IPhone bluetooth Windows 7 not working correctly.

Just upgraded my computer to an Asus P8P67 which has built in bluetooth (Atheros). Was messing around trying to see what features I had connecting my iPhone to my computer via bluetooth. When I try to pair it the pair seems to work however when it installs the driver while pairing it says it installs "Not Supported Bluetooth Function" as a driver. The phone does say it connects via bluetooth however as far as I can tell I don't have the features that I should have. When I double click the phone under Devices and Printers it opens up the properties for the phone instead of the screen that shows options like syncing.
So I have two questions:
Is my phone connecting properly? If not is there a known fix for the issue?
What features should I have when connecting my iPhone 3GS to my Windows 7 computer?
I have tested the bluetooth connection with another device and it seems to work fine.
Message was edited by: Axodious
Message was edited by: Axodious

Is it possible to answer calls incoming to my iPhone on my bluetooth connected Windows 7 computer? I have handsfree turned on in the bluetooth settings and the ringtone is going through my computer however when a call comes in I don't see anything on my computer that would let me answer the call, so I have to answer it on the phone still.

Similar Messages

IPhone 5s GPS not working correctly

GPS on my iPhone 5s does not work properly with the cover. I have the cover from apple itself. Does anyone else have the same problem ? If yes , what needs to be done ??

Inside it cannot possible get a GPS signal to receive, so no coordinates. If your iPhone 4 has previously been used outside where it could get a decent GPS signal, then it is simply displaying the last known GPS fix. If the store's iPhone 5S has never been used outside, then its initial GPS fix may take several minutes, to locate and lock onto available satellite signals, and then only with a clear and unobstructed view of the open sky.
To answer your basic question, just look at the tech specs for the iPhone 5S - yes, it has a GPS chipset. But to receive signal from the satellites, you'll need to be outside under an open sky. The signals are quite weak and do not penetrate buildings or much of any overhead structure that obstructs the skyview.
http://www.apple.com/iphone-5s/specs/

TS1559 my iphone bluetooth is not working

Hi i am Ishrat.I like to let you know that my iphone bluetooth and safari is not working .

OK.
Perhaps if you explain your issues, then someone here could help.

Bluetooth does not work correctly with Siemens Tek Connect headphone device

I hopefully tried the new bluetooth support in OS 3.0, but it does not work with my Siemens Tek Connect headphone device. It syncs as expected, but no sound is heard. I can choose the Tek Connect in the music app and other programs, my headphone (actually my two hearing aids, which are connected wireless with ear to ear communications (e2e) via the Tek Connect necklace device) signals the connection to me (a beep), but nothing is heard. Codec problem?
Andreas

I own Phonak hearing aids with their Bluetooth-capable iCom device which allows my aids to be used as a phone headset and also supports the A2DP stereo bluetooth profile. My iPod Touch 2Gen 32GB is able to play to my hearing aids properly.
One thing I noticed is that the iPod does not allow you to control the volume when using Bluetooth. It expects the headphones to be able to control the volume. Have you used your hearing aids as Bluetooth headphones on any other device? Maybe the device isn't programmed properly to set the volume while in headphones mode. I know my audiologist had to program the volume on each mode separately on my device.
My MacBook Pro is able to play music over Bluetooth to my hearing aids fine. But I have never gotten Windows to work properly sending audio to my hearing aids. Do you have a Mac with Bluetooth? Try to get that working to see if it's your hearing aid device that's causing the trouble or not.

IPhone Bluetooth Headset Not Working Now

My Bluetooth Headset was working fine last night. I charged in completely over night, and when I went to use it on my handy dandy iPhone 3G, I could not hear anything. It showed on my phone as connected and I could hear the beeping when I pressed the button on the Bluetooth, but I could not hear the other person talking! My phone has the current update, 2.2.1, and I have never had this issue before!
If someone could please help me, I would greatly appreciate it!

You should try restoring your iPhone through iTunes. I hear restoring has helped in such situations. Please report back with any news.

Open Browser Window - Not working correctly.

I click the thumbnail on my homepage, I get a larger image in
a new window. Unfortunately, the homepage also redirects itself to
the larger image. You can see this at www.real9.com
I want the homepage to stay where it is, but the larger
window to open in a new window. I used the Open Browser window in
Dreamweaver to set this link up, but its not doing what I want it
too.
Help would be much appreciated, I have been trying to fix
this problem, but no success.
Thank you.

On Sun, 08 Apr 2007 21:01:21 +0100, djinn
<[email protected]> wrote:
>In the link fields for rather than linking to the file or
image - enter
>this........
>
>javascript:;
That's one way of handling it. My own preference is to leave
the link in
there and add a return false after the onclick handler. That
way the
link will still work if JavaScript is not available.
To implement that, your onclick for the link looks like this:
onclick="MM_openBrWindow('pics/inside_large.jpg','LargePicture','width=640,height=480')"
Change it to:
onclick="MM_openBrWindow('pics/inside_large.jpg','LargePicture','width=640,height=480');re turn
false"
Careful of word wrap. It's all on one line.
Gary

Bluetooth headphones not working correctly

i have the motorola s805 dj headphones, i have synced them and it worked, however i can not listen to music through the headphones, only the phone works, any suggestions?

This option is not avail yet as it will require a driver for the headset from the iPod section on the phone. I'm sure this will come out real soon, I found this out the hardway, plus the Apple Rep said this would work. I just bought a pair too, to find out they were all wrong.

IPhone 5 speaker not working correctly

My iPhone 5 speaker works, and it doesn't if it gets turned up too loud, or my phone rings for a call, it's like it's too loud and the speaker stops working until I blow into the speaker. This doesn't always work either and requires acouple tries. Can someone please help? I don't want to send it in

There is a known problem with the original speaker module installed in the Iphone5. If you experience crackling, static, or no sound at all from your phone and you've checked to make sure the volume is on, then it's likely an issue with the speaker module. Apple will replace the phone or module for free for a year from the date of purchase but MAKE SURE YOU MAKE AN APPOINTMENT with the Genius bar, don't just show up, they only do repairs or exchanges if you have an appointment. You can make one on line. WARNING - if you purchased your Iphone5 from Verizon or another carrier and they are willing to exchange it make sure you don't get a refurbished phone because it's likely to have a defective original module in it too. Make sure you get a NEW, recently manufactured Iphone5 with the new generation speaker module. I went through three phones before I went to Apple instead of Verizon and got it replaced. if they have a new speaker module in the Apple Store, they can just put a new module in your phone on the spot and you're good to go. If they don't have one in stock, they just give you a new phone.

Bluetooth does not work correctly with Flash when dealing with audio

I have a stereo that uses bluetooth. I am on a Mac.
Everything works with bluetooth (iTunes, Quicktime) except flash.
When I play a flash video, or listen to songs using a flash player,
no sound is playing through the remote (bluetooth) speakers.

Ditto - I get the same issue with a bluetooth headset. If I
download the flash video to my mac and play it using VLC it works
fine, however the flash player chokes on it. Any ideas?

Bluetooth is not working in Iphone 4s

I am using Iphone 4s. Bluetooth is not working. it is not identifiying or identified by other phones / Laptop

That is correct. This has never been a feature of iphone/ipod/ipad.
Bluetooth is supported for stereo headsets/speakers, telephone handsfree devices/headsets, some keyboards, some peer-to-peer apps form the app store and internet tethering where provided by the carrier.
Other than this it will not connect to any other phones/computers/devices

Bluetooth is not working in my iphone 4

bluetooth is not working
in my iphone4

The solution that worked for me was to Backup and then Restore.
For the backup: you can do it via iTunes (plug the iPhone and right click over its icon on the Devices section and then choose Back Up) or download your photos, contacts and other important documents to your Mac using iPhoto (just download your photos) or apps like My Contacts Back Up (it will email you the full list so you can upload it to the iPhone later). Make sure you backup properly please!
After you have done the back up choose Restore in iTunes and that will erase all the files and apps from the iPhone so it will be back to the settings it had on the day you used it for the first time (you'll be able to recover all the apps you paid for since they'll be linked to the Apple ID you used to purchase them).
The iPhone will still have the latest version of iOS (6.1.3) so if the problem is -like in most cases- software related it would be fixed and you'll able to pair the device again. If not maybe you will have to downgrade the iOS to the previous version.
Hope this helps!

I updated my iphone 4S to 7.1.1 and now WIFI and Bluetooth do not work.

I updated my iphone 4S to 7.1.1. Immediately after doing this, my wifi is greyed out, (cannot even turn it on), and my bluetooth is not working at all. I have discussed with Apple several times and even went to an apple service center. They claim that I have a HW issue and that I must pay $200 for another phone. HAving been a cell phone HW designer for 15 years, I know this is not true. If this is a HW issue, it was caused by the FW update. There is a problem with my phone that is a direct result of the FW update. If I could go back to the previous version, I could prove it but there is no way for me to do that. So, it looks like iphone has released an update that "breaks" some phones. What an easy way to force people to pay them $200 for a new phone. Hmmm, if other electronic manufacturers catch on to this, we are screwed. Apple has seen the issues on the internet and has seen the issues reported on thier own Communities. They know that many people are reporting the same problem. If I can look it up, anyone can. They know that they have screwed up. So instead of biting the bullet and fixing what they broke, (peoples phones), they are taking advantage of the opportunity to make more money by telling people that they have a HW problem that they are not responsible for and that it is going to cost $200 to fix what Apple has screwed up. Just let me go back to the previous version of the IOS and my phone will work again. Is anyone else having this same issue? Has Apple lost it? I have been more than pleased with my phone. I have been thrilled with customer support. What is going on with apple? Samsung is looking better every minute.

Even if it is a hardware problem they should fix it regardless of warranty. If you buy a car and after 1.5 years the doors fall off due to a failure in their design and construction, do you think the car manufacturer could pull off what Apple is trying to do? Yes the car still delivers its primary objective of driving from A to B, but significant functionality has been lost due to their fault.
It is the same with this iPhone wifi problem. Apple are a disgrace, I have had significant Apple Hardware failures with my MacBook Pro and iPhone within 2 years of purchase. Pathetic quality.

Bluetooth is not working with Windows 8.1 on U410 touch

Hello,
I have a Lenovo U410 touch, and i just upgraded to windows 8.1 though the store.
And the bluetooth is not working at all, it says that the PC is searching for Bluetooth devices. While everything was working great before.
I have updated all the drivers from the Lenovo websites and still nothing is working
I went to device manager and checked under bluetooth: Intel (R) Centrino Wireless Bluettoth 4.0 + High Speed. Microsoft Bluettoth Enumator, Microsoft Bluetooth LE enumarator all 3 are up to date.
Then I went to network connections (from the start) and i have a red cross under Bluettoth network connection 2 and says not connected.
My windows is also up to date
I really think gooing back to Windows 8 since i cannot listen to my music on my beatbox and connect to my phone and tablet,
Thank you for your help

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

HT204387 I have brought a iPhone 5s and installed software but my bluetooth is not working. Please help me

I have brought a iPhone 5s and installed software but my bluetooth is not working. Please help me

What are you trying to connect the iPhone to and what is happening when you try?

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

Need help iPhone 5 not working correctly

my iPhone 5 keeps pressing all the keys around the key I want it to press on the keyboard also problems using lock screen numbers have re-started and the phone just reverts to not working correctly
also when I got this phone I did it from a back up of my old iPhone 4 but not all the songs have fully downloaded (they are there, but cannot play) when I look on iTunes it says I have no songs that arn't on my iPhone that I've bought?
Should I take my phone back to my carrier which is 3? Or make an appointment at the Genius Bar?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Backups do not contain media, all the media should be in iTunes on your computer. Simply select the content desired to sync to the device and sync.

IPhone bluetooth Windows 7 not working correctly.

Similar Messages

Maybe you are looking for