IPhone Application - MySQL Connection

Hello!
I have been searching for the past week for a way to connect to a MySQL database from xCode.
My goal is to develop a simple iPhone Application that connects to a MySQL DB and performs CRUD operations (Create, Replace, Update, Delete).
It would be great if some of you can direct me to the proper documentation, or if this is actually impossible for the moment, I would like to know what would be the most suitable solution for an application that interacts with a server with PHP and MySQL.
Thanks in advance,
HT

Ok... Firstly, I would like to thank you for the prompt answer.
Let me know if I understood properly, please!
So, I am unable to connect directly to the MySQL database on my server from the iPhone application, but I can send messages/variables through POST (and my PHP server does it all - MySQL connection and parsing of the $_POST() array).
You are suggesting that every edit/update/replace... task should be sent through our very common two methods -> GET and POST.
Easy as it may seem, it is still unsafe. One can sniff the packages, and catch the data I transfer. And, besides, I might overload the server with this transmitted data and other operations back and forth.
At first, I was thinking of a much more efficient approach of the problem, and I was actually looking for something like a "MySQL Connect CONTROLLER", very similar to the well known PHP function/method mysqlconnect(server_variable,passwordvariable, ... ).
I am looking forward for your reply,
Thank you!
HT
Message was edited by: horatiu.taina

Similar Messages

TS4006 I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI but no

I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!

If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.

I can connect to all my Iphone applications, however I cannot to Itune store from my Iphne. A message saying: you cannot connect to Istore, your connection appears off, pops up. Help please

I can connect to all my Iphone applications, however I cannot to Itune store from my Iphne. A message saying: you cannot connect to Istore, your connection appears off, pops up. Help please

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

Connect iPhone application to flash media server ?

Hi All,
I Have a flash player application embedded with a website working fine. Now I want to do it in iPhone, fore that i want to send request to flash server. The responses from server are realtime and used RTMP. How can I send request to Flash server from my iPhone application.
Thanks in Advance
Mohammad Sharique

I am assuming that you are using iAS on an NT box. If so, you will need to:
- install DB2 Connect Enterprise Edition on the box running iAS
- use the "Control Center" app to configure DB2 Connect to see the remote
DB2 database (i.e. give it a local name).
Once this is set up, you use the DB2 JDBC driver to connect to the local
name of the database.
That's why you don't need a hostname or ipaddress in the JDBC url.
A couple of points:
- Configuring DB2 Connect to see the remote database is hard, especially if
the remote database is actually hosted by DB2/390.
- DB2 Connect EE is not a lightweight package. It makes the Oracle client
install look small and simple.
Jonathan Esterhazy
"Krisztian Maraczi" <[email protected]> wrote in message
news:9o72e3$[email protected]..
Hello,
I have my application and my iPlanet Application Server SP3 testdrive
edition on
PC1, and I have a DB2 database /and the server of course/ - which I wantto
reach - on PC2.
I use DB2_CLI driver. Where I have to write or sign that my database is pn
PC2?
I do not know because when I use DB2_CLI, I do not use database url.
Thank you
Krisztian

Is there a way to get a log of the bluetooth devices my iphone has been connected to? My Bluetooth car speaker phone was recently stolen from my car and appears to be on Craigslist.

Is there any way to get a log of the bluetooth devices my Iphone has been connected to? I recenly had my Bluetooth Jabra stolen from my car and now a simliar one is on Craigslist. I'd like to give my connection log to the police before I go and see if my Iphone recognizes the device in question. Any way to get any type of bluetooth device connection log out of my iphone?

Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
"Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
http://support.apple.com/kb/HT1414

Jabber for iPhone force auto-connect

Hello,
Does anybody know if it is possible to force Jabber for iPhone/iPad to connect to a wireless SSID network as soon as it is available?
We recently implemented Jabber and we are noticing that some times, users arrive to the office, where corporate SSID is available, but even if jabber is running on the background, it won't automatically reconnect to the network.
User will have to manually open the application and wait for Jabber to reconnect.
Is it possible to make this process automatic for the user?
Regards,

CUCM version is 8.6.2.
Presence version is 8.6.4
Jabber for iPhone & iPad is 9.6.2
The issue is that if Jabber is running on iPhone's background, even if wireless connection is activated, it seems to disconnect. In order to reconnect, user has to manually open Jabber and wait for the connection to establish, especially to make calls.
The same applies when a user is running Jabber, he arrives from outside to the company and wireless reconnects to corporate SSID. Jabber won't automatically reconnect until user opens the app.
Regards,

No Tables in DW CS3 Remote MySQL Connection

Hello All,
I was hoping forum members would be able to troubleshoot a
Dreamweaver CS3/remote MySQL Connection issue I'm having.
I am successful in connecting to the database but the table
data I created in phpMyAdmin 2.6.3 does not appear in the
Application/Databases menu in DW. Instead of the name of the table,
I get "none".
Since I am new to databases, any help is greatly appreciated.
I did view older posts before submitting this one but the advice
recommended (re-installing the entire MySQL application from
scratch) is not an option. Server is SunOS running PHP 4.4.7 and
MySQL 2.0.20. I'm on Windows XP. Thanks once again.

Was this issue resolved?
I have the same problem now. DW was working fine the one day and the next when I started it it had this connection problem.
I am testing on my local PC. My sites is at http://localhost/
All my connection are working because if I go to http://localhost/index.php I can see my site and if I go to http://localhost/register.php I can even register a new user. It will include the new user details in the data base and everything is working fine. So there is nothing wrong with the connection.
In DW I do have http://localhost/ on the Local Info screen. As I said, all was working fine on the current setup the one day and the next day it did not want to work.
Seems like a very common problem.
I want to buy CS4 and surely hope that the problem has been fixed by now.

Flex iPad Application : Run code before application enters background Application Type: Flex Mobile Application Target Platform: iPad AIR Version: 4.0 Development Environment: Flash builder 4.6 I want to run some code just before iphone application goes

Application Type: Flex Mobile Application
Target Platform: iPad
AIR Version: 4.0
Development Environment: Flash builder 4.6
I want to run some code just before iphone application goes into background. I need function similar to didEnterBackground
of native xcode app
(https://developer.apple.com/library/ios/documentation/UIKit/Reference/UIApplicationDelegat e_Protocol/Reference/Reference.h
tml#//apple_ref/occ/intfm/UIApplicationDelegate/applicationDidEnterBackground:)
I tried using devactivated function of flash.display.STAGE.
I used following addEventListener:
STAGE = this.parent.stage;
STAGE.addEventListener(Event.DEACTIVATE, onAppDeactivated);
It worked for me but only when device is connected to development environment in debug mode. When I create my release build
it is not working.
So how can I make sure that my code runs before application goes into background.

Even I am facing almost same issue
Problem installing Adhoc version to iPhone and iPad - Development Environment Is - Adobe Flash CS6

Question about update to iphone application database

Is it possible to preserve and update an iphone application's database when i release an update for the application with a more updated database?

My biggest problem to date has happened today after trying to update the Restaurant Nutrition Application. It completely crashed my iphone, and after trying to do a soft reset, NOTHING. I was able to connect to iTunes by pressing the home botton while connecting to iTunes to do a complete system restore. Everything went fine, till I tried to download some of the applications that had not been synced with iTunes with the exception of Restaurant Nutrition App. since this was the App. that crashed it in the first place. But strangely enough, when I just tried to download a simple game that I loved, (Cannon challenge), Restaurant Nutrition popped up on the screen by itself as if it was trying to download without me even requesting to do so.
This application now has a way of attaching itself even after a system restore when you DON'T WANT IT ANYMORE!! Someone really needs to look into this. It has wasted an entire day of total frustration with my iphone, for NOW, having to do the same thing a second time. ***!? I hope come Sept. 7th, that Apple can restore customer confidence, because each time my iphone 3g crashes, which has happened several times in the past, but never to this degree, I really am beginning to hate this new iphone 3G. I can't rely on it being stable enough when I might actually have to use it......for an emergency phone call, etc.
PLEASE update soooner!

IB isn't aware of my classes-- "Your First iPhone Application"

I'm trying to follow the "Your First iPhone Application" tutorial. I run into trouble on this page:
https://developer.apple.com/iphone/library/documentation/iPhone/Conceptual/iPhon e101/Articles/chapter5_section4.html
The text field does not autocomplete to "MyViewController" nor does it appear anywhere in the list in the dropdown menu. I have called the project "tutorial" and "tutorialAppDelegate" does appear in IB's dropdown menu; I don't know if that tells you anything.
Do I have to do something special to make IB aware that that class exists? I think IB has changed somewhat since the documentation has written because in mine, "View" is called "Custom View," and I have a fourth icon called "Application".

I'm afraid that doesn't really help at all. It tells me that I need to do what I am already trying to do:
1. Create a new nib file using the Cocoa Touch View template and configure it as follows:
a. Set the class of the File’s Owner proxy object to the class of your custom view controller.
b. Connect the view outlet of the File’s Owner to the view provided by the template.
I know that I need to do these things; what I don't know is how to get the GUI to let me. Do I need to put MyViewController in a specific part of the project in XCode? Do I need to flag it as a useable class somewhere? Could I have left out an option somewhere when I made the file?

How to Export Iphone application Recorded data to PC using wi-fi ?

Hi,
I have made Iphone application.
In my application whatever data i have recorded; all that data i want to export to the Computer using the application.
Is there any way available to sent data to computer using wifi using developed application?
Can we use Bluetooth or Http connection to send application from device to the PC?
if we can than how can we manage the bluetooth and how to use it without Jailbreaking?
if any body has any solution,please give any code or any link or any other solution which would appreciated.
Thanks,
Mishal

Seen this thread yet?
http://discussions.apple.com/thread.jspa?messageID=9864422&#9864422

MySQL Connection - Select Database - HTTP Error Code 405 Method Not Allowed?

We've set up a MySQL database with our host and can connect to that, and create, edit, delete tables using HeidiSQL, without a problem.
However when we attempt to set up the connection in the Databases tab of our Applications panel in Dreamweaver we receive the following error:
HTTP Error Code 405 Method Not Allowed
We have entered the following in the MySQL Connection box:
Name: <name of our connection>
Server: <IP address of our database>
Username: <our database username>
Password: <our database password>
Database:
When we click the "Select" option next to the Database field, that's when we receive the above mentioned error.
We noticed that there was a fix posted by Adobe at:
http://www.macromedia.com/support/dreamweaver/ts/documents/err405.htm
...but that link is long since dead, however it does seem to indicate that Adobe are/were aware of this issue.
Can anyone help? We're trying to move from Classic ASP / MSSQL to PHP / MySQL but have hit a barrier right from the off, which isn't very encouraging. Hope someone can ease our concerns with PHP and MySQL.
Much appreciated.
NJ

Thank you SnakEyez02.
I had the Testing Server set to Local/Network but didn't have MySQL installed locally. Changed that setting to FTP and it picked up on the database correctly.
When using MSSQL it doesn't matter whether you choose Local/Network or FTP it just picks up the online database regardless. I guess this must just be a difference between it and MySQL.
Thanks for the advice. Much appreciated.
NJ

Running MySQL Connection for PHP on Dreamweaver8

Good Day:
I installed the MySQL 5.0 and PHP 5.0 to run on my Dreamweaver 8.
On the Application Panel -> Database tabs -> MySQL Connection: after i entered the connection name, user name and everything, it returns HTTP ERROR CODE 502 BAD GATEWAY.
btw, I'm running on localhost
May someone pls tell me what's wrong with it?
many thanks!

Hi,
maybe your issue is related to what´s already been posted to the Dreamweaver Application Development forums:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=263&threadid =1293443&enterthread=y
Günter Schenk
Adobe Community Expert, Dreamweaver

ESA webservice in IPHONE application

Hi all,
I want to build a IPHONE application with a connection to SAP by using webservices. Has someone already done this?
Kind Regards,
Richard

A bit of a late reply, but YES.
I've been working on such an application for quite a while now. The main problem with doing this, apart from there being no web service API in the SDK is that using SOAP isn't recommended for various reasons. We have therefore taken the step of implementing our services as REST services; these are much simpler and I have been told will be available for Netweaver web services in future.
As a starting point you could look at this blog, was very helpful to me to assess the webservice requirements.
Link: [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/web-application-server/p-r/real%20web%20services%20with%20rest%20and%20icf.article]
In terms of the phone app, you should aim to create a single web service requester class which can accept and forward requests for any relevant REST service that you have published.

Running Chuck program from iphone application

Hi,
I am trying to integrate chuck to my iphone application. How I can do this.?
I want to run one chuck program from iphone application.
Regards,
Ganesh Pisal
Vavni Inc.

Expect to get a lot of problems as embedding Java GUI application into native X GUI application is very complicated process which usually requires clear understanding of design of AWT native code for X. One of the problems is events sharing, another is X resource sharing. If you could provide more details on design of your program and interaction with Java we might try to at least estimate hardness of the problems and possibility of such an implementation at all.
The questions are:
1) Does you program uses the same X display connection as Java?
2) What kind of X toolkit are you going to use?
3) How are you going to embed Java windows into you X windows(if at all)?
4) Are you going to use Java X window(or widgets) from your program or you are going to use JNI and Java to interact with them through Java?

IPhone Application - MySQL Connection

Similar Messages

Maybe you are looking for