IPhone won't activate due to Error 0xE000004

Hello, so I purchased an iPhone 4 off Ebay because it wouldn't activate
I have a little knowledge of stuff like this and I thought maybe it would need putting into recovery mode and restoring that way, however.. every time I go to restore through iTunes it comes with error 0xE000004
Little bit more information about the phone:
- It doesn't appear to be blocked as I have checked it on various IMEI websites, it is open to O2-UK
- It does not have an iCloud account linked to it (something the previous owner also said)
- There is no option to activate the phone over Wifi for some reason,I thought maybe the Wifi was broken as when I opened the back cover there is a small metal clip, near the Wifi screw that was missing for the plate that covers all the connectors, so I bought an original one from Ebay and replaced it however there is still no Wifi option.
- Even though the phone is not blocked, when I put an O2-UK Sim card in there, it says no service
- There is no water damage
I have tried a Windows 7 and a Windows Vista laptop to try and restore and I still have not had any joy.
I have only managed to find a VERY small handful of people that have come across this problem over the internet
If you have any ideas, or know what might be the issue and how to resolve this I would very grateful.
Thank you

Hi there samsund,
You may find the troubleshooting steps in the articles below helpful.
Get help activating your iPhone 
iOS: Unknown error containing '0xE' when connecting to a Windows PC
-Griff W.  

Similar Messages

  • IPhone won't activate after updating to iOS7... even after connecting to iTunes...

    my iOS7 wouldn't budge after updating so I performed the silly mistake of doing a system restore. It updated but now my iPhone won't activate! Do you think it's the servers? I'm perfectly connected to my wifi and my phone is connected to iTunes!

    Yeah... Thanks! It finally managed to pull through... ugh... was getting slightly worried because I needed it for something important at the moment... but thankfully it's okay now.

  • My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    Connect the phone directly to the computer, not a hub.
    Disconnect all other USB devices except keyboard and mouse.
    Disable your firewall
    Disable your antivirus
    In iTunes if it recognizes the phone click "Restore"
    If it doesn't recognize the phone:
    Disconnect the phone from the phone end, leave the USB cable plugged into the computer
    Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
    While holding HOME connect the cable to the phone
    As soon as iTunes recognizes the phone release the HOME button and it should restore.
    If neither procedure works note the exact error message and post it.

  • After upgrading to a new 3GS, my original iPhone won't activate...

    After I upgraded to an iPhone 3GS, I restored the original iPhone with iTunes. Now, the iPhone says it's got an invalid SIM in it, and when I plug it into iTunes, it won't activate it. It's basically a brick now.
    Was I wrong in thinking I could now use the old iPhone basically like an iPod touch?

    I haven't seen any press release that supercedes that, but the one you reference refers to the ORIGINAL iPhone, not a 3G. There have been posts here and elsewhere indicating that the restore/upgrade function no longer works on the 3G once you update to 3GS.
    I suppose the original poster can put a phone call in to AppleCare to see if they might be able to get some help from them. I didn't make this rule, I am just reporting what everyone else is seeing, with or without the SIM card in the 3G.

  • My iphone won`t activate after updating to ios 5.1 plz help

    my iphone 3gs won`t activate after updating to ios 5.1 plz help

    I got mine sorted. Turns out because i got it unlocked the first time getting updates via itunes causes it to restart again. Had to get it unlocked at managed to get eveything back after restoring it from itunes. Very happy cause the guy in the apple shop told me i had to call apple and pay 35euro just to talk to them! I manged to get it unlocked for only 20 and its just like it was.
    hope you're able to get yours sorted

  • Iphone won't activate

    I have an iPhone 3gs and it was running on ios 4.1 so I upgraded to ios 6 and now it won't activate. I don't know what the problem is and I really need help because I need to use my phone.

    Was your phone hacked/jailbroken?

  • My iPhone will not synch due to error 1140, how can I fix this?

    How can I connect my iPhone to my Mac computer without error? Error 1140 keeps appearing

    Download and install the iPhoto 9.4.1 update, which was just released today. It may be the answer to your problems:
    http://support.apple.com/kb/DL1598

  • IPhone 5s, full reset, now won't activate due to activation server being temporarily unavailable

    Did "erase all content and settings" on my iPhone 5s yesterday, due to signal being extremely intermittent, came to try starting it up again, with the view of just putting everything straight back on from iCloud, and it wont activate, been trying for 12 hours now, and just says "Your iPhone could not be activated because the activation server is temporarily unavailable"
    I have tried numerous times over different WiFi networks, and also by connecting to iTunes... any help.. at all?

    http://support.apple.com/kb/ts3424

  • IPhone won't activate after restore - says wrong apple ID/password

    Hi everyone,
    I recently attempted to upgrade to the latest iOS on my iPhone 4. However there was an error, so my phone had to be restored. I did this, and was then prompted to activate my iPhone.
    However it is claiming that I am using the wrong apple ID/password when I am not. I am able to log into My Apple ID online and have done so, and have changed PWs and fiddled around with it but it won't let me sign in!
    Can anyone help?

    Hey dalbruel!
    Here is an article that can help you troubleshoot this issue with iMessage:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • My new iPhone won't activate. I tried to and it didn't work i'm not sure what to do.

    I got a new iPhone 5c for an early Christmas present, and it didn't activate right and now nothing will work and i'm not sure what to do. It won't let me restore the new iPhone because i can't log in to icloud. Help!!!

    Sorry, you're going to have to actually explain what the problem is. This is far too vague to have an accurate idea of what's wrong.
    What do you mean by:
    It won't let me restore the new iPhone because i can't log in to icloud.
    What exactly are you doing? What is the EXACT error message you get and where do you see it?

  • IPhone won't activate after "auto" reset

    Hi,
    I went to bed at 10:30pm last night, set my iPhone alarm for 05:30am this morning, dimmed my brightness to its lowest setting (as I always do, so I don't get blinded when I check the time during the night) and then left my phone beside my bed.
    This morning, when the alarm went off, I couldn't switch it off, because my iphone was in the middle of some "restore" after doing what can only be called an "automatic" reset.  I had to switch the phone off to stop the alarm.
    Now, I can't get past the activation screen and keep getting the "Your iphone could not be activated because the server is temporarily unavailable" screen.  No matter HOW many times I try, or how long I wait between tries, it just won't complete this part.
    I followed the advice in various forums, and tried connecting to iTunes.  However, iTunes says "The software on the iphone has expired and must be updated to a new version" - all of which I find extremely strange as:
    1)  My iPhone is (was - God only knows what it's on now) on the latest build of 5.1
    2)  iTunes is on version 10.6 (updated recently)
    3)  When I clear the iTunes message, it tries to sync the phone but, obviously as the phone hasn't yet activated after the auto-reset, can't.
    4)  The iTunes screen showing the iPhone information states that the software is the latest version and doesn't need changing.
    I'm now stuck with an iPhone which doesn't work and I don't live near an Apple store either - only a Stormfront store
    Anybody got any ideas?
    Thanks,
    Tony

    I have a similar situation. I woke up with a 'bricked' iPhone. I can't get into it as I had a beta version installed and the beta has expired. I used that beta version because the stable iOS 5.0 gave me a SIM error every so many hours (after which I needed to turn on and off my phone). Tried everything, and installing the beta solved that issue for me (really glad it did). I installed it as a non developer.
    I now can't update the iOS through iTunes, I can't get in my phone, I simply can't use the device as I can not get passed the developer screen. I can't even backup because a session cannot be started from iTunes. All iTunes is saying is "The software on the iphone has expired and must be updated to a new version" and when I check for update, it gives back "This version of the iPhone software (5.1) is the current version".
    So I'm stuck with a great device which doesn't work.    

  • IPhone won't backup, but no error message

    Hi!
    I got a message this morning saying that my iPhone hasn't been backed up in 3 weeks. I thought this was odd as I have it set to automatically back up, but I plugged it in today, connected to wifi, and tried a manual backup. I'm not getting any sort of error messages, but when the backup seems to be finished, I still see "Last backed up to iCloud: 12/17/12 at 10:06 PM." According to my phone, I still have 3.9 GB out of 5 available in iCloud storage, and I can't think of what the problem could be. Please help!
    Thanks,
    Sydney

    hi eric,
    thank you for your quick answer! what the console says is the following (extract):
    Post-back up thinning complete: 5 expired backups removed
    Backup completed successfully.
    Starting standard backup
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    No pre-backup thinning needed: 1.13 GB requested (including padding), 206.20 GB available
    Copied 744 files (2.7 MB) from volume [myvolume].
    No pre-backup thinning needed: 1.13 GB requested (including padding), 206.20 GB available
    Copied 67 files (93 bytes) from volume [myvolume].
    Starting post-backup thinning
    Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/[myvolume]/2011-10-05-170346: 206.20 GB now available
    Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/[myvolume]/2011-10-05-110315: 206.21 GB now available
    Post-back up thinning complete: 5 expired backups removed
    Backup completed successfully.
    Actually, this time it really backed up my data … but why now and a few days ago it didn't? (Console also says "Backup completed successfully." for this date.)
    Hm anyways, seems to work now, but I don't like the thought that I can't rely on it … would like to understand what this machine is doing … :-)

  • Cannot activate due to error in predecessor activity

    Hi,
    The activity cannot be activated(moved to active workspace) as the predecessor activity results in compile error. I would like to remove the predecessor activity as it is not significant anymore and is rather a hindrance to my future activations.
    Or should I correct my old activity.

    Has the predecessor activity already been checked in? If not, you should be able to revert it. If it has been checked in already, you can activate it with the Force Activation option enabled.

  • Iphone won't activate after iOS 6 upgrade

    Hi all,
    Went to backup my daughters iPhone and iTunes said that a new iOS (6) was availible and I should update. I did so and follwed all the instructions. the update seemed to go well. The Phone then rebooted and started with the grey iPhone screen and it asked to be reactivated.  i again follwed procedure but I kept on getting "...iPhone could not be activated  because the activation server is temporarily unavailabe..." message. I have tried this countless times, including resetting my modem/router so I dont believ that is the apple servers.
    What is the issue and how can I restore it?
    Would appreciate any help.
    Thanks

    Did u guys get this fixed? I have a friend with exactly the same problem!
    Upgrade a 3GS on 4.1 or 4.2 (don't remember) using the latest iTunes and it patched to iOS 6.
    Once there it's stuck in activation. Since the person has no wifi but only 3G network, the only option is to activate using iTunes which doesn't work. Though that PC is perfectly connected to the internet.
    Never jailbroken... now we're thinking that actually jailbreaking might be the only fix?!

  • OS X 10.8.5 won't update due to error 102.

    I first tried to update my iphone 5 to the iOS 7 and it kept saying error so I thought I would be able to update it with my computer, but my computer software needed to be updated and when I went to update it it said error 102. Why can't I update my software? I tried updating my computer through apple's website and when I click the link a page pops up saying acess denied.

    Ignore my last post.
    It appears Apple’s download servers are ‘overwhelmed’ today.  I couldn’t download the newest iTunes update or IOS 7 and there are a lot of discussions today about not being able to download. One poster said they had chatted with App Store support who confirmed the problem. Maybe you can download it here.
    10.8.5 Combo Update

Maybe you are looking for

  • Security Settings and Field Extraction

    Hello, I've run into a bit of a problem in .NET(C#) when trying to automate data extraction from a PDF. Specifically, I get an error stating "The document's security settings prohibit the operation being performed". The security method applied to the

  • Over Partition by in OWB 9i

    Hi, I am using OWB V9i. I need to implement an sql statement in a mapping.The statement is CASE WHEN (tr_dt=lead(tr_dt) OVER(PARTITION BY ID ORDER BY ID,tr_dt)) THEN lead(ef_dt) OVER(PARTITION BY ID ORDER BY ID,tr_dt) ELSE tr_dt END I am not able to

  • How to play *.rm files in Solaris 10 x86

    Hi all, I've installed Solaris 10 x86 in SunBlade 1100z. Everthing is okie, the GUI of JDS is very attractive. I think I like it. But I cannot open file *.rm. I try to search some software like Real Player but it run only in Windows or Linux platform

  • EDIAS2 Runtime installation fails

    1. I have reinstalled BizTalk on my dev machine 2. I removed the old databases 3. I started configuring different components including BAM and BAM configured correctly 4. However, I received an error when attempted to configure EDI/AS2 , and the foll

  • Pics In Dreamweaver8

    Hi, I use Dreamweaver8 and in my laptop I can t the pics in the templates but on the laptop of my wife , YES///??? Do I have to set up something on my laptop? Thanks for your help. Bruno.