IPod Classic 80gb, 5/6th gen doesn´t work properly with Renault Media Nav?

Hello,
I really hope, anyone in here can I help me. Recently I got an new Renault including the Media Nav Radio System. I wanted to use an Ipod Classic 80gb, 5 or 6th gen. I connect it via USB an everything is fine. The problem that is annoying me, is that if I shut down the Radio by closing the doors with the key an start the Media Nav afterwards, the iPod everytime starts playing from the "All-Songs"-Playlist and not from the point of playback I was listening to, as I stopped playing music. The iPod touch 4g (8gb) in contrast works fine and without any problems.
My question now is: is it possible in general to use the iPod Classic properly or are the Software versions used in Media Nav and iPod incompatible?
Thanks a lot for your help!

So I had a similar problem on my 120 gig classic. After months of go around with the repairs department, we finally figured out the problem. ITUNES 9.0.3, KILLS THE HARD DRIVE on classics. What you need to do is get apple support to send you a REPLACEMENT, do NOT accept a repair, as they are idiots and only try to sync maybe one song, don't get the problem, and will send it RIGHT back to you, unfixed. Believe me, it is a Hard Drive issue. Once you get your new ipod, UNINSTALL itunes 9, and go back to using 8.2.1, it will work believe me. Hope this helps.

Similar Messages

  • I had an old iPod classic 40 gb, now it doesn't work anymore; I have to add a new one (iPod classic 60 gb) to my iTunes: could you tell me which is the right procedure?

    I had an old iPod classic 40 gb, now it doesn't work anymore; have to add another one (iPod classic 60 gb) to my iTunes (windows XP), which is the right procedure?

    Plug it in and follow the onscreen directions. That you previously had an iPod doesn't matter.
    (58889)

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • Firefox from version 3.6 to 11 beta doesn't work properly with gmail

    Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and  MplayerX and etc

    I face to this problem since new OS, Yosemite has installed on my mac book
    some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and  MplayerX and etc
    For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard  or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
    Please help me
    tq

    Same thing here with MPlayerX (annoying)

  • Google News doesn't work properly with Safari 5.1.4

    Has anyone else noticed that Google News doesn't work properly with Safari 5.1.4?

    Thank you for your response.  The more I use 5.1.4 the more problems I am seeing.  There are problems with images and layout.  I would like to back up to 5.1.3 but the system won't let me. At present I a looking for a solution, or I might just start using Firefox.

  • Safari doesn't work properly with Ebay

    Safari doesn't work properly when listing items on Ebay. Fix it.

    Hi Occo
    I would rather Apple updates Safari
    Then tell Apple, this a user to user forum, although I don't think Apple will update just for your problem as hardly anybody is experiencing the same issue, just a couple on this troubleshooting forum.
    this IS NOT A EBAY PROBLEM
    Please don't use all caps, it is considered shouting. No this may well not be an ebay problem, but it is not a Safari issue either, it is an issue on your Safari and on your computer. Everyone I know has no trouble with ebay at all. In fact Safari 4.0.4 has made it even faster to log in and browse, buy etc.
    id rather apple fixed their software
    Again, tell Apple, not us, through the Apple feedback page or file a bug report. They will update Safari if and when they decide, but it will not be to fix what is not broken.
    Im sure there would be similiar sites that arent compatible with safari
    I agree, as stated before that some sites are just lazy in updating their coding, usually not the high traffic sites though. Other sites only update their code for Windows IE and forget the rest of the world. Firefox, Opera, Camino etc. also can't access some sites.
    So in conclusion, try Safari and OSX maintenance and if that fails, then try an archive and install. Because there is nothing wrong with Safari 4.0.4 and ebay, or else this forum would be inundated with thousands upon thousands of users complaining and that is not the case.
    Cheers and Good Luck

  • IPod Classic (5th and 6th gen) with Apple Universal Dock - static fuzz?!?!

    I have been using my ipod classics with a Belkin input in the headphone jack for the last 6 months to my stereo. But I wanted a remote, so I picked up the Universal Dock. But ever since I got the dock, about 30 min into listening to music I get a static fuzz on the speakers. The fuzz goes away when I un-dock the iPod, then back again eventually once I re-dock. I never get the sound when I just use the line out from the iPod. I thought it was a faulty Universal Dock, so I exchanged it, but the same problem exists. Why?!?!?!?!
    Anyone else have a similar problem?
    I really want to continue using the Apple Dock, but the static spoils the deal

    I have the Classic 80gb also...same probem. I retuned the Apple Universal Dock and purchased one that was half the price. Pluged it in and it works perfectly! So my advice would be to save some money and get products that work.

  • In my ipod classic 60gb fifth generation: it doesn't work anymore music

    please anybody can help me!
    I've got an IPOD Classic 60gb 5th generation (year 2006)
    my radio support still working but i can't hear music anymore!
    why?

    Reset the iPod
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Have a nice day!

  • IPod Touch: apps (facebook, twitter, facetime) don't work properly with my wireless internet having worked perfectly before. Help needed!

    I got my iPod Touch 4g for Christmas 2011 and for the first 2 weeks everything worked fine - I could download apps; use apps to their full potential; use FaceTime; use everything.
    But after the two weeks, the iPod decided to no longer work as well as it had promised. First of all, it would take more than 2 hours to download a single app from the app store and then, straight after that, I couldn't connect to FaceTime (it had worked perfectly before). Then, finally, to top it all off - Facebook and Twitter stopped working on occasions. For example, I couldn't post/send messages or photos on Twitter and at the majority of the time, the News Feeds wouldn't load.
    Sometimes everything works but most of the time it doesn't. I've tried my iPod at every time of the day and it makes no difference - nothing still works! Also, I don't think it is the fault of my wireless internet because I've had an iPod touch before and it worked perfectly, and the laptop that I am writing this question on also works perfectly with wifi.
    The weird thing is that I have used my iPod to its full potential (everything worked fine) at my friends hosue on multiple occasions - using his wifi. I am really lost for ideas for what to do - I have uninstalled all the apps that don't work with the internet (facebook, twitter) and have always made sure that I have closed apps after using them, so that my iPod wouldn't run slow.
    My iPod has been like this for over a month now, help would be appreciated

    Do you have a blackberry data plan active. On your account? You need an active blackberry data plan to use the majority of data functions on your phone, even if you are connected to wifi 

  • Premiere CS4 doesn't work properly with Windows 7 trial - Please help!

    Hello!
    I have installed the trial version of Windows 7 on my laptop and now my Premiere CS4 doesn't play the timeline in real time anymore. It worked fine with Windows Vista. I have also installed the newest Premiere update, but it didn't help. Is there a patch for Windows 7 (64bit) or will I have to wait until the full version comes out and try it again then?
    Thanks in advance for your help.
    Rafiki

    It's a laptop and probably an older one, that means it is probably underpowered.
    It's a laptop and that probably means it is a single 5400 rpm disk which is inadequate.
    Bill,
    Probably good observations. I tend to loose sight of the fact that most laptops are not like mine and forget the common limitations. One mentions "laptop," and I see my Sager - duh! on me.
    To the OP, this ARTICLE might also offer some tips on getting your computer ready for an NLE session. Common references are to how things are done in XP-Pro (my OS), but you should be able to "read between the lines," and adapt the general concepts to Win7 and your setup.
    Also, giving full specs. on your laptop might help greatly, otherwise we're all just guessing. Bill brings up a couple of critical points. Your details will either point to them, or dismiss them.
    Good luck,
    Hunt

  • Droid bionic's touch screen doesn't work properly with firefox have to use opera

    once on Firefox, I have to tap on the screen links many times until it recognizes the touch. the screen will zoom in and out only. scrolling is slow but it functions. it's the touch that doesn't work

    For one thing, AT&T does not handle any iPhone repairs or exchanges under warranty so I'm not sure why this Apple rep told you to take the iPhone to an AT&T store regarding a potential warranty claim with the iPhone.
    What is going on? Is a $500 phone so sensitive that you have to keep it on a desk top like a computer to use it?
    No it is not. I've dropped my iPhone on concrete more than once without being in a case and one time included a bounce and skid across the concrete causing scratches on the back of the case. No problems whatsoever and I've dropped it a few times since I began using a case with no resulting problems either.
    http://www.youtube.com/watch?v=czCCavcnNd8
    But damage can occur depending on how the iPhone lands just as with any other cell phone.
    Since this is a potential warranty claim, I suggest making an appointment at an Apple Store if there is one nearby or call AppleCare (800) 694-7466 and handle this over the phone.

  • Flash Player Uninstaller doesn't work properly with Flash 12

    Hi,
    I've deployed many versions of Flash Player and have been using the generic Flash Player Uninstaller to remove previous version of Flash, followed by an install of the latest. This has been working great until the past few versions of 12.x. Flash Player 12 installs fine, the problem is uninstalling using "uninstall_flash_player.exe".
    Run the generic uninstaller
    Looks like Flash Player control panel icon has gone...
    However, it's still there in Add/Remove Programs and has left an mms.cfg with "AutoUpdateDisable=0" instead of the 1 I had set it to.
    The generic flash uninstaller used to remove ARP entries and pretty sure it also removed mms.cfg (or at least didn't change AutoUpdateDisable back to 0).
    Can this please be looked into and fixed?
    Thanks!

    Bug reports for Flash Player should be filed at https://bugbase.adobe.com/
    Please post the report number or link back here in the forum.

  • Zen Vision:m 30gb doesn't work properly with Windows 7 64bit

    I recently upgraded my pc from an old xp machine to a new one running windows 7 ultimate. Creative says their media player software that originally shipped with the zen does not support windows 7, so i should use windows media player (the version that ships with windows 7; i cannot find a help dialog box with the version number). Creative also says that the zen vision:m uses only microsoft MTP drivers, so I don't need to upgrade any drivers and it should be compatible. However, although the zen vision:m connects fine and I can see the mp3 files on the zen HDD, I cannot play them in the main windows media player screen. I can only double click on files and play them in the small windows media player window without any controls. Of course, I can't import any of the zen mp3 files into the music library in windows media player or set up any playlists. I checked every menu item and dialog box that i can think of on my zen and in windows 7, but nothing appears to be relevant to this problem. Any ideas, other than buying a brand new mp3 player? TIA

    When you connect it & open it WMP click on the SYNC tab of the program. Choose the files you want to sync to the computer then hit SYNC . The files should transfer to the computer. (check your settings as to where you want the files to go.)

  • Javafx webview doesn't work properly with google keywords tool

    Hi,
    I am trying to load https://adwords.google.com/o/KeywordTool in a javafx webview but I keep getting the following error:
    There was an error with your operation. If you were trying to make a change, it may not have saved. Please refresh this page to try again. If the error continues, log out of your AdWords account, then log in again and return to this page.
    The issue is not consistent - once every 10 tries it works. I read in another forum that the issue could be due to missing sunjce_provider.jar but it persists even if I add sunjce_provider.jar to the libraries in my Netbeans project.
    The test is as follows:
    public class TestBrowser extends Application {
    @Override
    public void start(Stage stage) throws IOException {
    StackPane root = new StackPane();
    WebView view = new WebView();
    WebEngine engine = view.getEngine();
    String uri = "https://adwords.google.com/o/KeywordTool";
    engine.load(uri);
    root.getChildren().add(view);
    Scene scene = new Scene(root, 800, 600);
    stage.setScene(scene);
    stage.show();
    public static void main(String[] args) {
    launch(args);
    Am I doing something wrong ? or missing something ?
    Thanks.

    Thanks for the reply.
    I don't think the problem is with webkit, qwebview from Qt4 works fine for the same site. I used the flag -Djavax.net.debug=all, but it didn't print any debug messages in the console ? I added -Djavax.net.debug=all to command line parameters in the Run dialog of my Netbeans project. Is that the right way to do it ?

Maybe you are looking for