Iphone and Windows Vista

Has this ever happend to anyone, i bought a new computer in Janaury plugged in the iphone after itunes and my ipod had already worked correctly. Then once the iphone was syncing the dreaded "blue screen" popped up. My computer crashed losing everyithing I had just put on it, after many frustrating phonoe calls to Dell, they finally sent out a new one - because nothing they did could fix it.
So here I am with this new computer it has been working fine for the past 5 months, but I am very leary about hooking up the iphone.
Should I be this nervous about hooking the iphone up? THe itunes and ipod are working just fine.
Basically I have been just using my old dog of a computer for updating the iphone software.
I guess it serves me right for not converting to an Apple/Mac!

KTP1971,
If you get a blue screen when you connect an iPhone with pictures taken on the iPhone, it can be a conflict with the drivers for a webcam or scanner.
This article has more information:
http://support.apple.com/kb/TS1502
Hope this helps,
Nathan C.

Similar Messages

Iphone and Windows Vista problem

Okay, so I have windows vista and the iphone seems to be having a hard time with that.
When I plug my Iphone into my computer it recognizes the apple device and asks if I want to import picture. In itunes it shows the button that the Iphone is plugged in and synced, however, when I press that button nothing happens. I can't add any photos to it because everytime I try there is some kind of error. What can I do?

Same exact problem!
Upon returning home after picking up the long awaited iPhone 2, I discovered that my iTunes and/or Windows Vista would not detect the iPhone, and I’ve been searching the Internet for a solution since (going on day two now). Apparently, Vista and the latest iTunes have had this problem quite a lot.
It’s really a shame, as I think Apple is missing a singular opportunity to use the iPhone as a transition drug to more Apple products. I for one have been looking for a reason to dump my Dell and pick up a MacBook Pro, and the iPhone seemed to be it.
However, if I get caught in the middle of a ******* match between Apple and Microsoft, well, they both lose.
When you spend this kind of money, it is imperative that the thing works out-of-the-box. I will never purchase a Dell again for just this reason. Now, if I purchase a Lada, well, I'm expecting to put in some hours and blood to get the thing air born, but an Apple product? No way.
Please help me become an Apple customer.

ITunes iPhone and Windows Vista - Syncing Issue

I was trying to upload 2 new albums I have and it seems it re-synced my whole music library to my iphone.
Is there a video or something I can watch that shows how to use iTunes correctly, and to sync new songs without having to re-sync the whole entire library to my iPhone.
Thanks.
Black MacBook, 2.0GHz Core Duo, 1GB Ram, 80GB, Superdrive Mac OS X (10.4.10) 8GB iPhone

There really isnt much to syncing music. I have read several posts of folks complaining that making a simple change to one song caused the entire library to resync.
Suggestion - turn off automatic syncing when you plug your iPhone. Then choose Sync only selected items, and then select all your music. Sync. Then make a change to one song and manually sync again. See if only that one song syncs.

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description:          Dell Wireless 1397 WLAN Mini-Card
IP Address:          192.168.0.118
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Tue Apr 17 16:59:28 2012
Lease Expires:          Wed Apr 18 16:59:28 2012
DNS Servers:          192.168.20.254
                    192.168.30.217
Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description:          Broadcom NetLink (TM) Gigabit Ethernet
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured. Using itunes 10.5.2.11 and Windows Vista 64

I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!

I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

Iphone and windows 8 compatibility?

When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

I have no issues with Win 8 working fine with the latest (win 8 compatible )
iTunes

Is there a fix for the incompatibility between itunes and Windows Vista?

I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

Hey Don,
What exactly happens after you install iTunes? Do you see an error message?
This article describes device filter issues that can be caused by application conflicts:
http://docs.info.apple.com/article.html?artnum=305422
Jason

Is Magic Mouse compatible with PC and Windows Vista

Hello to everyone, I'm a new member of this forum, I hope someone will help me, please.
I'm taking a look at the latest beautiful Apple's product and I felt in love with Magic Mouse, I'd like to have it for ma PC (not a Mac) with OS Vista.
Is there anyboby who knows if this mouse is compatible with a Pc and Windows Vista OS?
Actually I don't have bluetooth thecnology on my pc but if Magic Mouse were compatible I'd buy an usb adaptor.
Thanks to everyone will help e!

I asked a similar question a few hours back and no answers yet. I think nobody knows since nobody has had the chance to test them. If previous releases are any indication, you'll probably get basic functionality because it is bluetooth, but for the advanced features or setting options you'll have to wait for a Windows driver, which can sometimes take a few months or more.
My thread: http://discussions.apple.com/thread.jspa?threadID=2205313

Ipod nano first generation and windows vista

I finally got everything to work right with Itunes and Windows Vista except one minor problem.
On my ipod, the blue "dot" does not show up when a podcast is new, so in a long lists of podcasts, I can't tell which ones I already listened to.
Is there a way to fix this?
Thank you, Debra

I have a new ipod nano and can not download iTunes to Winnows Vista.
Need all the help that i can get. Thanks,
Capt g

Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
Or, am I just misinterpreting this?
Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
Daddy-O
One should welcome adversity as an opportunity to excel.

Hi Daddy-O,
Thank you for contacting National Instruments. This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable. In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver. This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward. Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here. From this installer, you should be able to select FieldPoint 6.0 and install this software.
I hope this helps! Let me know if there is anything else I can clarify. Have a great day!
Jason W.
National Instruments
Applications Engineer

Share filing between Mac and Windows Vista

Hello,
I am trying to file share my iBook and Vista.
On my I book under Finder >>>Network>> I see my computer name "Computer-PC" but the icon is grayed out.
When I click on it it says:
The Alias "Computer-PC" Could not opened, because the original item cannot be found. Then it gives me 3 choices
Delete Alias, Fix Alias , OK
I hit OK it does nothing
I hit Fix Alias, Then it ask me to choose an item to open. I dont know what to open????
I do not want to Delete Alias.
Also I tried to connect Vista and it does see the IBook on the network, but then when I try to connect It asks for the user name and password of my iBook
I verified this by reading the support docs on the Apple website.
System Preference >>>Systems >>>Accounts >> verified and changed password.
Still no luck. Can someone give me some advice? Thanks!!

There are more than a few threads on the topic across the web; so I guess a search
would be in order and some sorting of results to enable a wise choice from them.
There's also the Apple Help built into OS X and some ideas present themselves.
Firewall changes would probably be necessary, and the Sharing (system preference)
panel has some access settings for some of this sort of thing.
(The closest I have been to sharing between a Windows machine and a Mac, is when
I let a few Windows machines mistakenly given to me to troubleshoot & repair, were
brought into my space and they temporarily shared a workbench. I found out what
was wrong with them (outside of the poor quality & shabby OS) -- and out they went!)
•Networking Mac OS X and Windows Vista - google search
http://www.google.com/search?hl=en&q=NetworkingMac+OS+X+and+WindowsVista&btnG=Search
•File Sharing between Mac OS X and Vista - google search
http://www.google.com/search?hl=en&q=FileSharing+between+Mac+OS+X+and+Vista&btnG=GoogleSearch
•Networking Windows Vista and Mac OS X - google search
http://www.google.com/search?hl=en&q=NetworkingWindows+Vista+and+Mac+OSX&btnG=Search
•File Sharing between Windows Vista and Mac OS X
http://www.google.com/search?hl=en&q=FileSharing+between+Windows+Vista+and+Mac+OS+X&btnG=GoogleSearch
edited.

HotSynch Connection gets lost between TE2 and Windows Vista

I'm trying to hotsync (by bluetooth) between my Tungsten E2 and Windows Vista. I got them speaking to each other, but the hotsync starts and never gets past the Calendar. The laptop looks like it's still running, but the TE2 hotsynch log says the connection was lost.
Is there a way to keep them connected long enough to sync?
The TE2 is running Palm OS Garnet v. 5.4.7 and HotSync v. 5.0P
The laptop is running Windows Vista 7 64 bit, HotSync Manager 7.0.2 and Palm Desktop 6.2.2.
Thanks!
Post relates to: Tungsten E2

Oh, yeah, one more thing..the hotsync works fine by USB cable on the desktop PC running Windows XP, so I don't think there's any corrupted databases on the TE2 (because if there was, then the USB cable hotsync wouldn't work)

I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in

I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in the width and height boxes. the cursor won't enter. same thing with resolution. what did i do? what's wrong?

The first thing you might try is resetting the Crop Tool by right clicking on the crop icon in the tool options bar and choosing Reset Tool.
If that doesn't work then the next thing is to reset the photoshop elements 2 settings file by holding down
the Shift+Ctrl+Alt keys just after clicking or double clicking on the pse 2 shortcut.
Keep holding the keys until a dialog appears ask if you want to delete the photoshop elements settings file
and click yes in the dialog.

Iphone and Windows Vista

Similar Messages

Maybe you are looking for