Is extractor 0FI_GL_4 (line items GL) available-compatible for remote cube?

Hi,
Is 0FI_GL_4 available-compatible for Remote cube? I changed parameter virtcube from space to '1' value. But when I regenerate DS in RSA6 virtcube parameter-value comes back to space. In RSA6 I see value 'D' (direct access) always.
Thanks

We donu2019t have ehp3, so i cant use 0FI_GL_14.
Can we really compare 0FI_GL_14 and 0FI_GL_10  ?
Because 0FI_GL_10 extracts not on document level but I need information (Work breakdown structure element(PROJK)) on document level.
So I need both fields in extract structure u201CAccounting document number (BELNR)u201D and u201CWork breakdown structure element(PROJK)u201D.
0FI_GL_10 contains none of them.

Similar Messages

  • Extractor of Line Items for Profit center

    Hi
    I am trying to find an Business Content Extractor of Line Items for profit center.
    Under Controling I could fined a data store for Cost Center, But could not fined the same for Profit Center.
    It has to be part of Co and not of FI
    Regards

    For profit center delta line items use 0EC_PCA_3. Periodic transfer use 0EC_PCA_4.
    pls assign points to say thanks.

  • PO Line Item wise gross value for combination of WBS and Material Group

    Hello,
    Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
    Regards,
    Milind Dumbre

    Dear Milind
    No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
    Warm regards
    Ramakrishna

  • Line items are not appearing for some users

    Hi
    In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
    Regards
    John.

    Hi,
    What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
    Please clarify your issue.
    Regards,
    RS

  • Error M8-688 - Creation of several vendor line items is not possible for document type RN.

    Hello All,
    We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
    Thanks,
    Chandu.

    I dont think that there is any way because it is a hardcoded error message.
          IF NOT t003-xnetb IS INITIAL.
            MESSAGE e688 WITH pi_rbkpv-blart.
          ENDIF.
    SAP is checking the customizing for net/gross posting per document type in table T003
    And if it is set up as net, then it is a hard error.

  • How to modify SO line item VBEP in exit for tcode VA02.

    Dear all,
    I want to modify the VBEP-MBDAT for a line item in the exit for some condition.
    I tried using USEREXIT_SAVE_DOCUMENT and USEREXIT_SAVE_DOCUMENT_PREPARE, but even after changing the VBEP-MBDAT in these two exits, its not getting reflected in the table.
    Help me out pls...
    regards,
    Jinson.

    Thankyou Andrea,
    I tried putting a break point inside USEREXIT_MOVE_FIELD_TO_VBEP.
    But it didnt stop there.
    Could you please guide me if I need to activate this exit somewhere.
    Thanks,
    Jinson

  • How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

    HI Experts,
    how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
    Requirement:
    Already the contract having two line items using ME31K.
    Custom program has to add new line items in existing contract.
    Thanks,
    Sendil

    I got the solution:
    We can do like this:
    1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
    2. After getting results, append new line item. Then use your BAPI.
    Check this posting program.. where this bapi is used, use the same coding technique.
    IDOC_INPUT_PURCONTRACT_CHANGE

  • IDoc message Document or line item does not exist for invoice reference

    Hello,
    We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
    Regards, Jan

    This is just a guide.  Adapt it to your situation.  I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order.  In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
    You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
    Elias

  • LIne item deletion -availability

    Hello Everyone,
    I am in a bit of a pickle. I had 2 KAs for a material/serial number combination say 1 and 2. The material has been confirmed in the schedule line
    in KA 1 but then BP wanted to bring it in using KA 2 so he assigned a reason for rejection for that line item in KA 1 so he could confirm the schedule line
    in KA 2. This didnt work.
    Unfortunately I deleted the confirmed schedule line in KA 1 and then deleted the line time itself in KA 1. This didnt result in the  material being available for a return with KA 2.
    As a result of the above in MMBE the material is still with the customer (KB)(we are using KB and KA for rental process mapping)
    but if look at KA 2 availablity check result for the material that qty is still confirmed against KA 1 line item which we deleted.
    Please assist in bring the material to available
    Regards
    Madan Shetty

    I had 2 KAs for a material/serial number
    What do you mean by KA??  As far as possible, please dont use any abbreviated words and conclude everybody would read your mind.  I presume it is order type.
    When you say rental processing, I don't understand why you were involving delivery.  Ideally, the process should have been Order related billing.  Also are the two lines have same material code? 
    Please share maximum informations both from business perspective and SAP point of view so that suitable suggestions can be given.
    G. Lakshmipathi

  • MIRO Invoice Posting Line Item Not Available

    Dear Gurus,
    I am trying to post a PO Invoice. There are 10 line items in the PO but two of them does not appear in the list of line items when trying to post the invoice by entering the PO number in MIRO.
    There is no prior invoice exist in the PO so all 10 line items are open and should show up while processing the invoice.
    I checked those 2 line items which do not appear and nothing seems to be unusual about them. Do you know what could be the reasons?

    Hi ,
    Is it a GR based IV - check the same in the Po.
    Secondly if yes then you will have to have GR for processing the same , in case if the same is put as a mistake then remove the tick from the Po using the T code ME22n and if there are release strategy then you will have to revoke them using the T code ME29n .
    Regards ,
    Dewang.

  • Line Item : New dispaly field for Report generated using Tcode FBL1N

    Hi Geeks,
              I want to display further fields in the line item report generated using Tcode FBL1N . i have refered OSS note 373268 it only discuss about fields available from index table ( BSID/BSAD/BSIK/BASK/BSIS/BSAS ) and special field from tables ( BKPF, BSEG, BSEC, BSED... ) using FAKP .My requirement is to add NAME1 from LFA1. Pls suggest a solution.
    Thanks,
    Karthik

    Hi Ushma,
    Its possible.No need to cpy into Z transaction.  You'll have to use a BTE for it.
    Go to FIBF.
    Create a 'Z' product.
    Put your own. Goto settings-> P/S modules-> of a customer.
    Now in the event 00001650 of z product there is a function module.
    It'll be 'LINE_ITEMS_GET_GKONT'.
    make a z by copying this and then put it here.
    Put code in that ZLINE_ITEMS_GET_GKONT.
    Also create append structure in RFPOS and RFPOSX with the fields you want.
    And activate.
    varun

  • Report at line item level but also for document total for once only

    Dear all,
    seek for your help for the following issue
    There is a A/R invoice with 3 items
    There is a report for retrieving the line item level data from inv1, user would also like to add a column to display the Document total , but the problem is, each line item will also display the Document total, any method to only display the corresponding Document total for once only?
    Example, for AR invoice number 1234567:
    Currently:
    No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
    1234567       Item-A            10           1       10                       100
    1234567       Item-B             50          1       50                       100
    1234567       Item-B             20          2       40                       100
    Requested to be presented as:
    No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
    1234567       Item-A            10           1       10                       100
    1234567       Item-B             50          1       50                      
    1234567       Item-B             20          2       40                      
    Thank you very much!!!

    Hi,
    Try This.....
    select T0.DocNum ,T1.ItemCode ,T1.Price ,T1.Quantity ,T1.LineNum ,case  when T1.LineNum ='0' then T0.DocTotal else 0 end    from oinv T0 inner join INV1 T1 on T0.DocEntry =T1.DocEntry where T0.DocNum=[%0]
    Thanks
    Shafi
    Edited by: shafi_sunshine on Oct 19, 2011 12:50 PM

  • Matching FI Line Items and Total Records for FM

    Dear Friends,
    Currently, we are implementing Public Sector Management using Former Budgeting.
    Some PR and PO has been created, before the FM budget data transferred from Cost Center Planning using FM9C.
    Using FMRP_2FMB4002 report, the u2018Available Amountu2019 still equal to u2018Curr. Budget Amountu2019, even though we can display the detail PR and PO by double-click the column u2018Assignedu2019 and u2018Commts/Act.u2019 in this report.
    After executing RFFMRC04, system shows many line items containing Fund Center, Commitment Items, and its Amount.
    I need your assistance to resolve these issues, so that the FM Report can be analyzed accordingly.
    Thanks for your kind attention.
    Regards,
    (Vincent)

    Hi,
    This thread has been created some time ago and recieved no response. Can you please close if you feel this issue/query has been resolved in the meantime. If it has not then please provide additional information in relation to your query. By providing updates to your thread it moves you thread to the first page of thread and increases visibility and possiblity for the multiptude of experts in SDN Forums to offer their support.
    Therefore please update with more information or close thread.
    Thank you for your assistance.
    Regards,
    Brendan.
    (ERP FI/CO SDN/WIKI Moderator)
    http://wiki.sdn.sap.com/wiki/display/ERPFI/ERP+Financials

  • How to get First line item in Table control for BDC.

    Hi,
    I have a requirement while creating the return order from the reference Sales order for BOM.
    Once I compare the line items and delete the items not to be returned, I want to read the first line item which in fact is header, to make some changes.
    How to read  this as cursor points to the last line item.
    -B S B

    Hi Bsb,
    What is exactly unclear to you? =POPO will give a popup screen in which you can enter the order position number. This number will then be on the top of the table which means you can refer to it in BDC with "(01)".
    Regards,
    John.

  • In Purchase Order Line item Maintaining Serial Numbers for Material Codes

    Dear Gurus,
    We have a business process in legacy system for Purchase Order like in PO line item, Material code with description, Quantity, unit of Measurement, Serial Number Start and Serial Number End is maintained, for example for Material code when we enter the data AXMLN00001 in Serial Number Start column, if the Qty 500 is maintained, by default system will calculate AXMLN00500 in Serial Number End column. 
    We understand that in standard SAP we donu2019t have this option of maintaining Serial Number Start and End in Purchase order Line item. Please let us know how this can be mapped and is it advisable to create two Z fields in EKPO table or else can we make any development.
    Suppose if this is not possible in SAP for PO then in Banks if we want to place a order for Cheque books how we can maintain Start and End Serial Numbers to print in cheque books.
    Also client is not agreeing to maintain manually Serial numbers in item text.
    regards,
    Dhanu

    Aamir,
    When the PO Item was created say for example Material had Valuation category "Y" and latter you wanted to change the category to "Y". Now system would have check for all open PO's etc...based on this you must have set Deletion Indicator to this Line Item to allow valuation category change in material master. Now when this Item got created in the table level (EKPO), system updates the valuation category "Y". Currently this valuation category is not active so it would not allow you to perform removal of deletion indicator as program cannot automatically nor you have an option to manually update the valuation category to this Item.
    Regards,
    Prasobh

Maybe you are looking for