IPhoto 11 slideshow music: Can I start music after 1st slide?
Can I start the music at the second slide in IPHOTO 11 slideshow?
No. However, you can add a track of dead air (silence) of a few seconds and use that track with the other track in a custom playlist. You may have to experiment with the length depending on the length of the sideshow if you use Scale to Music. If you set a definite slide display time create the dead air track to that length.
You can use a 3rd party audio editor or Garageband to create the dead air track.
OT
Similar Messages
-
Can't start Tomcat after installing Bea WorkShop for JSP
Hi,
I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.I installed BEA Workshop for JSP Version: 3.1.0
Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
Thanks for your assistance.
Ron -
Can't Start Portal After Install
After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the same message.
What password should I use to start the server?I've followed the directions and am experiencing the exact same problem. Brand
new installation of Weblogic server 6.1 SP2 with examples. That install is working.
Then added Portal 4.0 SP1, updated the license file and I have the same issue
with the Illegal access exception resulting in the "Fatal initialization exception"....
Hmm!
[email protected] (Bowrat) wrote:
Below listed are the common errors you run into during installation
process:
- You need to have the correct version numbers of both the weblogic
server and the portal server. For instance the portal server 4.0 (eval
copy) will only run on WebLogic 6.1 SP1. So check the edocs for
supported platforms
- Make sure you have the installed the full version of the weblogic
server (including examples)
- Finally, you need to run the UpdateLicense.cmd file to update the
license.bea under ur Bea Root
Give it a shot after u have checked all of the above three - goodluck
- Bowrat
www.Bowstreet.com
Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
From: Steve Anderson <[email protected]>
Newsgroups: weblogic.support.install
Subject: Can't Start Portal After Install
References:
NNTP-Posting-Host: 209.11.114.150
X-Original-NNTP-Posting-Host: 209.11.114.150
Message-ID: <[email protected]>
Date: 13 Feb 2002 20:25:53 -0800
X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
Organization: BEA SYSTEMS Inc
Lines: 18
XPident: firewall-user
Path: newsgroups.bea.com!209.11.114.150
Xref: newsgroups.bea.com weblogic.support.install:9600
After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the samemessage.
What password should I use to start the server? -
We changed PORTAL password by going top sqlplus and OAS. Thinking it will make changes at both places. Now we see that when we start OAS. OC4J_BI_FORM does not start???
I provided an answer in the Portal Security forum:
Can not start OC4J_BI_FORM after PORTAL user password change -
Can you create apps after 1st May 2015 using Adobe DPS single edition?
Can you create apps after 1st May 2015 using Adobe DPS single edition?
I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE.
Does anyone know if this capability will just be 'switched off' at midnight 1st May 2015?? There are huge costs for going the enterprise route but with no date in sight for Publish to be launched I am not sure I can wait for this, or should I???Adobe states: Please note that the Digital Publishing Suite, Single Edition, service will be available for use until May 1, 2015, but beyond that date the service will no longer be available.
So essentially my licence will expire on 1st May - Adobe's note just mentions 'service' - even though part of CC and I will not be able to maintain my app or create any more IPA's after 1st May. I can't beleive there is nothing to switch over to other than paying thousands of pounds for enterprise??
Just all so vauge, feels like a plug is going to be pulled and thats it??? Maybe I am missing something? -
Iphoto 08 slideshow music not playing
After making a slideshow with iphoto I mixed some songs together using garageband, then exported the mixed songs to iTunes.
But when I choose that track in iTunes for my slideshow it doesn't play. I've tried a bunch of other songs they won't play either. I have done this before using iphoto 06 and didn't have any problems. But now with 08 I can't seem to get any music to play with my slideshow.
Which means no exporting to iDVD, no burning to a disk, no showing off to my friends.
Can anybody tell me what my problem is??soulmanbdr529:
Welcome to the Apple Discussions. Are you able to get non-Garageband mixed playlists to work in iPhoto's slideshows? If so then there's something GB is doing to the joined tracks that iPhoto doesn't like. For that you'd probably get more informed responses in the Garageband forums.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
IPhoto 11 - slideshow music issue on manual picture change
Hi community,
do you experience the same behaviour?
When navigating through the pictures in an iPhoto 11 slideshow manually e.g. by using forward and backward arrow keys, then the music always stutters or let's say "jumps" a little bit. Very annoying!
Does anybody have the same issue? Does anybody know a solution for this?
Thanks in advance,
FloYes. iPhoto is jumping to the music synced to that slide when you use the advanced arrow key. That's normal. The only solution is to let the slideshow play itself out.
OT -
IPhoto 5 slideshow music still available after upgrade to iPhoto6?
I've just upgraded to iPhoto6 and see that the default slideshow music has changed. I'd still like to use the iPhoto5 default music - does anyone know if this should still be available?
iLife 6 installs a new bunch of sounds, tunes, Garageband loops, etc. as well as the older ones. I believe you will be very impressed with the assortment that Apple provides (/Library/Audio/Apple Loops/Apple/iLife Sound Effects Folder). I know I was!
Griff -
Iphoto 11 slideshow & music not working [OSx 10.8.2]
Hi,
For some reason my slideshow will not play music after I press "PLAY."
Is there a reason for this? Volume is up and everything looks to be ready to play the slideshow; I think is has to do with the new OS. I've had no problem in the past.
Any thoughts?
Thanks,
PeterCLOSE THREAD. THE PROBLEM FIXED ITSELF
-
[SOLVED] Can't Start MySQL after upgrading to 5.1.41-3
I can't start mysqld with 'mysqld start'.Here is my mysqld output:
[ahao@sky ~]$ mysqld start
091125 18:33:48 [Note] Plugin 'FEDERATED' is disabled.
091125 18:33:48 [Note] Plugin 'ndbcluster' is disabled.
091125 18:33:48 InnoDB: Started; log sequence number 0 44233
mysqld: Too many arguments (first extra is 'start').
Use --verbose --help to get a list of available options
091125 18:33:48 [ERROR] Aborting
091125 18:33:48 InnoDB: Starting shutdown...
091125 18:33:49 InnoDB: Shutdown completed; log sequence number 0 44233
091125 18:33:49 [Note] mysqld: Shutdown complete
This is my /var/lib/ complete with permission settings:
[ahao@sky ~]$ cd /var/lib ; ls -al
total 84
drwxr-xr-x 20 root root 4096 2009-11-25 18:08 .
drwxr-xr-x 13 root root 4096 2009-11-25 13:51 ..
drwxrwx--- 2 root policykit 4096 2009-05-10 09:10 PolicyKit
drwxr-xr-x 2 policykit root 4096 2009-05-10 09:10 PolicyKit-public
drwxr-xr-x 3 root root 4096 2009-09-19 12:19 bluetooth
drwxr-xr-x 2 root root 4096 2009-09-16 22:09 dbus
drwxr-xr-x 2 root root 4096 2009-11-23 17:38 dhcpcd
drwxrwxrwt 2 root root 4096 2009-07-19 18:17 ex
drwxr-xr-x 2 root root 4096 2009-09-16 22:38 hwclock
drwxr-x--- 2 root locate 4096 2009-10-22 06:55 locate
-rw-r--r-- 1 root root 462 2009-09-20 00:02 logrotate.status
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 misc
drwxr-x--- 2 root locate 4096 2009-11-25 18:09 mlocate
drwxrwxrwx 4 mysql mysql 4096 2009-11-25 18:33 mysql
drwxr-xr-x 6 root root 4096 2009-09-07 08:54 nfs
drwxr-xr-x 4 root root 4096 2009-11-25 18:08 pacman
drwx------ 3 root root 4096 2009-11-21 03:30 polkit-1
drwxr-xr-x 2 root root 4096 2008-09-06 14:33 rarian
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 syslog-ng
drwxr-xr-x 3 root root 4096 2009-10-19 20:10 wicd
drwxr-xr-x 2 root root 4096 2009-11-21 02:35 xkb
/etc/mysql/my.cnf is out-of-the-box
What seems to be the problem here? Please shed some light...thank you
Last edited by akiglobal (2009-11-26 07:41:00)How silly of me.....first of all...I entered 'mysqld start', I should have just entered 'mysqld', second of all, I didn't change the file permission on /var/run/mysqld. I change /var/run/mysqld file permission into 'chmod 777 /var/run/mysqld -R', after that mysql works!
-
Can Not start Database after Server is restarted !!!!
I am building a oracle Hyperion Essbase and planning sandbox on my laptop using VMware 9.0
and 11gr2 as ny database.
Once I complete the install and config, I am installing the essbase EAS client, once that is completed I have too restart the server
once the Server is back up, the database is giving me the following Error:
Database Instance: Hyperion
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed Aug 31, 2013 2:19:45 AM EDT
Database Instance
Host localhost
Port 1521
SID Hyperion
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Listener
Status Down
Host localhost
Port 1521
Name LISTENER
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin
Details TNS-12541: TNS:no listener
Agent Connection to Instance
Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach
Change Status Details
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
Disconnected
Database Instance: Hyperion
Error Message
The operation for starting up the database has failed. Click 'View Details' to see the error. You may have to perform a recovery.
View Details
Perform Recovery
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed Aug 31, 2013 6:56:37 AM EDT
Please adviseNot clear what you are asking instruction i am following
again I need a Database schema for Oracle Hyperion Shared Services
I set up the database and config the Hyperion Essbase application
but when I restart the server the database gives me the above error
Listener / Status Down / Host localhost
and
Agent Connection to Instance Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach
I manually went into the database instance and started the Listener
but I can not start the database
it is saying me to do a recovery ????
Details
SQL> Connected to an idle instance.
SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
Disconnected
Database Instance: Hyperion
Error Message
The operation for starting up the database has failed. Click 'View Details' to see the error. You may have to perform a recovery.
View Details
Perform Recovery
what can I do Please advise -
Can't start up after disconnect ethernet network of 2 macs
I tried conecting 2 macs via ethernet. Personal file sharing was turned on with both. Printer sharing seemed not to work, so that was disabled on both. Ethernet cable from systems to router connected to cable modem. Seemed to work well for my purpose -- access to second drive on old 733 G4.
Before I disconnected the ethernet cable, I turned off file sharing on both machines. They seemed to run fine after disconnect. Then turned off the G4.
I left the iMac running with some software active for one day while away from home. Returned to see blank screen. Moved trackball to wake from what I thought was display sleep but nothing happened.
Install disk (10.4.4) will start up machine, but cannot install to the internal drive since it is not seen. Disk Utility shows drive, but no volume to repair disk.
My question: Can I start up my iMac in a way to bypass looking for a network startup and see the internal drive?
20" iMac Core Duo 2.0 Ghz Mac OS X (10.4.6)"Target Mode will only work with ATA disks"
No, that is not correct, also works with SATA, which is in all Intel Macs. However, I think I recall that both computers need to be updated to the same Mac OS X version, such as 10.4.6
Apple article Startup key combinations for Intel-based Macs
Apple article with example of Firewire Target Disk usage with Intel Macs
Back to attempting normal startup:
hold down the "option" key instead of the x key above, and hold until the disk option you want to select appears. From my experience, the iMac Intel will show the startup disc choices quickly, within less than a minute under normal conditions, much quicker than the G5's. -
Can't start RoboHelp5 after I used trial of RH6
I installed the trial version of RH6 on my computer. (Before
doing so, I made backups of my project, in case of non
compatibility with RH5). After the trial period I decided not to
buy it yet and uninstalled RH6, because I couldn't find important
differences (at least not concerning the functions I'm using) and
because the font problem (conversion from Arial to Times, even with
the Adobe patch and after uninstalling alle security updates for
Office) was the same with RH6.
Now I can't start my projects at all. When I try to start the
RH Explorer I get a message, that the registry AppPath can't be
read. I uninstalled both: Office and RH completely, reinstalled
Office 2003, then RoboHelp, but the same problem is appearing.
Even the projects I saved as backup and that I never opened
in RH6 don't work any more.
Any idea what I can do? (can there be hidden elements of RH6
which are not deleted automatically, when uninstalling with the
Software menu in my control panel?)On my site there is a topic about installing and
uninstalling. In it there is reference to an Adobe topic covering a
full uninstall which does require some registry editing. That was
written for X5 but I think it will cover RH6. I cannot guarantee
that though.
Make sure you create a System Restore point before you start
playing with the registry and only do that if you feel confident.
If not, enlist some help from IT or a developer. -
Can't start apache after linking mod_wl_20.so in the https.conf
I get a segementation fault when trying to start apache after i have linked the apache plug-in.
Anyone ever run into this?
I fails whether the <IfModule> statement is there or not.Appreciate your response. This is all I have done.
Installed IHS 2.0.47, copied mod_wl_20.so file to modules directory and made one entry in httpd.conf:
LoadModule weblogic_module modules/mod_wl_20.so
IHS core dumps on when tried to startup. This is all that is documented in the "Using Web Server Plug-Ins with WebLogic Server" document. Please let me know if I am missing any additional information. Thanks! i would appreciate if you can email me your httpd.conf file for my reference. Thanks!
[email protected] or [email protected]
Suresh, -
Can't start UCSM after java upgrade
Hi
After I have been recommended to upgrade to newest java, I can't start UCS Manager anymore.
I try from a Windows 7 64 Bits computer and a Windows 8 64 Bits computer.
Same error.
As you see, I have java 1.7.0_07. It is higher than the reguirement.
UCSM version is 2.0(2q)
Because there is some security issues with earlier java versions, I don't want to downgrade.
Do anyone have any solution on this problem?
I have uninstalled every version of Java, and just installed the newest, but it didn't help
Thanks for any help.Hi Sting,
For you to use 1.7 you need to have UCSM version 2.0.3a and above.
http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/OL_25363.html
(check the system requirement section).
At this point, the only option for you is to downgrade back to a 1.6 version.
./Abhinav
Maybe you are looking for
-
Please help! I really have no idea how to do it.. And i don't want to lose all my stuff. My old computer is still working but it's super slow it's an acer. and my new computer is a macbook pro!
-
Select count from large fact tables with bitmap indexes on them
Hi.. I have several large fact tables with bitmap indexes on them, and when I do a select count from these tables, I get a different result than when I do a select count, column one from the table, group by column one. I don't have any null values in
-
Error found in Communication channel monitoring ( component monitoring)
Hi Experts, When i executed the RFC from R3, i got the below error in runtime work bench. please help me out if any one knows, i already gone throug some of sdn linke, but i am not able to get exact solution. com.sap.aii.af.rfc.RfcAdapterExceptio
-
Time Capsule w/iTunes Master Lib not connecting
I have a Time Capsule and put the iTunes Master Lib on it. I connected to it with a Windows 7 machine and iPad 2. I am now trying to connect my Mac ... now nothing can find the master library, and I can't see to set the Mac iTunes master lib to the
-
Can´t install adobe acrobat X pro in windwos 8.1
can´t install adobe acrobat X pro in windwos 8.1