IR - Connection Issue to Essbase, client timed out

Ref: essbase server problem
Ref2: Unable to add Essbase Server from Administration Services
I have the same problem as the posts above. There are no conclusions for above posts, does anyone here know how to fix this problem as it seems very common.
In my situation, I'm sure essbase is setup well and everything ran well. I started using IR connecting to essbase and done about 10 reports.
Until today, I am trying to test these reports by sending huge amount of data to Essbase.
Then retrieving the problem below when downloading to results:
Network error [10061]:unable to connect to [server c-noia-131 1423]
the client timed out waiting to connect to analytic services agent using TCP/IP check your connections also make sure that server and port values are correct
Any ideas how to solve this problem?

Hey.
Adapter unable to recorginise the Jar file you have deployed, Did you mentioned the JAR file in Provider.xml file ?
Are you able to ping the DB2 server ?
Cheers
Agasthuri

Similar Messages

The client timed out waiting to connect to the Essbase Server using TCP/IP

Hi,All
When I deploy the HPCM application to essbase, i received the following message below in the log file hpm.log
2009-02-20 13:34:50,389 [Thread-115] ERROR com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator: error setting measures dimension member properties
com.hyperion.profitability.data.mdb.essbase.MDBException: Error setting member property share option to store_data for member: D0900SB
     at com.hyperion.profitability.data.mdb.essbase.MDBMember.setShareOption(MDBMember.java:413)
     at com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator.setMemberProperties(CubeGenerator.java:1232)
Caused by: com.essbase.api.base.EssException: (1290001): Network Error [10061]: Unable To Connect To [hypeion:32776]. The client timed out waiting to connect to the Essbase Server using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOlapMetaDataService.ex_olap(Unknown Source)
And the Essbase service is up.
Pls help!
Shen.

If you are installing on Windows, there is a limitation in the default configuration of TCPIP. I wrote about it, and included the steps to fix it, on my blog at http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html.
Note the error number you reported is slightly different than what I write about in the blog, but I believe I have seen this error fixed by the blog steps..
Tim Tow
Applied OLAP, Inc

Qmaster error: shared storage client timed out while subscribing to...

Here's my Qmaster setup:
computer 1: CONTROLLER, no nodes
- 8TB RAID hooked up via Fiber
- connected to the GigE network switch via a 6-port bond
- cluster storage set to a path on the RAID
computers 2, 3, 4, 5: RENDER NODES
- each computer has a 2-port bonded connection with the GigE switch
computer 6: Client, with FCS2 installed.
- connected with a single GigE link
I have set up this cluster primarily for command-line renders, and it works great. I submit command-line renders from the client computer, which get distributed and executed on each node. The command line renders specify a source file on the RAID, and a destination path on the RAID. Everything works great.
I run into trouble when trying to use Compressor with this same setup. The files are on the RAID, and all my computers have an NFS automount that puts it in the /Volumes folder on each computer.
I set up my Compressor job and submit it to the cluster. It submits sucessfully, and distributes the work. After a few seconds, each node gives me a timeout error:
"Shared storage client timed out while subscribing to [computer1.local/path to cluster storage]"
Is this a bandwidth issue? Command line renders work fine, I can render 16 simultaneous Quicktimes to the RAID over NFS. I don't see much network activity on any of the computers when it's trying to start the Compressor render, it's as if it's not even trying to connect.
If I submit the SAME compressor job to a cluster with nodes ONLY on the controller computer, it renders fine. Clearly the networked nodes are having trouble connecting to the share for some reason.
Does anybody have any ideas? I have tried almost everything to get this to work. Hooking up each node locally to the RAID is NOT an option unfortunately.

WELL I DO NOW!
Thanks. it's taken 6th months and several paid 'professionals' and then you come in here...swinging your minimalist genius. one line. one single line. and its done.
if you are in london, lets lift a beer or five together.
thank you sir. thankyou!

Shared storage client timed out error

Hello everybody, please help
I have been at this now for about 2 days and still can't find out the source of my issue using FCP to render a project through compressor to multiple macs using Qmaster.
What is happening is that I start the render and it gets sent to the second computer, I can see the prosessor ramping up then after (+-) 30 seconds I get the error bellow, and the render fails.
Here is my set up:
MacBook1 as the cluster controller
Macbook2 as the service node
connected via a gigabyte switch using an ethernet cable
The error I keep getting is this ("Macintosh-7" is the name of MacBook1, "chikako-komatsus-computer" is the name of MacBook2):
3x HOST [chikako-komatsus-computer.local] Shared storage client timed out while subscribing to "nfs://Macintosh-7.local/Volumes/portable/Cluster_scratch/4AD40699-B5BD6A1A/sha red"
The volume mentioned above in the error is a shared Fire wire drive connected to the MacBook1. It is have full read and write privileges to everyone. This drive is where the project file and all the source video are located. MacBook1 via the Qmaster system preferences is pointing to a folder "Cluster_scratch" on this drive.
I have been mounting this drive from macBook2 using the connect to sever option in the finder under Go menu. This method seems to only enable me to connect to this drive using AFP, is this my problem?
I have "allowed all incoming traffic" of the fire wall on the MacBook1
What is funny (not really) is that i can Compress a previously compiled video with the cluster If I don't go thou Final Cut Pro!
Any help with this would be greatly appreciated.
Thanks

I also administer a managed cluster with 6 machines, and have been using it successfully for almost a year now. But the only encoding that is submitted is directly through Compressor, never via FCP.
With QMaster, it sees a Quickcluster and a managed cluster the same way. While they are set up differently, the principle is the same, QMaster only sees services.
Exporting out of FCP to any cluster has always been slow. If you want to harness the power of distributed encoding, you could export a Quicktime reference file and take that into Compressor to be submitted to the cluster for encoding.

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

HT4628 some times my internet connection will say it has timed out and I can not connect. but my friends mac never has a problem. How can I fix this?

some times my internet connection will say it has timed out and I can not connect. but my friends mac never has a problem. How can I fix this?

Just confirming, when you have the trouble, the wifi icon is grayed-out or has all bars showing? I believe you are saying that is is grayed-out - not connected to your wireless router.
I have a Mini that started to lose connection to the Internet after the 10.7.3 update but still showed the wireless as connected. If I pinged the wireless router, I would get a quarter of the packets failing to return. The router was a Netgear that supported 802.11N connections. As a test, I set it to 802.11G (54MBps) maximum and the Mini worked fine for a week - no dropouts. And for the other devices that did support 802.11N, while there was a noticeable delay with downloads and pages loading, they still worked.
As another test, I changed the Netgear router to a Billion 802.11N model and the Mini has not had a problems since. (It is still using 802.11g). So it could be your router that is causing trouble for your Mac.
Have a look at some of the More Like This postings in the right column. There has been a number of Mac owners experiencing wifi connection issues and some very good suggestions as to how to resolve their issue.

Iphone 5 Screen is Frozen Connection Timeout Error Connection to this app has timed out

I upgraded to IOS 7 just a few hours before my Iphone 5 screen froze and I cannot make changes - I have a Connection Timeout Error with Connection to this app has timed out. With Ok in blue. The screen doesn't respond, I can turn off the phone, tap OK or do anthing. Any advice on how I can reset or fix?

Check for any anti-virus or anti-spyware software you might have. Temporarily disable that to continue. Normally this is what will cause a timeout. I assume you have a good Internet connection?

Client Timed Out While Answering Challenge HELP please!

ok, so i just added a WPA password to our airport extreem so my neighbor would stop using it. this worked, and for a second it seemed to be running good. now though when im on using bootcamp, running counter strike every time i try to join a server this error message comes up "Client Timed Out While Answering Challenge", and i have no clue why and its really ticking me off. The internet works fine on the windows side, and counter strike worked ok before i set the WPA passoword except real slow because of my neighbor using it. but no this error message is very annoying and if anyone knows how to get rid of it please help.

Close itunes then
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again

Itunes could not connect to iTunes Store-Network timed out. Upgraded to 7.6

I upgraded this morning and was able to buy tracks. Now I get "Itunes could not connect to iTunes Store.The Network connection timed out. Running Nework Connectivity Test shows everything ok. Apple Sw Update application shows the same behavior. All of my other applications and programs run normally. I can surf web ok.
Can someone help me?

Search the forums. This is an old problem. For almost everyone it's a Norton issue. I had to upgrade from Norton 360 V1 to V2 to solve the problem. With otehr versions of Norton people have been able to create an entry in the firewall's allowed sites and that fixed it. If nothing else call Norton. They should have had enough calls by now they'll be able to tell you how to fix it for your version of Norton.

Mobile Hotspot Says I'm connected to internet, but websites timing out

Hello, I just got mobile hotspot for my Thunderbolt. I am connecting to the network and it is saying I have internet access, however when I try and load a website they are timing out.
To make matters stranger, my computer is showing recieving and sending packets, and I had a youtube vdeo half loaded, and it streamed the rest. But when I click on new websites it is saying connection timed out.
All help is appreciated thanks!

This has happened to me in the past. I've seen a few others report similar issues. I'll assume you've already tried the standard solutions (reboot, battery pull, reseat the SIM card).
Have you tried connecting to the hotspot with another computer? Have you tried a direct USB connection rather than a WiFi connection?
For me, the solution was to turn off Auto Sync before using the hotspot feature (Menu -> Settings -> Accounts and Sync, and then uncheck Auto Sync). Don't know why this worked, but it did.
If the above doesn't work for you, it could be a network-related issue. To test this, try the following:
Can you ping sites from your computer when the browsing ability is down?
If no, then it sounds like a DNS issue. In this case, try accessing a website by using its IP address rather than its domain name. For example, 206.112.186.66 is the IP address of lowes.com. If you can access a site via the IP address but not via the domain name, then it's a DNS problem. Call VZW tech support to report it. Use different DNS servers (e.g., Open DNS) in the meantime.
If you can still ping sites, then it's not a DNS issue. So, next, try using a proxy server--such as proxify.com--to access the web. If the the proxy server works, then you should call VZW support to report the problem, since it's clearly an issue on their end with specific sites.
When calling into support, let me forewarn you: Give yourself an hour or more for them to walk you through the usual steps (reboot, battery pull, reseat the SIM card). Also, if they assign you a trouble ticket, don't expect to be called back within the promised 48 hours (it's more like 2+ weeks). Instead, you have to be assertive and keep calling them back.

Connection to host service 3299 timed out

Hi all,
When SAP tries for logging in to our quality servers SAP is having timed out issue.
"Connection to host 204.103.218.70 service 3299 timed out".
But our quality ip address is 204.103.218.73.
Please help me out as we need to perform critical tests.
Thanks in advance,
chandu

> "Connection to host 204.103.218.70 service 3299 timed out".> But our quality ip address is 204.103.218.73.
Hi,
It seems the IP which is registered in SAP is 204.103.218.70 as host.Have you change the host of saprouter recently.
Check your SAProuter configuration.
At the same time check the saprouttab
Make the following changes in the hosts file and services file (under windows\system32\drivers\etc folder ) SAP-ROUTER system
hosts file:
<what ip here maintain whether its 204.103.218.70 or 204.103.218.73> SAP-ROUTER
194.39.131.34 sapserv2
services file:
sapdp99 3299/tcp
sapgw99 3399/tcp
sapmsO01 3601/tcp

[SOLVED] Issue with eth0 (eth0: timed out)

Hi there people, just installed Arch on my PC (again). The first time I had no problems with this, but now it is really bothering me. Well, my PC only access the net via wireless, so I have no wired connection for it. Here's my /etc/rc.conf:
# /etc/rc.conf
eth0="dhcp"
wlan0="dhcp"
wlan_wlan0="wlan0 essid MySpot key ABCDEFABCDEF1234567ABCDEFC"
INTERFACES=(eth0 wlan0)
Well, everything is working fine, I can get access to the internet on bootup. My only concern is that my system is taking awfully long to boot. It takes about 1-2 minutes on "::Starting Network", then it shows me "eth0: timed out". Then it takes about 10 secs to start my wlan0 interface and the system finishes booting. I had previously installed Arch 2008.12, and the Starting Network only took about 10 secs to start my wlan0. I have already tried commenting out the eth0 line and putting a ! in front of eth0 on INTERFACES, but doing that only shows me an error message for my wlan0 and render my internet unusable on system bootup. So, my questions are:
1) Do I really need the eth0 interface for my connection (since I'm using wlan0 for wireless connection) ? Why can't I comment it out?
2) If I really need eth0, how can I make my boot time go faster, or how can I make it not time out?
Thanks in advance for any help given...
EDIT: problem solved, see Post 8 below for answers...
Last edited by gabscic (2009-03-25 03:40:43)

Thanks for answering. Well, I think eth0 is being detected correctly. Here is the output for ifconfig:
eth0 Link encap: Ethernet Hwaddr 00:18:F3:87:97:41
UP BROADCAST MULTICAST MTU: 1500 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19
lo Link encap: Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU: 16436 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap: Ethernet Hwaddr 00:15:AF:09:BC:E7
inet addr: 192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets:1903 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:615024 (606.6 Kb) TX bytes:1020 (1020.0 b)
wmaster0 Link encap: UNSPEC Hwaddr 00-15-AF-09-BC-E7-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Well, I hope that can help. Searched the net and the forums, and every problem related to this is with people who are actually trying to use the eth0 interface for connection. In my case, I don't think I need it, I only need the wlan0. What I'm trying to do is get rid of eth0 while letting wlan0 work.

Connection to oracle9i error (ping timed out after connecting to database )

i have problem wtih connection to database.
ping to server is ok , port 1521 is open
when i want to connect to database , ping to server timed out
i have a distance between my pc and my server , about 100 m
cable utp
any solution for my problem

c:\> ping 10.1.110.1
Reply from 10.1.110.1: bytes=32 time<1ms TTL=128
C:\>tnsping 10.1.110.1
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 29-NOV-20
07 15:33:09
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
D:\oracle\ora92\network\admin\sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SID=*)(SERVICE_NAME=10.1.110.1
))(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.110.1)(PORT=1521)))
TNS-12535: TNS:operation timed out
my sqlnet file
# SQLNET.ORA Network Configuration File: D:\oracle\ora92\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)

Connection to host, service sapdb00 timed out

Dear Friends
I am trying to use SAP R/3 system at my office from my home through VPN. I have got a broadband connection with a wireless modem and When I try to connect to my office via VPN from my laptop it connects, but after this when I try with SAP login, it refuses the login and displays a message "connection to host xxx.xxx.xxx.xxx, service sap db00 timed out. Do you want to see the detailed error description?" (xxx.xxx.xxx.xxx is the ip address of the office) When I say yes, it displays the following message.
connection to host xxx.xxx.xxx.xxx, service sap db00 timed out.
time: Fri May 19:.......
component: NI (network interface)
Release: 640
version: 37
module: nixxi_r.cpp
Line:1067
Method:NIPConnect
return code:-12
Counter: 1
But I could connect to the same SAP system with the same laptop through VPN using an unsecured wireless network at the vicinity of my office. Also my colleagues with the same settings could connect to the same SAP system from their homes.
Can anybody experienced similar problems? help me please in this problem. Thank you in advance.
with regards
Pahee

Pahee
I am also getting the exact error.Would be thankful if you could let me know how you solved this problem ? My email is [email protected]
Thanks
Harish Swaminathan

Connection to production server giving timed out error

when I'm trying to connect to production server , through Look up or an OLDB source ..
it is giving timed out error. this is while designing the package..
is there other option to avoid this error.

Are you using Windows Authentication?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

IR - Connection Issue to Essbase, client timed out

Similar Messages

Maybe you are looking for