IPhone case has still not arrived after months of waiting

My free iPhone case has still not arrived after months of waiting. Has anyone gotten their free case yet?

I have the same problem, so have many others.
http://discussions.apple.com/thread.jspa?threadID=2635350&tstart=0
There was no record of my order. I spent over an hour on two calls to Apple, and they refused to send me the Griffin Motif that I originally ordered. The rep. I spoke to said to be patient, it just might show up, but at this point I doubt it.

Similar Messages

  • Iphone 4s camera still not working after replacing and restore?

    I bought phone with back camera not working so first i done a restore and update to no avail, then done a restore as new phone still no joy, so i decided to buy new camera which i fitted no problems but its still not working? what else can i do as there is no warranty on the phone?

    Find a third-party repair shop with experience in fixing iPhone cameras. Apple won't help you.
    Be aware, since Apple does not sell iPhone parts, there is no legitimate source for such, & many on the market are counterfeit.

  • HT1414 Volume has gone on iPhone 5 . Still not working after restore. Any ideas?

    Volume on iPhone has gone. No music,calls etc . Help please

    Check everything in this article:
    http://support.apple.com/kb/TS1630
    If that's done, and HT1414 is done, it's a hardware issue.

  • HT1541 the email informing the giftee that album has been sent has not arrived after many resends. Email address is fine. Have even tried a second email address and still no joy!!!

    the email informing the giftee that album has been sent has not arrived after many resends. Email address is fine. Have even tried a second email address and still no joy!!!
    Anyone out there with any ideas?

    Your dad should go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • HT201401 After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

    After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

    After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

  • I have recently updated m iPhone 4 which was not used since months. It has to be updated from5.1.4 to iOS 7.0.4 and it has taken more than 15 hours to get started. Plz help me. It took about 5 to 6 hrs to prepare for updating.

    I have recently updated m iPhone 4 which was not used since months. It has to be updated from5.1.4 to iOS 7.0.4 and it has taken more than 15 hours to get started. Plz help me. It took about 5 to 6 hrs to prepare for updating.

    I am having this problem.  At first with the new iPhone 5, and then with the iPad 2.  I am not sure why this is happening. 
    My gut feeling is this is an iO6 issue and here's why -
    The problem mainly occurs with apps.  I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them.  The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
    Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage.  It required me to restore the iPad 2 from backup.  With this restore the same issues occurred - putting the apps back on the iPad would hang up.  The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
    My solution has been to soft reset the device, restart Windows, and continue the process until it's complete.  This is remarkably inefficient and time-intensive but everything works with patience.
    I have been wondering if others have had these same problems. 

  • I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

    I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

    Here's basic troubleshooting for iOS:
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/troublesh ooting-ios
    (Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple)

  • Wifi of my iphone 4s has grayed out within 3 months of my purchase..I have now got a replacement from Apple

    Wifi of my iphone 4s has grayed out within 3 months of my purchase..I have now got a replacement from Apple but unfortunately it worked for only 1 day and the wifi got grayed out again...I tried resetting all my settings but all in vain. How many times have i to replace my iphone..Has Apple not thought of solving the wifi issues from the core. I have heard many users are having this problem. Why hasn't Apple taken any step to improve and solve this issue. After buying such a high end product, this is what u get???  Most of the Apple users are now shifting to Samsung phones..I was a great fan of Apple and have been using all apple products but this has really disheartened me..Apple please wake up!!!
    iPhone 4S, iOS 6.1.4 
    I have this question too (0) 
    Reply
    Tags: none (add)

    Read http://support.apple.com/kb/ts1559

  • B110a black in still not working after trying all recommended solutions

    Hi there
    Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

    The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a.  Be sure to check the vents as shown in solution six, step three.  If the above does not resolve the problem the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Recovery still not possible after 6760 attempts due to ORABPEL-11001

    Version 10.1.3.1.0
    Hi,
    We have two BPELs which keep filling up the domain log with the line in the heading:
    Recovery still not possible after 6760 attempts due to ORABPEL-11001...
    I believe we have fixed any possible input directory issues but the error message continues to be written.
    I expect that redeploying (rebooting server?) should end the messages but, either way:
    Do you know if there is a setting on either the BPEL development process (jDev) or the SOA server where I can limit the number of attempts?
    Thank you,
    AG
    Log lines below:
    ~~~~~~~~~~~~~~~
    <2008-09-24 07:24:51,486> <INFO> <usareg.collaxa.cube.activation> <File Adapter:
    :Inbound> Recovery still not possible after 6760 attempts due to ORABPEL-11001
    Invalid Input Directory.
    The value specified for the input (Physical/Logical)Directory activation parameter has an invalid value "${Such-and-Such_A.input.dir}"
    Ensure that the following conditions are satisfied for the input directory :
    1) It exists and is a directory (not a file). and
    2) It is readable (file read permissions). and
    3) If activation parameter "DeleteFile" is set to "true" then the directory should also have granted write permissions. and
    4) If using a logical name, then ensure that the mapping from logical name<->physical directory is correctly specified in the deployment descriptor.
    <2008-09-24 07:25:11,485> <INFO> <usareg.collaxa.cube.activation> <File Adapter:
    :Inbound> Recovery still not possible after 3480 attempts due to ORABPEL-11001
    Invalid Input Directory.
    The value specified for the input (Physical/Logical)Directory activation parameter has an invalid value "${Such-and-such_B.input.dir}"
    Ensure that the following conditions are satisfied for the input directory :
    1) It exists and is a directory (not a file). and
    2) It is readable (file read permissions). and
    3) If activation parameter "DeleteFile" is set to "true" then the directory should also have granted write permissions. and

    We are running on Unix.
    The BPELs were deployed before the respective in-/output directories had been created. I think this might have caused the initial problem.
    Once the directories were created (with full permissions -777), though, the messages continued.
    I checked the descriptors on the deployed bpels and they seem to be pointing to the correct absolute path for the input files.
    So, ASSUMING that the paths are now correct and permissions are ok:
    Is there any way of making the attempts stop (as in "kill -9 annoying_bpel_process" ;) ?, or,
    Is there a setting in the server admin side to limit the number of attempts in the future ?, or,
    Do we need to redeploy the same Bpel after we created the directories ?
    Thank you for your help.

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • My iPhone 4 has become dead slow after the iOS upgrade. Any pointers pls?

    Hello All,
    My iPhone 4 has become dead slow after the iOS upgrade. I use the phone for business purpose and it has become painful to use the phone becuase of the poor performance.
    I don't want to change phones based on iOS releases. Any suggestions would be appreciated.
    Thanks,
    Amrit

    How to update my iPhone4,iOS 7.0.6

  • Why iCal cancel of event edits issue is still not fixed after over 2 years?

    Why iCal "cancel of event edits" issue is still not fixed after over 2 years?
    I have been in the software engineering industry for over 14 years, but I have never seen a large corporation being so slow at addressing major issues like these.
    What would it take for Apple to start working on this issue?

    Yup. This is fully ridiculous that you can't cancel your updates once you start. I love the tool but this is on pretty significant issue.
    Sometimes I accidentally move a mtg or make some edit while viewing and you can't back you!!
    If you feel the same way, you should post a note here:
    http://www.apple.com/feedback/ical.html
    Message was edited by: SteveMc10123

  • TS1538 Still not connecting after all these steps were done, what is the solution?

    Still not connecting after all these steps were done, what is the solution?

    Tried a different cable, this cable will now charge the ipod, but will not be recognized by the computer as even being a drive.
    haven't tried a different computer because I really don't want itunes instaled on it.

Maybe you are looking for

  • AdobePSL.dll Crash

    One of our laptops keep crashing indesign and illustrator all the time on windows 8. Viallisen sovelluksen nimi: InDesign.exe, versio: 9.2.2.103, aikaleima: 0x537279c1 Viallisen moduulin nimi: AdobePSL.dll, versio: 14.0.0.31988, aikaleima: 0x5272de8e

  • Printing outlines: text all on left side of page

    I'm using Keynote 3, and having problems with printing outlines. All of the text is squished onto the left side of the page as if the page were laid out with columns. What should be 4 pages of outline (as it was in Keynote 2), is now about 10 pages,

  • Its 2014, why can I not get the intro media to auto play?

    I cannot get the the intro media to play when either going to that page or even opening the iBook. Any help would be greatly appreciated.

  • "Please contact itunes support to complete this transaction" how to fix

    "Please contact itunes support to complete this transaction"

  • SubscriberList from a jmxTopic

    Hello, is there anyway to get a list of subscribers from a JMX-topic (from within a Server-class)? If I look in the JMX-MBean-view I can see the info I want (AllSubscriptionsCount-attribute and the listAllSubscriptions()-operation) I already have the