IPod Classic skipping/stopping when using Infiniti M37 factory installed dock
We have 2 Infiniti M37s and when I use my iPod Classic in either one, songs will skip/stop during play (happens randomly and not with the same song each time and the frequency differs, too) and then resume, though all songs play without skipping/stopping when I use my Bose headset (not in the car!). It happens on all road surface types and, thinking it may have been the cable, have used 3 different cables to connect from the car dock to my iPod. Same problems. I had a Toyota before and never had this problem with with the same iPod. Help?!!! Thanks.
This most likely won't completely solve your problem and you might've already tried it, but try restarting your iPod. It might just need a rest! To do this, press the Menu and center button on your iPod until it turns black and then restarts itself. (You'll know it's restarting when you see the apple come up on the screen.)
Similar Messages
-
IPod Classic video stops when plugged into external speakers
Whenever I'm playing video and plug my iPod Classic into external speakers (doesn't matter the speakers, it happens with all of them), the video stops playing and the screen behaves as if I'd pressed the "Menu" button. Extremely annoying when playing video playlists.
Any help will be greatly appreciated. Thanks.Yep, it's through the dock. I don't get why Apple keeps "updating" and taking away features. It happened when at first you could shuffle "songs" and "videos", and the videos would play as such. Now they play as "songs", only audio without video.
-
I use an ipod classic 120G. When I try to launch itunes I first of all see a box stating "The registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes" This I have done. obviously I cannot burn CDs but worse still is my ipod is not being recognised by itunes and will not sync. I have not installed any new burning softeware. Any suggestions please?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
my iPod classic has stop working and when ever i try to synch it there is a alert saying that do not disconnect it and there are some songs which when i try to play the iPod re-starts again so please tell me what is the issue and some sound is comming from the back pannel .
so please do something about it and give me the solution
thank you,
Saajan jainTo give you something, I need something too, like
How old is the Ipod? (if it is still under warranty, then send it to Apple service shop)
Are you running Windows iTunes or Mac iTunes?
What do you see on the iPod screen?
My guess is, your iPod classic is more than 2 years old and out of warranty, and the hardisk has gone kaput! and need to be replaced.
Have a nice day! -
My ipod classic has stopped working, won't even charge. why?
my ipod classic has stopped working suddenly and now switch on or charge, any ideas?
The community need more info, from you to be of any help.
Stopped working?
1. What do you see on the iPod screen?
2. When was the last time you charge it successfully?
3. How old is your iPod?
4. What version is your iPod?
5. When was the last time your iPod was working?
6. Are you using a Mac or Windows iTunes?
7. Which version of iTunes are you using?
As you can see in the discussion list, some Post don't get a response, as the regulars don't know how to help without the relevant info.
Have a nice day! -
Ipod classic 30G stops playing some tracks
ipod classic 30G stops playing some tracks. Starts again when I skip to next track.
Do those SAME tracks play play properly and completely when you play them in iTunes (on your computer)?
-
HT1320 why does my iPod classic freeze up when i plug it in to my computer
why does my iPod classic freeze up when i plug it in to my computer
It's not a "fix," actually. If that is a 4th gen iPod connected using USB, you need to do what it says and plug it in to the white square power adapter that originally came with those models. Later Apple power adapters should work; third-party adapters may or may not work. It has something to do with voltage. The USB connection to computer does not provide the required voltage (although it's obviously fine for normal syncing and charging).
If that iPod is connected to a FireWire port, it apparently provides the required voltage, because that step does not come up during the Restore. That model was a transition between iPod connecting to FireWire and connecting to USB. Earlier models required FireWire. Later models only used USB.
If you don't have an adapter, and there is an Apple Store nearby, I guess you could take it to the store's Genius Bar. I'm sure they have a power adapter there, to complete the Restore. (Just don't let them re-do the Restore on a Mac, if you use a Windows PC. Different storage formatting.) -
Why does my ipod classic keep ejecting when I connect it iTunes?
My Ipod Classic keeps ejecting when I connect to my MAC, why?
both my ipod touch 4th gen and my iPad Air is not detected., i have tried checking the USB cables,. and the Apple Mobile Device (Stop/Start Service from Computer MAnagement) in Windows 8.1 iTunes 11.1.5 is not detecting the devices,., i have check already for all updates,. nothing happens.,., but WIndows does detect the devices only itunes does not
-
My podcasts will no longer sync with my ipod classic. Also when I tried to sync in itunes, the category "podcast" disappeared under my ipod listed in itunes.
Are you sure your iPod Classic is configured to sync podcasts to your device? You'll want to double check by taking a quick look at your iPod's Podcast configuration tab in iTunes.
To access this tab, plug your iPod in and click on it from under the Devices section in the left hand pane of iTunes when it appears to bring yourself to the iPod's Summary tab. Now locate the Podcasts tab and select it. Under this tab you can configure how and what podcasts are synced to your device. If you make any changes, be sure to click theApply button in the lower right hand corner.
B-rock -
I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button .
Try connecting it to another PC, if it is ok, then your PC has some software conflict with iTunes.
If it hangs other PC also, then your iPod Hardisk, maybe bad.
Do the disk diagnosticas posted earlier by tt2, to check the health of your Hardisk.
Have a nice day! -
hello my name is vicky i have an ipod classic 160 gb when im syncing songs to ipod classic it is get stucked and a small noise is coming from back endof the ipod i even checked the number of reallocs and pending sectors so please help me......for this
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
my ipod classic 170gig disconnects when i open itunes? any ideas? It only happened since i uploaded new itunes version?
The point is that there are four i product users for one computer in my house, and not everyone wants the same music on their device. Like I said before, the ipod is not syncing to the new library even though I plug it in when the new itunes library is pulled up. It keeps syncing to the old library...
-
160 gb iPod Classic says it must use iTunes 9 or later. 120 gb iPod Classic (wifes) is on 8.0 and doing fine. If I install iTunes 9, will both iPods be o.k.? Will any music be lost? THANKS
You can either burn it to a CD or DVD from within iTunes, or back up the entire iTunes library as you would any other folder.
(84357) -
IPod classic 160GB freezing when plugged in
Hi,
My new iPod classic started freezing when plugge in after the night, for example - it needs a restore, then works fine. Any ideas?
Thank you for your helpYikes!, it may means it is the iPod Classic firmware 2.0.4, that is hanging up the USB Host controller, which freezes your whole Computer.
Could be a partially updated firmware 2.0.4, (so kind of corrupted)
Can you
1. Open in finder <yourname>/Library/iTunes/iPod Software Updates/
2. Remove the .ipsw and .ipsw.signature for the version you are wanting to drop, in this case, 2.0.4
3. Open iTunes and in Preferences uncheck automatic check for updates.
4. Connect iPod and select restore. It will ask you if you want to check for newer update. Select Yes. All files will be removed and it will have to resync the entire library but it worked.
PS: try and do this in Diskmode. -
my ipod classic 160gb stopped playing and has a lock at the top of it. none of the functions work and it won't sinc to itunes. my computer doesn't recognize it and showed a message of "windows has stopped this device because it has reported problems (code 43)". any suggestions?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
Maybe you are looking for
-
I've ripped songs from CD's into a folder on my hard drive and named the folder "Ripped". I ripped them as MP3 files. Then I added those songs into my iTunes library. Are those songs copied into the iTunes library into some directory somewhere? Or ar
-
Error message while using formula in a Ifthen function
Hi all, I have a problem with IfThen (or If) function in Financial Reporting. I add a formula column and write this simple function. IfThen([A]=[A],[A],0). It returns #ERROR. I have tested the same function in another environment. It works fine. I do
-
I am running iphoto 6.0.6 and after a recent update my library shows "no photos" but if I look in the files they are all there. How do I get iphoto back to recognise them. Note it will not let me import them.
-
Using CS3 DW, im making a website for a friend for his auto sales/ business. Ive created templates using a DW template and modifying it. He has a URL (below) on cars.com. He wants to embed that page from cars.com into his webpage titled inventory. He
-
Multiple remote debugger connections from JDev
Hello, I'm running JDev Studio Edition Version 11.1.2.3.0 I need to debug an application running on a 2 node WLS Cluster. I have the two servers running in debug mode listening on different hosts/ports. In JDev I click the debug button twice and open