Iplanet Integration with weblogic

Dear All,
We want to integrate IPlanet with weblogic application server.
Please suggest the procedure for the same i.e docs , URLs.
Thanks
Prashant

kindly take a look at our reverse proxy plugin
http://docs.sun.com/app/docs/doc/819-0902
also, please note that if you need to serve only servlet / jsp , then sun java system web server 6.1 has integrated container that can do the job very well.
for any further business process logic , you can use the app servers with 'reverse proxy enabled' so that these requested can be forwards to either Sun Java System Application Server or Web Logic
thanks
sriram.

Similar Messages

OAM (10.1.4.3) Integration with WebLogic App Server (10.3.0 or below)

Hi All,
Can I use OAM 10.1.4.3 (Authentication Provider & Identity Asserter) to implement SSO with weblogic App Server 10.3.0 or below?
OAM 10.1.4.3 Authentication Provider & Identity Asserter is the recommended way to configure SSO with Web Logic App server 10.3.1 ( Oracle Middleware 11g).
And
OAM 10.1.4.2 uses WebLogic SSPI to configure SSO between OAM 10g and WebLogic App Server 10.3.0 or below.

Hi,
This is how the integration goes with different versions of WLS and OAM.
There is oamAuthnProvider.jar available with OAM 10.1.4.3 downloads. So it provides the assertion functionality.
Can I use OAM 10.1.4.3 (Authentication Provider & Identity Asserter) to implement SSO with weblogic App Server 10.3.0 or below?
Mahendra: Yes
OAM 10.1.4.3 Authentication Provider & Identity Asserter is the recommended way to configure SSO with Web Logic App server 10.3.1 ( Oracle Middleware 11g).
Mahendra: Yes, this is the recommended and easy approach.
OAM 10.1.4.2 uses WebLogic SSPI to configure SSO between OAM 10g and WebLogic App Server 10.3.0 or below.
Mahendra: Yes, older version of OAM uses SSPI connector installation.
HTH.
Mahendra.

Iplanet LDAP with Weblogic

Hello All,
I forgot the subject line. I'm trying to set up iPlanet Directory 4.1 with
WebLogic 5.1 Sp3 on Solaris7. Weblogic will see the users I specify
(username,groupname) but not
the group, additionally it will allow you to login if you know the
username and anypassword. I get the following error when loading the
http://localhost:port/AdminRealm. I've gone through the LDAP
properties file a million times. Lastly, now it does a core - dump
while trying to start.
Please help.
Richard
################# Begin Error ###############################3
java.lang.NullPointerException
at weblogic.security.ldaprealm.LDAPDelegate.magicBunny(Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.addGroupMember
(Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.getGroupMembers
(Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.getGroupMembers
(LDAPDelegate.java:518)
at weblogic.security.ldaprealm.LDAPRealm.getGroupMembersInternal
(LDAPRealm.java:81)
at weblogic.security.acl.AbstractListableRealm.getGroupMembers
(AbstractListableRealm.java:302)
at weblogic.security.acl.FlatGroup.ensureFreshness
(FlatGroup.java:149)
at weblogic.security.acl.FlatGroup.members(FlatGroup.java:236)
at admin.AdminRealm.composePage(Compiled Code)
at admin.AdminServlet.service(AdminServlet.java:257)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865) at
weblogic.servlet.internal.ServletStubImpl.invokeServlet
(ServletStubImpl.java:123)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet
(ServletContextImpl.java:744)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet
(ServletContextImpl.java:692)
at weblogic.servlet.internal.ServletContextManager.invokeServlet
(ServletContextManager.java:251)
at weblogic.socket.MuxableSocketHTTP.invokeServlet
(MuxableSocketHTTP.java:363)
at weblogic.socket.MuxableSocketHTTP.execute
(MuxableSocketHTTP.java:263)
at weblogic.kernel.ExecuteThread.run(Compiled Code)

I have the same requirement too. I have been looking at many sources and havent
come across any that mentions anything related to this. If you come across anything
please do let me know.
Regards
Vijay
"Licheng" <[email protected]> wrote:
>
I also face the similar problem. In our case, one of the business requirements
for the authentication process is that when a user is authenticated,
but his password
expires, the system should force the user to change password.
With JAAS and WebLogic 7.0, I don't know the standard or "preferred"
approach
to this problem
regards
Licheng

Chat Integration with WebLogic Portal 10.3

Hello Friends,
For one of my pre sale account, I am suppose to propose a chat integration with Oracle WebLogic Portal 10.3.
I was wondering if one can guide me as what would be the best possible option to consume? We are going to propose below Product stack -
Oracle WAS 10.3
Oracle WLP 10.3
Oracle Web Center Interaction (not sure about the version)
Vignette CMS 7.6
Need to know if there are any OOTB features in oracle product stack. If not, then need to understand the best possible solution for integration either as software or in SaaS model.
Appreciate your quick help on this point.
Thank you,
Regards,
Chintan

Bumping up the question,
Can somebody please guide me.
Thank you,
Regards,
Chintan

IBM Cognos 8 BI Integration with Weblogic portal

Hi,
In our project we need to integrate IBM Cognos 8 BI portlets with Weblogic portal 10.3.
1. How to integrate Cognos ?
2. How to enable SSO between Portals & Cognos? Cognos should use the portal users credentials for authentication
Please share me some useful links and sample code to proceed.
Thanks & regards,
Rajesh

Basically I am saying that your options are
1. Screenscraping the apps into portlets
2. Using SSO to login to the apps, but keepin them separate
3. Using Web Services to consume parts of the apps and exposing those as portlets
For our application we do 2 and 3. In many cases we just create portlets that represents views into other j2ee apps. When the users click on something, we launch the j2ee app in a popup browser. The users are already signed on, and taken to a specific detail page, add page or something within the app directly.
Hope this helps.
Kunal

Integration with Weblogic Server 10.3.x

Hello!
When I use mod_oc4j in OAS 10.1.2., then I can use the directive Oc4jMount configured OHS. If you use this directive html-code that is returned to the client will contain only the URL that hosts the portal. Get some opaque proxy (much like mod_rewrite's [P] flag).
Use mod_proxy, or mod_rewrite did not succeed - in html-code returned to the client portal to prescribe direct links to portlets.
My problem is that Oc4jMount can use ajp13, and my server with portlets (Weblogic) gives information via http.
Is there a way to mount http-resource in Oracle Application Server Portal 10.1.2?
Is this possible to use portal based on Oracle Application Server Portal 10.1.2 and portlets for this portal deployed on Weblogic 10.3.x ?
Thx for any information.

I've been trying to get this to work... No luck as of yet...
My problem now is that I get this exception when I don't have pitchfork-1.0-m5.jar on the my domains classpath.
<30.mar.2009 kl 17.37 CEST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
java.lang.ClassNotFoundException: org.springframework.jee.spi.PitchforkUtilsImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
Truncated. see log file for complete stacktrace
However if I put it on wls calsspath I get a AbstractMethodError:
<30.mar.2009 kl 12.59 CEST> <Warning> <EJB> <BEA-010065> <MessageDrivenBean threw an Exception in onMessage(). The exception was:
java.lang.AbstractMethodError: org.springframework.jee.intercept.CachingAdvisorChainFactory.getInterceptorsAndDynamicInterceptionAdvice(Lorg/springfr
amework/aop/framework/Advised;Ljava/lang/reflect/Method;Ljava/lang/ClassLjava/util/List;.
java.lang.AbstractMethodError: org.springframework.jee.intercept.CachingAdvisorChainFactory.getInterceptorsAndDynamicInterceptionAdvice(Lorg/springfra
mework/aop/framework/Advised;Ljava/lang/reflect/Method;Ljava/lang/ClassLjava/util/List;
I've tried various tips found http://forum.springframework.org/showthread.php?t=38361 and also tried setting the “component-factory-class-name” tag in weblogic-ejb-jar.xml and weblogic-application.xml but still get ClassNotFoundException.
Gaute

Portal integration with bo report was not opening from folders

Dear friend,
Please can u give me suggestion/solution on the following area, we are implementing business objects XIR2 portal integration with weblogic in which after login to business objects through portal report was not opening.
Regards
sekhar

hi,
please can you provide solution on this it is very urget purpose. i am able login to portal from portal when clicking on the report it was not opening.
regards
sekhar

5.1.3 U1 Testing with Weblogic 9

I am trying to test the 5.1.3 U1 release and its integration with Weblogic 9. I have setup the u1 logicalhost as follows:
-- Copied the wljmsclient.jar and wlclient.jar to the logicalhost/is/lib directory
-- Edited the logicalhost/is/domains/ferron2john/config/domain.xm l to have the <se-orb> tag be set to true.
These two changes were the changes that were needed to have 5.1.2 work with Weblogic 9. It is further documented in KB ID: 109088 that I created with support when initially setting up the logicalhost. I have also verified multiple times the credentials for the weblogic server by logging into the console. The exception that I getting is the following:
h6.
[#|2008-01-23T10:49:26.548-0600|WARNING|IS5.1.3|co m.stc.jmsjca.core.Activation|_ThreadID"; ThreadName=JMSJCA connect;stacktrace-id7;|JMSJCA-E01
Queue [qInvoiceToPs] on [t3://comtrac-test.alliant-energy.com:7001]: message delivery initiation failed (attempt #5); will retry in 10 seconds. The weblogic.jms.common.JMSSecurityException: Authentication failure due to LoginException
weblogic.jms.common.JMSSecurityException: Authentication failure due to LoginException
at weblogic.jms.frontend.FEConnectionFactoryImpl.conne ctionCreateRequest(FEConnectionFactoryImpl.java:66 )
at weblogic.jms.frontend.FEConnectionFactoryImpl_WLSke l.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicSe rverRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(Cl usterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicSer verRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject .doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Sec urityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest( BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(Bas icServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRe quest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.j ava:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java: 181)
Caused by: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User eai javax.security.auth.login.FailedLoginEx
urity:090302]Authentication Failed: User eai denied
at weblogic.security.providers.authentication.LDAPAtnL oginModuleImpl.login(LDAPAtnLoginModuleImpl.java:2 18)
at com.bea.common.security.internal.service.LoginModul eWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModul eWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.GeneratedMethodAccessor4464.invoke(Unkn own Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Del egatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at javax.security.auth.login.LoginContext.invoke(Login Context.java:769)
at javax.security.auth.login.LoginContext.access$000(L oginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginC ontext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(L oginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginC ontext.java:579)
at com.bea.common.security.internal.service.JAASLoginS erviceImpl.login(JAASLoginServiceImpl.java:91)
at sun.reflect.GeneratedMethodAccessor468.invoke(Unkno wn Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Del egatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.common.security.internal.utils.Delegator$Pr oxyInvocationHandler.invoke(Delegator.java:61)
at $Proxy17.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServ iceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl. java:88)
at com.bea.common.security.internal.service.JAASAuthen ticationServiceImpl.authenticate(JAASAuthenticatio nServiceImpl.java:80)
at sun.reflect.GeneratedMethodAccessor472.invoke(Unkno wn Source)
at sun.reflect.DelegatingMethodAccessorImp

WLS 9.2 requires Java 5, so you should use the JRRT download for Java 5.0, not 1.4.2.
Regards,
Henrik

OBPM integration with Documentum

Hi,
I have to do integration of OBPM with Documentum. I have search on internet about Documentum.but found nothing.
Do anyone have idea , how to implement this?
Thanx,
Vinit.

Hi Prashanth,
Document Content Server and Caching Server version 5.x can be easily integrated
with WLP81. DCTM has implemented the integration and you should look for "Documentum
Content Services for Weblogic" on their site. This basically ties the DCTM systems
to the Virtual Content Repository in WLP. At that point you can interact with
DCTM from portal tools, get content in and out, and navigate the content.
Regards,
--alex
"Prashanth" <[email protected]> wrote:
>
Hi All,
We are in the process of exploring the possibility of integrating WebLogic
Portal
8.1 with Documentum.
Reqmnts is to start with very basic level Documentum product ,which has
got content
workflow etc,which could be integrated with WebLogic Portal 8.1 sp2.
What Iam looking for:
1. The version of Documentum product (base level) which can be integrated
with
Portal 8.1 sp2.
Can somebody help me in this??
TIA,
Prashanth Bhat.

Coherence integration with oracle weblogic portal for Session management

Could you please let me know how to configure coherence integration with oracle weblogic portal for Session management. Its very urgent. please help.

Please take a look at the following web page -
http://coherence.oracle.com/display/COH35UG/Coherence*Web+Session+Management+Module
-Luk

Weblogic Portal integration with Lotus 8.5

Hello all,
I'm working on a project which involves building an intranet Portal and the customer has Lotus 8.5 which wants to integrate in the Weblogic Portal using wsrp portlets. More precisely they want to have in their portal the lotus calendar portlet, lotus mail portlet,lotus notes portlet, lotus sametime portlet ..etc. I found an old documentation and sample of this kind of portlets developed by Oracle but they don't work because of some errors when they try to retrieve the Lotus configuration. The documentation is this one : http://www.oracle.com/technology/products/ias/portal/point/lotusnotes/installation.html
I tried to find the authors of this documentation, or perhaps who developed the portlets and ask them if they can adapt the portlets for an integration between Weblogic Portale and Lotus Notes 8.5. If somebody knows about this topic or can help me with fixing the problem I have with the portlets please let me know - my e-mail is [email protected]
Thank you very much, your help is very much appreciated !

Hello,
First of all let me thank you Brad, for taking the time to answer, it's very nice of you. After I read you post I spent a couple of hours searching for the installer of the recommended "WebLogic Portlets for Groupware Integration". After searching everywhere I could possible search : OTN, E-Delivery, Metalink, ias.us.oracle.com I could not find the installer of this portlets. In the Installation Guide it says : " 2. Download the software from the Oracle Software Downloads site. " - there is nothing related to Portlets for Groupware on OTN.
Now, I'm ashame but I have to give up, I guess perhaps this portlets for groupware integration are bundeled into some kit with a different name, I don't know, believe me I tried to find them, I searched the documentation but with no luck.
I would be very thankful if you can point me to the installer of this portlets. Thank you very much again !

Weblogic portal Integration with UCM by weblogic virtual repository

Anyone has experience with Weblogic portal Integration with UCM by weblogic virtual repository? Thanks.

Since only folders_g can be used for integrating with Webcenter Spaces/Portal we are not sure of what our strategy should be. Is there plan to use framework folders with Webenter in the future?Certainly there are. Unfortunately, no exact date/release has been communicated so far. If you need a quick implementation (following few next months) I'm afraid you will have to go with folder_g

Issue while integrating external LDAP with weblogic

Hi,
i am trying integrating external LDAP (OpenLdap) with weblogic 10.3. I created a provider and provided required credentials and able to see users and group of the LDAP into the weblogic console. I am also able to login in the weblogic console with the users available in the LDAP after assigning the admin role to the ldap group. But i when i see the user's property (by clicking on the user in the admin console) it only shows the tabs for General, Password and Group only. on the other hand if i see the users from DefaultAuthenticator, it shows the Attribute tab apart from the General, Password and Group.
Can anyone let me knwo how can we get the Attribute tab for the Ldap users.
thx,
Ajay

Hi Ajay
By default Weblogic has READ ONLY adapters for any External Security Providers that are configured like any AD Providers. READ ONLY means, you can only read the data from the ldap but not modify it, hence may be its not showing the Attributes tag. For Default Authenticator, see the first paragraph note in Attributes tab, that says the same thing. NOW, may be WLS can atleast show Attributes in READ only format, but it needs some sort of mappings to be defined. Say on Weblogic side, we have like firstName, lastName which on any typical AD will be like sn (surname = lastname), givenname (firstname) etc etc. This mapping is tough to generalize.
One thing for sure is, from Weblogic you cannot modify or edit any attributes for any user in external AD. If you really want to get those attributes, you may need to use some javax.ldap apis or some 3rd party ready to use tools/apis. I remember Weblogic Portal has a facility to configure a xml file that defines attributes mapping and get all attributes for any user. But again thats in Weblogic Portal product and not part of weblogic server.
If you have any SOA Software, they have some utilities for the same.
Thanks
Ravi Jegga

QUESTION Re. Integrating TIBCO EMS with Weblogic 8.1 using MDB

Hi All,
          I am trying to integrate TIBCO EMS 4.3.0 with Weblogic 8.1 SP6.
          I have created a topic "SIMPLE.TOPIC" on the EMS. I have configured the Foreign JMS Server as follows:
          Name: TIBCO JMSServer
          JNDI Initial Context Factory:com.tibco.tibjms.naming.TibjmsInitialContextFactory
          JNDI Connection URL:tibjmsnaming://emshost:emsport
          I have configured the connection factory as follows:
          Name: TIBCO JMSTopicConnectionFactory
          Local JNDI Name: TopicConnectionFactory.Local
          Remote JNDI Name:TopicConnectionFactory
          User Name:username to connect to EMS server
          Password::pssword to connect to EMS server
          My JMS destination is configured as follows:
          Name: Tibco JMS Destination
          Local JNDI Name:SIMPLE.TOPIC.LOCAL
          Remote JNDI Name:SIMPLE.TOPIC
          My weblogic-ejb-jar.xml consists of the following code:
                    <weblogic-ejb-jar>
            <weblogic-enterprise-bean>
              <ejb-name>SimpleTopicListener</ejb-name>
              <message-driven-descriptor>
                <pool>
                  <max-beans-in-free-pool>200</max-beans-in-free-pool>
                  <initial-beans-in-free-pool>20</initial-beans-in-free-pool>
                </pool>
                <destination-jndi-name>SIMPLE.TOPIC</destination-jndi-name>
               <connection-factory-jndi-name>TopicConnectionFactory</connection-factory-jndi-name>
              </message-driven-descriptor>
              <enable-call-by-reference>True</enable-call-by-reference>
            </weblogic-enterprise-bean>
          </weblogic-ejb-jar>
                              The problem is, when I try to deploy this mdb, I get the following error:
          The Message-Driven EJB attempted to connect to the JMS destination with the JNDI name: SIMPLE.TOPIC. However, the object with the JNDI name: SIMPLE.TOPIC is not a JMS destination, or the destination found was of the wrong type (Topic or Queue).
          I have checked and double checked to make sure that the topic SIMPLE.TOPIC does exist on the EMS server.
          Does anyone know what is the issue here and how to resolve it?
          Many thanks!
          -Kinshuk
          Edited by kinshukk at 05/14/2007 8:35 AM

(1) Check the standard ejb jar and make sure you've specified a topic destination type (the default is queue). For details, you can reference the WebLogic 9.0 MDB developer guide (the MDB dev guide was revised in 9.0 to include more detail than the 8.1 guide). Also, you might want to take a look at our integration/interop FAQ (again for 9.0 or later).
          (2) Change the weblogic-ejb-jar to reference the foreign local JNDI names - not the remote JNDI names.
          (3) Be careful about using the "." and "/" characters in local JNDI names - these have side-effects in JNDI (they force creation of subcontexts).
          Tom

Integration of Commons Logging framework with Weblogic

Hi,
We are trying to use Apache commons logging framework and trying to publish log mesages in Weblogic so that messages can be seen through console and all the Logging configurations can be managed from Admin console. I tried using the below steps:
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/logging/config_logs.html#using_commons
But these does not seems to be working for User defined handlers. I am able to see the logs in the default odl-handler file but not able to log the messages through the handlers defined by me.
Can anyone help me on this.
Regards,
Anuj

Hi,
We are able to see reports through Workspace. We are facing problem after
integrating Hyperion Interactive Reporting with Weblogic Portal. we are able to see the sections like Query,Report,Results but we are not able to see the content after selecting any one of the section mentioned above.
System Configuration:
Hyperion Interactive Reporting 9.3.1
App Server: Weblogic server 9.2
Web Server: Apache 2.0.52
Database: Oracle 9.0.1.
Operating System: Windows 2003 with SP1
Browser: I.E 6.0
With Workspace everything is working fine. After Integration we are facing problem.
Regards,
S.Suresh.

Iplanet Integration with weblogic

Similar Messages

Maybe you are looking for