IRecruitment Create Vacancy Approval need to change

Hi All,
I need to change the approval style of Create Vacancy, currently it is configured as follows
1. Approver 1 approves the vacancy
2 . Approver 2 Finally approves the vacancy after approver 1.
Now the change is the on level 1 we need to four approver who ever first approve the vacancy it goes to level 2 and on this level there would be two approvers whoever approves the vacancy no need for all in both level.
kindly tell me how can I configure Rules , Attributes, Conditions , actions and approver groups in AME business Analyst Resp.
Regards,

I have edited one of the Rules created in Transaction Type: iRecruitment Vacancy Approval. Under the Actions Section, I have added the approver 2,3,4
Action Type Action
approval-group chain of authority Require approval from APPROVER 1
approval-group chain of authority Require approval from APPROVER 2
approval-group chain of authority Require approval from APPROVER 3
approval-group chain of authority Require approval from APPROVER 4
approval-group chain of authority Require approval from HEAD_OF_HR1
approval-group chain of authority Require approval from HEAD_OF_HR2
but due to this change the approval is going to be in the sequential direction, for example APPROVER 1, APPROVER 2,3,4 then HEAD OF HR1,2 instead we need who ever approve first then it goes to 2nd level and approved by one of the head of hr as I mentioned above. Kindly tell me this action type I am using for this is correct or should we need to create another action type or should we need to amend approver group SQL statement or any other way which we can acheive the desired goal. I am looking forward to listen you soon and thanks in advance for you support
Edited by: user11969686 on Dec 11, 2009 6:26 AM

Similar Messages

IRecruitment Create Vacancy Approval Notifications

Hi,
I have a client that wishes me to modify the content of the Approval Notification/Message sent to the approver. Is this possible and how to you do it?
In the User Guide it mentions using Application Developer and changing the messages but it is very limited and does not allow me to change this particular message.
I have looked at the workflow 'HRSS' but it uses the generic approvals workflow but I can't see how it generates the message. It mentions in the User Guide to use XML and business events but again gives very little detail.
Can anyone provide more information on how to do this?
Cheers

I have edited one of the Rules created in Transaction Type: iRecruitment Vacancy Approval. Under the Actions Section, I have added the approver 2,3,4
Action Type Action
approval-group chain of authority Require approval from APPROVER 1
approval-group chain of authority Require approval from APPROVER 2
approval-group chain of authority Require approval from APPROVER 3
approval-group chain of authority Require approval from APPROVER 4
approval-group chain of authority Require approval from HEAD_OF_HR1
approval-group chain of authority Require approval from HEAD_OF_HR2
but due to this change the approval is going to be in the sequential direction, for example APPROVER 1, APPROVER 2,3,4 then HEAD OF HR1,2 instead we need who ever approve first then it goes to 2nd level and approved by one of the head of hr as I mentioned above. Kindly tell me this action type I am using for this is correct or should we need to create another action type or should we need to amend approver group SQL statement or any other way which we can acheive the desired goal. I am looking forward to listen you soon and thanks in advance for you support
Edited by: user11969686 on Dec 11, 2009 6:26 AM

Unable to use copied iRecruitment Create Vacancy Functions

Hi,
I am trying to create 2 versions of the iRecruitment 'Create Vacancy' process, so I want to duplicate the standard functions and do function level personalizations to amend my new process (i.e. remove some of the train steps and others). I have created new functions, menus, permissions, and set profile options, but cannot invoke the copied functions.
I will simplify the issue below with limited setup to see if anyone else can help:
Seeded Create Vacancy Process:
Navigation - iRecruitment Recruiter > iRecruitment Home > New Vacancy (sidebar link) > Create vacancy page
Click personalize this page - the function context is:
Irc Vacancy Details - Create (IRC_VAC_DETS_NEW)
I want to have a duplicate process that invokes a copied function to allow me to make function level personalizations on this process.
Setup steps taken:
Make copy of function
XX_IRC_VAC_DETS_NEW
XX Irc Vacancy Details - Create
Parameters: OAFunc=XX_IRC_VAC_DETS_NEW&pAMETranType=IRCVACAPPROVAL&pAMEAppId=800&pProcessName=HR_GENERIC_APPROVAL_PRC&pItemType=HRSSA&pCalledFrom=XX_IRC_VAC_DETS_NEW&pApprovalReqd=YD&pNtfSubMsg=IRC_VACANCY_APPROVAL_NEW&pConcAction=N
Web HTML:
OA.jsp?page=/oracle/apps/irc/vacancy/webui/VacNewDetsPG&akRegionApplicationId=821
Add to IRC Manager Functions Menu menu (IRC_MANAGER_OTHER)
This original function was invoked when clicking the function Irc CM Home Page Create Vacancy (IRC_CM_HOME_CREATE_VACANCY) from the IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu, so also need to duplicate that function. However, this function calls another function IRC_VAC_NEW_LAUNCH_WF, so I need to duplicate that one as well:
XX_IRC_CM_HOME_CREATE_VACANCY
XX Irc CM Home Page Create Vacancy
Parameters:
Web HTML:
javascript:void submitForm('DefaultFormName',1,{IrcAction:'createVacancy',IrcActionType:'Link',IrcActionValue:'XX_IRC_VAC_NEW_LAUNCH_WF',IrcFunction:'IRC_CM_VACANCY_SEARCH'})
Add the copied function to IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu giving the prompt:
"New Vacancy 2"
IRC_VAC_NEW_LAUNCH_WF
Irc Vacancy New Launch Workflow
Parameters:
OASF=XX_IRC_VAC_NEW_LAUNCH_WF&OAHP=IRC_MANAGER_APPL
Web HTML:
OA.jsp?page=/oracle/apps/irc/vacancy/webui/ReqLaunchWfPG&akRegionApplicationId=821&WFItemType=IRC_WF&WFProcess=XX_IRC_VACANCY_NEW_V3
Add the copied function to IRC Manager Functions Menu (IRC_MANAGER_OTHER)
This final function launches a workflow process, so I have also copied that (IRC_VACANCY_NEW_V3 --> XX_IRC_VACANCY_NEW_V3) and referenced it in the function.
In Workflow builder I have amended the 'Vacancy New Details Page Function' node attribute in the workflow to the first copied function: XX_IRC_VAC_DETS_NEW
This is seemingly all the setup necessary to invoke the copied function from the IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu, however when running through the system, the seeded function is still called:
Navigation - iRecruitment Recruiter > iRecruitment Home > New Vacancy 2 (new sidebar link) > Create vacancy page
Click personalize this page - the function context is still:
Irc Vacancy Details - Create (IRC_VAC_DETS_NEW)
Can anyone help? Has anyone managed to use a copied function / copied workflow in iRecruitment Create Vacancy?
Regards,
Michael

Hi,
We have not tried to do this but I believe this is possible. I had several conversations with Oracle support about the menus/functions delivered and how changes keep affecting our system so often and the suggested approach was to copy the functions/menus so that there is no interference from what oracle might deliver in future. And in that sense, yes the copy functions should work.
I went through your post carefully and could not pick any obvious steps missed. Please ask your DBA team to bounce the concurrent tier also on your apps server/database along with a restart of all services and see if the context still switches back. However, as part of some new development, I will be doing something similar in iRec and will keep this thread updated with what I find.
Sorry, couldn't be of more help.
Regards,
Vinayaka

IRecruitment Create Vacancy: Move the Position Field

Hello all,
I was wondering if anyone knows how or if we can move the position field on the Create Vacancy: Vacancy Details page. We are unable to reorder the page using personalizations and we are strictly avoiding customizations, but the position field is in place where it just doesn't make sense.
In some cases, users will select a position, which populates the job, organization and location fields. But on the page it is after all of these fields, which doesn't make sense. Also, the position LOV is empty if org and location are already selected. We can get around this by selecting position first, but it is 10th or so field on the page.
Does anyone have any ideas on how we can accomplish this without customization? I don't think it is possible, but I thought I would get some feedback first.
Thanks,
Mark

Dear Charlie,
Thanks for your reply, but i still have the same problem.
Actually i am creating new rule with the below conditions:-
Category : For Your Information
Conditions:
VACANCY_INSERT_OR_UPDATE in (INSERT)
VACANCY_RULE_TYPE in (CUSTOM_RULE)
Action:
approval-group chain of authority Require approval from HR Africa Coordinators
Actually this rule is working fine and sending notification but my problem is that when creating the vacancy, its saying that vacancy submitted for approval which is wrong, i needed it to be created automatically.

IRecruitment - Create Vacancy

Hi
I want to show the budgeted headcount details after the position is selected in the create vacancy page. Based on the selected position, the system queries the budgeted information. How can I do this?
Thanks in advance.
MAK

If the underlying ViewObject (VO) returns the budgeted headcount in this page you would be able to identify the attribute and add it as an item through personalisation. However, the chances are that it is not returned by the VO! In which case you would need to do some customisation using OA Framework development to extend the VO.
To see the contents of a VO, look for the *'About this page'* link in the bottom left hand corner of your page. Click it and then select the Page tab. On this page, find the Business Component References region and expand it. This will show you all the VOs used on this page. The Page Definition region (above it) will show you which VOs are used in which regions of the page. Find the one most appropriate for your data and click on it. This will show you the actual VO code and the attributes it returns.
Regards
Tim

Need to change status of incident after creating CR

Hi Experts ,
I am creating a CR from my incident as folloow up document from CRMD_ORDER tcode. That is working fine .
After creating CR i need to change the status of incindent to 'CR created" .
Means at the time of creating CR i need to change the status of incident .
1 .Please suggest me where to add code related to update incdent ?
2 . Can i use ORDER_SAVE badi or any other BADI existed for that ?
Thanks in advance ,
Vijay vorsu

Hi Rajiv ,
Thnx for quick reply. I am new to CRM .I understood whats to be done.
I am following these steps :
In my CR action profile i am creating a new action called Z_status_change.
In process type- "permitted process type of action " i am selecting as ' METHOD CALL" .
Next i am clicking on "SET PROCESS' .
Here i am getting problem . When i click on help for on METHOD system is showing existing methods .Here Which method i need to select to change the status .so i thought to create a custom method .
So i created a BADI Z_STATUS_CHANGE and in attributes of BADI i have given filter type as PPFDFLTVAL .
I created implementation for this BADI Z_STATUS_CHANGE_IMP and in attributes in method i have given Z_STATUS_CHANGE .
But if i search in method in process type of action defination i could not see the method.
Is the process i am following is right or wrong ?
If i miss any thing to do pl guide me .
Thanks in advance ,
Vijay Vorsu

Approval Procedure Question - changing an Un approved document or Approver

Here is my situation. I have set up an approval Stage with 1 approval necessary for Credit Memos.
From time ot time, the approver needs to change the Credit Memo before apporving.
Also, from time to time, the Originator of the Credit Memo needs to change the credit memo BEFORE it has been approved.
From what I gather,
1) The Approver can not change the Credit Memo BUT can Add the Credit Memo but only after approving it.
2) The Originator of the Credit Memo can not change the Credit Memo unless it has been rejected, and then it is not an easy task to find where the document can be changed.
3) Any manipulation of the documents from either the Approval Status reportor the Approval Decision report is not possible.
Am I missing something here or is there an easy way to modify a pre approved document?
Thanks in advance
Dana

Actually what I am trying to accomplish is have all Credit Memos approved. I at the same time would like the person who is approving th eCredit Memo also make changes to the Credit Memo if changes need to be made. The end user does not issue a Credit Memo (Update) until the goods are received back at their facility and checked. At that time, they would like the approver make the necessary adjustments if necessary and them update the Credit Memo. I find it a bit cumbersome to have to send that Credit Memo back to the Origonator to be adjusted and then send it back for approval.
Am I missing something here? Is it possible for the apporver to not approve it and then make th changesand then update it?
Any other sugestions on how to handle this situation??
BTW Thanks for the quick responses!!
Dana

I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?

I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html

I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

See this thread:
http://answers.acrobatusers.com/Is-add-instructional-text-text-field-disappear-clicked-q19 5078.aspx

Need to change delivery date in purchase order when it is created by ME59

Hi Gurus,
Purchase orders are created using Transaction ME59 where we give the Purchase Requistion. The delivery date in the PO will be same as the delivery date of PR. According to my requirement i need to change the date of PO while the time of its creation. could you please suggest me all the user exits to do this...

Check with badi ME_PROCESS_PO_CUST method PROCESS_HEADER - method SET_DATA

I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new fields recognized. What can I do to redo my documen

I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new fields recognized. What can I do to redo my document with the changes in the text, but no changes in the fillable fields?

You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
You master the "static" content..
You keep this authoring file and have a backup of this file.
You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
The authoring file and output PDF (with form fields) gives you "rev 00".
Now, you must change something in the "static" content.
Open the authoring file and save as to a new version (e.g., "wordfile_v00" becomes "wordfile_v01).
Output this to "pdffile_v01".
Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
This replaces the "static" PDF page content and does not affect the form fields on the page.
(you may have to adjust position of form fields)
Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
Be well...

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.

Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
a 'C' student

If PO is created Or approved reference PR, should not allow to change th

Dear All
I have one requirement
If PO is created Or approved reference PR, should not allow to change the quantity or line item.
And is it possible to assign this to user specific whether to allow or not .
Thanks in advance
Mahisap

Thanks for reply
MY Requirements are
1)A PR line item should not be changed after creation of PO or after PO approved
2)In case PR is referenced for multiple po's then should check all the po's
3)if po line item deleted then system should allow to change PR
4) Assign it to user specific
plz get me outoff this
regards
mahisap

I created a calendar in the wrong calendar year. I need to change it from 2012 to 2013. Help!!!

I created a calendar in the wrong calendar year. I need to change it from 2012 to 2013. Help!!!

N000295, I am afraid you will have to start all over again. There is no way to change the year of the already created photo calender.

IRecruitment Vacancy Approval is not found in Approval Process Setup

hi
my ebs is 12.1.1
After Setting up AME for iRecruitment, i get problems as follows:
1: Approvals Management Business Analyst -->Business Analyst Dashboard
i find 'iRecruitment Vacancy Approval' is not found in Approval Process Setup.
2:when i click Approvals Management Administrator respsonbility. it get errors:
java.lang.NullPointerException
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.setMetaDataProperties(OAAdvancedTableHelper.java:391)
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.createWebBean(OAAdvancedTableHelper.java:183)
please help me.
thanks.

2:when i click Approvals Management Administrator respsonbility. it get errors:
java.lang.NullPointerException
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.setMetaDataProperties(OAAdvancedTableHelper.java:391)
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.createWebBean(OAAdvancedTableHelper.java:183)Can you find any details about the error in Apache log files (error_log* and access_log*)?
Please see if (Java.Lang.Indexoutofboundsexception: Index:0 Size:0 When Adding Another Skill [ID 1361546.1]) helps.
Also, make sure you have the "Approvals Management %" role added to the account you use -- After AME.B Responsibilities Give > There Are No Functions Available For This Responsibility [ID 340969.1]
Thanks,
Hussein

IRecruitment Create Vacancy Approval need to change

Similar Messages

Maybe you are looking for