IRecruitment - Post Advert functionality

Hi,
I am trying to achieve “Job Posting to email” functionality:
I have performed following steps:
*1)* I have created Recruiting Sites using my login as:
- Enter the recruiting site name that identifies the third-party recruiting site where
your enterprise posts the job details.
Site name : XYZ_ORG
- To send job postings through e-mail, enter the receiver's address as the Posting
URL.
Job Posting URL: mailto:[email protected]
*2)* I have created the vacancy “TestJobPosting”
I have specified recruiting site as “XYZ_ORG” (created in step 1 above) and after that I have submitted the vacancy successfully.
*3)* Using manager login, I have approved the vacancy.
*4)* I have used my login to search the vacancy and post the vacancy using "post advert" button.
My Problem:
I am not able to receive email regarding Job posting on my mail id.
Any pointers on this!!
Thanks!!
Narender
Edited by: Narender Singh on Mar 27, 2010 8:15 AM

Pl post full details of OS and EBS. Are other notifications being received successfully ?
MOS Doc 437864.1 - ' iRecruitment email vacancies to job seekers ' not sending notifications to Employee Candidates
HTH
Srini

Similar Messages

  • Negative values to be permitted in Post capitalisation function.

    Negative value adjustment required by the client.
    Negative values to be permitted in Post capitalisation function in Asset Accounting.
    Please show me the steps how to configure and how to complete the transaction with an example.

    Hi,
    Generally  negative values always be allowed for assets under construction.
    Refer Below note you can get more information
    Note 19048 - AA617 with credit memo on fixed asset / AuC settlement
    Ex: Asset Value: $ 100
    Dep : $ 80
    Now you want to post Manual Dep/ Credit Memo : $ 22 then you should select Nagative Value Allowed Check Box in Asset Maset Dep Area Level.
    Regards,
    Viswa

  • Wf_notification.getNtfResponse in post notification function

    Didn't have too many responses for my previous post, so have to ask again -
    can I use wf_notification.getNtfResponse function in the post notification function?
    Thank you.
    Anatoliy Smirnov

    Hello Matt,
    Thank you for the response. Was not sure if this was an answer or a question, so here is a signature for the function in question from wf_notification package shipped by someone named 'dmani' I guess. Using it in postNotification function always returns NULL. Just wanted to hear from Oracle or someone if this is another feature or I am missing something or this can not be used there.
    Regards,
    Anatoliy
    /* $Header: wfntfb.pls 115.230.115102.2 2005/05/16 06:04:07 dmani ship $ */
    -- getNtfResponse
    -- Fetches result(response) CODE and response display prompt to the notification
    -- IN
    -- p_nid - Notification ID
    -- OUT
    -- p_result_code Result code of the notification
    -- p_result_display Display value of the result code
    procedure getNtfResponse (p_nid in number,
    p_result_code out nocopy varchar2,
    p_result_display out nocopy varchar2);

  • Post notification functionality

    Dear Experts,
             I have defined a workflow which will sending approval notification to multiple people. I have enabled the 'EXPAND ROLE'  checkbox for the notification.
    The actual issue :
    Notification is send to multiple people. But if anyone has performed their action(Approve/Reject) then rest all their approval notification is not available in their queue.
    Expected behavior
    Each user needs to do their approval individually.
    What I have done:
    1.   I created the adhoc role and we assigned the required set people in the role.
    2.   Expand role has been enabled.
    3.   We added the post notification function but we didn't write nothing inside except null. (Coz I dont know what i need to do).
    Thanks in advance.
    Regards,
    Kanish

    Expand Roles would work for a FYI, but realistically you are setting up a Single Notification which can only handle 1 response.  If one person Approves the WF moves on.  You can follow up the Approve/Reject with a FYI saying it was approved so the other can see what, who, when.  If you need everyone to Approve/Reject you need to go into a looping scenario like POAPPRV/REQAPPRV to get everyone's individual response to move forward.  Or you can look at Voting which will save everyone answer and approve or reject based on criteria you define.
    Realistically, the Notification still exists in the Notification List if they look at the Closed Notifications tab

  • IRecruitment High Availability functionality

    Hello,
    Can some one provide a procedure to setup the High Availability functionality in iRecruitment?
    Thanks for your help!
    --Kumar                                                                                                                                                                                                                                                                                       

    Follow these steps to set up high availability:
    Set the “IRC: Availability Mode” profile option. This defines the mode in which the primary and the high availability instances are run. You must set this profile option on the primary and the high availability instances to transition between the two instances to support the candidate job site.
    Setting up the High Availability Instance. This would primarily involve:
    Building the high availability instance. To do this you can either make a full copy of the primary instance or install a clean instance and create all the data required for the iRecruitment Site Visitor functionality applicable to the High Availability pages.
    Setup the other high availability profile options.
    These steps are technical in nature and for detailed list of setup instructions please refer to the Oracle iRecruitment implementation guide.
    Thanks

  • Unable to use copied iRecruitment Create Vacancy Functions

    Hi,
    I am trying to create 2 versions of the iRecruitment 'Create Vacancy' process, so I want to duplicate the standard functions and do function level personalizations to amend my new process (i.e. remove some of the train steps and others). I have created new functions, menus, permissions, and set profile options, but cannot invoke the copied functions.
    I will simplify the issue below with limited setup to see if anyone else can help:
    Seeded Create Vacancy Process:
    Navigation - iRecruitment Recruiter > iRecruitment Home > New Vacancy (sidebar link) > Create vacancy page
    Click personalize this page - the function context is:
    Irc Vacancy Details - Create (IRC_VAC_DETS_NEW)
    I want to have a duplicate process that invokes a copied function to allow me to make function level personalizations on this process.
    Setup steps taken:
    Make copy of function
    XX_IRC_VAC_DETS_NEW
    XX Irc Vacancy Details - Create
    Parameters: OAFunc=XX_IRC_VAC_DETS_NEW&pAMETranType=IRCVACAPPROVAL&pAMEAppId=800&pProcessName=HR_GENERIC_APPROVAL_PRC&pItemType=HRSSA&pCalledFrom=XX_IRC_VAC_DETS_NEW&pApprovalReqd=YD&pNtfSubMsg=IRC_VACANCY_APPROVAL_NEW&pConcAction=N
    Web HTML:
    OA.jsp?page=/oracle/apps/irc/vacancy/webui/VacNewDetsPG&akRegionApplicationId=821
    Add to IRC Manager Functions Menu menu (IRC_MANAGER_OTHER)
    This original function was invoked when clicking the function Irc CM Home Page Create Vacancy (IRC_CM_HOME_CREATE_VACANCY) from the IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu, so also need to duplicate that function. However, this function calls another function IRC_VAC_NEW_LAUNCH_WF, so I need to duplicate that one as well:
    XX_IRC_CM_HOME_CREATE_VACANCY
    XX Irc CM Home Page Create Vacancy
    Parameters:
    Web HTML:
    javascript:void submitForm('DefaultFormName',1,{IrcAction:'createVacancy',IrcActionType:'Link',IrcActionValue:'XX_IRC_VAC_NEW_LAUNCH_WF',IrcFunction:'IRC_CM_VACANCY_SEARCH'})
    Add the copied function to IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu giving the prompt:
    "New Vacancy 2"
    IRC_VAC_NEW_LAUNCH_WF
    Irc Vacancy New Launch Workflow
    Parameters:
    OASF=XX_IRC_VAC_NEW_LAUNCH_WF&OAHP=IRC_MANAGER_APPL
    Web HTML:
    OA.jsp?page=/oracle/apps/irc/vacancy/webui/ReqLaunchWfPG&akRegionApplicationId=821&WFItemType=IRC_WF&WFProcess=XX_IRC_VACANCY_NEW_V3
    Add the copied function to IRC Manager Functions Menu (IRC_MANAGER_OTHER)
    This final function launches a workflow process, so I have also copied that (IRC_VACANCY_NEW_V3 --> XX_IRC_VACANCY_NEW_V3) and referenced it in the function.
    In Workflow builder I have amended the 'Vacancy New Details Page Function' node attribute in the workflow to the first copied function: XX_IRC_VAC_DETS_NEW
    This is seemingly all the setup necessary to invoke the copied function from the IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu, however when running through the system, the seeded function is still called:
    Navigation - iRecruitment Recruiter > iRecruitment Home > New Vacancy 2 (new sidebar link) > Create vacancy page
    Click personalize this page - the function context is still:
    Irc Vacancy Details - Create (IRC_VAC_DETS_NEW)
    Can anyone help? Has anyone managed to use a copied function / copied workflow in iRecruitment Create Vacancy?
    Regards,
    Michael

    Hi,
    We have not tried to do this but I believe this is possible. I had several conversations with Oracle support about the menus/functions delivered and how changes keep affecting our system so often and the suggested approach was to copy the functions/menus so that there is no interference from what oracle might deliver in future. And in that sense, yes the copy functions should work.
    I went through your post carefully and could not pick any obvious steps missed. Please ask your DBA team to bounce the concurrent tier also on your apps server/database along with a restart of all services and see if the context still switches back. However, as part of some new development, I will be doing something similar in iRec and will keep this thread updated with what I find.
    Sorry, couldn't be of more help.
    Regards,
    Vinayaka

  • Transfer posting from functional area A to functional area B

    When running the F.50 transaction some currency gain/loss postings have been posted to the wrong functional area. Can somebody help me how I can do a transfer posting from one functional area to another if it's possible? Or do you know another solution to this issue?

    Hello,
    Please try once transfer posting with clearing through T.code F-51
    and choose transfer posting with clearing.
          Please try this once in development i tried this for other like changing of business area amount cost center like that..
          Regards,
    Sankar

  • Mountain Lion Click to Tweet and Click to Post not functioning

    I just received my iMac (27-inch, Late 2009) back after the hard drive recall.  Apple reinstalled Mountain Lion and I am not reconfiguring settings.  I have setup a Twitter and Facebook account under System Preferences --> Mail, Contacts & Calendars.  I am attempting to use the functionality under Notification Center, by way of the Click to Tweet and Click to Post buttons.  When clicking on either one of those I get no response.  I am able to do this on my 13-inch Late 2011 Macbook Pro without issue.   I have verified all account login information to no avail.

    I know the ans...first install os x mountain lion again above all your installation..then see the build it should be.. (12c60) then..update every thing..but dont install or update..."update for macbook pro and macbook air 2.0 "it is the culprit ...then hide that update..and remember to install offline version of combo and supplement update 10.8.2..ok..as sometimes when ur notification cetre not work then installoffline "combo and supp" updates...ok..REMEMBER NOT TO INSTALL MACBOOK AIR AND MACBOOK PRO 2.0 UPDATE...PLZ...AND USE UR SYSTEM...!! follow me https://www.twitter.com/ankit8083   https://www.facebook.com/ankit8083...good luck..DONT CHANGE UR BUILD..AS IF U WILL CHANGE IT THEN UR SHARE BUTTON WILL NOT WORK..IN NEW BUILD..!!And wait for apple to get new build after april 2013...but not download macbook pro and macbook air 2.0 update..which help in graphical improvements and some usb devices...!!

  • Posting date functions

    Hai! all
    Please give me the funtion module to find out end of the posting day for the current posting date given as input.
    Thanks

    Hi,
    in SAP-standard there's no fm.
    you can only control posting-period with TA S_ALR_87003642
    Andreas

  • FI Posting document - - Function module

    hi,
    <b>Problem:</b>
    I've FI parked documents in system, n now i want to post them. I cant use batch input bcoz it inserts duplicate entry in controlling. so i need alternative of batch input, i mean any funcution module which will post all documents in bulk.
    Transaction: FBV0
    Thanks in advance.
    Sal.

    Hi Salahuddin,
    take a look to this link:
    Duplicate Controlling Document (FI)
    regards Andreas

  • No Poster Frame Function in new Quicktime 10?

    Just updated to snow leopard and trying to set poster frames in the new quicktime player. One use to be able to do this quite easily by moving the playhead to the frame you wanted and then selecting "set poster frame" in the pull down menus.
    It seems as though they have dropped this feature...
    Has anyone had any luck with resolving this?

    Agree - that works using the older version; but this is a step back. Apple Quicktime "was" a great "timer" for resolving video motion in 30 frames/sec (.033 second resolution) rather than 1 second increments. Using for sports video instruction and Physics lab.....will need to "turn back the clock" and use the older version...which is fine.

  • Illustrator or Photoshop for printed poster/advert design?

    Still in the planning phase of doing a 4m wide and 2m high poster to hang upon a door.
    Can anyone advise about how to go about it? Photoshop and Illustrator are both amazing but which one is more suitable for this particular job? Also, what does the resolution of the document have to be? Does it have to be set in cm or pixels? While Googeling there seemed to be suggestions mainly about the resolution 300dpi.
    All sort of advice would be cool!
    Kind regards,
    laanes

    Use Illustrator.  Any images would be prep'd in Photoshop.  This looks like a large format inkjet print project.  Your document's raster effects resolution should be between 144 - 150 ppi; output resolution should be 600dpi ( or 1200dpi for maximum resolution printers ).  That reference of 300dpi is wrong and comes from a source that does not know what they are talking about ( but, very common nevertheless ).  DPI is an output resolution.  PPI is an image resolution.  Whoever said 300dpi was actually referring to image resolution of 300ppi ( which, in your case, would be too high for your door poster ).  If you were planning to have your door poster commercially reproduced, then an offset press would be a better choice and would require an image resolution of 300ppi; output resolution of 5080dpi.  Since your poster would be a gradient and mostly type, Illustrator is the natural choice ( single document ).

  • Capturing the POST RESULTS function

    Hi all,
    Firstly, I have posted this question before some time ago, so I apologies to those that recognise it.  I am hoping that after more people have had a go with Captivate 5 a solution to my question might be out there!
    What I want to do is capture the fact that a user has posted their results.  We use the (I must say impressive) quiz analyser, it has worked great for many a student and we are really happy with it, BUT we are trying desperately to find a way to move onto the next slide ONCE the user has posted the results.  The reason for this is that we write quite a bit of information to a database once these results have been posted.  This information can easily get lost if the user posts there results, thinks "great its all over" and closes the window.  Our current workflow is post results and then hope the user hits another button to continue. If they dont the .php file does not get launched and we loose the db info!
    Could anyone perhaps tell me what actually gets fired when the dialog window appears for the user to enter their post result data or if it is possible to capture the fact that results have been submitted?
    Thanks so much,
    Tristan

    Hello Lauren,
    You should try updating your Flash player  , If it is not updated already.
    Please add the application in the trusted location of Flash.
    http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=00000459.html 
    Thanks and Regards
    Himanshu Satija

  • How to execute Oracle Workflow Post Notification Function

    Hello All,
    I have  a requirement where I have to approve Expense Reports through a program rather than from notification. For the same I am using below:
    wf_engine.completeactivityinternalname(itemtype=>'APEXP'
                               ,itemkey=>'4634686'
                               ,activity=>'APPROVAL_REQUEST'
                               ,result=>'APPROVE');
    Now, after executing above procedure I can see that notification is approved but my workflow has not proceed to next node as I think that the function associated with notification has not executed.
    Kindly help me on this that how can I approve my expense report and move the workflow to forward so that other functions will execute.
    Many Thanks! in advance
    Sandy

    Thanks! for your reply.
    I am using this API outside the workflow.I am using this API for iExpense to approve an Expense Report. In Expenses Workflow below are the processes:
    1. AP_MANAGER_APPROVALPROCESS whihc is using NON_AME_APPROVAL_PROCESS and this is using REQUEST_APPROVAL_PROCESS and under this process there is a notification APPROVAL_REQUES. Now, I am completing this ACTIVITY as Approve and I am able to do that but problem is that REQUEST_APPROVAL__PROCESS is itself not getting completed and stuck here.
    Please let me know how can I achieve that.
    Thansks!
    Sandy

  • IRecruitment Related Queries

    Hi,
    1.where is the post advert button located in vacancy details page and what is its functionality . I am unable to view that button.
    2. Once i fill the vacancy details, the page moves on to "Job posting details" page. Is it the same in your case .
    3. Is there any option called source type available on create candidate page, if not then where do i mention the source type.
    4. where do i configure the various source types.
    5.Is the configuration for "skills" in "Create Vacancy " page and "Create Candidate page " the same? Because while creating a vacancy the list of skills which appear is that of the list of competencies , but when i create a candidate i dont get the list of competencies, the LOV is blank.
    Thanks,
    Angelica.

    Hi Angelicka,
    1. The post advert button is located in the page of "Job Posting" , thisi created automatically if you define previously a Site where you want to Advert your Job.
    Depending on how you defined your relations with the external Site, your Vacancy will be post at that site according to start / end dates.
    2. It dependents onyour version, on the latest versions you after Vacancy details you get the page of Vacancy skill requirments.
    3.There is an option called source type when creating a candidate. This is alittle tricky.When a Candidate is filled by agencies than the agency is populated automatically. If a recruiter update the Candidate details (from ver IRC D) than he can fill also Source Type (If you can't see the field look for personalization.
    5. The Vacancy Skill List do not populate automatically at the candidate details. You need to define for Candidates what skills you whish they will populate.
    My advise, please read the irecruitment Implementation guide carefully, since the module implementation is not straight forward.

Maybe you are looking for