can think of, is that the leads have been upgraded without being advertised as so - and if true is very underhand by apple.
    iphone, nano 3 gen, classic 5 gen Windows Vista

    Not sure what the problem could be, but have you looked at the manual for the ipod touch? Maybe it can help.
    http://manuals.info.apple.com/enUS/iPod_touch_3.0_UserGuide.pdf

  • Is there any differences between a iPod nano 1st gen usb cable and a iPhone 3G  usb cable? thanks

    Is there any differences between a iPod nano 1st gen usb cable and a iPhone 3G  usb cable? thanks

    Yes you have a one year warranty from the date of purchase from Apple. Go to this link and on the bottom right hand side it will ask you to enter your serial number and will tell you if you are still under warranty. http://www.apple.com/support/
    If you are you can take it to a Apple store, or request service online here http://depot.info.apple.com/ipod/
    If it is out of warranty you can google a third party service provider and get it serviced out of warranty. There are two that I know of that provide free diagnostic service. You only pay for shipping and they will tell you what is wrong and what it will cost to fix. They are ifixipodsfast.com and ipodmods.com but there are others also (I just have no experience with them) Good luck and as was stated it should charge from your usb. and just for grins, look at the docking connector on your ipod and see if there is any obstruction that is obvious.

  • IPhone and iPod with video docking station.

    I just got an iPhone and was happy to see that it fit in my iPod with video docking station. But when I plug it in I get a message that says that this docking station was not meant to be used with the iPhone, and then it just syncs up and works fine with iTunes anyway.
    So what's with the warning? Can the phone be damaged by the docking station? Should I be worried? And if there is nothing to worry about, why splash the warning?
    Thanks, I look forward to your insight.

    There are very few if any docks that are compatible with all functions of all ipods as well as the iphone 3G. Even Apple can scarcely manufacture one (although with a series of adaptors and optional cables they sell a "universal dock"). One of the biggest issues is the charging, as the 3G only charges via the 5 volt USB standard. I don't think there is a risk of damage, but an incoming call could generate some noise artifacts in your sound system. Have you been able to output video from your phone with that dock, and does it charge? BTW which dock are you using?

  • HT1665 how do i know which converter to use for my iphone and ipod dock station

    i have a dock spaeker for iphone and ipod it does not support iphone 5s where do i get a converter from and which one do i get

    One of these adopters/cables should work:
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

  • My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

    My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
    Has anyone asked Apple directly about this?

    Hi there Apples or Pears,
    I would recommend taking a look at the troubleshooting steps found in the articles below.
    Charging your iPod battery
    http://support.apple.com/kb/ht1384
    iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    -Griff W.

  • My iPhone 4 will not charge, have used different chargers, cables, and docks, also a hard reboot is not working, what do I do now?

    Ok so I woke up this morning and found that my iPhone 4 was 2% and about to die even though I had left it on the charger over night. Also, you may want to know that the charging icon does appear over the battery, it just won't actually charge.  So I plugged it into my husbands charger which is an apple charger plugged into the wall. This had the same result. So we have some docking stations that simultaneously charge while they play your ipod, 3 different docking stations ended in the exact same result, a icon but no charge.
    Next my husband did a hard reboot by holding down both the top button and the home button until the system turned off and rebooted. We tried charging after this will the exact same result. My phone has now died. Can someone please give me some idea of what to do next, just saying take it to the apple or AT&T store seems like the obvious answer, but are our options really so limited?
    Also note that we have checked the bottom of the phone on the charging port and it is clean and to the eye unbroken.

    yes, your option is as limited as getting it into the hands of an apple store employee (or if you have to ship it.. if there is not a store close by)
    My wife's old 3G had this problem, it is a battery issue.  They replaced my wife's iphone within a day, but I'm not confident any amount of user troubleshooting will fix your problem

  • My daughters iPod touch (4th gen and 4 months old) is not recognized by iTunes (PC) or our stereo docking station, but it will charge. Other devices (iPhone and another touch) work fine on PC and stereo. What is wrong??

    We have an iPod touch 4th generation (4 months old) that is charging on our PC but is not recognized by iTunes. It is also charging on the docking station of our stereo but is not recognized by the stereo (will not play music). Other devices (2 other iPod touches and an iPhone) are recognized by both the PC and the stereo. What could be wrong with this particular iPod touch??

    What are the model iPods and iPhone and iOSs that work?
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple l
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    The following may result in in the inability to regain full use of the iPod if iTunes does not see the iPod
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    problem solved.
    I phone 4s screen froozen

  • For protection for the iPad, iPhone, and iPod cables

    I have an idea for more supporting and protection for the iPad, iPhone, and iPod cables.
    Make Rubber Expansion Joints Longer than 1 centimeter At least.

    this is a user helping forum apple dont read or write here if you want to give them suggestions then
    http://www.apple.com/feedback/iphone.html

  • USB cable the same for iPhone and iPod?

    It looks the same, but I want to make sure before I plug it in. I was hoping I could my iPod cables (i have several) for my phone, so I don't have to buy extra phone cables or drag them around with me.

    Yep, I do exactly that all the time. They aren't the same shape, but they can be used interchangeably.

  • Iphones and ipods need to work together.

    I'm having some very bad issues with my ipod touch.
    Last night I needed to charge my iphone, so I plugged it into my laptop for a little while.
    I normally don't do that, but my regular charger was not available to me.
    I never told it to sync with my laptop, and I think it must have, because today when I plugged my ipod touch into my laptop it was no long accepting the touch.
    And god forbid itunes accepts my iphone AND my ipod. I don't waste my iphone battery power playing music, so I need my ipod to take care of my musical needs.
    So I have to go through the inconvenience of resetting my ipod. I have attempted to reset my ipod EIGHT TIMES, and each time itunes freezes, or cannot complete the reset.
    I get error 14, and the troubleshooting page has been of no help.
    I really like the ipod, it's always been a handy device, but I am sick and tired of this. If my ipod and iphone cannot coexist peacefully on the same computer, then the iphone must go.
    By the time I need to get a new cell phone, it will not be with Apple.

    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    To prevnet in future turn off autosyncing so that you have to overtly start a sync. To turn off go iTunes>Preferences>Devices and check the box that says "Prevent iPods...".

  • My iphone and ipod are not longer being charged by the pc

    my iphone and the ipod are not longer being recognized by the computer

    Clean the dock connectors.
    Try a different sync cable.
    Try a different USB port.

  • I have the new ipod 5 and when i go to plug it in it wont charge ive used 4 different out lets and docks so its either the ipod its self or the cord

    i just got the new ipod 5 for christmas for my daughter when she goes to plug it in to charge it,it wont charge we have used 3 differend outlets in the house so its not that...we have also used different docks bc i have an ipad so i just used that dock and it sill wont work so its either the ipod its self or the cord..i dont no but i just want to figure this out so if you can help me that would be greatly appericead.

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. I suspect a cable
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

Maybe you are looking for

  • Connecting a Monitor to iMac

    I am wondering if I can connect a monitor to my iMac in order to expand the display image. If so, how can I actually do that? Thanks much in advance.

  • New ipod touch does not have firmware 2.0

    I ordered my ipod touch on July 17th, after the firmware release but still have the older firmware. Am I still supposed to pay for the firmware update? I have no idea whom to pose this question to at apple. Any ideas/thoughts?

  • Send system measurement to SAP

    I can't send system measurement from system XY in transaction USMM, because the RFC connection SDCC_OSS doesn't work. I want to know if I only via SOLUTION MANAGER can send this measurement or I have to change the RFC connection on the system XY? Tha

  • Linking a PC to an iMAC

    I've been using a PC for a while now (Mainly because of the price). I've finally got the money together to get a great new iMAC....But I don't want to toss my PC. Ultimately I'd like to use an ethernet to connect my PC and iMAC. I'd like to drag all

  • Help!How can I find the name of a calling procedure from within a procedure/function?

    Is there anyway to find out the name of calling procedure(database) from within a database stored procedure/function? This is required for creating an auditing module. Thanks, Abraham =========== email:[email protected]