IPMP Configuration problem in SUN 1290 Server

I am facing problem with IPMP Configuration.
server a is having configuration like :-
ce2  :- 97.241.213.152 - Physical IP
ce6  :- 97.241.213.163  - Physical IP
ce 2:1  :- 97.241.213.162  - Virtual IP
ce2: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3
inet 97.241.213.152 netmask ffffff80 broadcast 97.241.213.255
groupname ipmp1
ether 0:14:4f:95:c8:38
ce2:1: flags=9140843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,ROUTER,IPv4,NOFAILOVER> mtu 1500 index 3
inet 97.241.213.162 netmask ffffff80 broadcast 97.241.213.255
ce6: flags=9140843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,ROUTER,IPv4,NOFAILOVER> mtu 1500 index 7
inet 97.241.213.163 netmask ffffff80 broadcast 97.241.213.255
groupname ipmp1
ether 0:14:4f:95:c8:38
IPMP Is working Fine in this server
same way server b is having configuration :- (Here port ce2 was having problem so we have shifted to port ce1)
ce1 :- 97.241.213.154 - Physical IP
ce6 :- 97.241.213.165 - Physical IP
ce1 :1 :- 97.241.213.154 - Virtual IP
ce1: flags=19100842<BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,NOFAILOVER,FAILED> mtu 0 index 3
inet 0.0.0.0 netmask 0
groupname ipmp1
ether 0:14:4f:95:c8:60
ce1:1: flags=19140843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,ROUTER,IPv4,NOFAILOVER,FAILED> mtu 1500 index 3
inet 97.241.213.164 netmask ffffff80 broadcast 97.241.213.255
ce6: flags=9140843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,ROUTER,IPv4,NOFAILOVER> mtu 1500 index 7
inet 97.241.213.165 netmask ffffff80 broadcast 97.241.213.255
groupname ipmp1
ether 0:14:4f:95:c8:60
ce6:1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 7
inet 97.241.213.154 netmask ffffff80 broadcast 97.241.213.255
I know that in above configuration of server b there is some mistake but not able to find? Kindly provide proper configuration with command also.
I have attached hostname.ce1 output also for server b
######## hostname.ce1#############
serverb-DCN netmask + broadcast + group ipmp1 up addif serverb-ce2-test netmask + broadcast + deprecated -failover up
######## hostname.ce6#############
serverb-ce6-test netmask + broadcast + group ipmp1 deprecated -failover up

for the first system:
ifconfig ce2 97.241.213.152 deprecated -failover group ipmp1 up
ifconfig ce6 97.241.213.163 deprecated -failover group ipmp1 up
ifconfig ce2 addif 97.241.213.162 upfor the second system (server b):
ifconfig ce1 97.241.213.154 deprecated -failover group ipmp1 up
ifconfig ce6 97.241.213.165 deprecated -failover group ipmp1 up
ifconfig ce1 97.241.213.164 upMake sure you assiganed the deprecated and nonfailover flag to your physical ip(test ip) not the virtual ip.
and check your net work connection as well.
ce2 and ce6 on server a should in the same subnet.
ce1 and ce6 on server b should in the same subnet too.
Edited by: Alicia.tang on Aug 5, 2008 5:05 PM

Similar Messages

  • Problem with sun app server startup

    hi,
    i am getting problem with sun app server default start.the error is::
    [#|2006-03-01T13:54:35.121+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    now i am useing Win Xp operating system,
    show me a solution.
    Regs..
    Narasimha

    You haven;t specified the exceptions you r getting ........while starting your default server.
    if u r getting exception about InetClass then connect your system with LAN/Internet then your problem will be solved becoz i m using same location address as you specified, space doesn't matter at all - i think so, it is running fine........

  • Problem installing sun application server 8.2

    Hi,
    I couldn't still install the 8.2 version.
    However I'm trying to install it in Java 1.5.0._05 updated version?
    Is there a specific version of Java which is causing the problem?
    quoted from my previous email
    I tried to reinstall appserver on my localhost and i have a problem: when the installer copied files and start to confgiure domains the following error occured =>>
    INFO - unpacked jar file: activation.jar.pack
    INFO - unpacked jar file: appserv-assemblytool.jar.pack
    INFO - unpacked jar file: appserv-cmp.jar.pack
    INFO - unpacked jar file: appserv-ext.jar.pack
    INFO - unpacked jar file: appserv-jstl.jar.pack
    INFO - unpacked jar file: appserv-rt1.jar.pack
    INFO - unpacked jar file: appserv-rt2.jar.pack
    INFO - unpacked jar file: appserv-rt3.jar.pack
    INFO - unpacked jar file: appserv-rt4.jar.pack
    INFO - unpacked jar file: appserv-tags.jar.pack
    INFO - unpacked jar file: commons-launcher.jar.pack
    INFO - unpacked jar file: commons-logging.jar.pack
    INFO - unpacked jar file: deployhelp.jar.pack
    INFO - unpacked jar file: j2ee-svc.jar.pack
    INFO - unpacked jar file: j2ee.jar.pack
    INFO - unpacked jar file: jax-qname.jar.pack
    INFO - unpacked jar file: jaxr-api.jar.pack
    INFO - unpacked jar file: jaxr-impl.jar.pack
    INFO - unpacked jar file: jaxrpc-api.jar.pack
    INFO - unpacked jar file: jaxrpc-impl.jar.pack
    INFO - unpacked jar file: jsf-api.jar.pack
    INFO - unpacked jar file: jsf-impl.jar.pack
    INFO - unpacked jar file: mail.jar.pack
    INFO - unpacked jar file: relaxngDatatype.jar.pack
    INFO - unpacked jar file: saaj-api.jar.pack
    INFO - unpacked jar file: saaj-impl.jar.pack
    INFO - unpacked jar file: sun-appserv-ant.jar.pack
    INFO - unpacked jar file: xsdlib.jar.pack
    INFO - unpacked jar file: sun-as-jsr88-dm.jar.pack
    INFO - number of merged jar entries: 2671
    INFO - number of merged jar entries: 1425
    INFO - number of merged jar entries: 2459
    INFO - number of merged jar entries: 1169
    INFO - Start core server configuration.
    ERROR - default domain creation returned following exception:
    20.09.2005 12:29:21 com.sun.enterprise.pluggable.PluggableFeatureFactoryBaseImpl getInstance
    WARNING: Error loading pluggable features class com.sun.enterprise.admin.pluggable.PEClientPluggableFeatureImpl
    java.lang.ClassNotFoundException: com.sun.enterprise.admin.pluggable.PEClientPluggableFeatureImpl
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.sun.enterprise.pluggable.PluggableFeatureFactoryBaseImpl.getInstance(Plugga bleFeatureFactoryBaseImpl.java:104)
    at com.sun.enterprise.cli.commands.BaseLifeCycleCommand.createPluggableFeatureFact ory(BaseLifeCycleCommand.java:97)
    at com.sun.enterprise.cli.commands.BaseLifeCycleCommand.<init>(BaseLifeCycle Command.java:67)
    at com.sun.enterprise.cli.commands.CreateDomainCommand.<init>(CreateDomainCo mmand.java:65)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessor Impl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructor AccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
    at java.lang.Class.newInstance0(Class.java:350)
    at java.lang.Class.newInstance(Class.java:303)
    at com.sun.enterprise.cli.framework.CommandFactory.createCommand(CommandFactory.ja va:57)
    at com.sun.enterprise.cli.framework.CLIMain.invokeCommand(CLIMain.java:131)
    at com.sun.enterprise.cli.framework.CLIMain.main(CLIMain.java:46)
    20.09.2005 12:29:21 com.sun.enterprise.cli.commands.BaseLifeCycleCommand createPluggableFeatureFactory
    WARNING: SERVER0009: Pluggable features using class com.sun.enterprise.admin.pluggable.PEClientPluggableFeatureImpl could not be initialized. Server will run with default features.
    CLI130 Could not create domain, domain1
    INFO - End core server configuration.
    INFO - Start samples configuration.
    INFO - End samples configuration.
    INFO - Start Sun Java System Message Queue configuration
    INFO - End Sun Java System Message Queue configuration
    INFO - Start PointBase configuration
    INFO - Java home location configured
    INFO - End PointBase configuration
    More Information:
    Log File: C:\DOCUME~1\jk\LOCALS~1\Temp\Install_Application_Server_8PE_200509201227.log
    I get this error, however I deleted the folder c:\sun/AppServer before doing the installation.
    Can anyone please help
    The version is Java Sun App Server 8.2 version!
    Should i delete the file productregistry in the windows32 folder?
    Regards,
    Manisha

    I resolved the problem, the main reason was their was appserv-rt.jar file in the Java lib folder, once this was taken out, it worked perfectly.
    Manisha

  • Bug or wrong configuration of the Sun Ray Server+DTU+17" and 24" screenres.

    I have 2 DTU, one has a 17" screen with a resolution of 1280x1024 and the other DTU has a 24" screen with a 1900x1200 resolution attached. The setting of the Sun Ray server is configured only that registrated cards, can make an kiosksession to VMware View 4.6.
    When I start the DTU's, there is nothing wrong. The correct screen resolution is displayed on the screen for both DTU's. When I put a smart card into the DTU that has a 17" attached, it's indicates the correct resolution. The problem starts when I hotdesk to the other DTU with the 24" attached to, the session what was builded on the 17" will be showed on the 24". So the the resolution is 1280x1024. With this action there's nothing wrong, because the kiosksession is made on the 17" and no disconnection is made, so this is a correct resolution at this point. When I pull the card out of the 24" DTU, the screenresolution will be still at 1280x1024. It's looks like the setting will be saved on the DTU. Only a restart of a DTU will turn back the good resolution.
    When I do the same as the case before, but only I start at the DTU with 24" screen the kiosksession will start at 1900x1200. When I hotdesk to the Other DTU the kiosksession is still at 1900x1200, but only this time when I pull out the card out of the 17" DTU, The DTU will give the right screen resolution of 1280x1024
    the DTU's are Sun Ray 3 Plus, it doesn't matter which DTU's I place, the problems seems like that the DTU will save the last screen resolution. I got 300 of these DTU's and try a lot of them, but still the same issue.
    Note: with each case explained in this thread, the kiosksession will be started at first time, the kiosksession is not builded yet or has been disconnected.
    This behaviour is with a standard installation and configuration of Sun Ray server software 5.1.2. No extra script is implemented. Also I tried the UTRESIZE script that I've found on this forum, but it didn't helped.
    Is this problem a bug (known issue) or is this a wrong configuration of me? This is a big issue for me

    I have also a lot of fun with different screens, so I walk the "hardwired" mostly when I run into my screen does not look like correctly.
    utresadm -a -c MAC -t default 1280x1024@60 ... and then this is nailed, whatever you do with this box. Very effective especially for beamers ...
    what you can set, utresdef is your friend, utresadm -p show all the devices overwritten in case you need to change for a new monitor. And finally utresadm -d -c MAC -t default clears the setting.
    regards, thomas

  • JMS problem with Sun Application Server 8.2

    Hi!
    I've just started trying JMS and found a problem.
    I set a connection factory called "QueueConnectionFactory" in the Sun Application Server Admin Consol.
    After this I test this code:
    import javax.jms.*;
    import javax.naming.*;
    public class Sun_JNDI
    public static void main(String args[]) throws Exception
    Context jndiContext = null;
    System.setProperty("java.naming.factory.initial","com.sun.enterprise.naming.SerialInitContextFactory" );
    System.setProperty("java.naming.factory.url.pkgs","=com.sun.enterprise.naming");
    System.setProperty("java.naming.provider.url","localhost:1024");
    jndiContext = new InitialContext();
    Object O = jndiContext.lookup("QueueConnectionFactory");
    System.out.println(jndiContext);
    in result I got this long Exception message:
    2006.02.12. 10:52:59 com.sun.corba.ee.spi.logging.LogWrapperBase doLog
    INFO: "IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/1356"
    2006.02.12. 10:53:00 com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter
    SEVERE: RAR6001 : Class Not found : com.sun.messaging.jms.ra.ResourceAdapter
    2006.02.12. 10:53:00 com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter
    SEVERE:
    com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
    at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
    at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
    at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
    at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
    at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
    at javax.naming.InitialContext.lookup(InitialContext.java:351)
    at Sun_JNDI.main(Sun_JNDI.java:40)
    Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
    ... 7 more
    2006.02.12. 10:53:00 com.sun.enterprise.naming.SerialContext lookup
    SEVERE: NAM0004: Exception during name lookup : {0}
    com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
    at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
    at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
    at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
    at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
    at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
    at javax.naming.InitialContext.lookup(InitialContext.java:351)
    at Sun_JNDI.main(Sun_JNDI.java:40)
    Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
    ... 7 more
    Exception in thread "main" javax.naming.CommunicationException: serial context communication ex [Root exception is com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR]
    at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:317)
    at javax.naming.InitialContext.lookup(InitialContext.java:351)
    at Sun_JNDI.main(Sun_JNDI.java:40)
    Caused by: com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
    at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
    at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
    at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
    at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
    at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
    ... 2 more
    Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
    ... 7 more
    So I tested this code under Netbeans5 and I don't where to find jar file contains the class: com.sun.messaging.jms.ra.ResourceAdapter
    Other time I tryied to lookup this URL: "java:comp/env/jms/QueueConnectionFactory"
    The result was: javax.naming.NameNotFoundException
    I know it is a small code example but if I'm not able to solve this problem I can't go on with JMS.
    I would be glad by any help.
    Regards:
    Sandor

    Hello
    In my code it looks like that:
    1: System.setProperty("com.sun.jndi.ldap.LdapCtxFactory", "iiop://localhost:3700");
    2: Context ctx = new InitialContext();
    3: TopicConnectionFactory factory = (TopicConnectionFactory)ctx.lookup("jms/DailyDestinationFactory");
    4: TopicConnection connection = factory.createTopicConnection();
    5: TopicSession session = connection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
    6: Topic topic = (Topic)ctx.lookup("jms/DailyBean");
    7: TopicPublisher pub = session.createPublisher(topic);
    8: TextMessage msg = session.createTextMessage();
    9: msg.setText("NewMessage");
    10: pub.send(msg);
    and it work with Sun App Server 8.2.

  • How to configure tape to sun solaris server?

    Hi
    We have a tape "Quantum Super DLT 600 tape drive" connected to Sun solaris 9 and working properly.
    Now we want to connect and configure it to Sun solaris 10 server. I want to know how we can do it?
    I checked in st.conf file , "#tape-config-list=" is commented in both solaris 9 while in solaris 10 it is not there.
    I think i will just have to connect the tape to new srver(solaris 10) and do a reconfiguration boot. Right??
    Also, what do i need to do for connecting the tape back to solaris 9 server.
    Thanks

    You really don't need to reboot the server. Connect the tape to the server and type devfsadm -Cv. Then type dmesg and check whether Solaris detect the tape or not.
    if not do a reboot and see.
    after doing one of above, insert a tape to the tape drive and type "mt stat" and see you got any output about a tape.
    Refer Solaris 9 and Solaris 10 System Administration Guides.
    Edited by: Thusith.M on Jul 31, 2009 9:24 AM

  • Can't print under Tomcat but no problem under sun application server 8!

    Hi,
    I am rather puzzle by the fact that a programme written by me using all the print api and printable implementation when being called by the JSF page is capable of being successfullly print out when being deployed under sun application server 8 but got hang or met with no response when the same war file generated by the JSC 2 is being deployed onto Tomcat 5.17 .
    Was it due to some missing jar file or api , I really have no idea at all
    Any suggestion please ?
    Thank

    Hi,
    I got rather stupid question to ask regarding the font size.
    if I got a font size of 10, I know it is only refering to the height in pixel , my problem start when I need to know , how many characters can I print across in a A4 size paper. The pixel point is 1/72 of an inch, it is vertical .
    Is there any formula that I can use to determine how many characters per inch that particular font is supposed to print?
    Suggestion that I received is to use trial and error method.
    Thank

  • Configuring Realm on Sun Application Server 9.0

    Hi,
    I was able to configure file realm on Sun Application Server 9.0 . But after getting authenticated (login is success), in the server.log it generates the following log & does not allow me to navigate in my application .
    [#|2007-07-31T18:10:51.281+0530|INFO|sun-appserver-pe9.0|javax.enterprise.system.core.security|_ThreadID=14;_ThreadName=httpWorkerThread-8080-1;|JACC Policy Provider: PolicyWrapper.implies, context(jscreator/jscreator)- permission((javax.security.jacc.WebRoleRefPermission /faces/Index.jsp appadmin)) domain that failed(ProtectionDomain  (file:/jscreator/jscreator <no signer certificates>)
    null
    (principals com.sun.enterprise.deployment.PrincipalImpl "admin",
    com.sun.enterprise.deployment.Group "appadmin")
    java.security.Permissions@148853d (
    (java.net.SocketPermission localhost:1024- listen,resolve)
    (java.net.SocketPermission * connect,resolve)
    (unresolved javax.security.jacc.WebRoleRefPermission jsp appadmin)
    (unresolved javax.security.jacc.WebRoleRefPermission Faces Servlet appadmin)
    (unresolved javax.security.jacc.WebRoleRefPermission appadmin)
    (unresolved javax.security.jacc.WebRoleRefPermission XmlHttpProxy appadmin)
    (unresolved javax.security.jacc.WebRoleRefPermission default appadmin)
    (unresolved javax.security.jacc.WebRoleRefPermission ThemeServlet appadmin)
    (unresolved javax.security.jacc.WebUserDataPermission /faces/* null)
    (unresolved javax.security.jacc.WebUserDataPermission /:/faces/* null)
    (unresolved javax.security.jacc.WebResourcePermission /faces/* GET,POST)
    (unresolved javax.security.jacc.WebResourcePermission /:/faces/* null)
    (unresolved javax.security.jacc.WebResourcePermission /faces/* !GET,POST)
    (unresolved com.sun.enterprise.security.CORBAObjectPermission * *)
    (java.io.FilePermission C:\DOCUME~1\SRIDHA~1\LOCALS~1\Temp\\- delete)
    (java.io.FilePermission C:/sun/domains/domain1\lib\databases\- delete)
    (java.io.FilePermission <<ALL FILES>> read,write)
    (javax.security.auth.PrivateCredentialPermission javax.resource.spi.security.PasswordCredential * "*" read)
    (java.lang.RuntimePermission loadLibrary.*)
    (java.lang.RuntimePermission modifyThreadGroup)
    (java.lang.RuntimePermission accessDeclaredMembers)
    (java.lang.RuntimePermission queuePrintJob)
    (java.lang.RuntimePermission stopThread)
    (java.util.PropertyPermission java.version read)
    (java.util.PropertyPermission java.vm.name read)
    (java.util.PropertyPermission java.vm.vendor read)
    (java.util.PropertyPermission os.name read)
    (java.util.PropertyPermission java.vendor.url read)
    (java.util.PropertyPermission java.vm.specification.vendor read)
    (java.util.PropertyPermission java.specification.vendor read)
    (java.util.PropertyPermission os.version read)
    (java.util.PropertyPermission java.specification.name read)
    (java.util.PropertyPermission java.class.version read)
    (java.util.PropertyPermission file.separator read)
    (java.util.PropertyPermission java.vm.version read)
    (java.util.PropertyPermission os.arch read)
    (java.util.PropertyPermission java.vm.specification.name read)
    (java.util.PropertyPermission java.vm.specification.version read)
    (java.util.PropertyPermission java.specification.version read)
    (java.util.PropertyPermission java.vendor read)
    (java.util.PropertyPermission * read)
    (java.util.PropertyPermission path.separator read)
    (java.util.PropertyPermission line.separator read)
    (javax.management.MBeanTrustPermission register)
    (javax.management.MBeanPermission [com.sun.messaging.jms.*:*] *)
    Can anyone help me out..???
    Thanks in advance.

    http://forums.java.net/jive/forum.jspa?forumID=56&start=0

  • Installation/Config Problem with Sun Directory Server Control Center (6.0)

    Hi All,
    I have recently attempted an installation of Sun Directory Server EE 6.0 on a x86 Solaris 10 machine.
    I have selected to install Core Directory Server and Sun Directory Server Control Center with my installation.
    After installation, if I check the status of the SUNDSCC, I receive the following message:
    bash-3.00# ./dsccsetup status
    DSCC Application is not installed
    DSCC Agent is registered in Cacao
    DSCC Registry has been created
    Path of DSCC registry is /var/opt/SUNWdsee/dscc6/dcc/ads
    Port of DSCC registry is 3998
    I have also tried to re-start the Sun Java Web Console using the /usr/sbin/smcwebserver start command but that does not do anything.
    If i try to initialize the SUNDSCC usin the ./dsccsetup initialize command, the registry got created, but it still displays as "application not installed".
    I do not understand. I have already installed this application using the JES installer.
    please help!
    Regards,
    Saahil Goel

    I had a similar issue. Here is how I fixed it.
    Run dsccsetup status with the -v option. it will show you where it is trying to find the DSCC Application. Then do a find on your system to see where it is actually installed. Then simply copy it over to where dsccsetup is looking for it. Then do dsccsetup initialize. Below is what it looked like on my system when I did it:
    # ./dsccsetup status -v
    ## /usr/sbin/smreg is present
    ## /usr/sbin/smcwebserver is present
    ## /opt/server/sun/dscc6/dccapp is MISSING
    DSCC Application is not installed
    ## /opt/sun/cacao/bin/cacaoadm is present
    ## /opt/server/sun/dscc6/lib/jar/nquickmodule.jar is present
    ## Running /opt/sun/cacao/bin/cacaoadm list-modules -r
    DSCC Agent is registered in Cacao
    ## Running /opt/sun/cacao/bin/cacaoadm status
    ## Running /opt/sun/cacao/bin/cacaoadm list-modules
    ## Running /opt/sun/cacao/bin/cacaoadm get-param network-bind-address
    ## Running /opt/sun/cacao/bin/cacaoadm get-param jmxmp-connector-port
    ## /opt/server/sun/ds6/bin/dsadm is present
    DSCC Registry has been created
    Path of DSCC registry is /var/opt/sun/dscc6/dcc/ads
    Port of DSCC registry is 3998
    # find / -name dccapp
    /opt/server/dscc6/dccapp
    # cp -R /opt/server/dscc6 /opt/server/sun
    # ./dsccsetup dismantle
    DSCC Application is not registered in Sun Java(TM) Web Console
    Unregistering DSCC Agent from Cacao...
    Deleting DSCC Registry...
    All server registrations will be definitively erased.
    Existing server instances will not be modified.
    Do you really want to delete the DSCC Registry ? [y/n]y
    Server stopped
    DSCC Registry has been deleted successfully
    # ./dsccsetup initialize
    Registering DSCC Application in Sun Java(TM) Web Console
    This operation is going to stop Sun Java(TM) Web Console.
    Do you want to continue ? [y,n] y
    Stopping Sun Java(TM) Web Console...
    Registration is on-going. Please wait...
    DSCC is registered in Sun Java(TM) Web Console
    Restarting Sun Java(TM) Web Console
    Please wait : this may take several seconds...
    Sun Java(TM) Web Console restarted successfully
    Registering DSCC Agent in Cacao...
    Checking Cacao status...
    Deploying DSCC agent in Cacao...
    DSCC agent has been successfully registered in Cacao.
    Choose password for Directory Service Manager:
    Confirm password for Directory Service Manager:
    Creating DSCC registry...
    DSCC Registry has been created successfully
    Hope this helps.

  • Problems starting Sun Application Server 8.1

    I can not start my applications server, the following msg appears, what can I do?:
    SEVERE|sun-appserver-pe8.1_02|javax.enterprise.system.core|_ThreadID=10;
    |UnknownException during startup. Disable quick startup by setting system property
    com.sun.enterprise.server.ss.ASQuickStartup to false
    com.sun.appserv.server.ServerLifecycleException: [C4003]:
    Error al crear la conexi�n - interceptada java.net.ConnectException: Connection refused:
    no further information
    at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:427)

    If you have any firewall software running, turn it off and then try starting the server again. If that works, you'll have to allow the server to bind to the ports specified in <INSTALL>/domains/domain1/config/domain.xml in your firewall.
    -Ian Evans

  • Problem with Sun Directory Server 6.0 Console

    Hi,
    I posted same onto wrong forum earlier hope I am in correct place :).
    I have installed Sun Directory server on my Sparc box and now I am unable to start the management console. I followed some instruction on net and it say we have to refister the product using folowing command from dscc6/bin folder for installation
    System SnapShot_
    # ./dsccsetup initialize
    DSCC Application is already registered
    DSCC Agent is already registered
    Choose password for Directory Service Manager:
    Confirm password for Directory Service Manager:
    Creating DSCC registry...
    DSCC Registry has been created successfully
    *and it suppose to be started on https://Ip_address:6789 but its not. Can any one please tell me how to start the admn console to manage my directory server effectively.
    Note: I have already started the instance I have created during the installation using slapd-start script and its running successfully.
    Thanks,
    Sheeraz

    NOOOOO :( ..... Now i can see the login page.,.. Thanks mate.... Now when I am trying to log in using the UserName and Password I have supplied during the installation process (Sun Directory Server) it says Authentication failed.????
    This looks like a general webconsole... do I need to provide an specific URL for diretory server page ?????

  • JNDI problem with Sun Application Server

    I am trying to call a extremely simple EJB from a remote computer. But everytime I run the client I get a Class castException. I have used Weblogic and Jboss in the past and I never had any problem with JNDI. I included all the files except for the descriptor. Please help, this is driving me nut.
    Here is the exception i get:
    java.lang.ClassCastException
    at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:293)
    at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:134)
    at clients.testEjbTest.main(testEjbTest.java:42)
    The remote Interface :
    package ejb.test;
    import javax.ejb.*;
    public interface Test extends javax.ejb.EJBObject{
    public String getResult() throws java.rmi.RemoteException;
    The Home interface is:
    package ejb.test;
    import javax.ejb.*;
    public interface TestHome extends javax.ejb.EJBHome{
    public Test create() throws java.rmi.RemoteException, CreateException;
    The Bean is:
    package ejb.test;
    import javax.ejb.*;
    public class TestBean implements javax.ejb.SessionBean {
    public TestBean() {}
    public String getResult() { return "hello";}
    public void ejbActivate() {  }
    public void ejbPassivate() {  }
    public void ejbRemove() {  }
    public void ejbCreate() throws CreateException {  }
    public void setSessionContext(javax.ejb.SessionContext sessionContext) { }
    The client is:
    public class testEjbTest {
    public testEjbTest() { }
    public static void main(String[] args) {
    try{
    Properties env = new Properties();
    env.setProperty("java.naming.factory.initial", "com.sun.jndi.cosnaming.CNCtxFactory" );
    env.setProperty("java.naming.provider.url", "iiop://192.168.0.102:3700");
    InitialContext ic = new InitialContext(env);
    Object objref = ic.lookup("TestBean");
    Object tt = PortableRemoteObject.narrow(objref, ejb.test.TestHome.class);
    }catch(Exception e){e.printStackTrace();}

    Hi,
    I am new to this Forum.
    I have an application running on Weblogic.
    I want to shift to using SunOne as the Webserver and weblogic as application server.
    But when I deploy the application I am getting this ClassCastException
    at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow.
    java.lang.ClassCastException
         at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:293)
         at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:134)
         at com.elsevier.portal.admin.web.proxy.LoginProxy.getLoginSession(LoginProxy.java:156)
         at com.elsevier.portal.admin.web.proxy.LoginProxy.authenticateUser(LoginProxy.java:48)
        at com.elsevier.portal.admin.web.actions.LoginAction.login(LoginActi
    on.java:201)
         at com.elsevier.portal.admin.web.actions.LoginAction.execute(LoginAction.java:80)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java
    :1482)
          at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:
    525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
         at org.apache.catalina.core.StandardWrapperValve.invokeServletServic
    e(StandardWrapperValve.java:771)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
    warning: CORE3283: stderr: at org.apache.catalina.core.StandardHostValve.invoke(StandardHostVal
    ve.java:209)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
         at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)The code snippet is as follows�.
    protected LoginSession getLoginSession() throws ApplicationException {
    LoginSessionHome home = null;
    LoginSession object = null;
    try {
    home = (LoginSessionHome) (PortableRemoteObject.narrow(ProxyUtil.getEJBHome(getProperties().getProperty(DataCoreConstants.LOGIN_JNDI_NAME),getProperties()),LoginSessionHome.class));
    object = home.create();
    catch(ClassCastException cse){
    cse.printStackTrace();
    logger.error("Class Cast Exception is thrown while casting the Object to                      LoginSessionHome");
    logger.error(cse);
    throw new ApplicationException(ExceptionConstants.CLASS_CAST_EXCEPTION);
    return object;
    }Same method is running on weblogic without any problem�
    Help needed urgently.
    Regards,
    Neha.

  • Weblogic Plugin Configuration Problem -- no more in server list

    HELP! Has anyone seen anything like this before. What we are seeing
              is that the plugin sporadically sends requests to the wrong weblogic
              instance. When it sends it to the wrong instance we are seeing the
              following in the wlproxy.log. Like I said, this happens sporadically.
              Sometimes it will work just fine for an entire transaction. Does
              anyone know what the "no more in server list" means. We've had bea on
              the phone for the last 12 hours and they haven't been able to help us
              up to this point. If I need to send any more information please let
              me know....
              Thanks in advance!!!
              Jeremy Martin
              ========New Request: [POST
              /ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000
              HTTP/1.1] =========
              Wed Mar 20 08:45:14 2002 Content-Length=368 clength=0
              Wed Mar 20 08:45:14 2002 Going to get the post data of size 368
              Wed Mar 20 08:45:14 2002 SEARCHING
              id=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001]
              from current ID=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001]
              Wed Mar 20 08:45:14 2002
              @@@FOUND...id=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001],
              server_name=[p02n0310.it.sprintspectrum.com], server_port=[80]
              Wed Mar 20 08:45:14 2002 Init:
              availcookie=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              COLORS=spring; ZIPCODE=64119]
              Wed Mar 20 08:45:14 2002 PRIMARY 207.40.168.118:7001 no more in server
              list
              Wed Mar 20 08:45:14 2002 The request string is
              '/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000'
              Wed Mar 20 08:45:14 2002 After trimming path:
              '/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000'
              Wed Mar 20 08:45:14 2002 Now trying whatever is on the list;
              ci->canUseSrvrList = 1
              Wed Mar 20 08:45:14 2002 AttemptConnect(): Srvr# [1] =
              [207.40.168.115:7001]
              Wed Mar 20 08:45:14 2002 AttemptConnect(): Srvr# [2] =
              [207.40.168.13:7001]
              Wed Mar 20 08:45:14 2002 general list: trying connect to
              '207.40.168.13'/7001
              Wed Mar 20 08:45:14 2002 Connected to 207.40.168.13:7001
              Wed Mar 20 08:45:14 2002 Headers from the client [Accept]=[*/*]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Accept-Encoding]=[gzip, deflate]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [accept-language]=[en-us]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Cache-Control]=[no-cache]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Content-Length]=[368]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [content-type]=[text/xml]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Cookie]=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              COLORS=spring; ZIPCODE=64119]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [Host]=[rmsweb.intranet.sprintspectrum.com]
              Wed Mar 20 08:45:14 2002 Headers from the client
              [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)]
              Wed Mar 20 08:45:14 2002 Sending header to WLS [Accept]=[*/*]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Accept-Encoding]=[gzip, deflate]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [accept-language]=[en-us]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Cache-Control]=[no-cache]
              Wed Mar 20 08:45:14 2002 Sending header to WLS [Content-Length]=[368]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [content-type]=[text/xml]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Cookie]=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              COLORS=spring; ZIPCODE=64119]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Host]=[rmsweb.intranet.sprintspectrum.com]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [X-WebLogic-Force-Cookie]=[true]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [Proxy-Client-IP]=[207.167.161.73]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [X-Forwarded-For]=[207.167.161.73]
              Wed Mar 20 08:45:14 2002 Sending header to WLS
              [x-weblogic-cluster-hash]=[fw44lcQkjNI+PhjBPgtTl5Qwmi4]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [HTTP/1.1 200 OK]
              = []
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Server] =
              [WebLogic 5.1.0 Service Pack 11 11/20/2001 08:39:10 #149952]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Content-Length]
              = [622]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Content-Type] =
              [text/xml]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [X-WebLogic-Load]
              = [0]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Set-Cookie] =
              [WebLogicSession=PJigemmFCOSmpZvQ8VD8AEn7t7RtPEEbSQqarpCmUYbNZ5nhoL9j|-9091816865617485599/-819419123/6/7001/7001/7002/7002/7001/-1;
              expires=Sunday, 11-May-2003 06:45:16 GMT; path=/]
              Wed Mar 20 08:45:16 2002 Header received from WLS : [Connection] =
              [Close]
              Wed Mar 20 08:45:16 2002 Headers to the client [Server]=[WebLogic
              5.1.0 Service Pack 11 11/20/2001 08:39:10 #149952]
              Wed Mar 20 08:45:16 2002 Headers to the client [Content-Length]=[622]
              Wed Mar 20 08:45:16 2002 Headers to the client
              [Set-Cookie]=[WebLogicSession=PJigemmFCOSmpZvQ8VD8AEn7t7RtPEEbSQqarpCmUYbNZ5nhoL9j|-9091816865617485599/-819419123/6/7001/7001/7002/7002/7001/-1;
              expires=Sunday, 11-May-2003 06:45:16 GMT; path=/]
              Wed Mar 20 08:45:16 2002 r->status=200 returning 0
              Wed Mar 20 08:46:58 2002
              

    This one sound stricky. Have you checked all the usual suspects:
              -same cookie name in WB-INF/weblogic.xml and the cookiename set in
              plugin settings (defualts to JSESSIONID in 6.x)
              -network errors between web servers and WLS servers
              That utility can be invaluable in solving problems like this.I have seen
              session settings cause sessions to be lost, but never the message you
              are talking about. Try turning on the "DebugConfigInfo" setting and see
              what the "?__WebLogicBridgeConfig" page can tell you about your
              settings, what server list it is using and what servers are
              primary/secondary. One tip, you need to hit the WLS server one time, and
              then use the "?__WebLogicBridgeConfig". Until it communicates with the
              WLS server, it can only tell you it's own settings and not any
              information about up servers and primary/secondary assignements. Also
              look to make sure each server in the "Server List" has a blue ":OK" next
              to it to signify the plugin can see them.
              Hope that can help, though I am not sure they will deal with the problem
              you are seeing. Make sure you post the outcome to this issue, I will be
              very interested in seeing it.
              -Mark Vaughn
              Jeremy Martin wrote:
              >HELP! Has anyone seen anything like this before. What we are seeing
              >is that the plugin sporadically sends requests to the wrong weblogic
              >instance. When it sends it to the wrong instance we are seeing the
              >following in the wlproxy.log. Like I said, this happens sporadically.
              > Sometimes it will work just fine for an entire transaction. Does
              >anyone know what the "no more in server list" means. We've had bea on
              >the phone for the last 12 hours and they haven't been able to help us
              >up to this point. If I need to send any more information please let
              >me know....
              >
              >Thanks in advance!!!
              >
              >Jeremy Martin
              >
              >========New Request: [POST
              >/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000
              >HTTP/1.1] =========
              >Wed Mar 20 08:45:14 2002 Content-Length=368 clength=0
              >Wed Mar 20 08:45:14 2002 Going to get the post data of size 368
              >Wed Mar 20 08:45:14 2002 SEARCHING
              >id=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001]
              >from current ID=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001]
              >Wed Mar 20 08:45:14 2002
              >@@@FOUND...id=[207.40.168.13:7001,207.40.168.115:7001,207.40.168.34:7001,207.40.168.118:7001],
              >server_name=[p02n0310.it.sprintspectrum.com], server_port=[80]
              >Wed Mar 20 08:45:14 2002 Init:
              >availcookie=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              >CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              >CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              >COLORS=spring; ZIPCODE=64119]
              >Wed Mar 20 08:45:14 2002 PRIMARY 207.40.168.118:7001 no more in server
              >list
              >Wed Mar 20 08:45:14 2002 The request string is
              >'/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000'
              >Wed Mar 20 08:45:14 2002 After trimming path:
              >'/ra/controller/AuthenticationConversation/getAuthenticationXmlInfo?currenttime=03/20/2002%2008:45:12:548000'
              >Wed Mar 20 08:45:14 2002 Now trying whatever is on the list;
              >ci->canUseSrvrList = 1
              >Wed Mar 20 08:45:14 2002 AttemptConnect(): Srvr# [1] =
              >[207.40.168.115:7001]
              >Wed Mar 20 08:45:14 2002 AttemptConnect(): Srvr# [2] =
              >[207.40.168.13:7001]
              >Wed Mar 20 08:45:14 2002 general list: trying connect to
              >'207.40.168.13'/7001
              >Wed Mar 20 08:45:14 2002 Connected to 207.40.168.13:7001
              >Wed Mar 20 08:45:14 2002 Headers from the client [Accept]=[*/*]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Accept-Encoding]=[gzip, deflate]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[accept-language]=[en-us]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Cache-Control]=[no-cache]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Content-Length]=[368]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[content-type]=[text/xml]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Cookie]=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              >CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              >CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              >COLORS=spring; ZIPCODE=64119]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[Host]=[rmsweb.intranet.sprintspectrum.com]
              >Wed Mar 20 08:45:14 2002 Headers from the client
              >[User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS [Accept]=[*/*]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Accept-Encoding]=[gzip, deflate]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[accept-language]=[en-us]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Cache-Control]=[no-cache]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS [Content-Length]=[368]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[content-type]=[text/xml]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Cookie]=[WebLogicSession=PJZrt2jMA3CQTgvq2s31nz1Z1nh59Z81CQalCmaZLPWO2yVpAy71|6556818855266464983/-819419018/6/7001/7001/7002/7002/7001/-1;
              >CFID=17578; CFTOKEN=9604102; FULLACCESS=1;
              >CFGLOBALS=HITCOUNT%3D200%23LASTVISIT%3D%7Bts+%272002%2D03%2D06+10%3A52%3A38%27%7D%23TIMECREATED%3D%7Bts+%272001%2D11%2D03+17%3A29%3A44%27%7D%23;
              >COLORS=spring; ZIPCODE=64119]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Host]=[rmsweb.intranet.sprintspectrum.com]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[X-WebLogic-Force-Cookie]=[true]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[Proxy-Client-IP]=[207.167.161.73]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[X-Forwarded-For]=[207.167.161.73]
              >Wed Mar 20 08:45:14 2002 Sending header to WLS
              >[x-weblogic-cluster-hash]=[fw44lcQkjNI+PhjBPgtTl5Qwmi4]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [HTTP/1.1 200 OK]
              >= []
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Server] =
              >[WebLogic 5.1.0 Service Pack 11 11/20/2001 08:39:10 #149952]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Content-Length]
              >= [622]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Content-Type] =
              >[text/xml]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [X-WebLogic-Load]
              >= [0]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Set-Cookie] =
              >[WebLogicSession=PJigemmFCOSmpZvQ8VD8AEn7t7RtPEEbSQqarpCmUYbNZ5nhoL9j|-9091816865617485599/-819419123/6/7001/7001/7002/7002/7001/-1;
              >expires=Sunday, 11-May-2003 06:45:16 GMT; path=/]
              >Wed Mar 20 08:45:16 2002 Header received from WLS : [Connection] =
              >[Close]
              >Wed Mar 20 08:45:16 2002 Headers to the client [Server]=[WebLogic
              >5.1.0 Service Pack 11 11/20/2001 08:39:10 #149952]
              >Wed Mar 20 08:45:16 2002 Headers to the client [Content-Length]=[622]
              >Wed Mar 20 08:45:16 2002 Headers to the client
              >[Set-Cookie]=[WebLogicSession=PJigemmFCOSmpZvQ8VD8AEn7t7RtPEEbSQqarpCmUYbNZ5nhoL9j|-9091816865617485599/-819419123/6/7001/7001/7002/7002/7001/-1;
              >expires=Sunday, 11-May-2003 06:45:16 GMT; path=/]
              >Wed Mar 20 08:45:16 2002 r->status=200 returning 0
              >Wed Mar 20 08:46:58 2002
              >
              

  • Problem in sun web server : user-mapped section open

    Hi Friends,
    I am using sun web server7.0. When i am trying to update the struts-config.xml file through my application. I got the following error message.
    The Struts-ConfigXML couldn't be Modified Reason: C:\Program Files\SunWebServer7\https-java1.touchpoint.com\web-app\java1.touchpoint.com\gctnew1.0\WEB-INF\struts-config.xml (The requested operation cannot be performed on a file with a user-mapped section open)java.io.FileNotFoundException: C:\Program Files\SunWebServer7\https-java1.touchpoint.com\web-app\java1.touchpoint.com\gctnew1.0\WEB-INF\struts-config.xml (The requested operation cannot be performed on a file with a user-mapped section open)
         at java.io.FileOutputStream.open(Native Method)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:70)
         at java.io.FileWriter.<init>(FileWriter.java:46)
         at com.tps.datareader.SaveStrutsConfigXML.executeSaveStrutsConfigXML(Unknown Source)
         at org.apache.jsp.admin.saveStruts_jsp._jspService(saveStruts_jsp.java:157)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:917)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:345)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:403)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:311)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:917)
         at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:391)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:272)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:232)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:160)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
         at com.sun.webserver.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:149)
         at com.sun.webserver.connector.nsapi.NSAPIConnector.service(NSAPIConnector.java:995)
    Note : I am reading the file while i trying to update the file..
    Please help me to solve this issue....
    Thanks & Regards,
    Suresh Kumar.K

    Hi,
    I am seeing similar issue while configuring our deployed webapp on Windows.
    The container is WebServer 7 (bundled with JES5).
    C:\WebServer7\https-aaa.com\web-app\aaa.com\myapp\WEB-INF\test\xyz (The requested operation cannot be performed on a file with a user-mapped section open)
    From WS7 logs/errors file:
    [23/Apr/2008:17:02:15] warning ( 5280): CORE3283: stderr: java.io.FileNotFoundException: C:\WebServer7\https-aaa.com\web-app\aaa.com\myapp\WEB-INF\test\xyz (The requested operation cannot be performed
    on a file with a user-mapped section open)
    So i googled, found this thread and applied the workaround.
    Noticed that if we shutdown our WebServer, then we cannot configure our webapp.
    That page would not be accessed.
    Any suggestions to overcome this?
    tia.

  • Problems installing Sun Directory Server

    I downloaded the package install of the Directory Server Enterprise
    Edition 6.3. Made it through the install ok without too much trouble.
    When I run the command dsccsetup initialize, I get the following error:
    ld.so.1 dsadm failed: libnss3.so: version NSS_3.12 not found required by file /usr/lib/mps/libssl3.so.  open failed: no such file of directory.
    I found the file in /usr/lib/mps and then set my LD_LIBRARY_PATH to this folder but still get the error.
    Any ideas? Also I have tested the version 6 in the past and did not like the web part of it. Is there a place to download DS 5.2 for Solaris X86 still? I cannot find one anywhere? So if I am stuck with 6.x then I need to get it working as soon as possible.
    Thanks.

    what does this give u :
    pkginfo -l SUNWtls
    it seems you have a different tls version that the required one
    Edited by: Olivier_G on Jul 23, 2009 8:48 AM

Maybe you are looking for

  • HOW DO I KNOW IF THE DATABASE SERVER IS RUNNING?

    Hi guys, How do i write a java code to determine if my database server(s) (eg : Oracle or mySQL or postGRESQL, msSQL etc) are (is) running. I want to know how to code in java to determine if a certain database server is running when i start the java

  • Migrating SAP NetWeaver WebDynpro 7.0 Applications to WebDynpro 7.3/7.4

    Hi, We are trying to migrate applications from SAP NetWeaver Portal 7.0 to 7.4. The applications were created using SAP NetWeaver WebDynpro Java 7.0 and we're trying to import the Development Components (DC) using SAP NetWeaver Development Studio CE

  • Multiple Creative sound devices in one system

    -Multiple Creative sound devices in one systemrHello community, I recently tried to get two X-Fi Titanium PCI-Express cards to work in one computer. One card worked well. As soon as i plugged in the second card and booted the system, i got a quite re

  • Which structure (FPAYH or FPAYHX) to refer for DMEE

    Hi I am creating new bank file format in DMEE. I am in confusion which structure to use (FPAYH or FPAYHX) for following fields. Payee name, Payee address, Payee postal code, payee city, Payee country, Bank of the payee SWIFT ID, Payee bank name, Bank

  • Validation provider in CSV GTC in OIM

    Hi, We are trying to restrict status code coming from the feed file to 0,1,2,3 only. So, I am including a validation check - "Is in Range" and provide max limit as '3' and min limit as '0' and data type as 'integer'. But even if I provide status code