IPhoto 08 Version 7.1.5 with 510 gb in a single library. I move it to a hd but can't open in a new mac iphoto version 8. It rebuilds and then stops. What to do?

iPhoto 08 Version 7.1.5 with 510 gb in a single library. I move it to a hd but can't open in a new mac with iphoto version 8. It rebuilds and then stops. What to do?

Select your My Book Studio for Mac icon on your Desktop and type Command + i to bring up its Info pane. Check the formatting. It should look like this:
If it's not formatted as such you'll need to reformat it after backing up what's on there now.
OT

Similar Messages

When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.

When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
== This happened ==
Every time Firefox opened
== I tried to download firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)

When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

The Mac OS X Lion begins installing and then stops and gives the following error message: Mac OS X can't be installed on the disk Macintosh HD because a recovery system can't be created. How do I fix this problem?

OS X Lion begins installing and then error message comes up that it can't be installed on MacIntosh HD because a recovery system can't be created. What do I do to fix this problem?

What to do if the installer warns that no Recovery HD can be created
Some disk partition configurations may result in the OS X Lion installer reporting that it could not create a Recovery HD. In these situations, even if you are permitted to continue the install, you should quit the install and create an external, bootable OS X Lion hard drive with a Recovery HD, first. You will be able to return to the upgrade to OS X Lion on your computer's boot drive after creating the external Recovery HD.
Important notes
Your storage device must have at least 13 GB available (after formatting) to install Lion and an Internet Restore partition.
These steps will erase and reformat the storage device. OS X Lion: About Lion Recovery will instruct you on setting up the storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install Lion and an Internet Restore partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure will install a version of the OS X Lion that is compatible with the Mac it was created with. Using this Lion system with a different kind of Mac may produce unpredictable results.
Your computer's serial number will be sent to Apple to help authenticate your request to download and install OS X Lion.

My Hotmail account is blocked. I can log in but can not open the emails. If I use Iternet expolrer it works fine. What can I do?

My hotmail is blocked.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

TS1702 Whenever I try to download FIFA 14 it installs and then stops what do I do to that

FIFA 14 is just installing and stopping
How do I download from App Store

does it say its disabled or disabled for security reasons?
if it says its disabled for security reasons you have to call applecare to get reenabled.
if it just says disabled go to expresslane.apple.com and choose itunes>itunes store> and pick through the selections it gives you
you should have choices to choose a call/chat/or email.
using chat is the best way to do it.
(sometime sit doesnt give all 3 options.)

IPad Numbers 2.0.1 runs fine but now cannot open iCloud docs on Mac, Numbers version 2.3

Numbers document created on Mac, saved in iCloud. I can open the doc on the iPad but on the Mac, it tells me I need to purchase a new version of Numbers. Why? I need to access this doc on the Mac...now!

You cannot access iCloud on a Mac running Mac OSX 10.4. Are you sure, the system version is correct?
If you are running iWork '09 (iWork 09 9.0.1) on your Mac with Numbers 2.3, you must at least have MacOS X 10.5.6 installed.
if you want iCloud support for iOS apps, you need the iWork 9.3 update,see: About the iWork 9.3 Update
And this update requires OS X Lion v10.7.4
Is your iMac compatible with Lion or later?

Cant find the right forum for this but can i restore my hd from time mch to a year ago and then restore individual files such as logic lprojects that are on same time mchne backup from last week?

cant find the right forum for this but as i am having problems booting my macbook pro, keep having to reser pram etc and now wont boot at all.....
aill this theoretically work?
a. Restore entire macpro hard drive from time machine to a time over a year ago before problems started
b. Restore more recent individual files such as logic projects individually from same time machine backup
c. install any programs manually again only couple of vsts
please answer direct question as i have tried everything else and nonhardware problems just will no longer boot after months of reseting each time
cheers

oops. typo: "I went ahead and befored the restore." should be... I went ahead and performed the restore.

Multicast works for a day and then stops

I'm running multicast in unicast mode on our WLC because I can't enable PIM on wired side yet for a couple reasons. It works consistently on 3 out of 6 WLAN's. And the weird thing is the other 3 WLAN's will work for a day, and when I come in the next day, multicast traffic has stopped flowing. I have verified this through IGMP snooping, using a bonjour browser, testing airplay, and using packet capture on a wireless NIC. 2 of the WLAN's are configured almost identically, but one works consistently day after day, and the other only works for a day after resetting the wlan. I have been coming in the morning and changing a single setting back and forth just to reset the WLAN so it will work for the rest of the day. I'm just writing this to see if someone can think of why it would work fine for the shole day and then stop working by the next morning. It's not an IGMP timeout setting, because it works for much longer than the timeout and behaves the same way even without IGMP snooping on. It started doing this after upgrading to 7.0.240.0. We have very little amount of multicast traffic on wireless, and low channel utilization. It does the same exact thing whether 802.11a or 802.11g so I don't think it has to do with data rates. When I have IGMP snooping on, and on the WLAN's where it's not working, the controller will see the multicast group join message from the client, but the client doesn't see the IGMP query from the controller. It shouldn't be wired config related since it's unicast mode. I've tried with and without broadcasting enabled. Any ideas?

Okay, so I discovered two things, but I still don't know what caused this problem. When I was running 7.0.230.0 I had increased my EAP-Broadcast key interval to 86400 due to a bug. This seems to be related to the fact that on the wlan's where multicast was not working, it stopped by the next day. When I backed this interval down to 3600 the multicast stopped working after an hour instead of a day. So that's why I believe it was somewhat related to the broadcast key, since that key is used for multicast.
What I realized is that multicast was working on all the wlan's on all AP's that had been rebooted since the controller upgrade (They had been rebooted due to a switch losing power). This is weird because all the AP's were rebooted when they received their own 7.0.240.0 software upgrade, so I don't know why they would have needed to be rebooted again. Anyway, I rebooted a few more AP's and multicast works properly on all wlan's on those. I'm just replying to my own thread here in case someone has a similar problem after upgrading your controller - try rebooting all your access points again. Or maybe reboot after changing EAP-Broadcast Key interval.

I have just started with apple tv. I rented and downloaded a movie from itunes on my macbook pro and tried to watch it. I got the movie up, but it only played a picture for about 3 seconds and then stopped, also no sound? What am I doing wrong?

Please help me play a rented itunes video on apple tv. Have a pictue and movie runs for about three seconds, and then stops. No sound? But I can play any music from my library with sound?

Is the movie still buffering? you may have a slow internet connection. Music files require far less bandwidth than movies.

Begins capture and then stops (says problem with tape)

When I try to capture (whether it is with Clip or Now) the capture begins for three seconds and then stops citing a problem with the data. The menu suggests that there may be a problem with the DV tape. (I can preview with no problem). I've tried many tapes and all have the same result leading me to think there's something up with the program.
I haven't specified any system preferences other than what is suggested for default. The program recognizes and controls my device with no problem. I just can't capture. What should I do?
I'm using a Panasonic DV NV-MX8EN (Asia model).

If you have an anti-virus app running, disable it.
Also try switching off File Vault if it's on.
Al

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

I am using an apple TV to show a slide show which is sent via WiFi from a mini computer. The slide show repeats for a few hours and then stops and shows "no signal". What's going on- and how do I get the show to cycle indefinitely?

I am using an apple TV to show a slide show which is sent via WiFi from a mini computer. The slide show repeats for a few hours and then stops and shows "no signal". What's going on… and how do I get the show to cycle indefinitely? (I have set the server to NEVER sleep)

Welcome to the Apple Community.
Have you also set the Apple TV not to sleep.

Ipod touch 4 i can no longer watch movies, transferred to the ipod, on videos app it simply says loading and then stops. On my ipad mini with older ios it still works.

Ipod touch 4 i can no longer watch movies, transferred to the ipod, on videos app it simply says loading and then stops. On my ipad mini with older ios it still works. So how can I fix this I have tried converting videos into different formats but it will not work.
Is IOS 8 really appropriate with Ipod Touch 4, if the older Ipods do not have the capability then why are we prompted to install new operating systems.
Thanks.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work.

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

Basic troubleshooting techniques for any problem
Restart the computer = joy?
Reset the router = joy?
Restart the computer in Safe Mode = joy?
ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
ÇÇÇ

IPhoto 08 Version 7.1.5 with 510 gb in a single library. I move it to a hd but can't open in a new mac iphoto version 8. It rebuilds and then stops. What to do?

Similar Messages

Maybe you are looking for