Is BDC the best option for this?

Hi,
I have to create a "Z" transaction to perform some of the functionality of MMSC.  Basically I need to read thru a set of user-entered materials and extend them to all storage locations in all plants.
Is BDC the best way to accomplish the loads or should I try to take some code from the standard MMSC transaction (SAPMM03M) and use that in my "Z" program...or is there a completely different approach?
Thanks for your thoughts!
Andy

Hello Andy,
The Main difference is BDC & LSMW is that in BDC itself you have to depend upon the technical constraints but for the LSMW you have yr funtional criteria strong and follow their 14 steps of performing process to completion of LSMW. your job would get done. but for the BDC you have to depend upon the programming portion which is somewhat tedious.
Regards,
Akg
Edited by: akg.amit on Mar 25, 2011 7:09 AM

Similar Messages

  • Whats the best option for passing parameters between tf?

    Dear All,
    I have three Task Flows:
    1. TF1
         -  Main Taskflow that calls a web service to gather its data
    2. TF2
         -  Secondary taskflow which receives a parameter and depending on the value of the parameter received will display its data accordingly.  Generally any data
         is feed from TF1
    3. TF3
         -  Same as TF2Use Case:
    All three TF will be dropped to the page as Regions in a Webcenter Portal Application. Changes in TF1 should propagate into TaskFlow 2.
    Question:
    1. How do I configure that changes in TF1 would be propagated back into task flow 2 and 3 and whats the best option for this?
    2. At runtime, user can choose to edit the page and TF2 and TF3 can be deleted but TF 1 should remain as the source of information.
    Given the scenario above:
    - shall I wire the taskflows via page parameters?
    - contextual events?
    What are the considerations that needs to be thought of. I havent done such requirements before.
    Please help.
    Webcenter 11.1.1.6

    Contextual events seem to be the best case.
    This way you can trigger whenever you want. Web services can be slow so you can trigger the event when the gathering of the data has been finished and then pass some value on the event.
    An event also has a payload so it's an ideal scenario to add the data from the service on it so you can use it in the other TF's.
    In order to manage the deletion of the TF1, you can use the UI events on the composer: http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_page_editor_adv.htm#CHDHHFDJ

  • TA24002 My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know which erase option would be the best solution for this problem.

    My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know what option would be the best solution for this problem?

    You appear to have two issues: 1) a hard drive that is not working properly and 2) files you wish to recover.
    Re 1) you need to answer Kappy's questions.
    Re 2) does the drive load and can you see your photo files? If so can you copy them to another drive?
    Do you not have a backup of the photo files?

  • I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

    Help Me.
    What is the best solution for this problem ?

    Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
    Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
    -and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
    -plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

  • What is the best option for tethering my IPhone 4s with my iPad? (the iPad is wifi only)

    What is the best option for tethering my IPhone 4s with my iPad? (the iPad is wifi only)

    #1. Understand that if you switch carriers, you can NOT take your existing iPhone with you. It won't work. You will need to purchase a new one.
    #2. Your only choices are Sprint and Verizon. Decide who has the better coverage in your area. Keep in mind that you will NOT be able to get simultaneous voice and 3G data on either of these, as their CDMA networks do not support it. The U.S. T-Mobile network is not supported and is not fully compatible with the iPhone as it operates on a rarely used frequency compared to the rest of the world.
    #3. What in the world are "niners"? Do you mean you want to be able to keep your existing "phone numbers"? If so, that should be no problem. Most numbers in the US are now portable.
    #4. Consider WHY you want to switch. If the issue is really price, you're not going to see much of a difference. A few dollars a month at best for comparable voice and data plans.

  • What’s the best practice for this scenario?

    Hi,
    My users want the ability to change the WHERE and/or ORDER BY clause at runtime. They may define user preferences on each screen ( which is bind to a view object). They want to see the same records based on WHERE/ORDER BY defined on the last visit. That is why I keep the users preferences and load the screen based on that, using :
    View.setWhereClause(...);
    View.setOrderByClause(...);
    View.executeQuery();
    This works good when only one user working with the application but faced low performance when more than one user working with the application.
    What are the points to increase the performance and what is the best practice for this scenario?
    Thanks for your help in advance.

    Sung,
    I am talking only about 2 users in my testing. I am sure i missed something but could not recognize that.
    This page is my custom query page including a tag to instantiate app module in stateful mode at the top <jbo:ApplicationModule..> and a tag to instantiate data source <jbo:Datasource...> and release tag at the bottom <jbo:ReleasePageResources..> and some java code in the middle(body). The java code constructed the query statement and then fires the query to set the view object based on the query statement using the above methods.
    So, I am facing very slow performance(speed) when two clients load this page at the same time. Looks like the entire application locks for others when one client load this page and fire the query. i realized the battle neck is where executeQuery() is executing.
    what do you think.
    Thanks in advance for your comments.

  • What are the best options for running windows on a Mac Pro

    what are the best options for running windows on a Mac Pro

    For gaming and other CPU intensive stuff: Boot Camp – https://www.apple.com/support/bootcamp/
    For the rest: any virtualization software (Parallels/Vmware Fusion/VirtualBox)

  • We need advice on what cloud service is the best option for us

    Hello,
    I work for a very small company, we have two designer. Both of the designers just go new computers and we are looking at switching to the cloud but are confused about what the best plan is for us. We mainly need the creative suites softwares but we occasionally both work with a few production suite programs as well. Again, it is only the two computers and we do not see a need to add anther computer within the new few years. What is the best option for us?

    Team license links that may help
    -http://www.adobe.com/creativecloud/buy/business.html
    -manage your team account http://forums.adobe.com/thread/1460939?tstart=0

  • What is the best option for 'update.... set' in owb?

    Hello.
    I have been reading on a number of ways to implement following query in OWB:
    update TABLE A
    set Value F = (select Value B
    from table B
    where (nvl(trim(A.valueC),trim(A.valueD) = trim(B.ValueF)
    and substr(A.valueG,1,2) = trim(B.valueH))
    or ( nvl(trim(A.valueC),trim(A.valueD)) is null
    and trim(B.valueF) is null
    and substr(A.valueG,1,2) = trim(B.ValueH)
    The table A and table B do not have a relationship.
    Key lookup - some of you recommend not to use it as it is not very good.
    Set Operator or Joiner? What would be better?
    I created a function for this query, but i cannot use it in the map because i get this error:
    API8003:coonection target attribute group is already conncted to an incompatable data source. Use a Joiner or Set operator to join the upstream data first before conncting it into this operator.
    What would be the best way to do it? how i can pass the parameters from two different tables into my function? What feature of OWB would be the best option i cannot use for this?
    Or my best bit to re-create it as a procedure and run it that way?
    Thank you very much for your help
    Kind Regards
    Vix

    Hopefully this is helpful and it makes sense written out.
    First, I'm not sure if there are some parenthesis missing in your update statement because I can't tell for sure whether the statements separated by the 'or' should be considered separately [ as in "(a = b and a=c) or (c = d)" vs "a = b and a = c or c = d" ] or if the logic is exactly as written. My suggestion is based on the idea that the query is exactly as written -- if parenthesis were missing, insert them as appropriate.
    My suggestion is to use a join. Even though you say A and B don't have a relationship, they sort of do based on the update statement.
    I would suggest that you start with source A and insert an expression operator. You'll send in ValueC, ValueD, ValueG. You create three outputs:
    BValueF = nvl(trim(A.valueC),trim(A.valueD))
    BValueH = substr(A.valueG,1,2)
    NullValue = nvl(trim(A.valueC),trim(A.valueD))
    Then add source table B and insert another expression operator. You'll send in ValueF and ValueH. You create two outputs:
    TValueF = trim(B.valueF)
    TValueH = trim(B.valueH)
    Then insert a join operator. For ingrp1, you'll drag over whatever can uniquely identify A and the three outputs from the expression. For ingrp2, drag over ValueB and the two outputs from the expression.
    Then your join condition will be
    BValueF = TValueF
    and BValueH = TValueH
    or NullValue is null
    and TValueF is null
    and BValueH = TValueH
    Then add your target table A, set it to update on the unique key. Drag the unique key from the joiner to the unique key on A, and drag ValueB to A's ValueF.
    Hopefully this makes sense written out. I didn't test this, but it looks logically correct on paper.
    Good luck,
    Heather

  • What is the best option for storing my iphoto library on the cloud?

    I was curious as to what people are doing (other than backing up to external HD) for backing up the iphoto library?  Anyone using any cloud solution out there for storage?  What are some of the best options?  I have around 30,000 photos in my iphoto library.

    There is no good solution for storing the Library in the Cloud. The amount of data involved means that uploading or downloading is very, very slow. We do see posts on here from people trying to restore from a back up to the Cloud wondering if it's possible to speed up the download currently estimated in days. Running a Library from the cloud is just painfully slow - people have tried it and that is the consensus.
    However, as part of a comprehensive back up plan there is a lot to be said for backing up your Photos to the cloud. Not as good as backing up the whole Library, but as a "last line" you at least have your photos. There are many options: Flickr, Picasa, SmugMug etc. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you may need to pay.

  • Which is the best Option for Time Capsule setup.

    Got my 2Tb time capsule today, burning to get home to set the whole system up but I have a few questions i'd like help with befor I jump in...
    Here is my setup.
    1) Cable internet connection running wifi through a Netgear WNR 2000 Which is a Wireless N device..
    2) 2TB Time Capsule just unwrapped.
    3) Macbook Pro
    4) iphone
    5) Hp office laptop running XP Sp 3
    5)Really complicated appartment layout which makes a single Wifi base station battle for coverage in the entire appartment.
    Ok so here is what I was thinking..
    Keep the Netgear as the base station and use the Time Capsule as a Bridge in my office thus extending the range of my existing network..
    1) Will using the TC on a wireless network as a repeater half my connection speed while doubling my coverage?? In that case it might be worth it..
    2) Do I have any reason to believe I could get better coverage using the TC as the Base Station and trying to virtually impossible task of setting up the Netgear as a bridge?
    3) Any ideas on other options open to me?

    Welcome to the discussion area!
    +1) Will using the TC on a wireless network as a repeater half my connection speed while doubling my coverage?? In that case it might be worth it..+
    Unfortunately, the Time Capsule will only "extend" a wireless network if the network has been created by another Apple "n" router. So the Netgear would not be compatible with the Time Capsule for this purpose.
    If you could connect the Netgear and Time Capsule together using an ethernet cable, you would be able to create one large wireless network.
    +2) Do I have any reason to believe I could get better coverage using the TC as the Base Station and trying to virtually impossible task of setting up the Netgear as a bridge?+
    Not sure about "better coverage", but the Time Capsule would create dual band networks operating at both 5 GHz and 2.4 GHz so faster devices could connect at 5 GHz for maximum speed and slower devices would connect to the 2.4 GHz band.
    In addition, if the Time Capsule connects directly to your cable modem, you could enable the "guest" network feature if you needed that function. (However, if the Time Capsule is configured in the network as a "bridge", the guest network feature cannot be enabled).
    On a quick glance, your Netgear router does not appear to be a simultaneous dual band device. If that's the case, you could configure it to expand either the 2.4 GHz band or 5 GHz band (assuming it will handle 5 GHz) for wider wireless coverage. But, the connection between devices would need to be via ethernet cable, and as you point out, the Netgear would need to configured as a "bridge" in this type of setup.
    If running the ethernet cable is simply not possible, take a look at a pair of ethernet powerline adapters to accomplish the same task using the AC wiring in your home to transmit the ethernet signal. While not as good as a straight ethernet cable, this type of connection would still yield better performance than wireless only, if the devices were compatible.

  • H.264 What is the best use for this? H.264 Pros & Cons?

    I wanted to know since I am using DV what if any role can H.264 play in my workflow? What are the intended or best uses for this? What are H.264 pros and cons? Will it produce higher quality than DV?
    As always thanks in advance for reading and replying to my post,
    Sebastian

    It will not make DV look better, it is a MPEG4 based compression format for material to be delivered over the web. As such, encoding your material to it it is the last step in the editing process.
    x

  • HT4623 my phone is giveing me error 21 since i updated it to ios7 it wont turn on it wont restore i have tried several times to restore the device but im really at a loss what is the best option for me ?

    hi, my iphone 5 has refused to restore after i updated it to ios7 ...... it will not turn on, it will not restore i do get an error 21 mesg and i have attempted a couple of fixes from the net, but nothing seems to work . i have no acces to my phone it just is dead whats my best option, do i need to send it to apple ?

    Hello Peter,
    Thank you for using Apple Support Communities!
    Error 21 is part of a range of error codes generally indicating that other software is interfering with the restore process.
    Check out the troubleshooting from this article named:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error21
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    All the very best,
    Sterling

  • The best option for running Windows on a Mac?

    Though I'm loving my MacBook Pro, the only thing I would like to improve is the capacity for playing games. And for that I really need Windows.
    So, I have a copy of Windows XP, and I have a copy of Parallel. I've installed Parallel and Windows XP, but it's limited and I can't figure out how to make my graphics card (which is 256MB) work with it. It seems to need to use the Parallel Graphics. So, some questions:
    1) Is there a way to play the best Windows games using Parallel?
    2) Is there a better alternative? One of my friends mentioned Bootcamp to me. Would that be better? Is there any program that would allow me to run Windows and use the full power of my system to play the games?

    For gaming... your best option is to use BootCamp. Parallels is an excellent program... and it runs Windows well under most conditions... but it is still not great for gaming (even with version 3). BootCamp is free. It allows you to boot directly into Windows making your MacBook Pro a full fledged Windows PC. Games will run just as well as they would on any similarly spec'd PC notebook. The BootCamp utility in OS X will allow you to create a Windows driver CD for all of the hardware. You will get full speed 3D, ect. Also... you can use your BootCamp installation of Windows in Parallels... So, after you install Windows via BootCamp, you can delete your previous "Parallels Only" Windows installation and go through the process of installing a new version of Windows in Parallels... you will be able to point it to the copy of Windows you have set up in BootCamp. This way... when you want to play games... you can boot into Windows and run them at full speed... but for those times you are in OS X and you just want to launch an application that does not need all the 3d power, you can launch that same copy of Windows through Parallels.

  • What is the best option for working live off external hard drive?

    I have 3 iMacs all networked together and working off 1TB of files stored on an old MacPro. I'm wondering what my best option would be for upgrading moving forward. I need more space (preferable 2TB or more) and I'd like the connection to be as fast as possible. A server seems like overkill ...
    I have an external 3TB WD Cloud backing up all of the files, but it's far too slow to work off of live as it needs to 'wake up' every time I ping it.
    Would running a 'headless' Mini directly off my router work? Or perhaps attached to one of the iMacs?
    Other options?
    Thanks in advance

    Hi there,
    Ive always followed the idea that journalling is turned off, so I would follow the advice given and turn journalling off.
    In addition I would also make that drive "private" to spotlight so it doesn't search or catalogue there.
    If its of interest, I've always formatted my drives in the following way
    make 2 partitions,
    partition 1 - make this about 10% of the drives capacity and label DO NOT USE
    partition 2 - make this the remainder of the capacity
    the reason being (So Im told by the drive gurus) is that the first sector contains the volumes boot block - this can get corrupted/damaged so having it partitioned like this means you can erase it safely whilst keeping your media.
    Ive followed this for years and it has worked on the few occasions a drive has misbehaved.
    cheers
    Andy

Maybe you are looking for