IPod Classic pauses

I have 2 iPod Classics (160gb), one I keep at work and the other I use on the run.  Both devices start pausing on the same playlist and the same song, the back light illuminates, and I have to unpause manually.  As the music continues to play the iPod will continue to pause.  The longer I play, the more it pauses.  When I play the same playlist in my  iTunes, there is no pause.  I have tried re-syncing both iPods but the pausing continues.  Can anyone help? 

If this is always just one song, then I would suspect the song. Where did you get the song?

Similar Messages

  • My ipod classic pauses and unpauses spontaneously.

    My ipod classic pauses for one or two seconds and then begins playing again. This is extremely annoying and shouldn't happen with a $400.00 mp3 player. I listen to my ipod all day while at work. My ipod does this about 30 times throughout each day. Anybody know how to fix this?

    Try the 5R's here >  Apple - Support - iPod classic Troubleshooting Assistant
    Hopefully just a reset will help.

  • Connect to car, IPOD Classic pauses and will not play

    Hello to all,
    First of all I am not very good at computer stuff. I used my IPOD Classic for about three months with a car kit and all was fine. All of a sudden it stopped playing. I figured out that the IPOD pauses when it is connected to the wire from the car. I have tried connecting it with the car off, on, radio off, on all with the same result, as soon as the IPOD detects the wire it pauses. My radio will only play the IPOD not control it. Any ideas?? This is driving me mad. I don't understand why it worked for months and then suddenly stopped. Thanks in advance for any help.
    Matt

    I'm having the same problem. I updated my ipod in itunes and now my car's usb deck will not recognize the ipod. It had been working for years without a problem. I emailed kenwood and they said apple pushed out an update that is causing compatibility issues with car decks. They suggested a "soft reset" which did nothing. Kenwood told me to contact Apple and Apple wants me to pay for support. Guess I'll surf around this forum till I find a way to revert back to an older version of the ipod software.
    Here's the thread from kenwood:
    Dear Mr. Lapteff,
    Thank you for contacting Kenwood USA Corporation. We value you as a Kenwood customer and appreciate the opportunity to be of assistance.
    I understand you are having an issue with playing back your Ipod. If you recently updated your Ipod to the newer iOS4 software version we recommend attempting to soft reset the Ipod and attempt reconnecting to your head unit. The available updates from Apple have caused some issues with connectivity. For information on resetting your Ipod we recommend visiting www.apple.com.
    Please feel free to contact us again with any additional questions.
    Steve
    Product Support Representative
    Kenwood USA Corporation
    Area: Car & Home
    Topic: Troubleshooting
    First Name: andrew
    Last Name: lapteff
    Email: [email protected]
    Product Model: KDC-MP342U
    Zip/Postal Code: 19128
    Subject: Ipod won't play via usb
    Body: After working perfectly for years, my Ipod will not play on my KDC-MP342U for the last 2 weeks. The KDC-MP342U just flashes, "reading" but never syncs. I tried resetting and restoring my Ipod, but I still can't get it to work on my deck.
    Any help would be greatly appreciated,
    Andy Lapteff:)

  • 80 gig iPod classic pauses songs randomly

    So, I recently ran into a(n) annoying problem I had hooked up a aux cord to the ipod and when "locked" the ipod pauses randomly, knowing that it might be a connection problem I plugged my Bose earphones and it randomly pauses also. Any ideas?

    When you are listening to your iPod it reads data into working memory and then shuts down the hard drive when the buffer is full and plays back from memory. Before the buffer is completely empty the drive starts up again to read in some more data. There's a trade off to be made in this algorithm between battery life and occasionaly running out of data and it's possible that the classic firmware leans too much towards battery life. It's probably fine on a moderatly used disc, which isn't fragmented and where every sector reads on the first attempt. As the drive gets older some sectors may need two or three passes to get a good read. If one of these sectors is called at the beginning of a read cycle then the buffer may run out of data before a successful read leading to a pause. If the same track will play again without interuption then it's proably nothing too much to worry about but if a particular track rountinely causes problems that's of more concern.
    If you want to investiage the health of your iPod's hard drive read on....
    *Diagnostics Mode*
    Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
    Retracts: 889
    Reallocs: 12
    Pending Sectors: 0
    PowerOn Hours: 2202
    Start/Stops: 894
    Temp: Current 24c
    Temp: Min 10c
    Temp: Max 50c
    Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
    With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
    Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
    tt2

  • Ipod Classic pauses then restarts after two seconds

    I have Ipod Clasic 160 - recently it has started pausing then restarting within a second or two. It is mainly (but not exclusively) happening on lossless tracks. I have seen this has come before on teh forum - but not a definitive fix. I've tried the 5 Rs. Any ideas?

    Bump.

  • IPod Classic Pauses at 9 seconds on all songs NOT originally from iTunes?

    Recently any song I play that was not originally purchased via iTunes (stuff I had on my old PC for years that have always worked fine) pauses at 11 seconds. All of the songs I have purchased through iTunes and some of the songs I imported from CDs work fine. Is this a glitch in the newest iTunes software?

    Do you have anything installed that might be writing to the music file, for example an external program like Clutter which looks for artwork or pearLyrics (or similar widget) that looks for lyrics? If they are finding the information and adding it to the file as the song plays, it can cause a pause or stutter.
    Do you have a notification program such as Growl? I don't know enough about these programs to know why they cause a problem but the last time this question got asked, it turned out to be a notification program the name of which I've forgotten.
    iScobbler could be a culprit. Look for any helper applications for iTunes.

  • My iPod classic (160 gb) keeps pausing randomly in the middle of songs. What do I do to fix this?

    So, I got my iPod classic about 5 months ago. Every once in a while, it will pause in the middle of a song. This usually happens soon after I lock or unlock it, and if I touch the wheel, but also happens if I let it play without touching it.
    I've searched for solutions, but everyone says that their iPods keep pausing for a few seconds, then continue. When mine pauses by itself, it doesn't continue until I press the play button.
    According to iTunes, my iPod is updated with the latest software. So, I reset my iPod (middle button and menu at the same time), but it didn't fix the problem. Then, with iTunes, I reset my iPod. Again, this didn't help.
    It isn't because of my headphones because the same thing happened when I listened with different buds.
    Does anyone know what I should do?

    i to am having the same problem on my week old ipod classic did you manage to sort it out?? if so HELP please

  • Why does my iPod Classic keep pausing while playing music in a dock?

    Hi, can anyone help with this? I am playing music through the iPod Classic on a Philips docking speaker and every few minutes it pauses. This is so maddening, what can I do to stop it. Thanks

    From my own experience recently, I would suspect that the Philips dock is faulty. However, that won't get you very far, so as a method for narrowing down the problem, ask yourself the following:
    Has the iPod/Philips dock combination ever worked?
    How are you connecting the iPod with the dock? Is it the docking connector, a cable, bluetooth?
    How long does it work before it pauses (time it)? Is it the same time each attempt?
    Can you try the iPod with a friend's dock, or can you try the dock with another iPod? What happens?

  • My play/pause button on my Ipod Classic is not working, I am unable to turn off my Ipod or push play. Can this be fixed?

    The play/pause button on my ipod classic is not working, I am unable to turn off or push play on my ipod. Is there away to fix this?

    Do other devices now connect?
    Did the iPod connect before?
    What encryption/security is the router using?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I unplugged my iPod Classic without ejecting it first. It played for many hours after this but then it just stopped working and it has a blackened screen that seems to say paused. Wondering if there is a way to get it to work again.

    I unplugged my iPod Classic without ejecting it first. It played for many hours(about 8) after that but then suddenly stopped working and it has a blackend screen that seems to say paused. Wondering if there is a way to get it to work again.

    Hey hughborg25,
    I found an article that can help you troubleshoot when an iPod becomes unresponsive or the screen goes black:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    I would go through all the steps listed there, and the issue should be resolved by the end.
    Live long and prosper,
    David

  • I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?

    I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?
    May try DIY due to cost
    Just wondering if anyone's had this fixed how much it costs
    Or if it's another problem before I order parts

    I have found the solution for myself for the above.  I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!

  • Ipod Classic 80Gb regularly pauses while locked.

    Hi there,
    I've had this iPod classic for I think roughly 3-4 years now, but recently it's started to pause itself, sometimes every few seconds, requiring me to take ipod out of pocket, unlock, press play.
    It's always locked while in my pocket, headphones aren't loose and I've connected iPod to iTunes and restored to mfactory defaults but still the problem remains.
    Oh, and when it's connected to my speakers at home, it play's totally fine. Won't pause at all throughout a number of hours, yet in my pocket (this morning especially) it must have paused about 2-3 times each song.
    Help is greatly appreciated

    Sounds like the headphone detect mechanism has gone faulty. You might want to consider a third party repair service.
    tt2

  • NEW ipod Classic keeps pausing

    My iPod classic keeps pausing randomly, every 1-4 minutes. It happens in my car when it's plugged into the auxillary jack and when I use headphones. When I am listening with headphones, it sits flat on my desk and doesn't move at all and it still pauses.

    It may be related to the data "caching" used by iPods with a hard drive for storage.  This caching (pre-loading upcoming song data into memory) allows the iPod to play continuously, even if movement and vibration cause access to the iPod's hard drive to NOT be continuous.  However, if the iPod is stationary on a desk, this should not happen.
    If you have not already, Reset (restart) the iPod
    http://support.apple.com/kb/ht1320
    If that does not help, you may want to do a Restore on the iPod using iTunes.  The cause may be data corruption on the iPod's storage.  The Restore button is on the iPod's Summary screen in iTunes.  This will erase the iPod, reinstall its software, and set it to default settings.  After the Restore, sync your songs as before, and see of this problem still recurs.
    It's also possible that the iPod's hard drive is faulty, and that is why the iPod is having problems accessing the song data (which causes these pauses).  If the Restore does not resolve this problem, you should have it looked at under warranty.  If there is a conveniently located Apple Store, you can make a reservation at the store's Genius Bar.  OR, if possible, return it for a full refund and get another one.

  • Ipod classic won't charge, 3sec pause every 3rd song, play/pause not work

    clearly i have a problem. it's just over a year old and has suddenly started to malfunction. tried resetting obviously to no avail. first i noticed the play/pause didn't work but can get around this, then noticed it wouldn't charge as normal - given 24hrs plugged into mains it only charge half way - and as soon as you use it all all it's in the red again. also about every 3rd song the music stops for about 3seconds - then resumes - it does this even when plugged into a power source. HELP i'm travelling in SE asia for the next 3 months and can't have it die on me as it functions as hard drive for my travel photos too!!

    What I did was buy a mains charger from ebay,they cost about a £1 or £2
    plus about £3 postage,it works great,at least now I dont need to use a PC to
    charge it up i.e on holidays or at work.
    P.S type this into the ebay search bar "ipod Classic mains charger"
    then change to "lowest first" on the right of the page.
    Hope this helps

  • First song on all albums on my iPod classic timing pauses causing click wheel to freeze. Why?

    I have a iPod classic 120g 6th generation, and have no major problems since I recieved a replacement one back in 2011 when the hard drive went bad. Just recently my iPod has sbeen freezing at the 2 second of every first song on every album on my iPod. This is causing my iPod's click wheel to become unresponsive for at least 30 seconds everytime. Can this issue be fixed or not without me purchasing a 7th genration one? It will be my fifth ipod if I do have to.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Maybe you are looking for

  • Downloading brushes from a collaborated library.

    Hi I am using a pc, I had a previous adobe account and had made a bunch of brushes and shapes I signed in to that account and clicked collaborate, I entered my new adobe account email and sent the invite. I signed back into my new account and it show

  • Variable in SAP SCRIPT

    Hi Guys, I want to print a variable Value from Print Program to SAP SCRIPT, I tried to print it in between && but they still dont have any value while debugging SAP SCRIPT and not also in print out....Suggest somthing. Cheers....!! Sid

  • Automatically assign user roles on user creation

    Hi, I have a scenario where i am creating database users in Oracle database and we need that no matter from where the database users are created they have a couple of roles automatically assigned to them. How can this be done? Quick response will be

  • Why do we use ejbCreate() method? what does it returns?

    why do we use ejbCreate() method? what does it returns?

  • Issue with Business object add ........ VB6, SAP 2004A, SQL Server2000

    my scenario is this, I am creating a business partner when an item is added , my business partner gets created but not the Item. The Item is created manually by the user, and the on the Click event of the Add button I create the Business partner. I c