[iPhone] How to kill UIAlertView programmatically?

My app is activating a UIAlertView upon disconnection from a server. If the connection is resumed without any user interference, I want my app to kill the UIAlertView so as not to annoy the user in case of a spotty connection by making them repeatedly have to manually dismiss the alerts. I haven't found in the documentation any reference to a forced cancellation of a UIAlertView except possibly a cancellation by the system in case the user presses the home button. I managed to make the alert view disappear by sending it a removeFromSuperview message, but it still has a retain count of 1 so obviously is being retained by some system element, which will cause a memory leak. Can anyone suggest how I might simulate a user dismissal of the alert view or otherwise cancel the alert in a safe way? I thought of sending the alert view simulated "touchesBegan" and "touchesEnded" messages to make it think the user dismissed the alert, but this would be a very annoying and possibly not foolproof way of doing it. Any suggestions?

Thanks - I feel so stupid! I (mis)understood the "dismissWithClickedButton" thing to mean that you are configuring the UIAlertView to be dismissed by the user clicking the button with that index, but in retrospect it's so obvious this is not what was meant, I don't see how it didn't occur to me. Oh well, it happens I guess...

Similar Messages

Cant sync my iphone contacts with yahoo, it says "unknown error (4)" and tells me to come back later, been doing it for months. Any ideas on how to kill it?

cant sync my iphone contacts with yahoo, it says "unknown error (4)" and tells me to come back later, been doing it for months. Any ideas on how to kill it?

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

How can I know programmatically from my app, safari or any other browser application browse which url on iPhone?

How can I know programmatically from my app that safari Native application or other browser application currently hit which URL.I want to know Currently which URL hit on browser in my app (in Background / Foreground).
Please give me your valuable responce.
Thanks in advance.

Not possible.

How to kill a Thread?

Hello,
My question is simple how to kill a thread.
The background is a call to a method in a third party API, crawler4j, that locks the entire program.
The design of crawler4j is "You should stop it when you think it's enough (ctrl+c)" but as I use it only as a step in a larger program I want to stop it programmatically and not by "ctrl+c" as they have designed the API.
This is the locking callcontroller.start(MyCrawler.class, numberOfCrawlers);So I made a thread public class MyCrawlController extends Thread {
public void run(){
controller.start(MyCrawler.class, numberOfCrawlers);
}And in my main method
MyCrawlController mCC = new MyCrawlController();
mCC.start();
Thread.sleep(180000);
//Here I want to kill the mCC and all it's threadsOne problem is that my program never terminates. Probably due too the JVM not realizing that I don't want it to count mCC and it's spawned threads as alive. Any idea on how to solve this. For now I can only exit the program with System.exit(0); and I don't want that. So I need a way to stop the mCC's threads and get the JVM not to count them. Any idea on how to solve this. Even better if they can be taken by the GC.

Farmor wrote:
Thanks for the answer.
I came to think about daemons and solved the problem with mCC.setDaemon(true);Really stupid that one has to do several programs and tie them together only to kill a thread.
As I only do this for other learning purposes and won't use this code or program after this week I will modify crawler4j, open source, and make myself a custom good method that will terminate itself and return to the main method properly.There are some fairly difficult problems with a number of aspects of concurrency if you forcibly stop threads, which is why Thread.stop() and related methods have long been deprecated.
It's a pity that Java can't respond to kill signals (like Ctrl-C) in a tidy way. I think they're all tied up with some of the JVMs internal processes.
In general people wind up using sockets instead of signals.

Transaction logs caused by iPhone User is killing the space

User's iphone 5S is killing the transaction logs on the Exchange server. Does anyone know how to resolve this issue? User does receive a lot of mail by the way, has an enormous inbox (well over 3.5GB). I'm sure there are also lots of Calendar
items.
What to do and how to stop the phone from going into an endless loop cycle? The only temporary relief I have is to either disable it or enforce a manual fetch. Another solution I thought of is to put the user into his own database and turn on
circular logging

Oh boy.. there has been so many issue . look like you are still on Sp1 or SP2. I'd strongly recommend you to upgrade it to SP3. Is it a single server?
You will need to plan the downtime for it..
Where Technology Meets Talent

I updated my iphone 4 and now i have no music on iphone, how do i transfer music from itunes to my iphone?

i update iphone 4 and now i have no music on my iphone, how do i tranfer music from itunes to my iphone?

Connect to iTunes via USB cable and reselect your music you want to sync.

I backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

Don't you just love changes in interfaces?
I found the answer to my question.
When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer.

HT1848 when i purchase ringtones and they download directly to the music app on iphone, how can I move them to SOUNDS in SETTINGS so I can assign to various functions please?

when i purchase ringtones and they download directly to the music app on iphone, how can I move them to SOUNDS in SETTINGS so I can assign to various functions please?

You would have to create the ringtones.
Google will find several way to do this.
You cannot buy ready made ringtones from your computer.

How do I apply programmatic skins for completely custom drawn components of a Flex library project?

Hello folks,
I am looking for best practices advice when (1) creating
custom components and (2) styling and skinning.
I already know how to skin a component part of the Flex
framework. I can make a class extending ProgrammaticSkin and have
my component skinned using CSS to link the component with the
reference to my custom class.
However what about those cases when you are completely
creating a component from scratch?
Imagine a "Freehand Drawing Canvas" component that allows the
user to draw on it and has some buttons to set color styles, line
styles, etc., or imagine a "Screen Flow Gallery" component that
displays visual objects in a fashion similar to Cover Flow in the
Mac.
In many components I am aware you may reuse other components
part of the Flex framework but I am trying to picture an scenario
where you would need to draw everything yourself because there just
isn't something to base it upon so you will end up drawing it from
scratch.
To learn how instead of building one of those components I
mentioned previously I decided to start with something simple that
would illustrate this like a LiteButton component that will behave
just like the Flex mx.controls.Button but will extend UIComponent
and be completely custom drawn.
The component will have a default look and will also be
style-able and skin-able. I will provide styles for users of the
component to modify and regarding skinning anyone can create a
custom ProgrammaticSkin adding its own drawing logic and link it to
the component via CSS with the ClassReference applied to the skin
selector.
So far so good and it's clear what I want to achieve. I
actually know how to do most of the stuff here but I have one
single problem.
Here is my question, where should I put my custom drawing
logic? If I do it in the updateDisplayList inside the class
extending UIComponent it works, however I thought that it would be
a better practice to do it using programmatic skins, that way I
could provide different skin themes for my component set.
The problem is that I can't make the programmatic work in
this scenario. I tried instantiating the custom programmatic skin
during the updateDisplayList of the LiteButton component and adding
it to my display object via addChild but that didn't do anything. I
also tried creating a "default.css" stylesheet and tried to use
ClassReference as I would normally do to skin an already existing
component (or composite component as well) but that didn't do
anything either.
So how do I apply programmatic skins for completely custom
drawn components of my Flex library project?
I could do it inside the updateDisplayList of the LiteButton
class extending UIComponent but again I would like to provide
different theme sets for my components so it makes sense using
programmatic skins.

"jbucaran" <[email protected]> wrote in
message
news:[email protected]...
> Hello folks,
>
> I am looking for best practices advice when (1) creating
custom components
> and
> (2) styling and skinning.
>
> I already know how to skin a component part of the Flex
framework. I can
> make
> a class extending ProgrammaticSkin and have my component
skinned using CSS
> to
> link the component with the reference to my custom
class.
>
> However what about those cases when you are completely
creating a
> component
> from scratch?
>
> Imagine a "Freehand Drawing Canvas" component that
allows the user to draw
> on
> it and has some buttons to set color styles, line
styles, etc., or imagine
> a
> "Screen Flow Gallery" component that displays visual
objects in a fashion
> similar to Cover Flow in the Mac.
>
> In many components I am aware you may reuse other
components part of the
> Flex
> framework but I am trying to picture an scenario where
you would need to
> draw
> everything yourself because there just isn't something
to base it upon so
> you
> will end up drawing it from scratch.
This may help with that
http://livedocs.adobe.com/flex/3/html/help.html?content=skinstyle_3.html
> To learn how instead of building one of those components
I mentioned
> previously I decided to start with something simple that
would illustrate
> this
> like a LiteButton component that will behave just like
the Flex
> mx.controls.Button but will extend UIComponent and be
completely custom
> drawn.
>
> The component will have a default look and will also be
style-able and
> skin-able. I will provide styles for users of the
component to modify and
> regarding skinning anyone can create a custom
ProgrammaticSkin adding its
> own
> drawing logic and link it to the component via CSS with
the ClassReference
> applied to the skin selector.
>
> So far so good and it's clear what I want to achieve.
Actually after
> playing
> with the weekend and today I know how to do most of the
stuff but I have
> one
> single problem. So here is my question, where should I
provide my custom
> drawing logic? If I do it in the updateDisplayList
inside the class
> extending
> UIComponent it works, however I thought that it would be
a better practice
> to
> do it using programmatic skins, that way I could provide
different skin
> themes
> for my component set.
These aren't mutually exclusive. When you provide a skin with
a
TypeSelector, you have to add it to the display list
somewhere, and this is
typically done in updateDisplayList or addChildren. I prefer
to do it in
updateDisplayList, because you can then change it if the
style changes.
> The problem is that I can't make the programmatic work
in this scenario. I
> tried instantiating the custom programmatic skin during
the
> updateDisplayList
> of the LiteButton component and adding it to my display
object via
> addChild but
> that didn't do anything.
Exactly what did you do?
> I also tried creating a "default.css" stylesheet and
> tried to use ClassReference as I would normally do to
skin an already
> existing
> component (or composite component as well) but that
didn't do anything
> either.
I've never had any problem using an approach similar to
this...but I will
say that I couldn't see any advantage in creating a
default.css style sheet,
since it's not really default in the way that the one that
comes with Flex
is. It's much more obvious to anyone using your component
what's going on
there if you create a style sheet where they're likely to
spot it.
> So how do I apply programmatic skins with the default
look for custom
> drawn
> components?
It seems like your approach is fine, but maybe you've made a
mistake in your
implementation.
> I could do it inside the updateDisplayList of the
LiteButton class
> extending
> UIComponent but again I would like to provide different
theme sets for my
> components so it makes sense using programmatic skins.
You might want to consider also adding an instance of
HaloBorder to your
component. That brings a lot of functionality with it.
HTH;
Amy

I HAVE AN OLD 3G IPHONE , HOW DO I USE IT IN ANOTHER COUNTRY WITH A NEW SIM CARD

I HAVE AN OLD 3G IPHONE , HOW DO I USE IT IN ANOTHER COUNTRY WITH A NEW SIM CARD ?

it has to be unlocked by your carrier. give them a call

I have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.

How to kill Active Data Request in DSO

Hi all,
I have 2 dsos ( A, B). Data loads from A to B.
Now I have deleted data from DSO B by using option delete data ( did killed one running request by turing the status to RED).
when I try to load data again to DSO B, it is not allowing me to execute the DTP.
Message is Request 257.617 is stil processing.
I am SAP BI 7.0 environment.
Please suggest how to kill active request ( I am not seeing it RSMO/SM37).
I tried to use Zombie Request FM, it didnt worked.
Thanks All,
Jason

Srinivas,
Thanks for the reply.
When I go RSRQ
I can see the request , the exception it is showing is CX_RS_FAILED logged.
SM51, when try to kill the process it says
SAP System Message:
Work Process restarted; session terminated
Apologies for earlier post messages saying that I did nt saw the message in RSMO, I can see it is in yellow process.
Please suggest how to kill the processes .
Apperciate your response..
Thank you
Jason

HT4236 If I want to delete the photo library from my iPhone, how do I make sure I dont delete them from my desktop as well?

If I want to delete the photo library from my iPhone, how do I make sure I dont delete them from my desktop as well?

If you have copied them to your computer, then you will be OK. Just deselect the photos when you sync.

How to kill a job in SM37

hi All,
can someone wxplain me how to kill a job in SM37 which is delaed by 10,000 secs.
cheers

Hi Rase,
goto SM37 and click on the active selection and enter the jobname and then click excute the particulr job should appear highlight the jobname then click on the stop iconthat appears on the taskbar( 3 rd from left)
or goto SM50 Click on the process and select process->stop without core
or
set a running infopack of the chain (in RSMO) to red, thats will stop the chain (if there are no parallels, else set all parallels to red).
****Assign Points If Helpful****
Regards,
Ravikanth

I have different apple ids for my ipad and iphone - how do i sync so that the apps appear on both devices, e.g errands

I have different apple ids for my ipad and iphone - how do i sync so that the apps appear on both devices, e.g errands

If both accounts are authorised on the computer's iTunes that you sync them to, and the relevant apps are on that computer, then you should be able to sync them to both devices. The apps will be tied to the account that originally bought/downloaded them, so only that account will be able to download updates to them.
If you log into the other account on a device and re-download its apps onto them then you risk tying the device to that account for 90 days (and similarly redownloading on a computer's iTunes) : http://support.apple.com/kb/HT4627

[iPhone] How to kill UIAlertView programmatically?

Similar Messages

Maybe you are looking for