Ipod classic latest version not recognized in itunes also downloaded 400 plus songs, can play them in itunes but can not download on to ipod any idears /

latest 6th gen 160 gb ipod not recognized in itunes, have done all the checks, has been confirmed in itunes sync, Also down loaded 470 new songs into itunes,Can play them,but can not down load back into my ipod, any thoughts? Question,

See my answer under "iPod 160GB not recognized". The steps I took to fix this problem include completely uninstalling and then re-installing iTunes 9.0.2, restoring my iPod to factory settings while in disk mode, following the Apple instructions of repairing the permissions (outlined in my other post), and even after all that my iPod "crashes" after syncing more than 300 or so songs. I hope that Apple will come out with a real fix for this problem soon. Best of luck.

Similar Messages

Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv

Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv
Thanks

What model of Mac? Mirroring will require a model from 2011 or later, running OS X 10.8 or later
About AirPlay Mirroring in OS X

I have found my old ipod (which was linked to itunes on a computer gone years ago w/ an itunes act I dont remembe). Currently the songs are visible and I can play them on itunes but I cannot sync them into my current library. How do I sync both systems?

I have tried to: sync the songs, organize the library and consolidate files, copy and paste songs
Nothing has worked so far.
Also when my ipod comes up in my computer, the songs are not present there.
Any help is much appreciated.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Not receiving emails, but can send them on desktop; but can do both on iPhone.

Ok, I have spent since a day or so since the first of this month trying to solve this issue. I use Hostgator, which shouldn't be an issue, but it seems to be. I have on my phone all my emails that are being hosted by hostgator set up as fetch, and it recieves my emails fine. My desktop though, can't. It can see the servers, and send emails, but it can't do anything but. It can't even download the emails I sent to myself, but when I go on web mail I can see them all.
My connection to the server is good:
But for some reason I can't recieve any emails from the IMAP server.
I put the computer is Safe Mode, and I could recieve the emails, but when I put it in normal mode, the emails don't download. I use Avast! Anti-Virus, I use SugarSync, I use Splashtop, And Free Memory Pro.
For web browsers, I use Crome, and Safari.
I use Apple Mail and Postbox, both can't recieve emails.
I can't imagine what is keeping my computer from downloading from the server.
Can someone help please?

I have not seen that review before and the only thing I take issue with is
the authors of Clam AV for Mac, apparently do not understand these concepts. Both the admin and limited user can only scan files w/in "<user name>/documents". 99% of the files on a Mac are outside of "/users/<admin>,<other user>/documents. What good is a antivirus scan, that has no access?
There is only one author and I can assure you that he fully understands the permission issues involved. He is committed to follow Apple security guidelines in this matter which say that even an admin user should not be able to see files and folders belonging to other users without their explicit permission. I realize that there is a lot of software that ignore this rule, including virtually all other A-V software vendors, but I don't think he will ever budge on that subject. I'm sure this same limitation applies to any other A-V software downloaded from the AppStore.
ClamXav will scan any file or folder that the current user has read access to. For an admin user this is by far the majority of the files on the hard drive, not the 1% indicated by the reviewer. For a limited user, that would be reduced to only files that are owned by that user and any other files readable by "everybody".
I realize that it has widely been suggested that users not routinely operate with admin rights, but I'm guessing the number of users that are actually practicing that are minimal. Novice users won't see that guidance and most of those that do won't be able to figure out how to accomplish that. Experienced users may give it a try, but quickly get tired of switching back and forth to do their admin duties. To me one of those admin duties would be to run ClamXav periodically to pick up anything that may have slipped by, especially when there is more than one user using the computer. Each of those other users should also be using ClamXav to inspect their own files. Of course a limited use user can use an admin userid and password if they know it to do installations, etc., so it is possible to slip something by.
In the case of the web site version of ClamXav, a limited user can run Sentry to watch all of the entry points to the computer, including the download folder, e-mail and any external drives he has access to. That should detect any currently known malware, including Windows, before it becomes an issue.
Lastly, as far as I have been able to determine, all the ClamAV® signatures are for malware that would be readable to an admin user and most by a limited use user. It would be a waste of time to look into the unreadable portions of the System (mostly the Unix sub-system) since there is no currently known malware that would exist there.
What bothers me is that it won't look at files beyond ownership? I know it sounds odd, but I do deal with some form of internet esponage at times due to the type of company I am working on building.
Again, you will be able to examine any files readable by you, any group you belong to or "everybody" as long as they are enclosed in a directory (folder) that you can access. Here's an example of a full hard drive scan I did just the other day as a test:
Scanned directories: 192387
Scanned files: 914610
Total errors: 692
The "errors" are almost certainly files I did not have read access to as an admin so I was able to scan 99.9% of the files I had access to.
Disk Utility tells me I have 1,150,506 files at the moment, so I scanned about 79.5% of them.

Searching Songs and Playing Them in iTunes

Hi guys,
I have a problem. When I do a search in the upper right hand box of iTunes, I get results. I would like to play my songs from this search. In Leopard, I would just let it run and the songs would automatically be ONLY from that search. However, ever since I upgraded to Snow Leopard, iTunes would follow the list in the 'All Artists' (as if I never did a search).
Does anyone know how I can fix this? Many thanks
Sid

While this does work, it used to work fine in the album grid view. Does anyone know of a setting that can change this back or what possessed Apple to change this to play songs not even shown in the main display list of songs?
It just seems like something that was common sense got messed up.

I have a iphone 3gs that I recieved from ATT and I bought on iTunes 3 ringtones that downloaded to my purchased folder and can play them there! but I can't use them as ringtones for some reason! why?

They downloaded and installed but not as ringtones but as music and I can't move them to ringtones no matter what I try! I download the rintones from iTunes.

I have an iphone 3g, when I try to download ringtones now I get msg indicating I need ios 5.0. Is 3g supported? I used to be able to download with no problem before. I bought my phone from att.

TS1369 Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.

Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.

I am having the exact same problem. My ipod has been stuck in disk mode for over two hours and now itunes is frozen.

I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution.

Dear sir,
I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution
Yours faithfully
Vineesh

Hello Vineesh
Try out the troubleshooting assisting below to get your iPod Classic to start syncing again properly.
iPod classic Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/classic/
Regards,
-Norm G.

I was on ios 6 beta version...then i restore my ipod to the 5.1.1, which is the latest version...now i m receiving the error in the icloud that "the last backup could not be completed"....so what i do....????

i was on ios 6 beta version...then i restore my ipod to the 5.1.1, which is the latest version...now i m receiving the error in the icloud that "the last backup could not be completed"....so what i do....????

You're obviously a developer. Repost your question in the developer's forum.

160GB iPod Classic (2007 version)

I have the 6th generation, 160GB iPod classic (2007 version). Whenever I get to 2 specific songs, they will only play for about 5-10 seconds and then skip to the next song. It doesn't do that when I play those songs on my Mac. I've done several complete restores of the iPod and it does it on the same 2 songs every time. I have about 113GB of music, video and photos on it. The interface is also very sluggish. Why won't Apple update the firmware on this thing? It's barely 4 years old, yet OS X 10.5 from that same year has received updates more recently than the last update to my iPod software. If the only real difference between mine and the newer models are Genius and Genius Mixes, why can't I use the latest software on mine? Is it really that hard to support a 4 year old iPod that I bought to support my large music library for many years? I'd eventually buy an iPod Touch to replace it, but not until it's big enough for my entire library (which won't happen for at least another year). Seriously Apple, where is the love?

There are basically two reasons why firmware gets updated.
It's unstable, so it gets an update to fix it. The Classic's firmware is stable, that's why it doesn't get updated.
To give the iPod more features. Perhaps the iPod Classic has all the features its hardware can cope with. As for Genius (which I do not use and have not even tried) - surely that's in iTunes, not on the iPod. Therefore, updating the iPod's firmware would achieve nothing and since you now state that you "don't even care much for Genius", why bring it up in the first place?
To turn on Genius (in iTunes), go to Edit/Preferences/General and turn on the tick box named Genius.
sigh...
Oh, and with 113GB of music on your iPod, I'm not surprised the interface is sluggish (or less responsive than with just 10GB of music).

My iPod classic has stop working and when ever i try to synch it there is a alert saying that do not disconnect it and there are some songs which when i try to play the iPod re-starts again so please tell me what is the issue

my iPod classic has stop working and when ever i try to synch it there is a alert saying that do not disconnect it and there are some songs which when i try to play the iPod re-starts again so please tell me what is the issue and some sound is comming from the back pannel .
so please do something about it and give me the solution
thank you,
Saajan jain

To give you something, I need something too, like
How old is the Ipod? (if it is still under warranty, then send it to Apple service shop)
Are you running Windows iTunes or Mac iTunes?
What do you see on the iPod screen?
My guess is, your iPod classic is more than 2 years old and out of warranty, and the hardisk has gone kaput! and need to be replaced.
Have a nice day!

Usic.. Nomy Ipod keeps going back to sad face... it wont power on, enter menu, play mthing. Does anybody else have this problem? This is about Ipod Classic/older version

my Ipod keeps going back to sad face... it wont power on, enter menu, play music,nothing. Does anybody else have this problem? This is about Ipod Classic/older version

+I tried various troubleshooting steps and each time when plugging the iPod in Itunes it starts up and it takes maybe 1 minute trying to recognize it when the computer crashes and reboots automatically going to the black screen and doing a file dump.+
I'm curious about this point. Is there any flash of a blue screen at any point here? (That's a more familiar sort of thing to be seeing prior to the system doing a restart after a serious error.)

How to transfer photos from iPod classic (earlier version) to my mc

I just brought a new imac and I am trying to transfer my photos from my ipod classic earlier version (software version 1.3, 30GB) to my iMAC.

The photos syned to the iPod are very low res versions of the original photos, optimized to fit on the iPod's small screen while taking up as little space in storage as possible. They are stored in a single special database file. You cannot use iTunes to transfer them to the Mac, and if you could, they would look bad blown up to a larger size on the iMac's screen.
There is a setting on the iPod's Photos screen in iTunes (a checkbox) that says Include full-resolution photos. IF that setting was checked when you synced the photos to the iPod, you can Enable disk use and find the originial full res photo files in the Photos folder (on the iPod).
Otherwise, you should transfer the original photo files from your previous computer, if possible.

I upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back?

i upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back? I tried using the shortcut for it and nothing happens. When I try to do it from the view menu, it shows up as something I can't click on. The new library format is driving me crazy and I just want to get back to the old library view.

We need to sort out some facts here first:
• You cannot be running Mt. Lion on your iMac G5. What Mac is it? What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
• What is the model of your Epson Scanner?
• Have you attempted to scan using Image Capture, located in your Applications folder?
• Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
1) partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
2) install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
[click on image to enlarge]

My sons ipod classic was left on all day and now has a red circle with a cross in it and will not work

my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??

Try to restore the iPod. Here's an article that provides troubleshooting for it.
http://support.apple.com/kb/TS1463
If that doesn't work visit an Apple Store and see if they can replace it.

Ipod classic latest version not recognized in itunes also downloaded 400 plus songs, can play them in itunes but can not download on to ipod any idears /

Similar Messages

Maybe you are looking for