Ipod touch doesn't work with latest itunes install

Ok, I've been around the block too many times. Somebody, pleez help! I have a 3rd generation ipod touch. Couldn't connect to itunes (previous install for our nano and classic). Uninstalled it. Downloaded fresh, latest, 64bit installation. Tons of problems with Apple Application Support. Uninstalled, reinstalled, uninstalled EVERYTHING (Quicktime, Bonjour, updater, etc.) Used Windows uninstaller and registry cleaner. Reinstalled - iTunes works. Great. Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?

Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?
In iTunes, with the Touch connected, go "Help > Run diagnostics." Uncheck "Network Connectivity tests" and "DVD/CD tests" but leave the other boxes checked. Click "next" and then "next" again. Paste the contents of your diagnostics into a reply here so we can have a look.

Similar Messages

  • Latest ipod touch doesn't sync with my itunes

    I had an ipod touch 1st gen, after updating it, it failed to sync with my itunes which was updated to the latest version at the time that is about 6 months ago (June 2010), then finally my itunes stopped working and would not open, until one of the users advised me to disable the bonjour service and that was the only way I got to open my itunes, however still could not sync it to my ipod since then.
    Recently, I bought the latest itouch Jan 2011, I thought it will fix the issue, however again it did not sync with my itunes (latest version)! I followed many advices on the discussions with regards of uninstalling and reinstalling the itunes and manually running the exe file and extracting the file then upating the ipod drive. When on my last attempt to reinstall itunes it erased more than 70% of my songs, I used to have over 5000 songs, now they are 1515 songs only!
    So I lost my songs, cannot use my new ipod touch and my old one got lost too!
    I really need serious HELP!

    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • 1st gen ipod touch will not work with new iTunes 11.help!

    1st generation Ipod Touch.  I ran an update on my ITunes on my PC, and my IPOD will no longer connect to my itunes.  Please help.  If at all possible.

    iTunes 11 works with all model iPods.
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    iOS: Device not recognized in iTunes for Windows

  • Ipod Touch 3rd Gen Wiped with Latest iTunes Update

    Hi,
    I had my ipod touch 3rd gen up to date with the latest firmware 5.x whatever it was. Then recently they released a new iTunes update which i downloaded and updated. Although doing this itunes update wiped everything off my ipod. I manually manage my music and this is very annoying to have to reselect all the songs i like and to put it back in. What could be the reason for this ? and what could i do to make sure this doesnt happen again!
    I had already just recently manually added all songs again when OS5 had just released and having to do it now for the 2nd time after that just seems annoying.
    Please Help
    Thanks!

    I would just go to the Apple Store and search for headphone with mic under iPod accessories.

  • My ipod touch isn't working with my itunes.

    It won't put my music onto my ipod, but it's on my itunes. It just tells me to restore to factory settings but that doesn't work. What can i do?

    See my response to your other post. Posting again only hinders, it does not help.

  • IPod Touch Doesn't Work with 64 Bit Windows Vista Ultimate?

    So i blew out 500$ for something that will not work on my OS?
    ....How can i get it to work?

    As stated in the System Requirements (link) 64bit versions of Vista are not supported. 
    Personally I don't think this is clearly enough stated on the sales pages so you should have a good basis for getting a refund.
    mrtotes

  • New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

    New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

    No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
    A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
    You can get 10.6.8 here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Will ipod touch 4 gen work with windows vista service pack 1?

    Will ipod touch 4 gen work with vista service pack 1?

    All Apple says is:
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    Does it work/sync with SP1?
    Why not update to latest Vista?

  • My iPod Touch is not working with Bose SoundDock.  How can I fix it?

    My iPod Touch is not working with Bose DoundDock Series II.  Can anyone suggest how I can get these 2 to work together?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
    iPod Touch Repair – iFixit                  

  • My new ipod touch doesn't appear neither in Itunes nor in browser

    my new ipod touch doesn't appear neither in Itunes nor in browser
    I have done everything explained on ipod website in vain...
    Could you please help me ?

    Here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • The home button on my 4th gen iPod touch doesn't work. If i'm luck and i'm pressing hard enough it goes to the home screen.  Any suggestions?

    The home button on my 4th gen iPod touch doesn't work. If i'm luck and i'm pressing hard enough it goes to the home screen.  Any suggestions?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ

  • Does ipod touch 4th generation work with Altec Lansing Octiv Mini Executive Edition?

    i want to buy a speaker and i wonder if my ipod touch 4th generation work with Altec Lansing Octiv Mini Executive Edition
    plz answer

    If anyone is interested I managed to solve this problem by reformatting the ipod as a mac ipod, with the help of friends system. This does get rid of the music but as I had it backed up wasn't a problem. I then plugged the mac Ipod back into a windows pc and reformatted it as a windows ipod which updated the firmware correctly and have'nt had a problem since.

  • My pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same

    my pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same plz help

    Hello again Graham,sorry I spelt your name wrong on my last post ... Ok I went to the device manager and found a yellow mark. I went to it and selected re install driver. I then re booted my pc. I now have no yellow marks in the list but my pc still wont recognise my iphone.
    Could I try anything else ?
    Cheers Chris

  • Why is my ipod touch 5 not working with itunes? It says it needs to update to itunes 10.7 or later.

    My new ipod touch 5 is working perfectly, almost. When I plugged it in to my laptop for Itunes, the laptop said the ipod needs to update to itunes 10.7 or later. The problem is it won't let me update it. Can somebody help me?

    You need to be running Mac OS X 10.6.8 or newer to sync it. If you're using Mac OS X 10.6 through 10.6.7, run Software Update twice. If you're running Mac OS X 10.5.8 or earlier and have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
    If you're using Windows, what happens when you try to update it?
    (77078)

  • Ipod touch no longer working with isimple device?

    I have a 4th gen Ipod touch that was working just fine with my isimple device in my vehicle until I believe I updated the ipod to the latest firmware. I now recieve a message saying device is not compatible with Ipod, Is there anyway I can rollback to the previous version which I believe was 6.1.2? Thanks!!

    Downgrading the iOS is not supported by Apple.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    Go to the devices support site and see if they have anything. Maybe a firmware update is available. Otherwise you will have to wait for a firmware or iOS update.

Maybe you are looking for

  • Custom reports needed in excel format..12.0.6

    Hi we are on 12.0.6 All of our custom reports are defined with output format of pdf at the time of defining executable and program from sysadmin Now there is a need by our costing department that they need all the finanical related reports in excel f

  • Good 17-19" color monitor for under $200?

    I'm looking for a decent color monitor -- in terms of color fidelity and contrast ratio -- for under $200, preferably $150 or less.  Is that possible?  My current monitor makes pictures appear too dark when editing, even with the brightness turned al

  • Problem : Idoc to File Senario,overriding the segments in Idoc,on condition

    Hello People, Idoc to file senario. There are fields in the Idoc which i want to populate, if that particular Idoc is going to XI. Can u tell me how can i check this condition .. ???

  • Values for various work order status

    Hi Guys, In AUFK table(which is the order master data table), there is a field ASTNR, which indicates the order status. But I couldn't get any values for each status of the orders. If anyone knows the status and the value for the corresponding status

  • I want to see the previous month workload statistics for my system.

    Hello, I want to see the previous month workload statistics for my system. When I go to st03n ->expert mode, go to month view and when I click on previous month workload analysis I see data for 12 days only. However, the data is available in weekly v