IPod displays non-animated battery

My iPod 5th generation displays a non-animated battery icon that won't go away. I've had it plugged in to my USB 2.0 port for over two hours. If I reset it, it briefly flashes a battery icon with exclamation point.
G4 Quicksilver   Mac OS X (10.4.3)   laCie external HD, Gigadesigns 1.8 accelerator, Alchemy TV card, bluetooth

Is this what is happening?
http://docs.info.apple.com/article.html?artnum=302420
Also, have you tried this?
iPod's Battery Doesn't Charge
btabz

Similar Messages

  • Video Ipod Errors - Exclamation/Non-animated Battery Icon Loop

    i have a problem with my video ipod and have followed every single suggestion and tutorial on the apple web site.....
    when i reset, it gives the sad ipod face with exclamation point and the message:
    "www.apple.com/support/ipod" and lights up...
    then turns light off and goes to battery message without any animaton... then just about every 2 minutes or so it goes back to the exclamation point and the message:
    "www.apple.com/support/ipod" and lights up...
    and repeats..
    been charging for hours...
    can't get it into disk mode either...
    computer doesn't recognize...

    Mine is doing a similar item but it will work but just gets a battery logo with a yield and a sign like this inside the yeild I cannot get it to sync. I don't think it is the hard drive it appears to be more software related then hardware related anyone have any solutions.

  • My iPod displays black & white battery charge icon and sad iPod face. help!

    I plugged my iPod into an older iMac; it froze and had to be restarted.
    I restarted it and started listening on shuffle.
    It would skip through all of my songs without me pressing any buttons.
    I restarted again and it worked fine.
    I came home and plugged it into my 10.3.9 iMac and the tracks started skiping and barely playing on iTunes.
    I tried to eject it, but it wouldn't...so I unplugged it.
    I then restarted it, but after the silver-on-black iMac icon came up, the sad iPod face showed.
    So I pluged it back into the computer. It spontaniously restarted when I tried all of the steps of restarting and reinstalling.
    Then it just displays a black& white old battery charge icon with a thunder bolt that flickers on the screen now and then.
    And continues to restart itself with first the apple icon turning into the sad ipod face and then into the battery charge icon.
    I really do not want to restore my iPod. I am hoping to keep my files but at this point, my future is bleak.
    This happened last night. They said it might just be my battery so I kept it plugged in for about 10 hours. Nothing.
    What can I do?
    Please, please help.

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/ipod/download/
    http://www.apple.com/itunes/download/
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

  • Ipod displaying Very low Battery. But no charge

    well my ipod today died on me, due to running out of battery. I went home and tried to charge it, however the ipod would only display the apple logo, and would not charge. When i tried to restart it it would just say
    "Please Wait. Very Low Battery"
    Ipod 5G   Windows XP  

    Have you had a chance to look at this troubleshooting page? It may be of some help: iPod's battery doesn't charge

  • Ipod displaying a monochrome non-animated version of the battery icon...

    I think my ipod's battery is depleted and when i connect it to the USB port in my computer, it shows a monochrome non-animated version of the battery icon...the troubleshooter says that the ipod will turn on in abt 30 minutes...however i have waited for abt 3 hours and still the battery icon is there...and also after sumtime the apple logo appears on the screen for and then the ipod switches off...the logo appears for abt 5 times before displayin the monochrome non-animated version of the battery icon again...and it keeps repeating and the ipod wont turn on...can any 1 pls help?

    I encountered this problem several times, too. The b/w logo appears because the battery is deeply discharged. In my cause, it is replaced by the normal screen after some minutes (after the battery was charged a bit).
    Did you connect your iPod to "high-powered" USB?

  • My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

    Hello Friends,
    I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
    1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
    2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
    (I'm using windows 7)
    Friends, Please help me with the above problems. It will be a great help.
    Thank You.
    R.SAMALA

    Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • Used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter

    used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter.
    Can anyone help ?
    please?

    WHow long have you left it to charge?  Have you tried resetting it after a short period of time to see if that can help jumpstart the charging process? To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Ipod displays a battery with an exclamation mark on it

    my ipod displays a battery with an exclamation mark on it and then turns off.any ideas as to how to fix it?

    Try resetting the iPod whilst connected to the charger. Hold down the menu/select buttons until you see the logo. Also have a look here.
    iPod battery won't charge.

  • Screen displays triangle ! In middle and picture of iPod next to it battery was low

    My iPod displays a tri angle with a ! In the middle and a picture of an iPod  underneath it said www.apple.com/support/ipod

    If you are seeing a Sad Face iPod you'll want to try to restore the iPod in iTunes. If you can't do that the iPod needs to be repaired.
    The Sad Face iPod usually indicates that there has been hardware failure with the iPod.

  • My brand-new iPod touch (5th Gen) battery takes a very long time to fully charge, even while not in use. Why is this and what should I do?

    Just recently bought a brand-new iPod touch, 5th generation. To be exact, got it two days ago, this past Saturday, on 12/13/2014. Initially, when I first turned it on, it had a fully charge and I didn't need to charge it. I also didn't see anything in the very small and limited start-up guide you receive with it to charge it for a certain amount of time before use, or to use it until the battery dies, then charge all the way, like a lot of electronic devices have you do when you first purchase them.
    So I was assuming I didn't need to do anything like that. First question, should I have charged it for a period of time before use? Should I have used it until the battery died, then plugged it in and charged it fully before use? Or is none of this necessary initially and iPod batteries are good to go from the start?
    Please excuse me if this is an obvious question, as this is my first ever iPod. Anyways,like I said, nothing in the "instructions" said anything about that, so I didn't do it, I just used it until it got below 20% battery left, then I plugged it in.
    Now for the battery itself, it takes literally a day or so to fully charge, even while not in use. Even if I use it for a while, turn off the iPod to make sure it shuts off all background data and apps, and then plug it in to charge, it still charges extremely slowly. I've never seen a device take this long to charge. As for the battery life itself, I'd say at full charge it lasts about 4-5 hrs, maybe 6, and then I have to charge it again. Meanwhile it takes around 24 hours, without me using it, to fully charge. If I use it while its charging, the battery decreases faster than it charges, and eventually I'll get the typical "20% battery remaining" message pop up.
    I know it is charging, as the lightning symbol is next to the battery symbol. Specifically, right now, I plugged it in about 1 hr 30 minutes ago, and it has barely gone up. Also, whenever I press the home button to check the battery, I can see it jump down from about 50% to somewhere around 25%-30%. What is that about?
    This is really frustrating, and I'm seriously contemplating either taking it back and trying my luck with a different iPod, or just taking it back and getting my money back. Any help and clarification on this matter would be greatly appreciated, and I'll answer any questions I can to shed more light on this.

    It will take longer to charge the 5G's battery than either the 3G or 4G's battery.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source like a computer's USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Help... Ipod display a sad Ipod icon..

    Help me. My Ipod display a sad Ipod icon whenever I turn it on. I have already try the method here (Active Disk mode) but I can´t activate it. Don´t know what to do. I´ve bring it to an Ipod store, but they also don´t know what to do. How can I send it back to warranty? I´m in Germany.

    See these troubleshooting articles.
    Sad iPod icon.
    What does this picture on my iPod mean?
    PC doesn't recognize the iPod is connected.
    Make sure you are attempting the disk mode entry correctly.
    Putting iPod into disk mode.
    This icon is usually indicative of a hard drive problem, and if none of the above help, it will need service.
    You can arrange online service here.
    Service request.

  • Why does my iphone 4s not display the correct battery percentage? it can get really annoying if it turns off unexpectedly and after that another problem occurs with the phone turning off and on repeadtly

    My iphone 4s recently started shutting off and on unexpectedly when updating a whole load of snapchat story's on my feed. However i also have a problem with the battery percentage, i've tried everything with it experimenting all most everything. i even changed my battery twice and i still don't know what to do
    someone please help me

    Hi 3Kadzo,
    Welcome to the Apple Support Communities!
    I understand you are having some concerns about the battery usage and percentage displayed on your iPhone 4s. I would suggest the troubleshooting steps in the following article to help isolate and resolve these issues.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    I hope this helps,   
    -Joe

  • I have 3 airport express units, an Ipod and a PC.  I used the PC to set up an airTunes and the AirUtility can see all three of the airexpresses.  The Ipod displays all of the airexpresses and I can pick any one to stream music to. PC won't - any ideas?

    I have 3 airport express units, an Ipod and a Windows 7 PC.  I used the PC to set up an iTunes/airTunes and the AirUtility can see all three of the expresses.  The Ipod displays all of the expresses and I can pick any one to stream music to. The PC won't - any ideas? AirUtility tells me the 7.5.2 version of the firmware is the latest for the expresses and ITunes is also reporting that there are no upgrades available.  I get an error code -15000 when I try to connect from the PC to one of the expresses.

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

  • Ipod touch non si accende,lo schermo si illumina di bianco ma non succede nulla

    ipod touch non si accende, si illumina di luce biancastra ma non va avanti;ho già fatto gli aggiornamenti e provato il ripristino totale

    Google translate
    ipod touch will not turn on, lights up in white light but does not go forward, I've done the updates and tried the master reset
    iPod touch, already 'made ​​updates
    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod tuch non si accende

    ipod tuch non si accende e non viene riconosciuto in itunes

    Google translate
    ipod touch will not turn on, lights up in white light but does not go forward, I've done the updates and tried the master reset
    iPod touch, already 'made ​​updates
    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • New error with upgrade jboss/tomcat: "Connection handle has been closed and is unusable"

    Hi, This error suddenly appeared when we upgraded from jboss3/tomcat5.0 to jboss4.2/tomcat5.5. here's the usecase: 1) User clicks on report link 2) Crystal reports web componnent displays screen to fill in report parameters. 3) user enters parameters

  • Migrating Essbase cube across versions via file system

    A large BSO cube has been taking much longer to complete a 'calc all' in Essbase 11.1.2.2 than on Essbase 9.3.1 despite all Essbase.cfg, app and db settings being same (https://forums.oracle.com/thread/2599658). As a last resort, I've tried the follo

  • Using HTML, what happens to form variables on submit?

    If I create a simple AIR app that  has two files, lets say index.html and next.html, how would I pass form  variables from one page to the next since there is no server side  scripting? Can  it be done via javascript somehow, by maybe saving the vari

  • What happened to being able to shuffle a playlist?

    I seem to have lost the ability to shuffle songs when I updated my iPad recently.  What happened?

  • Deleate the  quries in bex

    Hi,     If i want to deleate the quries in bex how can deleate . If this quriey is assigned to any role how can i see , If this quriey is assigned to no of roles can i deleate all the roles or can deleate quriy only enough. Any one can help me. Thank