IR: Display single row of data over multi report rows.

In an interactive report, is it possible to display the data from one database row over two or more displayed rows on a page?

Corvette Captain wrote:
In an interactive report, is it possible to display the data from one database row over two or more displayed rows on a page?Yes. Create the required structure using the Detail View properties.
Users can switch between views using the view controls. You can display the report in Detail View by default via a Dynamic Action: +{thread:id=2187972}+

Similar Messages

Copy a certain row of data into the next row in a same internal table ??

HI, guys.
May i know how to copy a certain row of data into the next row in a same internal table ?? Bcz I plan to update a certain colum of data in the row just now into another value..
For example:-
*at first...
ebeln1   ebelp1   xblnr1
ebeln2   ebelp2   xblnr2
ebeln3   ebelp3   xblnr3
*after that, become...
ebeln1   ebelp1   xblnr1
ebeln2   ebelp2   xblnr2
ebeln2   ebelp2   xblnr4
ebeln2   ebelp2   xblnr5
ebeln3   ebelp3   xblnr3
Thanks in advance.

hi,
If you have this kind of requirement then you must be having 2 internal tables ,one existing data and 2nd from which you have to insert the records into 1st table.
so in this case,
loop at itab1.
v_index = sy-tabix.
loop at itab2 into wa where pri_key = itab1-pri_key.
v_index = v_index + 1.
insert wa into itab index v_index.
endloop.
endloop.
Using this code ,your data records similar to your 1st tables primary key records will get inserted into table.

Retrieve 3 rows of data and put each row in different position on screen

I need to retrieve 3 consecutive rows of data (easy) and need to put each row's data in an entirely different location on the home page
for example,
row 1 needs to go up in the top left content box
row 2 needs to go in the large content area in the middle of the page
row 3 needs to be put down in the footer of the page
what's the most efficient way to do this ?

Ok, I've tried to research this a bit more, but I'm no further forward
So if I have a query...
<cfquery name="getData" datasource="foo">
SELECT *
FROM 00_pricelist
</cfquery>
<cfoutput query="GetData" startrow=1 maxrows=3 >
 
 #getData.uneak_code[1]# 
 
 #getData.uneak_code[2]# 
 
 #getData.uneak_code[3]# 
</cfoutput>
can you tell me what I'm doing wrong ?

Displaying operating unit specific data in Discoverer Report ????

Hi Experts,
My Requirement : I need to develope one custom report where it has to display operating unit specific data based on the resposibility selection in Discoverer.
My Approach : I prepared the below query and I am trying to pick Business_group_id from profile options and passing to the query.(You can observe the condition which is highlighted as red color)While i am running the query I am getting zero records.
Please suggest me how to achieve the my requirement of displaying operating unit specific data in Discoverer.
SELECT A1.PERSON_ID
 ,A1.employee_number
 ,A1.first_name
 ,A1.last_name
 ,A1.known_as PREFERRED_NAME
 ,A1.GENDER
 ,A1.date_of_birth
 ,A1.Marital_status
 ,A1.original_date_of_hire
 ,A1.Organization
 ,A1.Location
 ,A1.Job_name
 ,A1.OLF_DEPARTMENT
 ,A1.OLF_DEPT_SUBGROUP
 ,A1.salary
 ,A1.salary_change_date
 ,A1.HIRE_DATE
 ,A2.PERSON_ID SUPERVISOR_ID
 ,A2.EMPLOYEE SUPERVISOR
 ,A3.PERSON_ID SUPERVISOR_ID_1
 ,A3.EMPLOYEE SUPERVISOR_NAME_1
FROM (
SELECT PAPF.first_name
 ,PAPF.last_name
 ,papf.known_as
 ,papf.sex GENDER
 ,papf.date_of_birth
 ,papf.marital_status
 ,papf.employee_number
 ,PAPF.person_id
 ,PAAF.supervisor_id
 ,PAPF.original_date_of_hire
 ,(SELECT name FROM hr_all_organization_units WHERE Organization_id=PAAF.organization_id) Organization
 ,(SELECT location_code FROM hr_locations WHERE location_id=PAAF.Location_id) Location
 ,(SELECT name FROM per_jobs WHERE job_id=PAAF.job_id) Job_name
 ,PPP.proposed_salary_n SALARY
 ,ppp.change_date salary_change_date
 ,ppgk.segment1 OLF_DEPARTMENT
 ,ppgk.segment2 OLF_DEPT_SUBGROUP
 ,papf.original_date_of_hire HIRE_DATE
FROM per_all_people_f PAPF
 ,per_all_assignments_f PAAF
 ,per_pay_proposals PPP
 ,PAY_PEOPLE_GROUPS_KFV ppgk
WHERE 1=1
 AND PAPF.person_id=PAAF.person_id
 AND papf.business_group_id=paaf.business_group_id
 AND PAAF.assignment_id=PPP.assignment_id
 AND paaf.people_group_id=ppgk.people_group_id
 AND ppp.change_date =(SELECT MAX(change_date)
 FROM per_pay_proposals
 WHERE assignment_id=PPP.assignment_id)
 AND SYSDATE BETWEEN PAPF.effective_start_date AND PAPF.effective_end_date
 AND SYSDATE BETWEEN PAAF.effective_start_date AND PAAF.effective_end_dateAND PAPF.BUSINESS_GROUP_ID = TO_NUMBER(FND_PROFILE.VALUE('PER_BUSINESS_GROUP_ID '))
) A1
SELECT PAPF.first_name
||','||PAPF.last_name EMPLOYEE,PAPF.PERSON_ID,PAAF.supervisor_id
FROM per_all_people_f PAPF
 ,per_all_assignments_f PAAF
WHERE PAPF.person_id=PAAF.person_id
AND papf.business_group_id=paaf.business_group_id
 AND SYSDATE BETWEEN PAPF.effective_start_date AND PAPF.effective_end_date
 AND SYSDATE BETWEEN PAAF.effective_start_date AND PAAF.effective_end_date
) A2
SELECT PAPF.first_name
||','||PAPF.last_name EMPLOYEE
 ,PAPF.PERSON_ID
 ,PAAF.supervisor_id
FROM per_all_people_f PAPF
 ,per_all_assignments_f PAAF
WHERE PAPF.person_id=PAAF.person_id
AND papf.business_group_id=paaf.business_group_id
 AND SYSDATE BETWEEN PAPF.effective_start_date AND PAPF.effective_end_date
 AND SYSDATE BETWEEN PAAF.effective_start_date AND PAAF.effective_end_date
) A3
WHERE 1=1
AND A2.PERSON_ID(+)=A1.SUPERVISOR_ID
AND A3.PERSON_ID(+)=A2.SUPERVISOR_ID
AND A4.PERSON_ID(+)=A3.SUPERVISOR_ID
;

you are in the wrong forum, try an ebusiness-related forum, maybe this OA Framework

Looping over multiple rows of data to output one row

My query is giving me the appropriate data, but I need to
only have one row per 'MANAGER' in my output - not one for each
'JOB'. Now the output looks like this:
manager 1 ... period 1 $ .... period 2 $ .... period 3 $
manager 1... period 1 $ .... period 2 $ .... period 3 $
manager 1... period 1 $ .... period 2 $ .... period 3 $
manager 1... period 1 $ .... period 2 $ .... period 3 $
manager 2... period 1 $ .... period 2 $ .... period 3 $
manager 2... period 1 $ .... period 2 $ .... period 3 $
manager 2... period 1 $ .... period 2 $ .... period 3 $
manager 2... period 1 $ .... period 2 $ .... period 3 $
It needs to be:
Manager 1 ... total period 1 $ .... total period 2 $ ....
Manager 2 ... total period 1 $ .... total period 2 $ ....
Any help would be wonderful. I am really new at something
this complex. Thanks!!!

To fix your immediate issue, you need to order and group by
manager, not MPR_ID (whatever that is).
What is dm_id? Use descriptive names!
Anyway, change the ORDER BY clause to:
ORDER BY
RR.LastName+', '+RR.FirstName, 
AA.MPR_ID
Then change the first <cfoutput> to:
<cfoutput query="production" group="Rep_name">

Function module to display the time and date in the report-sy-udate And s

Hi.
wish to have a function module which can display the system time and date through function module.
the format that this function module should display should be like this:
if its today-date and time then:
05-Jan-08 01.25.57 PM
please note that i want them to be in one single row in the top-of page
kinldy help on this.
thanks!

hi,
check this.
https://forums.sdn.sap.com/click.jspa?searchID=19175181&messageID=4628668
Thanks

Select Row as Data filter between Report viewer webpart

Hi All,
i have a requirement in SharePoint 2013 which has 2 SSRS Report Viewer webpart.
i need to pass data which i select in First webpart to second webpart.
is this possible how can i achieve this.
Thanks for your time.
Regards
Bhasker
hi

Hi Bhasker,
In my opinion, you can refer to the steps as below:
1.Get the parameters from one SSRS Report Viewer Web Part:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/454ae44f-0d29-485a-8830-d2fb0e03f250/how-to-pass-parameters-from-report-viewer-to-report-server?forum=sqlreportingservices
http://msdn.microsoft.com/en-us/library/ff487390.aspx
2.Pass parameters to another SSRS Report Viewer Web Part:
http://sharepoint.infoyen.com/2012/08/25/pass-multiple-filter-parameters-to-custom-report-viewer-web-part/
http://stackoverflow.com/questions/2564178/passing-multiple-parameters-from-custome-webpart-to-reporting-services-report-vi
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Adding rows based on current and next row

I got some excellent help on multiplying rows based on start and end date in this
thread, resulting in the query below. It helps me follow Vehicle activity and Vehicle allocation of our vehicles day by day. Now I would like to add another feature to the query, if it is possible.
The problem is that in our database, only actual tasks are registered, which means that the time when the vehicle is between tasks is not showing. I could of course calculate total available time per vehicle and month, but that would not tell me where the
vehicles are waiting, when during the day, etc.
So I would like to insert rows for when the vehicles are standing still, and the logic would be something like this:
If vehicle number on current row equals vehicle number on the next row and End (date/time) of current row < Start (date/time) of next row, insert row after current row. Set Start=End of current row and End=Start of next row. Set From=To
of current row and To=To of current row. Set Vehicle activity to "Not active". Finaly copy all other fields from current row.
Is this possible to achieve in Power Query?
Brgds,
Caj
let
 Source = Sql.Databases("sql10"),
 SLM = Source{[Name="SLM"]}[Data],
 dbo_V_LKPI = SLM{[Schema="dbo",Item="V_LKPI"]}[Data],
 RenamedColumns = Table.RenameColumns(dbo_V_LKPI,{{"ActualDeparture", "Start"}, {"ActualArrival", "End"}}),
 Records = Table.ToRecords(V_LocoKPI),
 DateTime.IsSameDay = (x, y) => Date.Year(x) = Date.Year(y) and Date.Month(x) = Date.Month(y) and Date.Day(x) = Date.Day(y),
 Expand = (x) => List.Generate(
 () => Record.Combine({x, [End=Date.EndOfDay(x[Start])]}),
 (record) => record[Start] <= x[End],
 (record) => let
 NextStart = Date.StartOfDay(Date.AddDays(record[Start], 1)),
 NextEnd = Date.EndOfDay(NextStart),
 ThisEnd = List.Min({NextEnd, x[End]})
 in
 Record.Combine({record, [Start=NextStart, End=ThisEnd]})),
 Transformed = List.Transform(Records, each if DateTime.IsSameDay([Start], [End]) then {_} else Expand(_)),
 Combined = List.Combine(Transformed),
 Result = Table.FromRecords(Combined)
in
 Result
Csten

Here's some sample code. Again, we use List.Generate to build either a record or a list of records and then use List.Combine to bring the results back together before converting them to a table.
let
 CombineTwoRows = (x, y) =>
 let
 combine = x[Vehicle] = y[Vehicle] and x[End] < y[Start],
 added = Record.Combine({x, [Start=x[End], End=y[Start], Active=false]}),
 result = if combine then {added, y} else {y}
 in result,
 GenerateStandingRows = (table, combine) =>
 let
 Handle = (x, y) => {x, y},
 buffered = Table.Buffer(table),
 n = Table.RowCount(buffered),
 windows = List.Generate(
 () => {1, {buffered{0}}},
 (x) => x{0} <= n,
 (x) => {x{0} + 1, if x{0} < n then combine(buffered{x{0}-1}, buffered{x{0}}) else {buffered{x{0}}}},
 (x) => x{1})
 in
 windows,
 InsertInactivity = (table) => Table.FromRecords(List.Combine(GenerateStandingRows(table, CombineTwoRows))),
 TestData = Table.FromRows({
 {1, #datetime(2014, 2, 23, 13, 0, 0), #datetime(2014, 2, 23, 13, 10, 0), true},
 {1, #datetime(2014, 2, 23, 13, 20, 0), #datetime(2014, 2, 23, 13, 30, 0), true},
 {2, #datetime(2014, 2, 23, 13, 20, 0), #datetime(2014, 2, 23, 14, 0, 0), true},
 {2, #datetime(2014, 2, 23, 14, 20, 0), #datetime(2014, 2, 23, 14, 40, 0), true},
 {2, #datetime(2014, 2, 23, 16, 0, 0), #datetime(2014, 2, 23, 17, 0, 0), true},
 {2, #datetime(2014, 2, 24, 2, 0, 0), #datetime(2014, 2, 24, 3, 0, 0), true},
 {3, #datetime(2014, 2, 24, 1, 0, 0), #datetime(2014, 2, 24, 8, 0, 0), true},
 {3, #datetime(2014, 2, 24, 9, 0, 0), #datetime(2014, 2, 24, 10, 0, 0), true}
 }, {"Vehicle", "Start", "End", "Active"})
in
 InsertInactivity(TestData)

Multiple clobs in a single row of data

I have several clobs in a single row of data and have created a procedure where I attempt to display the first 4k of each clob.
using a for loop cursor I select all of the clobs in a row at the same time and then I use dbms_lob.read to get the first 4k of data.
For the first lob of each row everything works fine but when I attempt to dbms_lob.read the second one I get an "ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275" and I'm not sure why?
does anyone know of an example where two or more clobs are selected and then converted to 4K varchars?
sample columns for the table:
SPECIALREQUIREMENTSS     CLOB
REFERENCERANGE     CLOB
ALERTVALUE     CLOB
REFERENCELAB     VARCHAR2(50 CHAR)
TESTINCLUDES     CLOB
LASTUPDATE     DATE
sample code (I removed some code for clairity - this produces the same error):
create or replace
procedure test_lobs as
v_lab_blob blob;
v_lobamt binary_integer := 32767;
v_lobpos pls_integer := 1;
v_labrec labman.lab_testingdata%rowtype;
v_buffer varchar2(32767) :='';
v_start_left number;
begin
-- *** housekeeping
dbms_lob.createtemporary(v_labrec.testincludes,TRUE);
dbms_lob.createtemporary(v_labrec.specialrequirementss,TRUE);
Plpdf.init;
Plpdf.NewPage;
Plpdf.SetColor4Drawing(66,66,66);
Plpdf.SetColor4Filling(180,180,180);
v_start_left := Plpdf.GetPageWidth-Plpdf.GetPageRightSpace;
-- *** select the test name for shaded printing
for x in (select indexnumber, test from labman.lab_testingdata where test like 'A%') loop
-- *** select the test data for printing
select * into v_labrec from labman.lab_testingdata where indexnumber = x.indexnumber;
-- *** test includes
if dbms_lob.getlength(v_labrec.testincludes) > 0 or v_labrec.testincludes is not null then
Plpdf.SetPrintFont('Arial','B',8);
Plpdf.LineBreak(.1);
Plpdf.PrintCell(25,5,'Test Includes:',0,0,'R',0,null,0);
Plpdf.SetPrintFont('Arial',null,8);
if dbms_lob.getlength(v_labrec.testincludes) > 32767 then
v_buffer := '*** error - text is greater than 32k ***';
else
v_lobamt := 32767;
v_buffer := '';
dbms_lob.read(v_labrec.testincludes,v_lobamt,v_lobpos,v_buffer);
end if;
Plpdf.SetLeftMargin(Plpdf.GetCurrentX);
Plpdf.PrintFlowingText(5,v_buffer,null,0);
Plpdf.SetLeftMargin(v_start_left);
Plpdf.lineBreak;
end if;
-- *** special requirements
Plpdf.SetPrintFont('Arial','B',8);
Plpdf.LineBreak(.1);
Plpdf.PrintCell(25,5,'Special Requirements:',0,0,'R',0,null,0);
Plpdf.SetPrintFont('Arial',null,8);
if dbms_lob.getlength(v_labrec.specialrequirementss) > 32767 then
v_buffer := '*** error - text is greater than 32k ***';
elsif dbms_lob.getlength(v_labrec.specialrequirementss) = 0 then
v_buffer := '';
else
v_lobamt := 32767;
v_buffer := '';
dbms_lob.read(v_labrec.specialrequirementss,v_lobamt,v_lobpos,v_buffer);
end if;
Plpdf.SetLeftMargin(Plpdf.GetCurrentX);
Plpdf.PrintFlowingText(5,v_buffer,null,0);
Plpdf.SetLeftMargin(v_start_left);
Plpdf.lineBreak;
commit;
end loop;
Plpdf.SendDoc(v_lab_blob);
-- store the PDF document
delete from store_blob;
commit;
INSERT INTO STORE_BLOB (blob_file, created_date)
VALUES (v_lab_blob, SYSDATE);
COMMIT;
end test_lobs;

didn't think that checking for a length of zero and null would produce two different results - should have known better.
Thanks for your help!
elsif dbms_lob.getlength(v_labrec.specialrequirementss) = 0
or v_labrec.specialrequirementss is null then

How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

After the discovery reported above, I filed this report :
Bug ID# 10073038
Summary:
When Numbers is used on a system with decimal comma a csv file may be good AND wrong
Steps to Reproduce:
With Numbers v2, you introduced an interesting enhancement.
In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
This said.
(1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
(2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
Expected Results:
Every normally constituted user assume that in
case (1) he will get a perfectly built table
case (2) he will get every cells of a row in a single cell
Actual Results:
In fact you forgot the drag and drop way of use and in
case (1) every values separated by semi-colon are inserted in a single cell
case (2) values separated by comma are correctly spread in a table
isn’t it ridiculous ?
Regression:
Except looking in QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
or
to replace the commas by TABs and the decimal periods by commas
Notes:
While I am on this subject, I wish to make two proposals:
(1) It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
Doing that, dates would be imported correctly in every countries.
At this time, on an English system, you export as mm/dd/year.
If the doc is open on a system using the format dd/mm/year, the results will be odd.
On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
(2) It would be fine to add the format Tab Separated Values in the Export pane.
TSV + ISO date format would give documents opening flawlessly everywhere.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How to display rows of data in JSP?

Hi,
I am learning Servlet and JSP. There is an exercise which requires us to access a database from a Servlet and display the retrieved data in a JSP.
Now I am ok with the database connection. So how to display the data using some kind of loop?
Regards

They're called ResultSets and they are returned when you execute a query from a Statement. The next() method will tell you whether or not you have another row of data to read.

Requirement to display more than 65K rows of data

Has anyone addressed the issue of Excel not being able to provide more than 65K rows of data with the users? I am working with users whom are concerned about Excel not being able to provide more than 65K rows of data.
Why would you use BI reporting to report on data more than 65K rows of data. Has anyone designed any reports with more than 65K rows of data. I would imagine that BI reporting is for summarization and it is an on line analytical tool and not a data producing or recording tool.
Is there a work around if the requirement is to display more than 65K rows of data? Has anyone been asked to do this kind of reporting?

Hi,
Please make a search in SDN.This topic has been discussed many times.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums&query=65k&adv=true&sdn_author_name=&sdn_allusernamesofthread=&sdn_category=&sdn_forum=&sdn_updated_on_comparator=ge&sdn_updated_on=
Regards.

How to loop through a single row of data?

What I'm trying to do is use a cursor to loop through a clob. When I create my cursor I get the an error telling me that the table does not exist. Which implies that I have an implicit cursor. Is there a way to get around this?

> How to loop through a single row of data?
By not looping as there is only a single row?
> What I'm trying to do is use a cursor to loop through a clob
Processing (looping through) a CLOB has nothing to do with a cursor.
> When I create my cursor I get the an error telling me that the table does
not exist. Which implies that I have an implicit cursor.
Incorrect. It simply means that
a) you do not have permissions to access that table from within the current context
b) it does not exist (e.g. you have misspelled the object name, you have not qualified it properly within the current scope, etc)

How to display rows of data into different columns?

I'm new to SQL and currently this is what I'm trying to do:
Display multiple rows of data into different columns within the same row
I have a table like this:
 CREATE TABLE TRIPLEG(
 T# NUMBER(10) NOT NULL,
 LEG# NUMBER(2) NOT NULL,
 DEPARTURE VARCHAR(30) NOT NULL,
 DESTINATION VARCHAR(30) NOT NULL,
 CONSTRAINT TRIPLEG_PKEY PRIMARY KEY (T#, LEG#),
 CONSTRAINT TRIPLEG_UNIQUE UNIQUE(T#, DEPARTURE, DESTINATION),
 CONSTRAINT TRIPLEG_FKEY1 FOREIGN KEY (T#) REFERENCES TRIP(T#) );
 INSERT INTO TRIPLEG VALUES( 1, 1, 'Sydney', 'Melbourne');
 INSERT INTO TRIPLEG VALUES( 1, 2, 'Melbourne', 'Adelaide');
The result should be something like this:
> T# | ORIGIN | DESTINATION1 | DESTINATION2
> 1 | SYDNEY | MELBORUNE | ADELAIDE
The query should include the `COUNT(T#) < 3` since I only need to display the records less than 3. How can I achieve the results that I want using relational views???
Thanks!!!

T#
LEG#
DEPARTURE
DESTINATION
1
1
Sydney
Melbourne
1
2
Melbourne
Adelaide
1
3
Adelaide
India
1
4
India
Dubai
2
1
India
UAE
2
2
UAE
Germany
2
3
Germany
USA
On 11gr2, you may use this :
SELECT t#,
 REGEXP_REPLACE (
 LISTAGG (departure || '->' || destination, ' ')
 WITHIN GROUP (ORDER BY t#, leg#),
 '([^ ]+) \1+',
 '\1')
 FROM tripleg
 where leg#<=3
GROUP BY t#;
Output:
1 Sydney->Melbourne->Adelaide->India
2 India->UAE->Germany->USA
Cheers,
Manik.

Display of 2 rows of data for 2 different date range selection

Hi Folks,
I have a requirement as follows,
User has an option of selecting 2 Date Ranges
From and To Date and again From and To Date
The result should display 2 different rows of data with From and To Date range selection.
Eg:
12/09/20008 to 03/09/2009           10 20 30 40
23/10/2009 to 18/12/2010           40 20 10 30
Difference                                   30 0 20 10
% Change                                   x y z   q
Thanks for your input.
Regards,
KJ

You will need to use union report, and you would have fours union's in this report.
Union - 1: Data from 1st Date Range
Union - 2: Data from 2nd Date Range
Union - 3: Variance Calculation
Union - 4: Percentage Variance Calculation.
If the date's are coming from the same field, use cast function to use the same column twice in your prompts. Apply filters on each union as needed.
Thanks.

IR: Display single row of data over multi report rows.

Similar Messages

Maybe you are looking for