Is Debug (simulate) option working in 2004s for DTP?

Hi,
Could anyone please shed some light on how to use this debugging feature for debugging a DTP? Do I need to change the Breakpoints? And if there is an option to change breakpoints, I'm assuming that I don't need to have any breakpoints added to the code? I'm currently on 2004s SP7. Thanks!

Hi Bhuvana,
as a pre-requisite you need some data in the PSA , since otherwise, your process will not even reach the transformations.
The proceeding should work as follows:
1.) Enter the transformation you want to debug
2.) Pick the menu entry "Extras --> Generated Prgogram", and set a user break-point at the position you want to debug.
3.) Enter the maintenance of the corresponding DTP.
4.) Switch the execution mode to "Serially in the Dialog Process (for Debugging)" .
5.) Switch on any of the break-points needed by using the respective "Change" button, e.g. "Extaction Data Source" --> "Before Transformation".
6.) Execute the DTP. It should now stop first at the break-point defined 5.) and also in the break-point defined in your generated program for the transformation (see step 2.)).
Cheers
SAP NetWeaver BI Ogranisation

Similar Messages

The following options are not there for DTP , why so?

Hi friends,
the following options in DTP for delta are not there ,
only get delta once
get delta by request
Iam using SP7.
plz help me for a turnaround ?
pavan

Only get data once
Hope it Helps
Chetan
@CP..

Flash CC keyboard shortcuts for test/debug movie not working

My keyboard shortcuts all work exept for the various test / debug options, like debug on device,test on desktop. None of these options work.
I tried different keys combinations, so it's not the problem.
I'm tired of going trough the menu + submenu each time because I frequently switch (desktop is faster for quick testing).
I mean, I do this a hundred times a day. Please check this! thanks.

Hi, thanks for taking the time to answer.
Flash CC, Win7 64bit, I use sublime text, nothing else is running...
Absolutly nothing is happening if I try.
Correction: ctrl+enter has been successfully assigned (I see the text in the menu) and is recongnize for "test movie ...air debug desktop"
Others don't appear in the sub-sub-menu for testing or debugging over usb.
I've assigned them to ctrl+alt+enter/return and ctrl-shift-enter/return. (I've tried other keys as well...)
So it appear the problem is with test/debug USB...
EDIT: Just to be clear, I try to set custom shortcuts, to avoid the default behaviour (one shortcut to launch the last choice). this weird behaviour is probably the cause of the problem in the first place.

I can't sign into iCloud because my Apple ID doesn't work there. For some reason it gave me a .mac email and I don't remember the password. When it gives me the option to reset my password, it's my Apple ID password which I don't want to do.

I can't sign into iCloud because my Apple ID doesn't work there. For some reason it gave me a .mac email and I don't remember the password. When it gives me the option to reset my password, it's my Apple ID password which I don't want to do. I have ended up chaning my Apple ID 3 times lately and I still can't get to my cloud management. What do I do?

Check if your Data and Time, and Time Zone are set to automatically: OS X Yosemite: Set the date and time on your Mac
Is this issue also appearing on new user account:
Isolating an issue by using another user account - Apple Support
Mac OS X: How to troubleshoot a software issue - Apple Support
Is this issue also appearing in safe mode: OS X: What is Safe Boot, Safe Mode? - Apple Support

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

It would "run" (more like Sunday stroll or walk) if you installed Snow Leopard in a VM. Especially if you have 6-core (and would help to have 6 or 8 cores anyway if you were able to and intend to make best use of nMP for video editing).
If you "classic" Mac Pro was 2009 or later, adding two AMD graphic cards, upgrading the processor to 8-core 3.xGHz would have gotten you a FCP-X capable machine and still dual boot and use Snow Leopard as needed.
Any Mac Pro can now use 1000MB/sec SSD PCIe blade to boot from and/or for scratch and editing to help improve work flow.
SSD Blade Drive for "Classic" Mac Pro

Will microsoft word 2004 for the Mac work with OS X Mavericks

When finishing the OS x Mavericks installation, I got a message that said that some version of Microsoft office applications would not work with Marericks. Will Microsoft Work 2004 for Mac work with OS X Mavericks?

2011 - for the win with 10.9.x - http://officeformac.com

When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accur

When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accuracy matters. Any direction would be greatly appreciated. Thank you.

Are the image all the same size the % files open into a document seems to vary with the number of pixels the image being opened has. Check the Image size.

Microsoft Office 2004 for Mac - missing options

Hello!
I've got some trouble with Microsoft Office 2004 for Mac:
I realized that there are some options missing in the menu bars, such as "Insert > Cross-reference", etc.
Today I reinstalled the whole thing including all updates (11.3.7). No success.
However I noticed that on my admin account the options are existent but still not on my "everyday account".
Therefore my question:
How can I remove user specific preferences for Office? I guess this might solve my problem.
Thanks to anyone who has some hints for me!

Since Office is not an Apple product, you'll probably want to use a forum dedicated to Microsoft's Mac products such as <http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups> rather than an Apple forum that focuses on compatibility issues between Macs and Windows.
Be sure to search the forum first in case someone has already had a similar question answered

How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?

How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?

I think so: [http://discussions.citrix.com/topic/330585-firefox-default-browser-for-all-users/]
Can you also set the default programs in the Group Policy User Settings?
Reference: [http://community.spiceworks.com/topic/884740-default-user-profile-in-citrix-environment]

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.

Hi
A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
So I think this is the reason why the keyboard doesnt anymore.
In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
So for me it sounds like that your USB CD drive is not compatible to the notebook

Anyone using office 2004 for mac,please help!

Dear all,
i know this is probably the wrong place for this post,but i've always been able to find my answers here..so genuine apologies in advance
i bought office 2004 for my macbook a few months back..i'm able to open word,excel etc no problems...but when i am typing in word on a regular document..my spellcheck does not work..even where there is obvious spelling problems,it does not highlight it with a red line underneath...when i run a spell chenck,it tells me its complete and the spelling and grammer are complete,when they are obviously not!!
in the compatibilty report it tells me that that word cannot identify text language...when i select language dialog box and english (uk)nothing changes
I've also just realised that when i type in a word notebook document,spell check works!?!??!
Anyone any ideas,i have a dissertation due for college in a few days and i need it to work!!!
again apologies if this is out of order posting here,
regards,
Paul

how do i uninstall office completely???
Before you do an uninstall you may want to test your preference files for corruption. There are three which can become corrupeted, but probably only the first two will be of issue.
Quit Word and any other Office Applciations.
Browse to your User home account and locate the following files:
~/Library/Preferences/Microsoft/com.microsoft.Word.prefs.plist
~/Library/Preferences/Microsoft/com.microsoft.Office.prefs.plist
(the third has to do with fonts and I don't think that is at issue)
Drag these to your desktop and relaunch Word. Word will re-create these files.
If all works as it should you can trash these files. You will probably have to reset some preferences and Autocorrect settings. Be careful of what you reset as that may have been the cause of the issue.
If this does not work you may replace the newly created files with the ones you dragged to the desktop, or you may try re-installing Office.
If you want to completely remove Office and attempt a re-install to see if it corrects the problem: The uninstaller is located in HD/Applications/Microsoft Office 2004/Additional Tools/Remove Office.
I understand that you are in a timecrunch with your paper being due. I am sure with enough troubleshooting that you can and will find a solution to the Office problem. If the above steps do not work, however, you may also want to have a look at the free NeoOffice suite to get your paper done in the meantime.
http://www.neooffice.org/neojava/en/index.php
I am not including the link as a means of trying to pawn off the problem as I think any problem is ultimately fixable, but it may give you an option to meeting your deadline.

Debug Message Options: Not able to change in Compact embedded 2013

Hello,
I am using COMPACT Embedded 2013 with a AM33x BSP from Adeneo and I'm trying to disable the output of Process ID and Thread ID on the serial console.
My output looks always like:
PID:032D000E TID:032C000E My message
Normally this should work with the Debug Message Options, but it don't!
I can't uncheck any checkbox in the Debug Message Options.
I have done some analysis to disable the output of Process ID and Thread ID and I found the code where it is added to the output. At this code (which is in \WINCE800\private\winceos\COREOS\nk\kernel\printf.c) there is no condition for printing out the process
and thread id. I can disable the output by commenting out the corresponding lines in printf.c build the nkmain.lib and do a clean sysgen. But I don't think that this is the right way to switching this off. Does anyone know a different solution?

To disable the PID/TID below is what you have to set
g_pOemGlobal->pfnWriteDebugString = NULL;
But i have observed earlier that during suspend & resume any debug prints during OEMPowerOff will use the NULL function pointer and cause the
system to crash.
The solution is to restore the kernel to use the default serial debug during OEMPowerOff()...
VOID BSPPowerOff()
    // If OEMInit() cleared g_pOemGlobal->pfnWriteDebugString to remove VID/PID
    // from debug output, g_pNKGlobal->pfnWriteDebugString will now be NULL (see
    // NKPowerOffSystem() in WINCE700\private\winceos\COREOS\nk\kernel\kwin32.c)
    if (NULL == g_pNKGlobal->pfnWriteDebugString)
        // Set kernel pfnWriteDebugString so that debug prints in OEMPowerOff()
        // do not crash the system.
        // NKPowerOffSystem() will restore the orginal value following return
        // from OEMPowerOff()
        g_pNKGlobal->pfnWriteDebugString = (PFN_WriteDebugString)OEMWriteDebugString;
Senior Design Engineer T.E.S Electroni Solutions (Bangalore-India) www.tes-dst.com [email protected]

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

I've just hooked my 20" iMac up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and works well, EXCEPT for the green tinge (or hue) that is showing up on my TV. Any suggestions or ideas?

I've just hooked my 20" iMac display up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and everything works well, EXCEPT for the green tinge (or hue) that is showing up. Everything else looks pretty good though..... The color that is on my iMac is still good, Its just green on the TV.
Anyone have suggestions or ideas?

Try opening the Display System Preferences, then click on the Color options in the Display preferences window that appeared on the Toshiba display. Click on the Calibrate button and follow the instructions for creating a custom ColorSync profile that will hopefully solve the green tinge issue. The Apple Display Calibrator Assistant software that launches when you click on the calibrate button will walk you through the process.Assuming that the green tinge is minor and that you don't have a more serious cable or hardware issue, I am hopeful the results will be worth it.

I've been working on this for hours... Solaris works but mouse won't move

Edit: I should go ahead and say that I've looked at EVERY tutorial and guide and post I could find all over google, for literally hours. If you know how to fix this, I'm begging you to help me.
I have a Dell Dimension 8200, 256 MB RAM, Nvidia Geforce3 Ti 200 video card. The settings that appear when I press the "enter" button on the moniter say 640X480 with H.F.: 31.53 KHz and V.F.: 60.09 Hz.
For the keyboard and mouse:
Microsoft Wireless Multimedia Keyboard 1.1 ( Model 1014 ), Microsoft Standard Wireless Optical Mouse. Both of which wirelessly connect to the computer through the Microsoft Wireless Optical Desktop Receiver 2.1, which is simply plugged into the computer into the first USB slot.
My keyboard and mouse came from the same box, so they should both work...but only one does. Both worked on Windows XP, without installing any extra drivers, so it is not a hardware issue.
I'm using Xorg. Xsun graphics won't work for me--they come up as green and black scattered text. I ran the xorgconfig and xorg.conf was automatically placed in /etc/X11/. So, I assume that was done correctly... I chose Auto for Mouse Detection, the default mouse driver /dev/mouse/, Generic English 104-key for the keyboard, no for 3-button-emulation, no for special settings, yes for card selection ( I chose #19 Nvidia, #350 Nvidia Geforce will not work. ), #3 for Moniter selection, 640x800 for all options, and 16 bit I believe for all options.
I then rebooted, and the GUI worked fine and the keyboard worked fine. I logged in and got to the desktop, where I was prompted with some windows. The mouse pointer graphic was on the screen, but I couldn't get the mouse to work. I moved the mouse ( hardware ) back and forth repeatedly, despite my efforts the pointer simply stayed at the center of the screen.
It's almost humorous, right before I can read the keyboard shortcuts for Solaris manual while navigating the subchapters with the tab button and selecting them with the enter button( it was on the first layer of the windows that popped up so I could see it without needing to click on it ), the Solaris Registration window pops up a minute or two afterwards blocking out the other windows. I can navigate with the tab button in this window as well, yet the enter key does not have the authority to hit the buttons. My only option is to use a mouse...but wait--the mouse does not move!
SO TO THE POINT! Why won't my mouse work?!
I am completely new to UNIX based systems, so Solaris is my first one. I'm used to Windows XP, so just to let you know -- when UNIX commands are mentioned, you're speaking in gibberish to me. If I need to edit any files, please clearly explain how to do so--if I need to use a UNIX text editor etc., and what-not. Because as of now, I can only edit the files with the console.
Oh great...now this is appearing when I reboot:
WARNING - The following files in / differ from the boot archive:
/etc/path_to_inst
cannot find: /etc/devices/mdi_ib_cache: No such file or directory
The recommended action is to reboot and select "Solaris failsafe"
option from the boot menu. Then follow prompts to update the boot archive.
To continue booting at your own risk, clear the service:
# svcadm clear system/boot-archive
Jul 31 16:04:33 svc.startd[7]: svc:/system/boot-archive:default:
Method "/lib/svc/method/boot-archive" failed with exit status 95.
[ system/boot-archive:default failed fatally (see 'svcs -x' for deatails) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
What is going on?
Message was edited by:
NextExit

Okay I fixed it on my own by reconfiguring Xorg with a new mouse.
If anyone else somehow encounters this problem in the future, it seems like there isn't a driver for the Microsoft Wireless Optical mouse. If there is one, it doesn't come with the basic installation. Though, the keyboard works fine. The new mouse I got was a PS/2 Optical three-button mouse. It's pretty much your generic computer mouse.

Is Debug (simulate) option working in 2004s for DTP?

Similar Messages

Maybe you are looking for