IPhone does not ring after upgrade

After applying the most recent software upgrade my phone no longer rings.
The alarm works fine.  I checked Sounds and it is on, volume is up
and a tone is set.  What happened?  Anyone else experience this?

Double check that you don't have DND turned on - settings - DND - off.

Similar Messages

  • My iPhone does not ring after 8.2 upgrade and sound gone on iPad

    the sound as gone on my iPad and the iPhone does not ring when i get a call all after the 8.2 upgrade

    Hi pr1uk,
    It appears your devices are experiencing audio issues. The following article provides steps which may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • IPhone 5 does not ring after upgrade to iOS 7.0.4? HELP!!!

    I upgraded to iOS 7.0.4 and my iPhone phone stopped ringing and many, but not all speaker functions stopped working. I have tried everything including Reset to Factory Settings. Earbuds work. Help!!!

    Solution found: iphone 5, iOS 7.0.6
    Settings > General > Restrictions > (enter passcode) > ...scroll down to "privacy" section and select Microphone > Tick "Allow Changes"
    Then open Skype App, and it will request access to the Microphone > Allow
    Note, on this screen you have the option to disable all restrictions, or Allow (un-restrict) only specified Apps (e.g. Siri).
    Hope this helps.

  • My iphone does not respond after upgrading the operating system

    upgrade the operating system to 7.0.2 and iphone 5 will not start, can you help please

    It reads as though you've managed to break your iPhone.  You should make an appointment with an Apple Genius to discuss.  If need be, Apple will sell you a refurbished handset for about $200 + tax.

  • I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    Without more information, I have to say it sounds like the phone you have was not legitimately unlocked, but had been hacked. Updating iOS will re-lock it to the original carrier.
    ONLY the carrier it is locked to can authorize unlocking it.
    Where did you get the phone?

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

    I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    iOS 6 changed how that feature works.

  • HP P1006 DOES NOT PRINT after upgrading to a Macbook Pro 15 i7

    HP P1006 does not work after upgrading to a Macbook Pro 15 i7 2,6 with Mac OS 10.6.3
    I have used Time Machine to migrate from my previous MBP 15 C2D.
    I've tried to remove the printer in system pref. and install it again.
    The installer works fine but close to the end of the installation a new app is starting: HP Laserjet Firmware Update Utility, which won't start and just stays jumping at the dock, although the HP Installer succeeds to finish installing.
    So when i try to print, the printer stays idle.
    I have tried to download the installer from HP official website. Same story.
    Also tried to do Permission Repair in Disk Utility
    Please, if anyone knows a solution, help!

    After the 4th try of Installing the software it finally worked!
    Thanks anyway!

  • Why is my iPhone 4 not ringing after iOs7 update?

    Why is my iPhone 4 not ringing after iOs7 update?
    I checked volume on side & n settings & rebooted

    Hello there Tgurnell
    Thank you for using Apple Support Communities.
    It sounds like the ringer is not ringing after the update to iOS 7.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Sterling

  • Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

    Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

    iPhone: No sound or distorted sound from speaker

  • Phone does not ring after using Bluetooth

    I have an iPhone 5 with IOS 8.1.  My phone does not ring or notify me of incoming texts.  This happens after I connect to Bluetooth.  If I reselect my ringtone, the phone works, until the next time I use Bluetooth.  It seems like a bug in a recent update.

    I had same issue. My phone will not ring or get text sounds when locked. This morning my alarm did not make a sound neither. Thanks to my dog who woke me up. My "do not disturb" was on. It's the moon on your quick menu. I wish the phone will let you know the "do not disturb" is on when you hit the home button to use the phone. I was not aware of this feature on my quick menu.

  • Itunes does no play and music line does not progress after upgrade

    itunes does no play and music line does not progress after i upgraded my itunes to 11 version

    The same thing for me and I've tried EVERYTHING. Someone please help!?!?!

  • HT201401 my Iphone does not ring or vibrate. How do I fix this problem?

    Hello Apple fam, I am having problems with my Iphone 3gs. My phone does not ring or vibrate and I don't know what the issue is with it. I love my phone and to ate to replace it with anything esle so please can someone help me resolve this problem the I am having with my phone. Thank you all and have a good day!

    You might need to UPDATE the DRIVER for your iPhone in DEVICE MANAGER.
    I searched quite a few Blogs and the answer below fixed my issue:
    Windows 7 incorrectly identifies the device as a Digital Camera.
    To fix this:
    - Plug in your iPhone  (don’t have iTunes loaded at this time)
    - Go to Device Manager (Click Start, right-click Computer, then click Properties. In the window that appears choose “Device Manager” on the left)
    - Scroll down and find “Apple iPod” or “Apple iPhone”
    It will likely be under the “Portable Devices” category.
    - Right-click the Apple device and choose “Update Driver Software…”
    - Choose “Browse my computer for driver software” in the window that appears
    - It will ask you for a location; you want to Browse to this folder (location is the same in 32 and 64 bit Windows):
    32-bit and 64-bit: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    - Click Next
    - It should find the driver for your device; let it install that driver 
    Once you complete these steps, reboot your computer. Once you reboot everything should work exactly as expected!

  • Iphone does not activate after update

    My Iphone 3 does not activate after last update. What can I do? The system does not let me pass the activation process so it is totally useless now.

    There are a number of things:
    1. iPhone 3G cannot update to 6.1.2 the highest IOS is 4.2.1.
    2. This is a sign that your iPhone was hacked or jailbroken.

  • IPhone 3G - 3G Does not work after upgrading to 4.2.1

    Once again Apple has screwed something up. Upgraded to 4.2.1 on Friday and now my 3G reception does not work. I've factory restored and still no good. Whats up with the quality control these days? Seems as if every software update across iOS and Mac OS/X has at least 1 major flaw.
    Does Apple read these posts?

    my problem is more curious i use 4.2.1. on a 3g iphone which is "open" from italy
    my network is kpn/simyo
    4.2 everything worked... no tethering offered
    4.2.1. most apps including safari weather etc are not able to use the data network,but the NS dutch railways app is able to use the data connection
    and suddenly i get offered tethering in the network settings
    But the screen for manually set your network settings is disappaered, so as my provider cant send setup files to my phone makes it impossible to manually setup a phone network, which is strange for an "open" never been locked iphone
    Will see what happens the next day as there are more buggs reported about network and 4.2.1.
    WIFI works perfectly....
    Was planning to buy an iphone 4 but if apple cant guarantee the use of what you buy..... by issuing software with flaws..... If they would just offer a downgrade option for software..

Maybe you are looking for