Iphone4 mic quit working

My mic on my iphone4 stopped working no one can hear me I have replaced the mic once before

I found a loose connection in my mike. Nothing is ever easy. Thanks for the reply.

Similar Messages

Iphone4 - MIC not working only on phone call, But in recording MIC works good

My iPhone4 was working last 10 months till last week. it is bought from outside UAE and am Living in UAE
When I make a call , I can hear them clearly , but other side cant hear me.
I think iphone MIC is broken, but fortunately I tried recording for 10 minutes, it is working perfectly. I felt hardware working properly
Then I think it is software Issuebut,
When I detected the issue software version was 4.3.3, And Then I updated software to 4.3.4. Still the issue remains.
I tried several time restarting. No advantage
After all I deleted all my content by resetting from phone and iTunes, bothways.
Now my phone content looks like new iPhone and software is 4.3.4 and
Still the MIC not working only on a phone call
Unbelievable.
I went to more than 3 apple dealers in Dubai, like istore,protech.. All they refused service for iPhone.
They dont have service for iPhone, but they selling and are autherized reseller,
My phone still under warranty.
Do I get warrenty covering, or atleast it is serviced?
Or could you have any trick to get it worked
Trust you can help me.
Thanks in Advance
Nouf, Dubai

I've been having the exact same problem! I tried restoring, updating, suing earphones but NOTHING.

TS3406 my iphone4 mic not working

my phone mic doesn't work on normal calls made via using network carrier. works normally on facetime and viber and we chat apps.

Hello ashishmacha,
Thank you for the details of the issue you are experiencing with your iPhone 4s. The article below addresses the following symptoms:
Symptoms
Other people can't hear you, or have difficulty hearing you during a phone call or FaceTime call
Other people complain that you sound unclear during a phone call or FaceTime call
You hear no sound or the sound is unclear when playing back recorded audio
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iphone mic quit working. If I buy apple care, will apple send me a temp phone will mine is being repaired? Will it be sent before I send in mine or will I have to go without a phone for a bit?

Do I have to go without a phone if I send mine to apple for repairs? Can I buy applecare and apple will send me a temp phone BEFORE I send mine in?

"Is there anything I can do?"
Yes, you can exchange the handset for a refurbished out-of-warranty product for £216.44 (includes shipping + VAT). Treat your objects like women - with love, and respect.

My volume buttons on the side of my iphone4 quit working

my volume buttons on the side of my iphone4 quit working so now i cant turn up my call volume is there another way like in settings or something?

If the basic troubleshooting steps outlined in the User Guide don't help, then bring your phone into Apple for evaluation.

Internal Mic not Working, external mic quits arbitrarily, I'm at wit's end!!!!

Hey kids!
The Computer: Toshiba Satellite A355D-S69221
The Program: 32 Bit Windows Vista
The issue: Internal Mic not recognized, external mic quits midway through conversation, Realtek Digital output not plugged in.
So being the smart guy I am, a few weeks back I decided to do the smart thing and delete all the speech recognition software off this thing. I don't need it, so wth.
Now, my internal mic quit. I reinstalled the software, rolled back drivers, deleted drivers to rebuild the driver stack, did a BIOS update, did the GTA ViceCity cheatcode start (unplug everything hold power key 30 seconds, reboot, f2 to enter bios, f9 to update, f10 to save), and nothing.
I did notice that when I had the Realtek Digital Output set as standard, my mic jack was illuminated by a red LED, and the Realtek HD manager wouldn't pop up when I plug something in.
The last irritating part is that I will talk to my wife via vo/ip, the external mic I am using will just quit mid conversation, and I have to reload a driver to get it to work again. I am at my wit's end with this thing, can anyone help? The last thing I am goign to do is another system restore from an earlier date than I used before. Does anyone have any other hints/clues/ideas?
KFD

Thanks Jeff. No this isn't some kind of emergency so no one really minds my tinkering until it does get back up.
OK, I got it now. This is what my cyrus.conf looks like. It doesn't look like there's anything wrong with it...
# standard standalone server implementation
START {
# do not delete this entry!
recover cmd="ctl_cyrusdb -r"
# this is only necessary if using idled for IMAP IDLE
# idled cmd="idled"
# UNIX sockets start with a slash and are put into /var/imap/socket
SERVICES {
# add or remove based on preferences
imap cmd="imapd" listen="imap" prefork=0
imaps cmd="imapd -s" listen="imaps" prefork=0
pop3 cmd="pop3d" listen="pop3" prefork=0
pop3s cmd="pop3d -s" listen="pop3s" prefork=0
sieve cmd="timsieved" listen="sieve" prefork=0
# at least one LMTP is required for delivery
lmtp cmd="lmtpd" listen="lmtp" prefork=0
lmtpunix cmd="lmtpd" listen="/var/imap/socket/lmtp" prefork=0
# this is only necessary if using notifications
# notify cmd="notifyd" listen="/var/imap/socket/notify" proto="udp" prefork=1
EVENTS {
# this is required
checkpoint cmd="ctl_cyrusdb -c" period=30
# this is only necessary if using duplicate delivery suppression
delprune cmd="ctl_deliver -E 3" at=0400
# this is only necessary if caching TLS sessions
tlsprune cmd="tls_prune" at=0400
LIMITS {
imaplimit value=0
But yet it insists with the message: relay=cyrus, delay=239180, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: No such file or directory_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
when I try to send a message through the server. Could this be a permissions thing? I've fixed the permissions a lot of times and nothing seems to get changed...
Again, thanks for everyone's help. I'm sure this is something dumb that I'm just missing but since I'm not familiar enough with the system it's hard for me to figure out what that is!

Why has my home button on my Iphone4 quit working?

I am trying to find out why my home button on my Iphone 4g has suddenly quit working. Can anyone help me try to solve this problem?

No one here can answer this question for certain.
Could be hardware failure or a software problem.
If no change after the standard troubleshooting steps which in order are:
Power your iPhone off and on.
An iPhone reset.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after the last step, your iPhone has a hardware problem.

MIC on iPhone4 isn't working

Hi, I cannot get heard when I use built-in iPhone4 MIC, I have to connect the earpiece to be heard. Either, when I activate loudspeaker the caller can hear me using the built-in MIC. Please help on resolving this

You say the system settings are correct?
I assume you are referring to System Preferences> Displays > Options>
Under which you can set the button to switch the display on and off or sleep and wake the system.
I don't have two cinema displays to test this, but as it usually provides a separate dialogue with any and all options available for each display on each display. I would have thought that the power options are also separate. Make sure you have it set appropriately for each monitor.

Remote and mic not working

I got a earpods with remote and mic for my iPod touch quite while ago,
it stopped working a couple of months ago, how can I fix this!

First see if the earphones/mic/remote work with another device or if a know working one works with your iPod.
If the iPod is the problem:
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Fix it yourself
iPod Touch Repair – iFixit

All of the the Windows Sidebar Apps have quit working

With the latest update today, all of my Sidebar gagdets have quit working. When I go to reinstall, I am asked what Firefox should do with them. Why? My gadgets are a windows thing.

I really have no idea what you are doing or what your signal routing looks like, nor do I know how experienced you are with audio software and signal routings in general. What I now think you mean is that you can't monitor your input properly, you cannot hear the signal of the mic? Is that right? Or how did you arrive to the conclusion that none of your plugins work on audio tracks? Have you actually put an audio file on your audio track?
If you want to hear your input +processed through Logics' plugins,+ you need to enable Software Monitoring - just add its button (with a 'muted speaker' icon) to the transport by rightclicking the transport and ticking *Software Monitoring* on the list. Button grey=off, button green with dot in it=on.
Of course the channel strip/track you receive the input on should also have an output selected, or you will never hear anything.

Both internal and USB mics not working

Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
Does anyone have any idea what could possibly be wrong?
For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
http://animeutahime.com/temp/faultymicrecording.mp3
iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
Having said that, I really like to get my internal mic back up and running again.
iBook Mac OS X (10.4.10) 1.5gb RAM, 60gb hard disk

I just upgraded to Safari 5.1; now none of my mice will work correctly

I just upgraded to Safari 5.1; now none of my mice will work correctly on flash intensive websites (Evony); have reinstalled the latest version of flash, have emptied caches, have reset the first 7 items in the reset list, dumped preferences and restarted. Nothing works. And, to boot, 1Password no longer works. How can in reinstall the former version of Safari that I was not quite so happy with but at least things worked?
I am now going to have to use Firefox for the majority of my Internet time. PLEASE, can someone help me?

Ok, I kept on looking and back in 2009, a fellow had a similar problem with his iPod. He went to network settings., reset network settings to factory defaults, just like the apple guy told him... and it didn't fix it or so he thought....so he deleted an app from his phone that he had purchased to force it to place it back on when he used iTunes to resink his iSink or whatever. Anyhow his app then worked! He clicked on each of his other apps and Voila!! they all started working again. I did the above and it worked for me.
Who knows which step fixed it ... the reset of the network settings or the deletion of a single app to force the re-sync from iTunes. Guess it doesn't really matter...
I sure hope this helps someone out there with a similar problem and maybe they won't have to waste as much time on it as I did!

27: iMac Apple Mini DisplayPort to DVI adapter quits working post-firmware

I iMac Apple Mini DisplayPort to DVI adapter suddenly quit working after I installed Apple's latest iMac display firmware update. This is an Intel Core i5; the monitor is an LG Flatron 24" Wide, and when it powers up it says "no video input" and goes into power-saving mode. No amount of replugging cables helps, but the monitor works fine on other computers.
The Displays control panel just shows one monitor, and clicking Detect Displays does nothing.
I suspect Apple's Display Firmware Update. My installer log shows the following, but the problem only happened today after the latest update:
6/1/10 9:45 AM 27-inch iMac EFI Firmware Update 1.0
6/1/10 9:45 AM 27-inch iMac Display Update 1.0
6/4/10 11:47 AM 27-inch iMac SMC Firmware Update 1.0
6/4/10 11:47 AM 27-inch iMac Display Update 1.0
6/5/10 7:29 AM 27-inch iMac Display Update 1.0
I have automatic updates disabled, but after each update I would see more firmware updates ready, but caution leads me to never install more than one of these at a time, and then to wait a while to see if anything bad happens. The odd thing is that the Display Update 1.0 seems to have been installed three times in this course of events. Alas, there appears to be no way to uninstall a firmware update.
Here is the System Profiler Graphics/Displays output:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Display Connector:
Status: No Display Connected
It says the Mac sees no display connected, and the display gets no video signal. Since the adapter is an active device (it has powered electronics to convert DisplayPort signals to DVI signals) I suppose it could have just coincidentally died. But that seems unlikely given that the thing worked perfectly just before the last firmware update.
Does anybody have similar experience, or better yet, a fix?

Unfortunately the Apple Knowledge Base does not give much information about this update. Such has how to tell if it has been successfully installed. I suspect that because it keeps recurring in the install log that it has not been installed successfully as yet. Are you receiving this update through Software Update? Can you locate the installer for this update? It maybe located in Apps/Utilities.
Some firmware update installations can be interrupted/corrupted by attached devices. If you find the update's installer on your iMac, I suggest that you detach all external devices from the iMac, use an Apple USB keyboard & mouse if available, follow the instructions carefully and install the update manually. If you do not locate the installer I suggest downloading manually from the link below and installing it.
The Knowledge Base article mentions that your iMac should also have a Graphics Firmware Update. I suggest that you download and install that as well.
27-inch iMac Display Firmware Update 1.0
http://support.apple.com/kb/DL998
27-inch iMac Graphics Firmware Update 1.0
http://support.apple.com/kb/DL984
Dah•veed

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

Email from within iPhoto '08 (7.1.1) quit working

I am running Leopard (10.5.1) and iPhoto '08 (7.1.1) on a 2.4ghz 17" MBP. Whenever I try to email a photo from within iPhoto it pops up a window to let me choose size & options, I hit the Compose button, it will then popup a window saying that it is Preparing photos for email... then that window just goes away and it never creates the new email. I see this same behavior regardless of whether or not Mail is already open and regardless of what photo I am trying to email. This was working fine in the past... believe that it quit working after the upgrade to 10.5.1 (but not absolutely positive of that)... Any troubleshooting ideas would be greatly appreciated as I use this feature quite often.
Cheers!
Kirk

Kirk:
Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Next, if needed, download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Iphone4 mic quit working

Similar Messages

Maybe you are looking for