Is Essbase 11.1.2 save text data?

Is Anyone know if Essbase 11.1.2 save text data? or it same as elder version just save a numeric code that link to RDBMS data on Hyperion Planning
Thanks

From the Essbase DB admin guide 11.1.2 - Essbase needs to store the text values as numbers. Therefore, a mapping of text values to numeric values is required. You define the mapping between the text and numeric values by creating a text list object. A text list object consists of a list of text values and a numeric value that corresponds to each text value.
HTH-
Jasmine.

Similar Messages

Using Automator to save (Text, Dates, Time of event) from safari to iCal ( calendar). Need help!

Hi,
I was wondering if it's possible to have a text from Safari imported directly to iCal calendar. I am running OS X Yosemite 10.10.1.
So again, I was wondering is it possible to create command on Automator that could basically have the text from safari that you highlight then double click and have it imported to iCalendar all in one step. Rather then the traditional copying and pasting from the website or the page to iCal application. It would defiantly save time and could be effective for the services.
I know that currently Safari supports making a "Sticky Note" out of the highlighted text but not iCal Event from the text or date.
Please inform thanks,
Regards

Hi there,
only two ways I can think off, you either have to tick the "Show action" when run button...which will allow you to change the date. But this requires you to do it, so not very automatic !
Daft question, but have you built the workflow and does it always have the same date, when saved as an Application and run on different days ?
Or use a GUI AppleScript, I can't see anything in the iCal dictionary that lets you create a new event...
So depending on your needs, you could add in a "Run AppleScript"
tell application "iCal"
activate
tell application "System Events"
tell process "iCal"
keystroke "t" using command down
delay 1
keystroke "n" using command down
end tell
end tell
end tell
It would open iCal, then go to today and create a new event.
It all depends on your full workflow really. It can be tweaked to suit.
regards
Ric

Is there a way to format text data that has been persisted?

I am persisting five lines of numeric data in my app. Each persisted line of data saves and returns perfectly after a ro-boot, except for the text size and color.
To be clear : If I save 199.55, that is what appears after a device re-boot. The 'formatting' I am having issues with it the font size and color.
For some reason, the font sizes have changed and some of the font colors are incorrect.
Is there a way to correct this or prevent it from happening?
Thanks.

If you are saying that I can only save text data, I can accept that.
But, why then does my saved data come back in its own colors and various font sizes?
Thanks for your post.

How do I write a vi that will save graph data and text data (related to the graph) so the next time I want to view the graph data the text data is included in the read vi?

I am new at writing vi's and hope you may be able to help. I would like to create a vi that will graph measurements taken from a daq device. I would like to include text data that a user can choose from (example: machine number, test circuit, load cell type) that will stay with the graph so when the graph is viewed at a later time the text data (explaining parts of the graph) will display with the graph data. I have included a vi I am using to capture and display a force value. Any help would be greatly appreicated.
Attachments:
force.vi ‏500 KB

What you want is a DATALOG file:
When you save a file, use the BUNDLE function to bundle your machine number, test circuit, whatever (include a few spare fields), plus your graph data. Get the graph data from the source, or use a local variable of the graph itself.
Wire the bundle output to the DATALOG TYPE of a NEW FILE function. (I presume you'll use a FILE DIALOG set to SAVE FILE to choose a file path).
Write the same bundle output to the DATA input of a WRITE FILE function.
Use a CLOSE FILE function to (ahem) close the file.
When you want to read a file, use a FILE DIALOG set to EXISTING FILE (or some other means) to specify what file to read. Wire the same cluster type to the DATALOG TYPE of the FILE DIALOG, so that it will only
offer files of the correct type.
When you have a file path chosen, wire the bundle to the DATALOG TYPE input of a FILE OPEN operation.
Use a FILE READ to read a single cluster - the output of FILE READ will be a cluster of the right type.
Use a CLOSE FILE function to....
Out of the FILE READ function, you can UNBUNDLE BY NAME the data and send to the graph and the other fields, or, if you're clever, you can use a cluster on the screen, and not unbundle it. That's harder though, since you probably want the text fields to be controls (inputs) and the graph to be an indicator (output).
Hope that helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

How to save the data present in TEXT BOX?

Hi friends i am able to create a text editor in one of my screen but i want to know how to save the data when the text is entered in that text box and retrive when they open the screen?

Hi ,
Please check the format below since it is based on a working code
first you need to create a text in s010 function module...
there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
GW_THEAD-TDID = 'ST'. " Text ID from SO10
GW_THEAD-TDSPRAS = SY-LANGU. "current language
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
*To Read from Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
*To pass to Container
CALL METHOD EDITOR ->SET_TEXT
hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

How can i save a data in text format

how can i save a data in text format in labwindows cvi
Message Edited by Tikoy on 04-14-2010 11:30 PM
Solved!
Go to Solution.

Hi,
If your data is in an array, the easiest way is to use the ArrayToFile function.
It automatically creates a file and puts your data in it according to the format you provide.
If you have individual samples that you need to write once in a while, you can either collect them into an array and then use ArrayToFile or open a file with fopen and write them as they are acquired with fwrite.
Hope this helps,
S. Eren BALCI
www.aselsan.com.tr

I want to be able to save texts to a file or folder seperate from the rest of my texts. This is so I can forward them onto someone else at a later date.

Hi
I want to be able to save texts to a file or folder seperate from the rest of my texts. This is so I can foward them onto someone else at a later time.
I have always had this facility on my previous phones e.g. blackberry but can't seem to find a way with my Iphone.

No such option is available with the iPhone.
A text can be forwarded, but texts are saved in conversation format by contact/phone number.
Texts are included with your iPhone's backup, which is updated by iTunes as the first step during the iTunes sync process. There are a number of 3rd party utilities that provide for extracting select data from your iPhone's backup for access on your computer - viewing/archiving/printing, etc.
Here is one.
http://www.mobilesyncbrowser.com/

How to stored data after clicking checkbox save in data base table

REPORT zreport                                 .
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
     END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
       gw_fieldcat TYPE slis_fieldcat_alv,
       gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
          mseg JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
    SORT itab BY matnr.
    PERFORM display_alv_output.
ENDIF.
*&      Form display_alv_output
      text
--> p1        text
<-- p2        text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = 'ZREPORT'
    I_CALLBACK_PF_STATUS_SET          = 'PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    IS_LAYOUT                         = gt_layout
    IT_FIELDCAT                       = gt_fieldcat
   TABLES
     t_outtab                          = itab
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2.
ENDFORM.                    " display_alv_output
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELFLD TYPE SLIS_SELFIELD.
set pf-stATUS 'YSTATUS'.
case p_ucomm.
when 'SAVE'.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data.
Here you wil have the table with updated data
itab2[] = itab[].
delete itab where checkbox = space. "Mark is the field for the checkbox
modify ztable from table itab.
endcase.
ENDFORM.
use loop dump error is came.
another solutions plz send me
this is mycode.

Hi Lakshmi,
You please give me some more information related to your problem instead of pasting the total code here
Warm Regards,
Vijay

How tostored data after clicking checkbox save in data base table

REPORT zreport                                 .
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
DATA:BEGIN OF itab OCCURS 0,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
     END OF itab.
data: itab2 like standard table of ztable with header line.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
       gw_fieldcat TYPE slis_fieldcat_alv,
       gt_layout TYPE slis_layout_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
          mseg JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
    SORT itab BY matnr.
    PERFORM display_alv_output.
ENDIF.
*&      Form display_alv_output
      text
--> p1        text
<-- p2        text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = 'ZREPORT'
   I_CALLBACK_PF_STATUS_SET          = 'PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    IS_LAYOUT                         = gt_layout
    IT_FIELDCAT                       = gt_fieldcat
   TABLES
     t_outtab                          = itab
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2.
ENDFORM.                    " display_alv_output
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELFLD TYPE SLIS_SELFIELD.
*set pf-stATUS 'YSTATUS'.
case p_ucomm.
when 'SAVE'.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data.
*itab2[] = itab[].
delete itab where checkbox = space. "Mark is the field for the checkbox
modify ztable from table itab2.
endcase.
ENDFORM.
this is my cde error is not came,
plz check that one,send me reply

REPORT YH648_1111111.
TABLES SSCRFIELDS.
parameter : c AS CHECKBOX USER-COMMAND SUNIL
AT SELECTION-SCREEN .
SY-UCOMM = SSCRFIELDS-UCOMM.
START-OF-SELECTION.
CASE SY-UCOMM.
    WHEN 'SUNIL'.
      WRITE 'SUNIL KUMAR .BETHINEDI'.
    WHEN ' '.
      WRITE 'BLA BLA BLA '.
ENDCASE.
THIS IS THE WAY U CAN USE THE CHECK BOX.
INSTED OF THIS WRITE 'SUNIL KUMAR .BETHINEDI'.
U USE THE INSERT STATEMENT.

How can I save text messages to my Mac and will that reduce "Other" in storage?

I have hundreds (or more) of text messages on my iPhone 5 that for personal reasons, I want to save. There are far too many to do screenshots. I want to save them to my MacBook Pro Retina in a readable and printable format. The reason is that I read that text messages can cause the "Other" storage to be higher. My "Other" is over 6 GB on a 16 GB iphone. Therefore I want to save texts, print them, and delete from phone.
First question: Is it true that text messages contribute to the size of "Other"?
Second question: How can I save texts to Mac in readable format so they could be printed?
Third question: How in the world do I delete all these texts from my iPhone efficiently? Is there a way to "mass delete"?
When you are answering this, perhaps it is noteworthy that:
(a) I've had an iPhone since a 3G in 2009, and the texts I want to save have been accumulating since then.
(b) My "Other" has gradually gotten larger over the years.
(c) I sync with itunes regularly.
(d) I've never had any problems with an iphone or with my data.
(e) I've restored from backup only three times, when I upgraded to the iphone 4, 4S, and 5.
I want to get this "Other" cleared up before I upgrade to the iphone 5S.
Thank you.

You can select to export a folder to save as a .mbox file. This file would need to be imported if you wanted to view the messages.
Select mailbox (folder)
Under Mailbox in the Menu bar select Export Mailbox...
You might also want to check out the demo for EagleFiler by the author for SpamSieve. You could view and search the messages archived in EagleFiler.
http://c-command.com/eaglefiler/
Regarding Mail being slow....
Is it only Mail that is slow? How much free space on your drive? Use Disk Utility to find available space.

How to have a member formula to reference a text data type member?

Hi there
I am just wondering how do you use a member formula to grab the text in a text data type member?
Our situation is that we have a text data type member in the Accounts dimension (called Project Manager). This is a free text field users can input a project manager's name. However, for our reporting purposes we want to report the Project Manager next to a list of Accounts (i.e. in the same row). The way we have tried to achieve this is to create dynamic calc text data type members in the Version dimension that simply refer to the Project Manager account using the reference function (->).
Although this works, when we run a report we get a number (assuming this is just the reference ID to the RDBMS field) instead of the actual name. We have set the dynamic calc member to text data type as well. We are using a planning connection as well.
Does anyone know how to make this work?
Thanks

Are you talking about FR reports, does it display the text if you reference the original member using a planning connection, if it does then it probably looks like you can't do it using the method you are trying as it is an essbase formula and in theory it will just return a number.
Cheers
John
http://john-goodwin.blogspot.com

How can i save the data in a jpanel form to a .txt document

how can i save the data in a jpanel form to a text file using parse function,this should happen when i click a save button .
please help me..

each time when i fill the form and click save button ,all the data in the form should be written to a text file and each time when i repeat it should append to the old data in the text file.the elements in the form should be seperated by pipe delimeter.
thanks for your patience..

Save text in a PO during creation

Hi All,
I need to save text in PO during PO creation. I am using the BADI ME_PROCESS_PO_CUST method:PROCESS_ITEM. My EBELN is blank here. I do have other required fields like text id, text name to use in SAVE_TEXT.
Text needs to be saved before the PO is saved.. User can edit the text. So BADI during PO save is not an option.
How do i save the text in my PO header during creation and during the line item is entered?
Do have any other procedure to add the text in the text editor?
This is my code:
Please suggest, if we have any alternate procedure to show the text in PO.
METHOD if_ex_me_process_po_cust~process_item.
   DATA : ls_mepoitem TYPE mepoitem,
            ls_mepoaccount TYPE purchase_order_accountings,
            ls_mepoacc TYPE purchase_order_accounting,
            ls_mepoaccountdata TYPE mepoaccounting,
            ls_mepoheader TYPE REF TO if_purchase_order_mm,
            ls_mepoheaderdata TYPE mepoheader.
    DATA: gt_lines TYPE STANDARD TABLE OF tline,
          gwa_line TYPE tline,
          g_tdname TYPE thead-tdname,
          g_poname TYPE thead-tdname.
    DATA: header TYPE STANDARD TABLE OF thead,
          wa_header TYPE thead.
    DATA: lines TYPE STANDARD TABLE OF tline.
    CONSTANTS : gc_z056(4) TYPE c VALUE 'Z056',
                gc_f06(4) TYPE c VALUE 'F06',
                gc_ekko(4) TYPE c VALUE 'EKKO'.
    ls_mepoheader = im_item->get_header( ).
    ls_mepoheaderdata = ls_mepoheader->get_data( ).
    ls_mepoitem = im_item->get_data( ). "Table
    ls_mepoaccount = im_item->get_accountings( ).   "Table
    LOOP AT ls_mepoaccount INTO ls_mepoacc.
      CLEAR ls_mepoaccountdata.
* Get the newly updated PO item data
      CALL METHOD ls_mepoacc-accounting->get_data
        RECEIVING
          re_data = ls_mepoaccountdata.
    ENDLOOP.
    IF ls_mepoheaderdata-bstyp = 'F' AND ls_mepoitem-knttp = 'M'
    AND ls_mepoitem-matnr <> ' ' AND
    ( ( ls_mepoheaderdata-bsart = 'UB' OR ls_mepoheaderdata-bsart = 'NB' ) AND ls_mepoheaderdata-lifnr <> ' ' ).
      REFRESH gt_lines.
      g_tdname = ls_mepoaccountdata-vbeln.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                      = gc_z056
          language                = sy-langu
          name                    = g_tdname
          object                  = 'VBBK'
        TABLES
          lines                   = gt_lines
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
      IF sy-subrc IS INITIAL.
        DELETE gt_lines WHERE tdline = space.
      ENDIF.
*      g_poname = ls_mepoitem-ebeln.   *"ls_mepoitem-ebeln is blank here*
      wa_header-tdobject = gc_ekko.
      wa_header-tdname   = g_poname.
      wa_header-tdid     = gc_f06.
      APPEND wa_header TO header.
      CALL FUNCTION 'SAVE_TEXT'
        EXPORTING
          client                = sy-mandt
          header                = header
          insert                = 'X'
          savemode_direct       = 'X'
        TABLES
          lines                 = gt_lines
       EXCEPTIONS
         id                    = 1
         language              = 2
         name                  = 3
         object                = 4
         OTHERS                = 5
      IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
**         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*      ENDIF.
    ENDIF.
ENDIF.
Thanks,
Senthil.
Edited by: senthil kumar on Jun 11, 2009 3:02 PM

I haven't used this method myself, but when I look at method PROCESS_ITEM, the import parameter IM_ITEM is of type (REF TO) IF_PURCHASE_ORDER_ITEM_MM. This has interface method IF_LONGTEXTS_MM~SET_TEXT (description: set long text per text id). This sounds like a good method to use.

Using Calc Manager to update values for Members with Text Data Type

Hi All,
In my outline I have a member of text data type. The purpose is to allow users to be able to enter comments.
Each line item is created through a business rule and I am prompting the user to enter the key values at the launch of the calc manager rules. I want to be able to prompt the user for the comments in the calc manager rule because I know that it supports variables of type string. However I am unable to assign this string variable directly to the member.
I appreciate that essbase only stores numeric data and that all text data type members really store numeric values which are basically the id's of the text string stored in a relational table by planning. however I cannot update the database table through calc manager and then bring in the generated id. Is there any way I can do this?
I don't want to skip this field in the calc manager rule and expect the user to enter the comments AFTER the line item has been created because the users want this to be a mandatory field and insist that a new line item not be created unless comments are specified.
Many thanks in advance for any help I can get.
Shehzad

If the comments are a set definition you could you smart lists in your planning forms.
create this in your smart list
xxxx = 1
yyyy = 2

A string that can be displayed as both ASCII and hex in an indicator will only save the data to a file in ASCII format

We can see the data in an indicator just fine, but when we try to write that string of hexadecimal data to a file, it will only save the data in ASCII format.
This sounds fairly simple, as the indicator can be selected to display the data in several different formats (VI>Properties>Appearance>Display Style: Normal, Backslash...., Hexadecimal). However, I have been unable, as of yet, to save the data in different formats.
Solved!
Go to Solution.

altenbach wrote:
... or you could just read the string:text.text property to get whatever is actually displayed.
like this...
LabVIEW Champion . Do more with less code and in less time .
Attachments:
texttextString.PNG ‏6 KB

Is Essbase 11.1.2 save text data?

Similar Messages

Maybe you are looking for