IPod Nano doing weird things

Ok, so I've got a 2Gb iPod nano, but almost everytime I try to recharge it I have to reset/restore it because it gives the folder_exclamationpoint error. When this happens I can't get it to work other then restoring it to the factory settings.
This is really annoying and I hope someone here knows how to fix this. Any help would be appreciated.

From what you have described here, it sounds like you need a new battery. Apple offers a battery replacement service, along with many third-party iPod repair companies out there.
Unfortunately, it seems that the 5th gen. iPod batteries wear out relatively fast.

Similar Messages

  • My new iPod nano does not get the battery life that is advertised

    Help me my iPod nano does not get the battery life that is advertised

    Which battery life are you referring to? Apple's website states the iPod Nano 6th Gen will get "up to 24 hours of music playback when fully charged". There are going to be a lot of things that can change that. Are you using the stopwatch or the count down timer a lot? Are you using the FM radio a lot? Any accessories that you are using with the iPod? These will all have an effect on your battery life.

  • My new ipod nano does not sync the ipod name cannot be synced the required disk cannot be found

    my new ipod nano does not sync the ipod name cannot be synced the required disk cannot be found

    Wow .... so you are syncing via WiFi when you sync .... would that be correct?
    I would still quit iTunes and then restart and see what happens. The iPad and iTunes must be playing some weird games.
    If you do sync via WiFi (I do), I think you are better off closing iTunes when you are done - unless of course you are using iTunes for Home Sharing or something like that. My experience is that if you leave iTunes running, the iPad and iTunes just start sending weird signals back and forth.
    Since I started Wifi syncing, I have seen messages in iTunes that made absolutely no sense at all. Anyway, that's my take on it. If you do not WiFi sync, then I have no clue why you are getting these messages.

  • MY new Ipod Nano does not hold a charge.  I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time.  I drains to the red line in less than 2 days.  My husband's nano will last a week this way.

    MY new Ipod Nano does not hold a charge.  I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time.  I drains to the red line in less than 2 days.  My husband's nano will last a week this way.  I thought it drained because of looking at photos, so I quit looking at them and it made no difference.  Am I doing something incorrectly to cause this short battery life?

    You are still under warranty if your iPod is "new."  Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP.  Whichever is more convenient for you.

  • Ipod nano does not synch all contacts

    ipod nano does not synch all contacts.  When it synchs, it only transfers 7 of 2000+ contacts

    My point in the original posting that this is a bug seems to have been answered affirmatively by the notations of the quirkiness of the action. The argument that it must not be a bug because it would have been solved by now is totally disingenuous. Apparently Apple programmers (or their management) are not any superior to Microsoft programmers in that they focus on adding new bells and whistles while allowing longstanding problems in the core code to continue to fester.

  • Windows 8 - SC6 started doing weird things, not working correctly

    Windows 8 and CS6 - Liquifying tool not working and and actions not working correctly, back ground screen flickers and changes color and does weird things. I have done a complete D&R and it does the same thing. Someone with the same problem suggested a D&R and deactivate, then reinstall and reactivate, could this possibly work? if so, how would you do that? Thanks

    Yes, one I can think of. Get the make and model of your video card and head over to the card manufacturer's website.
    Check for and install the latest drivers for your card.
    Also see if changing the settings of your GPU helps. Uncheck everything (OpenCL Anti-alias 30 bit displays) and start at Basic. then work your way up to Normal and Advanced.

  • My daughters ipod nano does not show up in her itunes

    My daughters ipod nano does not show up in her itunes on her computer. It has error message ipod has been detected but could not be identified properly. we have uninstalled itunes and reinstalled with the same error message. Her itunes is 10.2 .1.1 version.  If you plug her ipod into my computer/itunes it works just fine. I am also using version 10.2.1.1 
    We have tried updating to 10.5.2 itunes but it runs for ever and then says it can't update.
    help please?

    iPod appears in Windows but not in iTunes

  • Ipod nano does not appear in itunes

    My 7th generation iPod nano does not appear in iTunes on a Windows 8 PC since installing the 11.1.4.62 update.  I have now tried every step from the recommended KB:  http://support.apple.com/kb/TS1363 with no relief.  Windows sees the iPod just fine...

    Same problem. Also Windows 8... There is no problem at all with a Windows 7 computer.

  • Voice over in ipod nano does not recognize different languages

    hey, apple support? would you be so kind as to answer this question?
    This is really a problem! Voice over in ipod nano does not recognize different languages and speaks only one language!! even though the song tags are in russian spanish japanese etc
    When you plan to fix it??????

    Hey ecmda,
    Thanks for using Apple Support Communities.
    If it is playing one song over and over it may be on repeat.
    iPod nano
    User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1624/en_US/ipod_nano_user_guide.pdf
    Repeat songs
    Tap the Now Playing screen, then tap . Tap again for more options:
    = Repeat all songs in the current album or list.
    = Repeat only the current song over and over.
    Have a nice day,
    Mario

  • My iPod nano  does not appear in iTunes,

    My iPod nano does not appear in iTunes.  I have installed the updated version of itunes but nano was not connected.  Do I need to connect while updated?

    Hi pbirdy,
    Thanks for using Apple Support Communities.
    If your iPod does not appear in iTunes when you connect it to your PC.
    For more information on this, take a look at this article:
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    Best of luck,
    Mario

  • TS3716 installed the new itunes and now my ipod nano  does not show in the device menu

    installed the new itunes and now my ipod nano  does not show in the device menu

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • My ipod does weird things

    So I have a 30g video ipod that I have had for about a year now. Lately it has been doing so really weird things. It will be fully charged but run out of battery in thirty minutes or less, and it takes it anywhere from ten to fifteen seconds atleast to do anything. Play a song, pause a song, go through menus, everything. I was wondering if anyone could give me any ideas as to what is wrong or what I can do. My last resort would be sending it to apple.

    Well, after getting NOWHERE with online help, I sent in my iPod for repair. After having it out of my possession for about 5 days Apple happily informed me that nothing is wrong.
    Yet, SOMETHING IS WRONG!!!!!!!!!
    It still doesn't "start"* my iTrip. Even though mine works fine on my wife's Nano. And even though hers doesn't work on mine. And even though it doesn't always get recognized by the computer when plugged in. And even though when it does get seen by iTunes, iTunes (about half the time) thinks it is corrupt and needs to be reformatted.
    Oh, and now it doesn't charge through the iTrip port anymore.
    But hey, nothing is wrong.
    Anyone with anything helpful?
    And before anyone suggests it again, I've restored the thing several times.
    *By start I mean that the iTrip (LCD) will turn on and begin transmitting. Most of the time I have to fiddle with turning the iPod off and on and/or resetting it to get it to finally work. That process usually takes about 15 minutes or so.

  • My ipod nano does not appear on my computer no matter what i do

    Iv tried for 6 months to get my computer to recognize my ipod nano.iv downloaded itunes 7.3, my ipod is fully charged, all my usb ports are updated and in device manager its as if nothing has been plugged in. Iv tried putting my ipod in disc mode and when i plug it into the computer it does nothing and still reads: ok to disconnect.nothing seems to work! I plug it in to my computer and nothing!!! Iv contacted apple and have even taken to ipd into the store but they were no help. my friend had experienced the same thing and said she tried for a year until one day her computer just decided to read her ipod. can somebody help me.........

    the same exact thing happens to me except that when i plug it in it tells me not to disconnect it. i had a friend who told me to leave it plugged in no matter how long it took.. i waited for 5 hours or more for my ipod to do something and i got so mad i just disconnected it.it didn't do ANYTHING AT ALL. so, if someday you find out how to make yours work.. can you tell me please? i'm desperate!
      Windows XP  

  • My ipod nano went weird?

    For the past year I've been putting music on the ipod nano with no problem. The music was fine, perfect quality.
    Yesterday I wanted to put more songs on it so I downloaded itunes and installed it.
    Dragged my songs onto the ipod and let it finish doing its thing.
    Then I went to listen to the music and it was normal, but after about an hour all my songs suddenly changed. They didn't sound like they were supposed to.
    I can't really describe it, but it just didn't sound right at all. For example it's like they got a bad singer and horrible band and forgot to make it sound better.
    I don't know what to do, I've already tried resetting it and I want to think as formatting as a last resort because I don't have half the cds the songs came from anymore...
    Please help T_T

    maryfromgenoa wrote:
    They are all in Itunes library, but it won't recognize my ipod.
    I'm not sure what that means. When you hook up your nano to the computer, does it appear in the bar along the left side? If so, select a sync method (automatic or manual) and sync the tunes you want on the nano.

  • Ipod Nano does not show up in Itunes

    Cannot transfer songs to Ipod Nano.  Under devices it does not show up in itunes.  Also I cannot back up either.  The only thing that shows up under devices
    is Sharing.  It is showing up on My computer.  How can I fix this.

    Hi there Ireneclover,
    You may find the troubleshooting steps in the article below helpful.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    -Griff W. 

Maybe you are looking for

  • Printing Report on client printer

    Hi, I am using oracle 9ids ( Oracle9i Developer Suite 9.0.2.0.1 ). I have an application which call a report from a form module. I run the application from another machine and that machine has a local printer installed on that machine. when I give de

  • Multiple Speakers Choice Not Available

    I downloaded fitmware update for airport express (apple base station 6.2) Now I can only connect to one set of speakers at a time. I used to be able to check mark a box "multiple speakers" and play music in different rooms. Now I can only choose one

  • Performance Problems with Virtualized DC (2012 R2)

    Just added a new Hyper-V 2012 R2 Server Edition box running two virtualized DCs (2012 R2).  Ever since, performance using ADUC has been lacking.  Pinging the virtual machines, the results vary between 1ms-200ms. For the past week I thought the issue

  • Is a reboot necessary after a kernel upgrade? [SOLVED/Answered =)]

    Hey folks, longtime arch user (since ~2006), first time registration/post. Just a dead-simple question: is it necessary for me to reboot my Arch systems after 'pacman -Syu' kernel upgrades? I've always done it out of sheer habit coming from a WIndows

  • Questions to a moderator: How to enable true Dolby Digital So

    Hallo,I wish to ask you directly, because I find no answers in all forums. That?s clear how to enable CMMS, but is it necessary to activate CMMS for using Dolby Digital Sound with 5. speakers? Because my Soundblaster Audigy 2 ZS has no Dolby Digital