Values for various work order status

Hi Guys,
In AUFK table(which is the order master data table), there is a field ASTNR, which indicates the order status.
But I couldn't get any values for each status of the orders.
If anyone knows the status and the value for the corresponding status of the order, please let me know.
</b> I specifically want the value of ASTNR, for which the status is Closed </b>.
Points will be awarded for helpful answers...
Thanks and regards,
SP.

Hey,
ASTNR is not the field you should be evaluating for your requirement. You should look into the system/user status tables of the work order.
The system status master table is TJ02T and the user status master table is TJ30T. To derive the user statuses assigned to work order you need to know the status profile assigned to the work order type.
The various statuses assigned to a work order in its entire life cycle can be found in the table JEST.
In your case first get the user status code from the TJ30T table and then get all records from JEST for the derived user status code. JEST-OBJNR contains the work order number.
~Kiran

Similar Messages

API for Work Order status from Released to Unreleased or any user defined s

Dear All
Is there any API for to change work order status from Released to Unreleased or any user defined status.
Take care
Aamir

Hi Ben,
As query is resolved, you should close the Thread after rewarding to the Concerned
Thanks,
Manish

BADI for Updating work order component data

Hi,
I need to update the field special stock indicator for the work order component data when it is saved. I am using the BADI WORKORDER_UPDATE for the same, but when I implemented the ZWORKORDER_UPDATE_IM using the standard defenition WORKORDER_UPDATE , the code does not allow me to change the it_component internal table belonging to the BEFORE_UPDATE method. Could you please help me in this.
Basically if we are implementing a standard defenition how to change the parameters of the methods in it.
Regards,
Prabaharan.G

Hi ,
It is giving the below dump. The parameter is importing parameter and it does not allow to change even using field symbol. Is there any other way. Is there an user exit which will be called when pressing enter button in component screen. The exit EXIT_SAPLCOBT_001 did not work for this.
Error analysis
    The program tried to assign a new value to the field "<F_FS1>" even though
    it is protected against changes.
The following objects are protected:
    - Character or numeric literals
    - Constants (CONSTANTS)
    - Parameters of the category IMPORTING REFERENCE for functions
      and methods
    - Untyped field symbols to which a field has not yet been assigned
      using ASSIGN
    - TABLES parameters if the corresponding actual parameter is protected
      against changes
    - USING reference parameters and CHANGING parameters for FORMs if
      the actual parameter for this is protected against changes
Regards,
Prabaharan.G

Purchase and release order not allowed for TECO work orders

Hi
We are typically setting maintenance work orders to TECO once the physical work as been performed as that sets the reference date for showing the history of when the maintenance was performed, and when the maintenance call was completed. However, we have invoices that may come in significantly later than when the physical work was performed.
Once the order is in TECO a purchase or release order (for services against a contract) cannot be created for the work order. Additionally it appears that even if we have a release order,or purchase order, if it is not for the exact amount of the invoice the release or purchase order cannot be ammended - we get the sameerror mssage (BS007) as when creating a new purchase order for the TECO order.
I had wondered about using BS22 to change TECO to continue to allow purchase and release orders when the order is in TECO status.
Any input on pros/cons or other approachs appreciated.
Philip

Thanks
That was what I initially thought. However I was informed that if the invoice is not for the originally determined amount that to post the invoice means having to change the PO, and changing the PO appears to hit the same business transaction as creating a PO, and so we get the error mssage.
The issue is that we may know we need to have services estimated at, say, $5.000. But we do not know what the actual final invoice will be. So the actual amount may end up being $4,500 or $5,500 as an example, and it may come ni late from the vendor. The Purchse Order side is not my expertize, but I am being informed that the invoice must match the PO amount, otherwise the PO must be ammended to match. As the order is in TECO, the user cannot amend the PO.
I would be happy to know of other options, or at least good questions to ask. I want the end user to be able to post the invoice against the PO, after the order is in TECO, even it the invoice amount is not exactly the same as what was originally anticipated.
regards
Philip

Internal Order report for PM work order

Hi There Experts,
              My question is related to Plant Maintainance (PM) & Internal orders. Is there any standard report in SAP controlling or anywhere else which provides for each Internal Order number the list of Work Orders which have been charged to the Internal order and also if the Work Orders have PO's then a list of POs for each Work order.
A rough picture of the report is as below:
Internal Order                  Work Order/s              PO's
11112222                             5673910                     4567890
                                           6789155                     1122445
22555111                            77889933
If anybody could answer this it would really really help me.
Thanks in Advance
John

Hi,
Thanks for your quick replies.
Can we get the report as follows.
1. Total Po's value for the internal Order (through Table EKKN)                                                      xxx
Less: Value already posted to Internal order after creation of cost elements (S_alr_87013019) xxx
Less: Total Value to be invoiced (Tcode -ME2N)                                                                             xxx
Net amount to be posted to Internal Order manually                                                                        xxx
Is it correct?
Regards
Madhusekhar Gupta G
Edited by: gms gupta on Feb 20, 2012 4:33 PM

FM for Uploading Delivery address for Components for PM Work Order (IW31)

Can any one please help me out in finding any Function module or any other method for uploading the Delivery address for Components to SAP system in transaction IW31 for PM Work Order.

Hi
I am using text items (T Text item).Therefore, there will be no checking for those items form a MM prespective.
There is no error appear. The only thing is that i have status MANC (Mat.availability not checked) on my WO
I'm just trying to figure out if status should be removed some how, or if this is the normal behaviour.
Many thanks
Joana

Generating deltas records after a work order status change

Hi
We are currently reporting on Work Order status changes in BW. However, the process team has written an ABAP program that allows users to change a Work Order status or an Opeartion status. Any changes using this method do not trigger a delta record to be written to the Outbound Queue MCEX17 and subsequently we do not pick them up in BW without having to to a re-initialise.
Could anyone tell me how we could trigger a delta to be written to the Outbound Queue in the same manner as the standard Work Order change transaction IW32.
Cheers, Mark

Hi
I m not sure about functionality though but you can create delta by using FM...
Search SDN and you will get doc for that..
Regards
Guarav
Assign points if it helps

Purchase Info Record for Frame work Order

Hi Friends,
Do we have Purchase info record for Frame work Order(FO) ?. If yes, Please tell me which info category should i need to select to create a Purchase Info Record.
Thanks

Hi
Is that means, Framework PO will also use the same standard Purchase info record ?
Thanks

Automating the services for object for a work order

Hi All,
Can anyone post an ABAP code using which we can automate the process of creating a note for a Work order at the time of saving the work order. I need to create a note with the work order at the time of saving it. This note needs to be attached automatically. Can anyone help me with the code to do this?

Uhm... If you want us to do your job, how much are you willing to pay?
How is the note "attached"? If it's an attachment using GOS then the code has already been posted on SDN - look it up. You'll need to add it to the work order creation (I'm guessing there should be some kind of BAPI or FM).

Intercompny billing for maintenance work orders

All,
I have two scenarios dealing with intercompany activities for maintenance work orders. The first scenario involves a maintenance work order in Company B doing work on equipment also in Company B. The work order requires labor services and material from Company A. What is the most efficient way to consume the labor and material into the Company B work order? My client requires intercompany billing anytime labor services and/or material crosses into another company. So for this scenario, should I execute a cross-company labor confirmation and material consumption and then, create intercompany invoicing from this activity? Or, should Company B provide a purchase order to Company A for the labor and material and then, Company A executes intercompany billing to facilitate the correct intercompany financial postings?
The second scenario requires a maintenance work order settlement from Company A to Company B. How should the intercompany billing be done for this? Should I settle to the cost object in company B and then do the intercompany billing? Or, should I settle to a sales document (i.e., debit memo) and then execute the intercompany billing?
Pleases advise.
Thanks!

Alex,
You should be able to use the List edit transaction iw38 to select and print Multiple Orders simultaneosuly. Once you have selected the orders in the Output screen, use the menu path ORDER > PRINT ORDER.
Regards
Narasimhan

Settlemnt Required For Bulk Work Orders

Hi All,
How to create settlement rule for Bulk Work Orders?
Is there Any T-code is there
or using Lsmw

Settlement rule can be created during Order release or TECO. By defining Settlement Profile, Allocation Structure with Default Object, appropriate details in Equipment / Functional Location Master data, will do the trick.
Order release or TECO can be done in mass in IW38.
If you have any other settlement rule different than these settings, then you should use LSMW.

Max.value for a sales order

Hi Gurus,
A min.order value can be maintained in Sales order by the condition type AMIW but can any one tell how to maintain max.value for a sales order???
Awaiting your early answers..........
Sunanda.P

hi
in OVA8, there maintain the maximum document value as required.
If not then you need to take help of ABAPer
With the help of ABAper you need to prepare a logic for this maximum order value.
Then Go to sales order user exit userexit_save_document_prepare there u insert logic with the help of abaper.
Based on logic created by ABAPer, while saving the sales order it will check this logic and throw out the error if it exceeds max value
Regards
Edited by: WISH on Aug 4, 2008 6:19 AM

How to refer the work order status value from a different transaction in the step handler?

Hi All,
I have a requirement to check the status of the work order from a different transaction before doing some logic in the current transaction. The following transactions are done to replicate the issue
1)changing the status to ONSITE to edit the work order (transaction 1)
2)Adding some information which will do some logic (transaction 2)
3)Completing the work order (transaction 3)
The transaction 2 will have some logic and will be executed only if the status is COMP but even though the status is COMP now (transaction 3) my condition check in the logic is showing as ONSITE status(transaction.status=ONSITE) and it fails. How can i get the latest status of the work order in the device? Please advice

Hi Jason,
The CompleteWorkOrderFinish sub action does have Apply action (screenshot 1) and the transaction definition (screenshot 2)of CompleteWorkOrderFix transaction with the only property Status which has the following settings (screenshot 3)
Also I am trying to add a status property in EditMeterFitDetaisl transaction and update this value with the current status of the work order using object collections filtering with key value. Please let me know if that approach can be followed. Thanks

Status QM* for a work order from FM: STATUS_READ_MULTI.

Hi All
We are calling the function module
CALL FUNCTION 'STATUS_READ_MULTI'
     EXPORTING
       client                     = sy-mandt
       only_active                = 'X'
       all_in_buffer              = 'X'
*     GET_CHANGE_DOCUMENTS       = ' '
*     NO_BUFFER_FILL             = ' '
      TABLES
        objnr_tab                  = gt_objnr
        status                     = gt_status
gt_objnr contains two entries:
OV*1
OV*4. These are operation statuses.
In the gt_status, we are getting a range of values:
1) OR*.I believe these are order status.
2) OV*. This should be operation status.
3) QM*. NOT SURE WHAT ARE THESE STATUSES FOR???
Can anyone please tell me what does QM* statuses stand for.
Thanks in advance.
Harsh
PS: '*' indicates a range of characters.

These statuses stand for the quality notifications which you can check in QM03 tcode.
Nabheet

Report of List of all status changes for various production orders at a tim

Hi,
Can I have a standard report which shows the dates of each and every status (user & system) of a production order.
I need to have a report for a list of productio orders at a time.
If we go to CO03, header menu, status changes option is there, but it only caters for single production order.
Table JCDS is available to know the dates but I need a standard one rather than a Z development.
Or you can guide me any function module.
Thanks,
Kumar

Hello,
You will get the details of status in following table.
JEST - for object status
JSTO - Status Profile
TJ02T - to Decode the status Number
as the status data you will get from JEST is in very typical form you have to use TJ02T to find the exact status
AM

Values for various work order status

Similar Messages

Maybe you are looking for