IRC Server Config and CGI:IRC

Well, I am trying to set up an IRC server with a web based cgiirc client program. The problem is that I can't get a working server. At all. I really can't get the config file to work for me, it just plain makes no sense. At all. Ever.

Hola Francisco, me parece muy buena idea tu IRC. Hemos detectado la necesidad de tener Soporte para Clientes a trav�s de IRC (Para clientes extranjeros, es fundamental por el ahorro de costes).
Si lo vas a dejar en alg�n sitio estoy muy interesado en verlo y comentar algunas cosas. Hazmelo saber si no es molestia.
Un saludo

Similar Messages

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

Possible to add and persist elements in server config, for use by cons ext?

I'm considering what will be my obstacles if I try to write a console extension that we would use to view excerpts of an application log file, the application of which is deployed to each server in our domain(s). It doesn't log to the WebLogic server log, it writes it to an external log file (through log4j), and each server (several servers on each box) uses a slightly different path to its log file.
One issue that I'll have is getting the console extension to know what the path to the log file is. I think the best way, over all, is just to have the user enter the path in the form presented by the console extension. My problem is how to persist that setting, because I'd prefer they didn't have to enter that every time they entered the form.
Several years ago, I wrote a console extension for WL 8.1.4 which had a similar issue. I ended up simply writing the setting into a properties file inside the extension WAR. This only works (I believe) if the WAR is deployed exploded. I could do that, but I don't like that idea very much.
What would be nice is if I could "extend" the server config.xml with an additional element in the "Server" element, where I could store this information. Unfortunately, I don't see any support for doing something like that.
Another alternative I'm considering is whether it's possible to extend the "Summary of Log Files" page in "Diagnostics" with an application-specific log file, but I don't see any way to do that.

Well, I appreciate the suggestion, but it's not exactly a secret, to me at least. I've used it for human-readable things recently. It occurred to me that that might be my only option, but I certainly wasn't going to assume that. As it seems like this is likely my only option, I guess I can see some interesting conventions for dealing with this. You have to assume that the field could be written to by other code, and that code would have to make the same assumption. I guess I'd have to define a certain XML element as the root of my structure. If I find it, that region between the start and end element is mine to use and modify. If I don't find it, I'll insert my element at the end of the field value.

SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager

I want to cross check the
SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager
for running of SQL SERVER.
I stop SQLEXPRESS instance in one of the above tools but the others become unaware of the latest changes except
Task Manager.
For example when I stop SQL EXPRESS from within SQL Server Congiguration Manager
it still seems working in Windows Administration Tools, Manage Computer windows.
What is the reason for this?

Hi,
Aprat from SQL Server configuration manager all other are windows tool and should not be used to manage SQL Server in anyway. Although I cannot completely understand list of tools you mentioned
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

How to config weblogic 10.3.3 server log and domain log?

I need to change the default logging configuration for both server log and the domain log. The server logging configuration (such as limiting the number of retained log files) can be updated in the Admin console. Howerver there are 100 domains running in a weblogic instance, can this be accomplished by updating a configuration file for each domain instead of going through the web interface?
Also, how can I change the domain log configuration? Is there a configuration file or a command line argument for this?
Thanks,
Hong

Hi Hong,
Based on your requirement we have just created a script for you which would full fill your requirement.
Note: Please the below properties files and the WLST script in the same same location
"*domain.properties*"
domain.count=2
rotationType=bySize
numberOfFilesLimited=yes
fileMinSize=3000
rotateLogOnStartup=yes
fileCount=5
### Domain-1 Details ###
domain.1.name=Domain_7001
domain.1.admin.url=t3://10.10.10.10:7001
domain.1.admin.username=weblogic
domain.1.admin.password=weblogic
domain.1.server.count=2
domain.1.server.1.name=AdminServer
domain.1.server.2.name=MS-1
### Domain-2 Details ###
domain.2.name=Test_Domain
domain.2.admin.url=t3://20.20.20.20:8001
domain.2.admin.username=weblogic
domain.2.admin.password=weblogic
domain.2.server.count=2
domain.2.server.1.name=AdminServer
domain.2.server.2.name=MS-1 Below is the WLST script "*domainLogConfigurtionChange.py*" which would use the above properties file.
# @author Copyright (c) 2010 - 2011 by Middleware Maigc, All Rights Reserved.
from java.io import FileInputStream
propInputStream = FileInputStream("domain.properties")
configProps = Properties()
configProps.load(propInputStream)
totalNumbersofDomains=configProps.get("domain.count")
rotationType=configProps.get("rotationType")
numberOfFilesLimited=configProps.get("numberOfFilesLimited")
fileMinSize=configProps.get("fileMinSize")
rotateLogOnStartup=configProps.get("rotateLogOnStartup")
fileCount=configProps.get("fileCount")
def str2bool(v):
     return v.lower() in ("yes", "true", "t", "1")
domainTmpCount=1
while (domainTmpCount <= int(totalNumbersofDomains)) :
     domainName = configProps.get("domain."+ str(domainTmpCount)+".name")
     domainAdminUrl = configProps.get("domain."+ str(domainTmpCount)+".admin.url")
     domainAdminUserName = configProps.get("domain."+ str(domainTmpCount)+".admin.username")
     domainAdminPassword = configProps.get("domain."+ str(domainTmpCount)+".admin.password")
     serverTmpCount = configProps.get("domain."+ str(domainTmpCount)+".server.count")
     connect(domainAdminUserName, domainAdminPassword, domainAdminUrl)
     print '==============================================='
     print 'Changing Log Settings For Domain....', domainName
     print '==============================================='
     serverTmpCount=1
     while (serverTmpCount <= int(totalNumbersofDomains)) :
          edit()
          startEdit()
          serverName = configProps.get("domain."+ str(domainTmpCount)+".server."+ str(serverTmpCount)+".name")
          print 'Changing Log Setting for serverName: ' , serverName
          cd('/Servers/' + serverName + '/Log/' + serverName)
          cmo.setRotationType(rotationType)
          x = str2bool(numberOfFilesLimited)
          cmo.setNumberOfFilesLimited(x)
          cmo.setFileMinSize(int(fileMinSize))
          cmo.setRotateLogOnStartup(str2bool(rotateLogOnStartup))
          cmo.setFileCount(int(fileCount))
          cmo.setFileName('logs/' + serverName + '.log')
          activate()
          serverTmpCount = serverTmpCount +1
     domainTmpCount = domainTmpCount +1 For more information on how these WLST scripts can be used please refer to the following link
Topic: WLST
http://middlewaremagic.com/weblogic/?page_id=1492
Regards,
Ravish Mody

Customizing server.name and server.port in services-config.xml

Hi
How can i find out what does BlazeDs use for server.name and server.port in
url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
can i customize those values?
thank you

Mete
Thank you for your reply
So context.root is resolved at compile time and server & port at runtime
Do you have an example or a link that shows / explain how to create custom tokens replaced by JVM options?
I have an issue where if i install my app on http://www.mydomain.com/mycontext/, it loads but will display the following message when making server call using Safari
FAULT: faultCode:Client.Error.MessageSend faultString:Send failed faultDetail:Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: http://www.mydomain.com/context/messagebroker/amf
Notte that it works on IE7 when accessing http://www.mydomain.com/mycontext/
and that it works great with all browsers on http://localhost:8080/mycontextroot
Would you know what is the best way to debug this issue?
Thank you
matt

Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?

First of all David you are faster responding to email than I am. Thanks.
We tried your scheme with no luck. You are using "ROOT" as your war file
name ROOT, correct? Are you sure the jsp would reference
"/images/MyProject/nppnback.gif"? Why is "MyProject" in there? Where is
the directory "images" defined to Tomcat? Is it a default?
Here's another try at explaining:
In my JSP I have;
<IMG SRC="/images/ef.gif" ALT=People Banner">
My application is in webapps/EformsAppWar
(jsps in EformsAppWar/EformsApp/eforms/*.jsp)
(classes in EformsAppWar/WEB-INF/classes)
so images are in webapps/EformsAppWar/images
and there is, indeed a ef.gif there.
However with no server.xml changes (everything default), Tomcat 3.2
gives a 404 in his log and states in the 404 message that context is
null (CTX < >) and ca't find /images/ef.gif + NULL.
By the way I just noticed that in Tomcat 3.1 I have the images directory
directly under webapps.
----- Original Message -----
From: "David J.L. Martin" <<a href="/group/SunONE-JATO/post?protectID=114166018056146134184102046176231239071179066034">dave@t...</a>>
Date: Wednesday, May 23, 2001 3:35 pm
Subject: Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?
This works:
If the doc root is webapps\ROOT --
Using defaults...jsp's would be put in
webapps\ROOT\MyProjectApp\MyProject\*.jsp
and images would be put in webapps\ROOT\images\*.gif
Then in your jsp...use the following reference:
"/images/MyProject/nppnback.gif">
That will work just using defaults and not playing with any of the
config files...
ie. webapps\ROOT\WEB-INF gets updated as well (with required
classes).
djm
TechPie
916 924-1832 (office)
916 730-4743 (mobile)
916 313-3531 (fax)
<a href="/group/SunONE-JATO/post?protectID=114232044112042209130232046248130100239179057215113109152006048067">dmushrush@e...</a> wrote:
Many of you are running Tomcat 3.2. Can anyone tell me how to get
images to be served by Tomcat. In 3.1 if I referenced /images/image.gif> in my JSP, I could just place the images
directory in the application
(context) directory.
The default docBase is webapp> that webapp> relative addressed as /images/image.gif but such is not the case.
I have put the images directory almost everyplace possible with no luck.
I have explicitly defined docBase in tomcat/conf/server.xml and still no
luck.
I currently have the following in conf/server.xml
<Context path="/EformsAppWar"
docBase="c:/tomcat/webapps/EformsAppWar"
crossContext="true"
debug="0"
reloadable="true" >
</Context>
I place images in that directory structure but still take 404's and in
the log it refers to context as /images ????
I'm probably doing something (or not doing something) foolish. Anybody> have a remedy.
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>

First of all David you are faster responding to email than I am. Thanks.
We tried your scheme with no luck. You are using "ROOT" as your war file
name ROOT, correct? Are you sure the jsp would reference
"/images/MyProject/nppnback.gif"? Why is "MyProject" in there? Where is
the directory "images" defined to Tomcat? Is it a default?
Here's another try at explaining:
In my JSP I have;
<IMG SRC="/images/ef.gif" ALT=People Banner">
My application is in webapps/EformsAppWar
(jsps in EformsAppWar/EformsApp/eforms/*.jsp)
(classes in EformsAppWar/WEB-INF/classes)
so images are in webapps/EformsAppWar/images
and there is, indeed a ef.gif there.
However with no server.xml changes (everything default), Tomcat 3.2
gives a 404 in his log and states in the 404 message that context is
null (CTX < >) and ca't find /images/ef.gif + NULL.
By the way I just noticed that in Tomcat 3.1 I have the images directory
directly under webapps.
----- Original Message -----
From: "David J.L. Martin" <<a href="/group/SunONE-JATO/post?protectID=114166018056146134184102046176231239071179066034">dave@t...</a>>
Date: Wednesday, May 23, 2001 3:35 pm
Subject: Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?
This works:
If the doc root is webapps\ROOT --
Using defaults...jsp's would be put in
webapps\ROOT\MyProjectApp\MyProject\*.jsp
and images would be put in webapps\ROOT\images\*.gif
Then in your jsp...use the following reference:
"/images/MyProject/nppnback.gif">
That will work just using defaults and not playing with any of the
config files...
ie. webapps\ROOT\WEB-INF gets updated as well (with required
classes).
djm
TechPie
916 924-1832 (office)
916 730-4743 (mobile)
916 313-3531 (fax)
<a href="/group/SunONE-JATO/post?protectID=114232044112042209130232046248130100239179057215113109152006048067">dmushrush@e...</a> wrote:
Many of you are running Tomcat 3.2. Can anyone tell me how to get
images to be served by Tomcat. In 3.1 if I referenced /images/image.gif> in my JSP, I could just place the images
directory in the application
(context) directory.
The default docBase is webapp> that webapp> relative addressed as /images/image.gif but such is not the case.
I have put the images directory almost everyplace possible with no luck.
I have explicitly defined docBase in tomcat/conf/server.xml and still no
luck.
I currently have the following in conf/server.xml
<Context path="/EformsAppWar"
docBase="c:/tomcat/webapps/EformsAppWar"
crossContext="true"
debug="0"
reloadable="true" >
</Context>
I place images in that directory structure but still take 404's and in
the log it refers to context as /images ????
I'm probably doing something (or not doing something) foolish. Anybody> have a remedy.
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>

Report server 6i and Report services 10g

what is the extra features in Report Services 10g which are not available in Report server 6i.
why would we use AS report services 10g rather then report server 6i,and our only requirment is to run oracle report on web which can fulfill with the help of reports server 6i.

There is a long list of new features and I cant put all of them here
You can see docs below
For running on Web 9i, 10g moves to Servlet based architecture (though old cgi mode is available for backward compatibility). Reports behaves as a component in IAS and can be monitored and managed through Oracle Enterprise Manager (OEM).
More details here
http://www.oracle.com/technology/products/reports/index.html
and here is the 10g datasheet
http://www.oracle.com/technology/products/reports/10g/DATASHEET.HTM
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

VI Server Config in LV 8.0

Greetings All,
I've recently installed LV 8.0, and have been starting the process of porting a distributed application (with an RT component) into a LV 8.0 project. So far, it hasn't been too promising. One of the main stumbling blocks appears to be figuring out the new way to configure VI Server over TCP using multiple application instances. In fact, I can't even get the "Real-Time System Manager" to work with the simplest of tests:
To illustrate the difficulty, try this:
1) Open a new project.
2) Add the PXI RT target to the project.
3) Add a new test VI (under the PXI target), and set it up to do something trivial. (Add some numbers, display a while loop counter, etc.)
4) Deploy and run the test VI on the PXI
5) Open the "Real-Time System Manager"
Even after configuring VI server for both the project and the PXI, I get the following error message:
"Real Time System Manager Error:
Can not connect to [Remote_PXI].
Please ensure that VI Server is enabled and this machine is allowed to connect"
It must have something to do with this new "multiple application instances" business in LV 8.0, but I really don't know what it is. I have used VI Server over TCP for several years and have never had any problems connecting remote PCs. And in fact, the same VI server config settings (for PC and PXI) that worked for LV 7.1 appear to be inncorrect for 8.0. I have set the parameters in the "master" options dialog, as well as in the project dialogs -- for both the PXI target, and the Desktop PC. (Default port 3363, TCP enabled for all clients and users.)
Can anyone shed some light on this? If there was any option to bypass the LV project when working with the PXI in LV 8.0, I would be trying that next. However, since the NI engineers have eliminated this option from LV 8.0, my previous experience in this area appears to be completely obsolete. It looks like I'm completely stopped in my tracks until this difficulty is sorted out.
Thanks in advance for any advice you can provide,
-- D.
www.movimed.com - Custom Imaging Solutions

DAQ Dude,
I know you've said you've been looking through the help, but have you checked this? The TCP/IP must be enabled as it is not by default.
Complete the following steps to configure the VI Server.
Select Tools»Options to display the Options dialog box.
(Optional) The default VI Server configuration is suitable for most applications. Select VI Server: Configuration from the Category list if you need to change this default configuration. The default configuration allows ActiveX to call LabVIEW, but does not allow TCP/IP as a protocol. To use TCP/IP with other LabVIEW applications, place a checkmark in the TCP/IP checkbox and configure the VI Server: Machine Access settings.
If you want to control browser access to the VIs or specify which VIs remote applications can control, configure the VI Server: Machine Access and Exported VIs options.
Click the OK button to close the Options dialog box and save the changes.
Note If a target in a LabVIEW project supports the VI Server, you can configure the VI Server for the target using the Properties dialog box for the target. For example, use the My Computer Properties dialog box to configure the VI Server for the My Computer target.
Error 66 is "LabVIEW: The network connection was closed by the peer," as you suggest, but can be seen by improper VI server configuration settings as well.

Crystal 8 Web Component Server ond Windows Server 2003 and IIS 6

I am trying to get Crystal 8 Web Component and Page Server to run on Windows 2003 Server with IIS 6. I have done the following:
Added the .cri and .rpt ISAPI extension mappings
Have Cache ISAPI extentions selected
Deselected "verify that file exists"
Aded the .cri and .rpt MIME types
Added wcsinsapi.dll as a IIS 6.0 extension
The above resolved all HTTP 40x.x errors but when trying to access a report from IE I receive the following error:
Error: Could not connect to the Web Component Server.
The page server and web component server services are running and I do see the listen ports (6401, 6403) active.
I know this is old software but it works quite well under a Windows 2000 Server and other web postings indicate that it is possible to run Crystal 8 under WS2003 and IIS 6.
Does any one know of a white paper/support document that details how to run Crystal 8 under Windows Server 2003 and IIS 6?
Has any one done this successfully?
Any tips as to cause of the "Could Not Connect" problem would be greatly appreciated.

Well as it turns out it looks like it was just this server.
We tried everything, and I added those user accounts to full
permission for the Coldfusion folders and we just could not get it
to work. We tried it on another couple servers running 2003, and it
installed perfectly right out of the box with no other permissions
needed. And those servers were all running default configs with no
other permissions done.
We still have no idea what was the problem, but at least for
now it seems to be this server. But I will tell you what, that II6
stuff seems to be a bit of a pain, we had major problems installing
new version of PHP with it too. Oh well, good luck to you
too!

Deploy to single managed server checked and greyed out while performing upgrade to EPM 11.1.2.4

Hi Gurus,
We are trying to upgrade EPM from 11.1.2.2 to EPM 11.1.2.4 and have applied the maintenance release successfully.
Issue:
When we are trying to configure EPM 11.1.2.4 and are providing the same Shared Service database details, at the summary screen, we are not able to uncheck the option "Deploy to Single Managed server" which is checked and is greyed out.
We have tried the following:
1. We updated the HSS_COMPONENT_PROPERTY_VALUE table and updated the PROPERTY_NAME "isCompact" to false.
2. Modified the config.xml file located at EPMSystem/config and epmsystem1/config to remove the property for compactState.
We are still having the issue where we are not able to uncheck the option for Compact Deployment. Any help would be appreciated.
Thanks in advance.

As it is a maintenance release and it deployed as a single managed server then you will not be able to change the deployment type when applying the maintenance release.
There is a procedure to change a deployment type from compact to single managed server that I created as an internal document.
you may want to give it a go but you would need to test this first as this was an in house test that I carried out.
Hyperion Planning - Version 11.1.2.2.300 and later
Information in this document applies to any platform.
Goal
The scenario:
EPM system 11.1.2.3 was configured and deployed as a single managed server compact deployment so that only one JVM was used for all products EPMServer0.
Later on, due to performance issues, the decision was made to go for using a JVM for each product and get rid of the compact deployment.
The administrator went ahead and redeployed the application servers individually into their own JVM.
However everytime the webserver is reconfigured, the weblogicCluster entry in the OHS file mod_wl_ohs has 2 servers, one for EPMSserver running on port 9000 and another server running on the product default port (as if it was being load balanced)
The aim:
It is clear that initial compact deployment has not been cleared from the EPM environment and the aim in this exercise is to clear the registry and the file system so that the compact deployment is removed fromthe EPMenvironment and we are left with the desired configuration Single JVM deployment for earch web application.
Solution
Caution:
Make sure that you take a backup of the following:
- TheFoundation Services database schema backup
- Take a backup of the following folders:
\Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
Disclaimer:
This was tested in House and it worked for this specific environment and it may not work for your environment. So the suggestion is to test first in a development environment and make sure that you take the appropriate backups in case it does not go according to plan.
Use at your own discretion.
Procedure:
1- Run the epmsys_registry to generate the Registry report
2- Search through the report for the word applicationServerDeployment with a corresponding value of configured and take the ObjectID number down for any entry of applicationServerDeployment that has a value of Configured
i.e:
Instance Tasks Configuration (INSTANCE_TASKS_CONFIGURATION)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7adf
3- use the object ID of each entry you have taken down throughout the Registry HTML Report to manually set it back to Pending using the following procedure:
                Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
                run the command:
                 epmsys_registry.bat updateproperty #e4b3a86a82c26941S32ef81a1455fe48473S7adf/@applicationServerDeployment=Pending
                Repeat this command for each ObjectID that has its applicationServerDeployment
                 property set to Configured
4- rerun the epmsys_registry.bat to generate the Registry HTML report and search for applicationServerDeployment in the newly generated report to make sure that they are all set to Pending and there none missed (very Important).
5- Search the registry HTML report this time for EPMServer0 which is the default serverName given to the single managed server deployment (there will be multiple entries)
Take note of the first ObjectID entry in the section header: for example
WORKSPACE_WEBAPP (WORKSPACE_WEBAPP)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
- run the command:
                 epmsys_registry.bat view #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
-Note the Parents ID in the output:
For example:
Parent 1
NAME - WORKSPACE_LWA
ID - e4b3a86a82c26941S32ef81a1455fe48473S7bd0
TYPE - LOGICAL_WEB_APP
Parent 2
NAME - HOST:BACHVMPS3TR
ID - e4b3a86a82c26941S32ef81a1455fe48473S7ffe
TYPE - HOST
- Note the single child ID:
For Example:
Child 1
NAME - WebLogic 10
ID - e4b3a86a82c26941S32ef81a1455fe48473S7fd6
TYPE - APP_SERVER
Now run the following command to remove the Link between Parent and child:
epmsys_registry removelink #parentObjectID #childObjectID
In this example that would translate to:
To remove the single child1 link to the WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ):
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd3 #e4b3a86a82c26941S32ef81a1455fe48473S7fd6
And do the following To remove the link between WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ) and Parent1 and Parent2:
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7ffe
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Now that the link has been removed, delete the WORKSPACE_WEBAPP component using its ObjectID :
epmsys_registry deletecomponent #parentObjectID
In this example:
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Delete also the Parent representing the WORKSPACE_LWA
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
Note:So we have now deleted the WEBAPP and LWA for workspace.
6- Repeat steps in section No 5 for every WEBAPP with EPMServer0
7- Start the Weblogic admin console and login
Then go to the left panel and Expand Environment -> Server
Click on Lock & Edit -> Select EPMServer0 -> click on Delete and confirm
Activate Changes and Log off
8- Stop the weblogic admin console server
9- Go to the following location and delete the folder EPMServer0:
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
Delete also EPMServer0 from the following location:
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
10- Start a command prompt and delete the Windows service that was created for EPMServer0 (if using Microsoft Windows Operating System):
Right click on the service 'OracleHyperion EPM Server - Java Web Application (epmssystem1)' and get its service name i.e: HyS9EPMServer_FOUNDATION1
Run the following command: sc delete HyS9EPMServer_FOUNDATION1
11- Launch the EPMSystem configurator and redeploy the web application server to their own JVM
12- Go to the following location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component and rename the file mod_wl_ohs.conf to mod_wl_ohs.conf.old.
13- Copy the unconfigured mod_wl_ohs.conf file from the location C:\Oracle\Middleware\ohs\ohs\conf to the location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
14- Run the EPM System Configurator again and configure the WebServer to reconfigure the OHS configuration file mod_wl_ohs.conf.
Once done then open the mod_wl_ohs.conf file and make sure that there are no servers configured with Port 9000.
15- Start the services and test the workspace

Error when trying to open 'Hyperion FDM App Server Config Manager'

Hi,
When I am trying to open FDM App Server Config Manager/Load Balance configuration/Task Manager configuration,I am getting the below error
' COM object with CLS ID-{xxxxx} is either not valid or nor registered'
Could any one explain me what this error mean and what impact will it have on existing FDM application.
Thanks in advance

Hi,
Could you please check the IIS log and see what’s the error code?
Try using the administrator account to log in the Outlook and see if he can see the apps successfully.
Thanks,
Simon
If you have feedback for TechNet Subscriber Support, contact
[email protected]
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Calling Reports from a Form - Application Server Forms and Reports Services

Hi
We currently are running App Server 10G Forms and Reports and Oracle DB 11G. Forms are running fine with the Apps Server but what I need to find out is how do I set the path for the .rdf files of the reports and how do I configure the Apps Server to present the Reports? I am sure we have to edit a .conf file and add the server name but not sure what to do or how to do it?
ps. I am a newb but I managed to get both of Apps Server and Database configured on my lonesome so I am just missing the info on the Reports side of things.
The Developer has asked the following questions :-
We want to run a report created in report builder from forms by using the following command in forms;
web.show_document(v_url,'_blank');
what does v_url need to be - we need to find an example showing the v_web_address and v_rpt_server
v_url := 'http://'||v_web_address||'/reports/rwservlet?server='||v_rpt_server||'+report=test_report.rdf &desformat=PDF&userid=user/pw@database'
Do we need to make changes on the report server configuration and where should the rdf files reside?
Regards

Hiya
Thanks for the message.
I have started to look at the response you sent me. I have included an output of the rwservlet.properties file and the rep_s-lon-w-001_frhome1 file.
rwservlet.properties
SERVER_IN_PROCESS=YES
RELOAD_KEYMAP=NO
#DIAGNOSTIC=YES
#TRACEOPTS=TRACE_ALL
#TRACEFILE=rwservlet.trc
#TRACEMODE=TRACE_REPLACE
#SERVER=<reports_server_name>
#IMAGEURL=http://<web_server_name>:<port_num>/reports/rwservlet
#KEYMAPFILE=CGICMD.DAT
#DBAUTH=RWDBAUTH.HTM
#SYSAUTH=RWSYSAUTH.HTM
#ERRORTEMPLATE=RWERROR.HTM
#COOKIEEXPIRE=30
#ENCRYPTIONKEY=reports9i
#DIAGBODYTAGS=<reports_servlet_help_file_title>
#DIAGHEADTAGS=<reports_servlet_help_file_body_tag>
#HELPURL=<url_of_customized_help_file_for_reports_servlet>
#SINGLESIGNON=YES
OID_ENTITY=%REPORTS_OID_ENTITY%
#ALLOWHTMLTAGS=NO
#REPORTS_NETWORK_CONFIG=rwnetwork.conf
#OIDCON_INIT=10
#OIDCON_INCREMENT=10
#OIDCON_TIMEOUT=0
SERVER=rep_s-lon-w-001_FRHome1
rep_s-lon-w-001_frhome1
<?xml version = '1.0' encoding = 'ISO-8859-1'?>
<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:C:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">
<server version="10.1.2.0.2">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>



</cache>


<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000">



</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000"/>


<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">

</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">

</destination>


<job jobType="report" engineId="rwEng"/>
<job jobType="rwurl" engineId="rwURLEng"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>

<log option="noJob"/>


<connection maxConnect="20" idleTimeOut="15">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>


<identifier confidential="yes" encrypted="yes">ZgZCDkywAUaHwMnb+A6YTg0UVX12puJiKZe8PYR1NHiooqnkbstGLcLqn5sWJCnWjREALf9UVz0N/P7HpgkTrPTCwgYirXmx1oZKCWkodsu06FNAJJ8ioXQCBWAG+SeHElcR5At9pTaiZZjXv8MtUP6cEUcH//E5eI4JnO/PLfS0u0OmElFdQn9lsDYF/ETYcK7QVswlN0LAE0yUqCC7bI+mVhhSkW80XXnh5oPISEiMwb+KcNW2T2zz+m1KLJAQFDk0S3cCIMaj6NBF7yXmoJOoGRNmfQBk8HHfx7Z6+l//BZP/hswX5NojatpWa46uDU8HNtNfcLSKxSUHH64g/FaEqzoXIXbIVWuGVwUA4gRUulJ0Ew0HVtyXC5wsnUW5zD0HnUFYoKXeNssDrT6HapRoEwSYE3n2ogux3vOefUXkPy5hsPCc9I3R5tmdljjuUGxmF1QXckIv12aMw0+JGIyevbv7X33vhJc=</identifier>


<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
If our Apps server is s-lon-w-001.homes.local, where do I make the changes in these two files to make the reports to run. You can see I have defined the reports on the C: on the server.
Many thanks in advance!

Dev Server 6 and OAS 4.08

I am currently trying to set up an environment using Developer Server (6) - Forms and Reports servers, OAS 4.0.8.1, NT4.0 sp5.
I have managed to configure the reports server and it operates both in cartridge and CGI mode. However the Forms Server is driving me nuts...I keep getting the dreaded white screen.
I have several questions
1. Should i have installed OAS and Dev Server in different Oracle Homes?
2. Do i need Jinitiator? If yes is it version 1.1.7.18.
3. Do i need patch set4 (6.0.5.32.0) for Forms? If yes where can i get it?
I really hope some of you can help - i have looked at all the Oracle documentation and all this has served to do is confuse the issue further.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by tony ( [email protected]):
I am currently trying to set up an environment using Developer Server (6) - Forms and Reports servers, OAS 4.0.8.1, NT4.0 sp5.
I have managed to configure the reports server and it operates both in cartridge and CGI mode. However the Forms Server is driving me nuts...I keep getting the dreaded white screen.
I have several questions
1. Should i have installed OAS and Dev Server in different Oracle Homes?
-->> Yes, install developer 6 first in default home cause multiple homes is not supported.
oas408 en ora815 now must installed in different orahomes.
2. Do i need Jinitiator? If yes is it version 1.1.7.18.
3. Do i need patch set4 (6.0.5.32.0) for Forms? If yes where can i get it?
--> Yes , you need a patch on developer.
Check metalink.oracle.com for the exact number. Also you download the patches here.
I really hope some of you can help - i have looked at all the Oracle documentation and all this has served to do is confuse the issue further.
<HR></BLOCKQUOTE>
Good luck, I'am trying to get webfroms on oas 4.0.8.1, souns like you are in the same direction.. if you wish we can keep eachother sharp wit e-mail. You can mail on [email protected]

IRC Server Config and CGI:IRC

Similar Messages

Maybe you are looking for