[iphone] Problem updating location with CLLocationManager

Hi,
I´m using the method startUpdatingLocation for months, but now it´s stopped working. In the simulator it runs well, but in the device I get the following message in debugger console when trying to call startUpdatingLocation:
*247605440.018,CLClientRegister: could not send registration request to daemon - result = -1*
Does anyone knoe how to fix this problem?
thanks,
Pitteri

that's not a fix, that's a workaround. Anyone else found a solution to this? essentially the daemon is dead, and remains dead across reboots - very nasty...

Similar Messages

  • Problem Updating iTunes with Windows Vista

    I downloaded iTunesSetup.exe and ran as an Admin and during the installation I get an error message that says "Could not access network location %APPDATA%\."
    What does this mean and how do I fix it?

    Apple, apparently, had a fix up for an earlier version of itunes, but that is gone from the web page, and has been yanked.
    Yes, there are big problems with iTunes for Windows. Until these are rectified, your Ipod will be a paper weight.

  • Problem updating view with triggers

    I created a view with instead-of triggers for updating. When I try to update the view with an ADO 2.7 recordset I receive errormessages.
    rsAns.CursorLocation = adUseServer
    rsAns.Open "select * from callcenter.v_ans where kidno = 1534", adoConn, adOpenKeyset, adLockOptimistic
    rsAns.fields("Name").value = "Thomas"
    The last line creates the error:
    -2147217888
    Consumer's event handler called a non-reentrant method in the provider.
    When I try the same lines of code with...
    rsAns.CursorLocation = adUseClient
    I get:
    -2147217887
    Multiple-step operation generated errors. Check each status value.
    By the way, when using client side cursors with Microsoft's OLE DB for Oracle it works fine.
    Any ideas?

    I had the same problem but without triggers. I only changed some values in different records (always automatically commited) and after the third change I got this error message. At the same time I was connected with TOAD to the databse and there was no problem to change the data - so it doesn't look like a database problem.
    UPDATE "BLATABLE"."KEYS" SET "BLAVALUE" = "abcdef" WHERE ROWID = 'AAA2c1AADAAAHa5AAH' AND ORA_ROWSCN = '7738949481842'
    One error saving changes to table "BLATABLE"."KEYS":
    Row 6: ORA-01000: maximum open cursors exceeded

  • Updating location with a registered phone of a dif...

    Hi,
    I stay in Sherbrooke, QC but travel to New York sometimes. I have a skype North America subscription. I would like to use the Skype-To-Go facility to be able to call Canada from New York. However, when I try to update my location to New York in "Skype-to-go" page, it asks me for "Which phone will you call from?" and it expects me to input a New York number. If I try my Sherbrooke one, it refuses to proceed.
    Kindly tell me how to update my "Nearest location" to New York, when I only have phones registered in Canada.
    Thanks.

    If you are still getting blue screen crashes, make sure you've disabled Firefox's use of hardware graphics acceleration. With that feature off, it would be rare that Firefox would touch any privileged parts of Windows.
    You might test in Firefox's Safe Mode. That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?
    Oddly, that last crash report shows the Flash plugin still loading, even though you disabled it.
    This is some standard guidance that addresses the most common issues with the Flash player. I'm sure you've seen some of it before, but just in case:
    (1) Make sure all recorders/downloaders that interact with Flash media are as up-to-date as possible, or disable them.
    (2) Disable hardware graphics acceleration in Firefox and in Flash
    (A) ''As described above...'' In Firefox, un-check the box here and restart:
    orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
    (B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
    (3) Disable protected mode (Windows Vista/7/8)
    See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]

  • Problems updating panel with remove() and add()

    Hi,
    I have a class which extends JPanel, and everytime I call repaint on it I am trying to add the contents of a Hashtable to the screen. If I do not include the this.removeAll() then it will add those components to the Container...problem is that it will add them everytime so I will have multiple copies of the same thing. If I try and remove them first (notice how I put a boolean in so that I dont remove them before they are added) before adding them (so clear the screen), then they will never appear, no matter where I put the removeAll() or where i put the add(). Same applies for a remove() statement on each individual component.
    I have spent hours on this stupid thing !
    Any ideas would be much appreciated
    Cheers
    Ray
    public void paintComponent(Graphics g) {
         super.paintComponent(g);
         if (painted) {
         this.removeAll();
         globalClock.setRate((int)nodeRef.getAverageRate());
         painted = true;
         //Iterate over the keys in the map
        Iterator keyIt = nodeRef.returnKeyIterator();
        Iterator valIt = nodeRef.returnValueIterator();
       while (keyIt.hasNext()) {
             String key = (String)keyIt.next();
            NodeObject node = (NodeObject)valIt.next();
            nameLabel = new JLabel("Client Name");
            nameField = new JTextField(key);
            currentTimeLabel = new JLabel("CurrentTime");
             currentTimeField = new JTextField(Double.toString(node.getCurrentTime()));
             updateLabel = new JLabel("Update Interval");
             updateField = new JTextField(Integer.toString(node.getInterval())); //default
             speedLabel = new JLabel("Clock Rate");
             speedField = new JTextField(Double.toString(node.getRate()));
             add(currentTimeLabel);
             add(currentTimeField);
             add(updateLabel);
             add(updateField);
             add(speedLabel);
             add(speedField);
            add(nameLabel);
             add(nameField);
        globalRateLabel = new JLabel("Global Speed");
        globalRateField = new JTextField(globalClock.getRate() + " %");
        globalRateField.setEditable(false);
        add(globalRateLabel);
        add(globalRateField);
    }

    Sometimes I will have two things in the hashTable, sometimes I will have one hundred !
    Each time repaint() is called I want this to represent the current status of the Hashtable, so If on one repaint there are 100 pairs in the Hashtable it will add all the details of these pairs to the Container, however on the next repaint if there are only two pairs I dont want the other 98 entries on the page at all. You cant do this with just a component modifier, you have to remove the component completely. I figured that the easiest way to do this would be just to remove all the components completely, and then add what was needed by going through the Hashtable again. (note:effiecency is not a concern)
    And yes I realise repaint() is called on resizes etc etc, but this wont adversely affect the program
    Ray

  • Problem updating RH8 with Windows 7

    I've been using RH8 with XP, but I got a new Windows 7 machine last week so I had to do a fresh install of RH8. I got through the install with no problems and the un-updated version of RH seems to work OK, but I need to apply both the 8.0.1 and 8.0.2 updates.
    I attempted to run the install for 8.0.1 from the Adobe installer and though it seemed to go too fast, I received a message that the install was finished. However, when I tried to install 8.0.2, it said that I had to install 8.0.1 first, so apparently that install hadn't worked after all.
    I downloaded 8.0.1 directly from the Adobe support center and tried to install it that way, but it dies directly after choosing the install language (English). I've restarted several times, restored the computer to a point before my first attempt in hopes of getting a clean try, etc. All to no avail.
    I typically use RoboHelp HTML and the unpatched version is working, but I really need the 8.0.2 patch because I'm concerned about the integrity of the links and folders as the project grows. I'm at my wits end as far as what to do next (reinstall the whole thing?).
    I would really appreciate any suggestions as to what to try next.
    Thanks,
    Tamara

    UPDATE: FIXED!!
    Hi Peter, I'll file your RevoUninstaller tip for next time...and I hope all is well on that side of the pond!
    My problem appears to be with the semantics of the installer.
    When ran the 8.0.1 updater, I was presented with a dialog that only allowed me to remove program and all related components. (uncomfortable phrasing, but refers simply to the updater, not RoboHelp itself)
    Once I ran the "uninstall" on 8.0.1, I was able to run the "install" successfully.
    This was also the case for the 8.0.2 update and the Captivate 5 update
    SUGGESTION:
    restructure the offending dialog to explain why a user might get the uninstall option, and explain that only the update will be uninstalled.
    I'll certainly be writing a blog post and also posting at adobe.com/go/wish!
    -Matt

  • Problem update JTextArea with message from thread

    I have a JTextArea to present the actually status of an running thread. The thread sends strings like: System.out.println("Reading in new message...");to the standardoutput.
    The problem is, that my application freezes when it should update the JTextArea. Any idea and what type of actionListener is recommend to use for the JTextArea?
    try
       BufferedReader breader = new BufferedReader(new InputStreamReader(System.in));
       statusmsg = breader.readLine();
       statusTextArea.append(statusmsg);
    catch (Exception e){};Cheers

    In general, you can't update the Swing stuff from "side" threads. Side threads talk with the Swing event thread by creating Runnable objects which contains the necessary data (in your case, for instance, the JTextArea or its parent panel/window, and the text to append), and then invoking SwingUtilities.invokeLater() to have this object run() method called by the Sing event thread. See:
    http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html

  • IPhone problems updating to ios 5

    I've downloading the update, but before I install it itunes prompts me to backup and transfer app that have been purchased to itunes...  It backs up ok, but
    quits halfway through transfer....  What is going on??

    but you should have a backup in itunes.
    Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
    And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
    But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app!   Good Luck!

  • Problems updating blog with Blogger

    I want to make a new post to a blog I maintain with Blogger. First problem is that I can't enter text in the "compose" mode for the post body. I have to use "edit html" mode, which I guess will do in a pinch, but is not optimal.
    Secondly, when I try to attach a photo, the option is grayed out. I have pictures in my camera roll as well as in photo albums, but Safari won't give me access to them to upload.
    Any ideas how I can do this?

    Apple's servers are busy. Check again in a few hours or tomorrow.
    (89470)

  • Problem updating ipod with favourite cd

    hello
    I 'm new in this aplle family but I'm,having already problems.
    i've got an ipod color for x-mas and after a long time i'have found time to load it with my favourite musics.
    the problem is that after 4cds i've got a message that told me
    that it's impossible to read or write in this disk
    what happened??
    please help
    the music gets to the library but i can't drop it to my ipod it doesn't recognize it.
    i've resatrted my ipod and tried to syncronize again but i got the same message

    See this troubleshooting article.
    Disk cannot be read from or written to error syncing iPod in iTunes.

  • Problems updating iPOD with iTunes.

    My library has 4800 songs and iTune starts the update process normally. At some point through the process, the ststus bar will say "Ok to disconnect iPod" and nothing has been transfered. I also noticed that bottom of of the screen indicated the disk space used on the ipod, mine has a "locked" icon next to it. What does this mean?

    The switch at the top, flick that so your iPods not on hold. Then read the manual you got with the iPod.

  • Problem updating page with multiple forms

    Hello,
    Hoping that someone can point me in the right direction. I have a single page with 2 forms, on 2 different tables. Each form region has it's own set of update buttons, generated by the wizards. However, clicking on the Create button on my second form produces an "ORA-20507 invalid column value..." for a column that exists in my FIRST form/table - and I can't figure out why. I changed the second forms button names to Create2 and Save2 and made sure that the second forms ARP was using them, but still no luck getting rid of the error.
    Any thoughts would be most appreciated.
    Loyam

    Thank you for responding!
    I did make sure that the Page Process setup for each of the tables (of type Automatic Row Processing) have the correct button assignments in the Conditional Processing region - i.e., Form1 is using the Create button, and Form2 is using the Create2 button.
    I'm starting downn the road of coding my own Insert/Update/Delete handling for Form2 based on the following thread {thread:id=3927307}
    Sounds like Apex can only handle one ARP process per page?

  • Problems updating ipod with iOS 7

    is there any issues with the download itself every time I try  getting this check your network or connection at any point during the download, did try with ipod alone and the Itunes still getting the same error.
    any further info or fix??
    already have itunes updated, mac up to date no 3rd party software that might impact network or anything else

    Apple's servers are busy. Check again in a few hours or tomorrow.
    (89470)

  • Problem updating IPAD with itunes: "this device is not eligible", Problem updating IPAD with itunes: "this device is not eligible"

    Dear All,
    I have tried to update my ipad from ios 4.2.1 to ios 4.3.3 but this time itunes return me an error: "this device is not eligible". Now my ipad is not working (black screen, always in DFU mode).
    My mac is up to date (same for itunes)
    have you ever have this error ? How can I do to update to io 4.3.3 ?
    Thanks for your answers.

    I also have the same problem. I updated the iTunes and I get the same message when updating my iPad2.
    "This device is not eligible for the requested build".  This message appeared on two separate update attempts.
    What is to be done? 
    Thanks for any yips.
    I could leave it alone since the iPad seems to be working fine and perhaps should wait for the next iOS update
    rkw

  • IPhone SDK - Linking error with CLLocationManager

    Hello.
    I have a linking error when I try to use thr CLLocationManager in my iPhone application by using the example of source code given in the Developer Center.
    I have the following error : ".objcclass_nameCLLocationManager", referenced from literal-pointer@_OBJC@__clsrefs@CLLocationManager in localisation.o
    symbol(s) not found.
    Do you have an idea ?
    Thank you for your answer.
    Patrick Schevenels.

    Just for clarification, there's a flood of developers now purchasing Macs to code for the iPhone platform. For those of you new to Xcode, you add a framework by doing the following:
    1. Open your iPhone project in XCode
    2. In the project window, ctrl+click (or right-click if you have 2-button mouse) on 'Frameworks' folder > Add > Existing Frameworks
    3. Navigate to /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS2.0.sdk/System/Li brary/Frameworks/CoreLocation.framework
    4. Click 'Add' button
    5. Compile
    Also, for anyone coming for the ActionScript Java or C# world, I've been blogging on transitioning to iPhone OS development platform.
    http://www.digitalassassin.com/?p=15
    Message was edited by: P120D1GY

Maybe you are looking for