IPlanet-WebServer-Enterprise/6.0SP6 for JDK1.6 upgrade issue

I want to upgrade iPlanet Web Server 6.0 with JDK/jre 6.0. currently iPlanet Web Server 6.0 is refferring to JDK1.5.0_17 in our lab. I see following error in logs.Any ideas which state is this upgrade is valid or a resolution for the below error would be great.
I tried increasing stack size(StackSize 7168000 in magnus.conf),increasing Sun os filedescriptors and stacksize,jvm.minHeapSize=8388608 and jvm.maxHeapSize=33554432( in jvm12.conf)
Thanks in advance
iPlanet-WebServer-Enterprise/6.0SP6 B06/23/2003 14:40
[18/Dec/2009:09:44:27] info ( 3351): Installing a new configuration
[18/Dec/2009:09:44:27] info ( 3351): [LS ls1] http://stg-bobowww02.attws.com, port 9090 ready to accept requests
[18/Dec/2009:09:44:27] info ( 3351): A new configuration was successfully installed
[18/Dec/2009:09:44:27] config ( 3351): Error occurred during initialization of VM
[18/Dec/2009:09:44:27] config ( 3351): java.lang.StackOverflowError
[18/Dec/2009:09:44:27] config ( 3351):
[18/Dec/2009:09:44:27] config ( 3351): at java.lang.String.hashCode(String.java:1482)
[18/Dec/2009:09:44:27] config ( 3351): at java.util.Hashtable.get(Hashtable.java:334)
[18/Dec/2009:09:44:27] config ( 3351): at java.util.Properties.getProperty(Properties.java:932)
[18/Dec/2009:09:44:27] config ( 3351): at java.lang.System.getProperty(System.java:653)
[18/Dec/2009:09:44:27] config ( 3351): at java.lang.Class$3.run(Class.java:2897)
[18/Dec/2009:09:44:27] config ( 3351): at java.security.AccessController.doPrivileged(Native Method)
[18/Dec/2009:09:44:27] config ( 3351): at java.lang.Class.checkInitted(Class.java:2881)

Thanks for the reply.
curretnly i see from logs we have servicepack 6 for iplanet6.0 in my box. If i upgrade with new servicepack can i use JDK1.6? because i don't see that kind of statement with even in any of the documents.The documents only talk upto 1.4.2
secondly upgrading to newer version,I think for this we need to take new licences and is there will be a cost factor for 7.0 upgrade.Because i see the free download is only for 60 day evaluation. For upgradation i need to talk to my management for getting approval i need to atleast show them we cannot do it with the existing 6.0 server with SP6.
I use the default value intially,and i was getting the StackOverFlow error.Some sites suggested in increasing the stacksize value for remedy to StackOverFlow error.So i increased it in an increments of 1MB. And thought this would be the peak value and stopped over there.

Similar Messages

  • Release notes for iPlanet-WebServer-Enterprise/4.1SP7

    Hi,
    Where can i get the release notes, known bugs and fixes for iPlanet-WebServer-Enterprise/4.1SP7.
    Plesae reply back.
    Thanx
    Shiva

    Hi,
    You can find the release note for iPlanet Web Server SP7 from the following link
    http://docs.sun.com/?p=/doc/816-5676-10
    Srini

  • IPlanet-WebServer-Enterprise/4.1SP12 LDAP Limit

    Hi all,
    is it a licence limitation that the iPlanet-WebServer can't display only 1000 objects on a LDAP Server ?
    How can i extend this limit ?
    Best Regards
    Heiko Geist

    Hi,
    You can find the release note for iPlanet Web Server SP7 from the following link
    http://docs.sun.com/?p=/doc/816-5676-10
    Srini

  • Will iPlanet WebServer-Enterprise Edition work with Solaris 8?

     

    I think you should apply the latest service pack, iPlanet Web Server 6.0 SP9, and the latest Solaris 8 recommended patch cluster.
    iPlanet Web Server 6.0 SP9: http://www.sun.com/download/products.xml?id=41ca136a
    Recommended Solaris patch clusters: http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access
    If for some reason you can't apply these updates, you can eliminate the error messages by disabling Web Server's statistics collection functionality. To do this, comment out any lines in the magnus.conf configuration file that mention perf-init or stats-init. For example, you would change the following line:Init fn="stats-init" profiling="on"To comment it out, add a # at the beginning of the line:#Init fn="stats-init" profiling="on"

  • IPlanet-WebServer-Enterprise/6.0SP5 no response frequently

    Recently iPlanet has no response frequently, check the errors log, sometime it has this error,
    1) [27/Apr/2009:11:50:25] failure (42502): Error creating DaemonSession thread
    and sometimes, no error at all.
    Please help.

    It might be a late response but the reason you see Browser's default 404 page is IE has a check for 404 page and if this new error page you configured is less that 512 bytes IE will display its own default 404 page.
    The solution for your problem is to have your custom page to be bigger than 512 bytes.

  • Migration from iplanet webserver to Sun Directory Server

    Hi,
    I have Oracle Iplanet WebServer Enterprise edition V6.0 SP2 in my dev environment. I would want to migrate the system to Sun Java System Directory Server V6.0. I have looked up the migration guide for Sun DS V6.0. But i could not find any reference to Iplanet WebServers.
    Can anybody please let me know the migration procedure for migrating from Iplanet Server to Sun Directory server.
    Any help would be appreicated
    Thank you
    Nowfal

    Please ignore this question since we have dropped the plan to migrate, instead set a new DS instance from the beginning

  • JRun 4.0 initialization in iPlanet-WebServer fails

    We are facing problem with JRun 4.0 initialization in iPlanet
    Web Server 6.0SP9.
    Recently sun patch was applied with details as follows:
    NAME: Solaris 8 Recommended Patch Cluster
    DATE: Oct/04/06
    And after this we have observed the JRun 4.0 initialization
    fails reporting the following error in iPlanet error log:
    [16/Apr/2007:12:36:30] info (20514): successful server
    startup
    [16/Apr/2007:12:36:30] info (20514):
    iPlanet-WebServer-Enterprise/6.0SP9 B11/04/2004 06:35
    [16/Apr/2007:12:36:31] info (20514): jrNSAPI[init] reports:
    JRun 4.0 (Build 54102) NSAPI Extension - Oct 23 2002 11:10:21
    [16/Apr/2007:12:36:31] warning (20514): jrNSAPI[init]
    reports: initProxy failed to fetch server properties
    [16/Apr/2007:12:36:31] warning (20514): jrNSAPI[init]
    reports: could not initialize Server_1:172.29.27.86:51002
    [16/Apr/2007:12:36:31] warning (20514): jrNSAPI[init]
    reports: Couldn't initialize from remote server, deferring init
    till request time.
    [16/Apr/2007:12:36:31] info (20514): pssFilter: Init
    [16/Apr/2007:12:36:32] warning (20515): On group group1,
    servername prbpluww32.bp.com does not match subject "MANTA.BP.COM"
    of certificate Server-Cert.
    [16/Apr/2007:12:36:32] warning (20515): In secure virtual
    server https-prbpluww32.bp.com, urlhost prbpluww32.bp.com does not
    match subject "MANTA.BP.COM" of certificate Server-Cert.
    [16/Apr/2007:12:36:32] info (20515): Installing a new
    configuration
    [16/Apr/2007:12:36:32] info (20515): [LS ls1]
    https://prbpluww32.bp.com, port 443 ready to accept requests
    [16/Apr/2007:12:36:32] info (20515): A new configuration was
    successfully installed
    [16/Apr/2007:12:36:32] info (20515): Using the Solaris VM
    v1.2.2 from Sun Microsystems Inc.
    [16/Apr/2007:12:36:32] info (20515): Java VM classpath:
    /asera/apps/iplanet/servers/plugins/servlets/examples/legacy/beans.10/SDKBeans10.jar:/ase ra/apps/iplanet/servers/bin/https/jar/NSServletLayer.jar:/asera/apps/iplanet/servers/bin/h ttps/jar/NSJavaUtil.jar:/asera/apps/iplanet/servers/bin/https/jar/NSJavaMiscUtil.jar:/aser a/apps/iplanet/servers/bin/https/jar/servlet.jar:/asera/apps/iplanet/servers/bin/https/jar /servlet-2.3-filters-api.jar:/asera/apps/iplanet/servers/bin/https/jar/jsp092.jar:/asera/a pps/iplanet/servers/bin/https/jar/jaxp.jar:/asera/apps/iplanet/servers/bin/https/jar/crims on.jar:/asera/apps/iplanet/servers/bin/https/jar/xalan.jar:/asera/apps/iplanet/servers/bin /https/jar/jspengine.jar:
    [16/Apr/2007:12:36:32] info (20515): Loading
    IWSSessionManager by default.
    [16/Apr/2007:12:36:32] info (20515): IWSSessionManager:
    Maximum number of sessions is 1000
    [16/Apr/2007:12:36:32] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[1] reports: serverstore
    /asera/apps/jrun4/lib/wsconfig/1/jrunserver.store
    [16/Apr/2007:12:36:32] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[1] reports: bootstrap 172.29.27.86:51002
    [16/Apr/2007:12:36:32] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[1] reports: initProxy failed to fetch
    server properties
    [16/Apr/2007:12:36:32] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[1] reports: could not initialize
    Server_1:172.29.27.86:51002
    [16/Apr/2007:12:36:32] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[1] reports: Couldn't initialize from
    remote server, JRun server(s) probably down.
    [16/Apr/2007:12:36:33] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[57984] reports: serverstore
    /asera/apps/jrun4/lib/wsconfig/1/jrunserver.store
    [16/Apr/2007:12:36:33] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[57984] reports: bootstrap
    172.29.27.86:51002
    [16/Apr/2007:12:36:33] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[57984] reports: initProxy failed to fetch
    server properties
    [16/Apr/2007:12:36:33] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[57984] reports: could not initialize
    Server_1:172.29.27.86:51002
    [16/Apr/2007:12:36:33] warning (20515): for host 0.0.0.0
    trying to GET /, jrNSAPI[57984] reports: Couldn't initialize from
    remote server, JRun server(s) probably down.
    Finally we were forced to uninstall the sun patch and after
    that we didn't come accross with error. Are there any identified
    limitations with JRun on this sun patch? Can anybody help us in
    resolving this problem.
    Thanks,
    Mohan

    put classes12.jar path in jvm12.conf file of web server. You can configure this through GUI also. try renaming classes12.jar to classes12.zip also
    Ananda Rao

  • In iPlanet WebServer getRuntime.exec() not running

    Hi
    We are using iPlanet webserver 4.1 SP5 for unix.
    In the servlet in the init method the following command
    is not getting called
    Process ps = Runtime.getRuntime().exec("application");
    "application" is written in c.
    Even with the java class this is not called.
    Process ps = Runtime.getRuntime().exec("java sample");
    I have given the class path and path correctly.
    It is not throwing any exceptions also.
    But if i set the MaxProcs 4 in the magnus.conf file
    it is throwing java.io.IOException Badfile number
    I have set the CGIWaitPid on.
    I haven't given the cgi directory since we are not using cgi programs
    I could not understand whether this iPlanet web server does
    *support native interface
    *in unix will it create fork command to execute an
    application
    * do i have to change the setup in config files
    If any of you could clarify this it would be of great help to me
    Thanks in advance

    Even I am facing the same problem, but with Apache-Tomcat combination.
    Hope you have got the solution (being +ve 'cos its long since u posted it here), please write back to me                                                                                                                                                                                                                                                                                                                                                               

  • I am running Windows 7 Enterprise. I want to upgrade to a newer version of itunes. I click on help then click on check for upgrades. When I try to upgrade/install the upgrade for itunes it loads 52MB of the required 56MB and then just freezes ?

    I am running Windows 7 Enterprise.
    I need to upgrade my version of Itunes from version 7 to version 10 or 11.
    I go to Help and click on Search for Upgrades.
    I then select Upgrade Itunes.
    The system starts to upgrade and download the new software.
    It gets to 52.60 MB of 56 MB and then it just freezes / sticks and does not go any further ?
    I have tried to upgrade on a number of occasions but the same thing happens each time.
    Any help please ?

    Answer is in the original post.

  • Func_exec reports:  no handler function given for directive  in iPlanet webserver 4.1

    Hi,
    I am trying to run servlets on iPlanet webserver fasttrach edition 4.1 on Windows NT,The web server starts ok as well, but when I try to connect to it I receive a server error and the following messages are in the error log:
    for host 124.163.117.31 trying to GET /servlet/sample, func_exec reports: no handler function given for directive.
    could you please give me some solution for this.
    Thanks&Regards,
    Anne.

    means there is an issue with the the Init Loadmodules line. Normally, check the syntax, make sure the shared objects are where the web server thinks they are.
    If all is good, in unix, check to make sure the init line is all ONE LINE with no line breaks.

  • Windows 7 Enterprise to Windows 8.1 upgrade consumer edition

    Hi,
    It might be a silly question but I'd like to know if it's possible to upgrade from a Windows 7 Enterprise computer to a Windows 8.1 consumer license. I mean the regular not the Pro edition.
    I am currently running  W7 Enterprise 64Bit and I bought an ESD version of Windows 8.1 and I went through the download process but once I try to move on to the installation it just wont run. It doesn't show any error but the installation setup just
    disappears.
    Any help would be appreciated.
    Thanks.
    Alex.

    if you really plan to use Windows 8.1 enterprise in future you can upgrade to Windows 8.1 enterprise preview
    http://www.microsoft.com/en-us/evalcenter/evaluate-windows-8-1-enterprise
    but rather than made a risk, I suggest you just download full ISO and installed it on separate drive and have dual boot OS configuration, for some cases you maybe not able to revert back to Windows 7 enterprise after the upgrade to Windows 8.1 enterprise
    preview. So make it safe and clean

  • How can I connect to Oracle database from Iplanet webserver running on a Linux box and a database running on a Solaris box?

    Hi - I'm new to this group and wonders whether you guys can help me.
    I'm trying to connect to my Oracle9i database via a Java servlet but
    got the following error message in the web browser:
    Internal error: exception thrown from the servlet service function
    (uri=/servlet/HelloWWW6): java.lang.NullPointerException, Stack:
    java.lang.NullPointerException
    at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java:1743)
    at oracle.jdbc.oci8.OCIEnv.getEnvHandle(OCIEnv.java:69)
    at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:452)
    at oracle.jdbc.driver.OracleConnection.(OracleConnection.java:287)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance
    (OracleDriver.java:442)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:321)
    at java.sql.DriverManager.getConnection(DriverManager.java:512)
    at java.sql.DriverManager.getConnection(DriverManager.java:172)
    at HelloWWW6.doGet(HelloWWW6.java:40)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    com.iplanet.server.http.servlet.NSServletRunner.invokeServletService
    (NSServletRunner.java:897)
    at com.iplanet.server.http.servlet.NSServletRunner.Service
    (NSServletRunner.java:464)
    My class path is:
    Java VM
    classpath: /u01/iplanet/servers/plugins/servlets/examples/legacy/beans
    .10/SDKBeans10.jar:/usr/local/javamail-1.2/mail.jar:/usr/local/jaf-
    1.0.1/activation.jar:/u02/app/oracle/product/9i/lib:/u02/app/oracle/pr
    oduct/9i/jdbc/lib:/u02/app/oracle/product/9i/jdbc/lib/classes12.zip:/u
    02/app/oracle/product/9i/jdbc/lib/nls_charset12.zip:/u01/iplanet/serve
    rs/bin/https/jar/NSServletLayer.jar:/u01/iplanet/servers/bin/https/jar
    /NSJavaUtil.jar:/u01/iplanet/servers/bin/https/jar/NSJavaMiscUtil.jar:
    /u01/iplanet/servers/bin/https/jar/servlet.jar:/u01/iplanet/servers/bi
    n/https/jar/servlet-2.3-filters-
    api.jar:/u01/iplanet/servers/bin/https/jar/jsp092.jar:/u01/iplanet/ser
    vers/bin/https/jar/jaxp.jar:/u01/iplanet/servers/bin/https/jar/crimson
    .jar:/u01/iplanet/servers/bin/https/jar/xalan.jar:/u01/iplanet/servers
    /bin/https/jar/jspengine.jar:
    My LD_LIBRARY_PATH is:
    /u02/app/oracle/product/9i/lib:/u02/app/oracle/product/9i/jdbc/lib:/u0
    2/app/oracle/product/9i/jdbc/lib/classes12.zip:/u02/app/oracle/product
    /9i/jdbc/lib/nls_charset12.zip
    Can anyone help? This is currently driving me nuts. I was able to
    connect when I changed it to an application.
    I am using the Iplanet Webserver 6.0 on a Linux 7.2 platform. Like I
    said, sqlplus works fine, standard java application works fine but
    when I change it to a servlet (which means it now goes through the
    webserver, I get this error message)
    Does anyone know what the source code is trying to do at
    OCIDBAccess.java:1743 ?
    Thanks guys!

    Tony, could you please explain me better the procedure that you wrote?
    What are the boxes? My situation is similar:
    | ServerSocket (1) |
    | (192.168.1.100, 5555) |
    |
    |
    |
    |
    | Proxy |
    | Someone wants to connect to the ServerSocket (1) |
    That is not true. You CAN do it but you need a box
    outside the firewall with proper IP address to help
    you. I am not sure if Sergio still wants the answer
    today after more than a year from the original post (I
    did not see the post until today when I try to search
    for something else). Anyway, if such a box is
    available (I call it 2nd box), you could first
    establish a socket between the two boxes by HTTP
    tunneling (I assume it is a http proxy). You have to
    initiate the socket from the 1st box. Then start
    another server socket on the 2nd box, forwarding the
    traffic it gets from outside back to the 1st box using
    the established channel. That is it.
    Tony

  • Iplanet webserver 4.1 JSP problem

    Hi I am using iplanet webserver 4.1, whenever i change my jsp file, i have to restart my webserver instance otherwise ia gm getting error..is ther any way i can prevent to restart the webserver?

    this is the script.
    mv /logs/https-`uname -a`-443/access /logs/https-`uname -a`-443/access.yesterday
    compress /logs/https-`uname -a`-443/access.yesterday
    /opt/netscape/server4/https-`uname -a`-443/restart
    the moving and compressing works properly but the restart command doesn't actually kill the and restart the httpd process, and doesn't create the access or error log.
    The restart is a graceful restart will not ask for password, the same setting was working fine for a long time. it suddenly started to give this problem.
    the webserver is working fine(taking requests ,etc) except that the log files are not being written.
    i did a truss and the data collected is above i see that it is giving error #91 ERESTART many times
    there is another server with same settings which is working fine the only difference is that its patch level is lower.

  • WebDAv with Iplanet Webserver 4.1

    Hi,
    I want use Webdav with Iplanet Webserver 4.1 for publication . It's
    possible ?
    Regards,
    herve

    I tried this with apache slide.
    With no luck.
    I think the problem was due to not being able to configure a servlet to
    receive the http request for the urls from the web dav root.
    For example.
    http://mserver/dav
    may be the root
    then you would have a file at
    http://mserver/dav/files/etc
    I could not configure the servlet in the rules.properties file to say
    /dav/* is servlets WebdavServlet.
    However you can do this with tomcat and I hope now that iWS 6.0 supports the
    web.xml for deploying servlets that you now will be able to do this.
    If you get this working I would like to know how you did it.
    Warwick
    "herve Merdrignac" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    I want use Webdav with Iplanet Webserver 4.1 for publication . It's
    possible ?
    Regards,
    herve

  • While integrating Weblogic server with Iplanet webserver

    Hi ,
    I am facing issues while connecting weblogic application server with Iplanet webserver:
    while i hit the desired url, it showing the below log, it is not providing me proper page (weblogic console page )
    Sat Mar 23 06:12:37 2013 <1535513639993579> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
    Sat Mar 23 06:12:37 2013 <1535513639993579> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
    Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Date]=[Sat, 23 Mar 2013 00:42:37 GMT]
    Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Transfer-Encoding]=[chunked]
    Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Location]=[http://10.11.12.231/console/login/LoginForm.jsp]
    Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[X-WebLogic-JVMID]=[-420809910]
    Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
    Sat Mar 23 06:12:37 2013 <1535513639993579> parsed all headers OK
    Sat Mar 23 06:12:37 2013 <1535513639993579> sendResponse() : uref_p->getStatus() = '302'
    Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[date]=[Sat, 23 Mar 2013 00:42:37 GMT]
    Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[Location]=[http://10.11.12.231/console/login/LoginForm.jsp]
    Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
    Sat Mar 23 06:12:37 2013 <1535513639993579> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
    Sat Mar 23 06:12:37 2013 <1535513639993579> closeConn: pooling for '10.11.12.231/7001'
    Sat Mar 23 06:12:37 2013 <1535513639993579> request [console/] processed successfully..................
    Please help me.
    Thanks,
    Chinna

    Hi,
    First thing are you seeing any request coming to weblogic server? if not then,
    What configuration you have added in server.xml and virtual server instance object conf file for weblogic integration.
    It is pretty straight forward,
    1. add weblogic plugin libproxy_61.so in plugin/weblogic directory on webserver.
    2. add WLS cluster server/ standalone server information in server.xml
    3. in object file create a new object of type="magnus-internal/directory" add WL specific configuration and then add condition to select WLS object created or make it default object for handling all request.
    Thanks,
    Ranjan

Maybe you are looking for

  • Error messages after alternate plug-ins directory chosen

    After my initial install of the CS6 beta, which went quickly and flawlessly (I have learned to turn off my virus protection during install due to previous problems with installs of older versions of PS) I went to preferences and chose my CS5 plug-ins

  • Dreamweaver, Flash or both?

    Hi, I'm looking to buy a license for Creative Cloud within the next week or so and just had a question before I actually go for it. If I'm looking to create a website, is it possible to use a combination of Flash and Dreamweaver? What I was thinking

  • Monitor Calibration & Use Of Smart Fix In PSE 10

    Hi, I have a couple of questions about using PSE 10. First, I have an Iiyama ProLite E2409HDS monitor and it has a setting to put it into sRGB mode which I have read is better for viewing/editing photos. I use my computer for lots of different things

  • I can,t activate iphone 3gs after upgrade 6.1.2

    I can,t activate my iphone 3gs after upgrade 6.1.2.Now what i can do

  • The zend framework in FB4 works with PostgreSQL?

    Hi, first, I'm sorry if I'm in the incorrect forum jeje, i'm new in this forum. I would like to know if the zend framework in flash builder 4 can work with PostgreSQL, and if there's a tutotial about how to do. Thanks. Greetings.