IR change filter and group dyamically

Hi there,
I have an interactive report, and I want to use different filters and groups based on the user that is logged on, anybody know how I can do this, i.e. set the filters and groups dynamically, thanks... Anil

Hi,
maybe this post will help you developing a solution: http://apex-at-work.blogspot.com/2010/03/building-ir-filters-with-ajax-not.html
You can set at least filters dynamically with AJAX-APEX processes.
Best regards,
Tobias

Similar Messages

Changing users and groups settings without unlocking

I recently upgraded to Mountain Lion and have noticed that I can change the settings in preferences for Users and Groups without unlocking.
Should this be the case?

I tried what you suggested but there is no change.
Many Thanks

Change User and Group to Nobody

If I were to change the User and Group (in httpd.conf) to Nobody, what should I do? Is there any other setting that I need to change?

I'm on AIX5.2. Both user and group nobody are exist.
There is a note in the httpd.conf file on the user/group setting as below. What does it mean? Thanks.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!

Change uid and group administrator

hi, i want to change server uid and gid, �how i can do this?
(i have an user, and i want to change to root user)
thanks

chown -R might break things! Watch out for symlinks to thigs that user don't own!!!
This is the safer way (and works on paths with spaces):
oldid=100
newid=123
gfind /path[s] -user $oldid -print0 | gxargs -0r chown -h $newid
oldgid=100
newgid=123
gfind /path[s] -group $oldgid -print0 | gxargs -0r chgrp -h $newgid
The -h to ch.. is important to change the owner of symlinks and not what it points to as that may have a different owner (like root).
gfind and gxargs are the Gnu find and xargs found in /opt/sfw/bin
P�l

Calendar View: Unable filter Recurring Event by Start/End Time and Group by Recurring Event View

Hi All,
I have just found several issues with Calendar View from WSS 3.0:
Unable to filter by [Start Time] and [End Time]
I am not sure why these 2 columns doesn't appear in the Filtering column in the View Settings. The workaround found in the internet is to create calculated column for Start Time and and End Time. However, it doesn't work for Recurring Event, the calculated column will show only first recurring event Start Time.
Unable to use "Group By"
When I create new view in Calendar using format: "Standard View, with Expanding Recurring Events", there is no option to specify "Group By". Anyone knows how to show all recurring event in List view and grouped by Start Time (or any other column).
Thank you and apprecate for any idea.

Hello,
I got this from a colleague of mine so I can't take credit for it but here might be a possible workaround:
1. Create two new Columns called Start Filter and End Filter. Make these columns Calculated Columns with formulas of [Start Time] and [End Time] respectively. The columns should be of the Date and Time\Date and Time type and should not be displayed on the Default View.
2. Click Advanced Settings and choose Yes to the question "Allow management of Content Types" in the Content Types section. Click OK.
3. Click on the Event Content Type. Open the two columns created in step 1 and select "hidden" for both of them. Click OK.
4. Back at the list settings create a new view or edit an existing view. When you get to the filter section choose "Show items only when the following is true" and select the following:
Start Filter
is less than or equal to
[Today]
And
End Filter
is greater than or equal to
[Today]
5. Click OK to save the view.
6. Open the List view web part that is displaying the recently changed calendar and change the view to the newly created or newly edited view. Click Apply, OK.
-Aseem Nayar
This posting is provided "AS IS" with no warranties, and confers no rights

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

I changed my wheel group properties to no access at top disk level. I messed up, how can I change back in single user mode "command s" as I am now in Thailand and not able to access startup disks?

I messed up, I changed my "Wheel group" properties to No Access ( or something other than the default) at the top level of my startup disk "Macintosh HD".   Now my computer won't start up, I just get the spinning wheel of death.    I also am in Thailand right now, so I cannot go to a Genius at an apple store, nor do I have startup disks available.
So I was hoping there was a way to change back the properties of my disk (Volume) in single user mode (via Command +s) during startup, i.e. can I do a chmod command on the Macintosh HD listing under the Volume Directory.    Or where do i fix this?   Is it fixable without startup disks, etc...
THANKS FOR ANY HELP!!!!
If you could also please let me know you have an answer, I WOULD REALLY APPRECIATE IT!!!
thanks so much
mark
<Edited by Host>

Thomas,
Thanks for the info on command-R, didn't know about that!!!
Yes I changed the sharing "Wheel Group" permissions on my hard drive via Get Info.    But that's all I did.    And then most of the apps wouldn't respond with anything.    So not knowing I did something stupid, I decided to re-boot, and then nothing but the Wheel of Death at startup.
I was trying to limit access to my computer on this network, changed my public folder settings, and then I thought why not the whole hard drive, but at that time I had no idea what the "Wheel Group" was... so I shouldn't have touched it, BUT IT DID ...... argggggg....
I managed to go to an internet cafe & research the problem yesterday.    I used the command +s single mode to get in, and then did the necessary steps to mount the drive so I could make changes.   I basically did this:
Boot into single-user mode (boot while holding down CMD-S)
Follow the on-screen instructions to mount the file system as read-write (a fsck command followed by a mount command)
Type the following: "chmod o+r /" followed by "chmod o+x /"
Type "exit" to leave single user mode and complete the boot sequence.
I found it at this link http://forums.macrumors.com/showthread.php?t=416180
It worked... thank God!!!   Well so far so good.
I was going to try my own fix by chmod on the Hard drive listed under Volumes directory, but that doesn't seem to match the info under Get Info Window.    So I just used the fix above.    I probably should now go and do "Disk Utility - repair permissions", however I am a little gun shy right now, so I will probably wait until I am back in the States so I can go to an Apple store if it messes up.   Right now I'm following the "if it ain't broke, don't fix it" MOTTO...
So Thomas I just wanted to say THANKS for replying so quickly, and I really appreciate your help!!!
(yes I know I shouldn't have used my email addresses, but I WAS DESPERATE, but that's still no excuse)
Hopefully maybe this thread will help someone else out in the future....
Okay, thanks again!
Mark

Employee and Group responsible being overwitten when clicking "Change".

Hi All,
I have searched the forums for a solution to a problem I have had but did not get the bottom of it.
I have done some debugging and managed to sort it and thought I'd share my findings with you.
Problem:
You are in the Web interaction centre (CRM 5.0 in my case) and you navigate to a previously saved activity.
You click the "Change" button and the Employee Responsible and the Group Responsible are changed to the ones for the currently logged on user.
You want to stop this happenning. In our case we have a call centre who amend activities and we do not want the details for employee and group changing.
Solution:
Go to SE18.
Open BADI CRM_IC_INBOX_BADI.
Go to an active implementation or create a new one.
go to method DETERMINE_GROUP_RESPONSIBLE
Add the following line of code to the method:
C_SKIP_DEFAULT_LOGIC = 'X'.
Hope this helps someone.
Many thanks
Gary Hawkins

Thank You Gary. Appreciate it.
Best Regards,
Masood Imrani S.

Propose or change automatically, Employee Group and Subgroup.

Dear all, when executing an exit Action, thru transaction PA40, what's the best way to propose by default/change automatically, the employee group/subgroup?
Example: I want to change the employee group from '1' (Active) to '2' (Inactive), but the fields are disabled for input.
Do i have to do this thru the enhancement "PBAS001", or is there any way to do this thru configuration?
Sincerely,
Hugo Ferreira

I was searching for something in SDN and got this post.
Though it's a very late reply, whatever Sreenu has told is correct.
In the table T529A, you can define the employment status wehther it has to be active, withdrawn or inactive.
This field is input disabled in the action and the values will be defaulted from the configuration.
But Changing the employee group and employee subgroup , we can't change. If that is what is required, the values might depend on the configuration.
And even through some enhancement also we can't change. because, for IT0000 no enhancement are available. Even though the fields are from IT0001, I doubt it can be changed through enhancemnet.
If you have already achieved it through enhancemnet, please let us know.
Thanks,
RSS.

AUDIT action (create, delete, privilege escalation, set and change password from users account and group) users and admins in Solaris 10

Hello.
in Solaris 10 i need auditing process create, delete, privilege escalation, set and change password and etc... from users account and group.
I set settings:
in file syslog.conf:
*.info;mail.none;cron.none;audit.notice            @IP-Remote-syslog-server-SIEM
in file   /etc/security/audit_control:
dir:/var/audit
flags:lo,ad,ex,cc,am,no,fc,fd
minfree:20
naflags:lo
plugin:name=audit_syslog.so;p_flags=lo,ad,ex,cc,am,no
in file   /etc/security/audit_user:
root:lo,ad:no
Now I see in the logs only the fact of a connection via SSH and run processes on behalf of users. Creation. delete users, change passwords for some reason do not is logged.
Many users. For each individual write permissions in the file /etc/security/audit_user not possible, it is likely to forget any new user (or there is a possibility in this file one line to describe the audits for all accounts?)
Where is the mistake?

You are most likely hitting Bug 15779000 user/role/groupadd/mod/del don't audit their use.
And the fix is only available in S11.2.
-- Renaud

What is the SYNTAX for the user and group filters??? Is the HTML Ampersand token Amper A m p semicolon required in the filter

There seems to be quite a bit of confusion over the actual syntax for the user and group filters on the Forms Based Authentication Ldap Role and membership providers.. MSFT isn't really clear and there is a universal confusion in the blogsphere.
I the filters should the prefix be the ACTUAL Ampersand or the HTML token for an AMPERSAND.. I realize the in many cases the blogger might have inadvertently specified the html token when the bare naked ampersand was intended.. The question
therefore is : can a filter be taken directly from and ADSIEdit query and used as a filter or must the filter be made HTML safe by swapping out the AMERSAND with the HTML Token for AMERSAND before putting it into the configuration
for the LDAPRole/membership provider...
All science is either physics or stamp collecting

Hi GUYO,
I am not quite sure how we implement this on sharepoint side, as I did research and sharepoint may not have this feature to do this.
most of the LDAP for sharepoint may need to follow these steps in this article:
http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
http://blogs.msdn.com/b/sridhara/archive/2010/01/07/setting-up-fba-claims-in-sharepoint-2010-with-active-directory-membership-provider.aspxhttp://blogs.msdn.com/b/kaevans/archive/2013/01/31/configuring-ldap-for-fba-in-sharepoint-2010-or-sharepoint-2013-with-powershell.aspx
here is an example :
http://blogs.msdn.com/b/sharepoint__cloud/archive/2011/12/20/achieving-fba-with-adlds-amp-sharepoint-2010.aspx
if should this questions was at the ADSIEdit part, perhaps you can help us by opening a new thread at the AD foum
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Problem using Change production and SFC step status with Simultanious group

Hello,
We just upgraded to ME 5.2 SP5 patch which was released two days back, the problem with Simultanious group is fixed and SFC gets the correct next step as per defined in the router (Previously there was bug).
But when we try to use change production and put SFC in simultanious router at some particular operation as que it is getting in que at all operations and really can be started and completed even at the last operation.
Same is the case with step status if we put it in que at some intermediate operation all operation listed above are becoming in que irrespective of the flow defined in simultanious router.
Please let me know how to handle this.
Regards,
Pushkar Patil

Hi Pushkar,
It seems to be a bug. I would suggest opening a ticket on this.
Regards,
Alex.

Type and Group color doesn't change.

I'm having a problem with Adobe Illustrator CC 17.1.0 with colors, types and groups.
If I select a text or a group and try to change its color, the Fill color stays correct a the panel, but the text or the group maintains the old color, like the screenshot below.
The only way to change color its is selecting all text characters or all group's elements.

Here they are.
Thanks for trying to help!

Change to Consolidation Group and avoid using CoI

Hello,
We would like to use the BCS functionality Change to Consolidation Group but we don't want to implement CoI Consolidation of Investment at all. All the threads I have read seem to indicate that one has to set up CoI. Please can you advise.
Thanks

Hello all,
thank you for your responses - where under Consol Grp Change do I find the setting for the the appropriation of retained earnings? I can see the one for CoI.
Also I have had a look at both the Preparation for Acquisition and Preparation for Divestiture
http://help.sap.com/saphelp_sem60ep1/helpdata/EN/0c/ab0240536fe369e10000000a155106/frameset.htm
http://help.sap.com/saphelp_sem60ep1/helpdata/EN/63/af0240536fe369e10000000a155106/frameset.htm
which give some examples of what to expect in terms of postings and reporting re posting levels. but would still appreciate more explanations of the Posting Logic when one runs the task if you know.
Thanks

Project Server 2010 - Project Permissions - Users and Groups filter is not working

Hi,
While giving permissions from project center ribbon on a project - Users and Groups filter is not working, we are not able to filter any user.
I am not sure why this error is occurring i tried giving permissions by opening the project but still the same filtering is not happening. Below is the screen shot
We have installed Service Pack 2 and June 2014 CU recently will this effect ?
Can any one throw some light on this??
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geetha,
Which IE version are you using? First I'd try to add the URL to the compatibility mode sites, then to the trusted sites (if it is not done already). Then I'd try to set the default browser as IE8 or 9 (pressing F12, developer tool).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

IR change filter and group dyamically

Similar Messages

Maybe you are looking for