Line Item : New dispaly field for Report generated using Tcode FBL1N

Hi Geeks,
I want to display further fields in the line item report generated using Tcode FBL1N . i have refered OSS note 373268 it only discuss about fields available from index table ( BSID/BSAD/BSIK/BASK/BSIS/BSAS ) and special field from tables ( BKPF, BSEG, BSEC, BSED... ) using FAKP .My requirement is to add NAME1 from LFA1. Pls suggest a solution.
Thanks,
Karthik

Hi Ushma,
Its possible.No need to cpy into Z transaction. You'll have to use a BTE for it.
Go to FIBF.
Create a 'Z' product.
Put your own. Goto settings-> P/S modules-> of a customer.
Now in the event 00001650 of z product there is a function module.
It'll be 'LINE_ITEMS_GET_GKONT'.
make a z by copying this and then put it here.
Put code in that ZLINE_ITEMS_GET_GKONT.
Also create append structure in RFPOS and RFPOSX with the fields you want.
And activate.
varun

Similar Messages

Addition of field for Dynamic Selection in TCode FBL1N

Hi,
We have a requirement to add the field Partner Bank Type in TCode FBL1N on clicking dynamic selection button (under vendor master) in TCode FBL1N. To achieve this we went to TCode SE36 (Logical database) and selected logical databse KDF and then seleted selection views from the extras menu. There we have selected the table LFBK and then entered 01 (function group for Vendor Master) in the box next to the field BVTYP and selected the checbox on the right of BVTYP to enable Preselection. Saved the changes.
However the field Partner Bank Type does not show in the dynamic selection in TCode FBL1N under Vendor Master. Please help.
Thanks in advance.
Mick

Thanks Miguel.
I found this on the web:
http://joyjitghosh.blogspot.com/2009/05/how-to-add-new-fields-in-dynamic.html
I have done exactly as per the instructions given in the above link, but still I am unable to see the field in the dynamic selections of TCode FBL1N. Any reason why and how can we add the field in the dynamic selections?
Mick

Cost Line Item Posting - which field indicates Order Number

Hi,
I need to know the specific Order Number (example: PM order) with has cost postings on a WBS element. I am using COVP / COEP field OBJNR to see the WBS Element (those starts with PR*), but I do not know which field is the Order Nmber contained in the table.
Please advise in which table can I see the linkage between WBS and Order number for cost postings.
Thanks!
Regards,
Vivian

Hi Eli,
Now that we have established we are looking into Plant Maintenance order (IW33) and not Overhead internal order (the WBS element is specified in the PM Order itself under Account Assignment section).
Now, going back to original question. I need to create a report to show cost detailed based on WBS Element input. I need to display all the Cost Line items for a particular WBS element. For each line items to be displayed I also need to show the particular PM Order. Would you know if the PM Order number information is stored in which field in the COVP/COEP CO posting Line item table (OBJNR is for the WBS Element)?
If COVP/COEP CO posting Line item table does not store the original source PM Order, could you suggest a way on how I can retrieve the PM Order number based on WBS element and posting date? I dont think we can just use AUFK since it is just the master data table and will not show the posting date.
Thanks!
Vivian

Extraction Line items New General Ledger

Hi all,
I want to extract the new-General Ledger document line items. However we are not on the correct enhancement package yet on SAP ECC. So we don't have datasource 0FI_GL_14 yet.
Until we have this new extractor I want to create a full load of a part of the GL (a selection on some profit-centers in the FAGLFLEXA). Has anyone experience with a custom extraction of the line-items New GL?
I think a need an outer join of the FAGLFLEXA-BSEG/BKPF. However I cannot use BSEG in an Infoset-query. Doing this join in BW is not an option because I need a field in the BSEG which is not delta-enabled...
Any ideas?
Is there a way to get the 0FI_GL_14 before we are on the right enhancementpack in SAP ECC?
Thanks for your help.
Regards, Guus

Hi,
Ideally we shoulld be in EHP3 in R/3 to make this extractor available.
But you can try by creating custom extractors and merging the data in a DSO.
-Vikram

BAPI_GOODSMVT_CREATE (in line item, missing mseg-sgtxt in doc. generated)

Hi all....
I'm using this bapi to creat material documents (without purchase orders or anything like that).. In line items I fill field item_text, but when mm document is generated, mseg-sgtxt is empty. Anyway, bapi works fine, but this field is missing....
Is it the way that this bapi should works??
Thanks from Barcelona......

Hi....
Sorry about my delay replying to you.. I don't remember the note, but I give you the SAP exit you should checkout...
EXIT_SAPMM07M_001
Hope it's useful for u......

Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

PO Line Item wise gross value for combination of WBS and Material Group

Hello,
Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
Regards,
Milind Dumbre

Dear Milind
No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
Warm regards
Ramakrishna

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

Help needed for Report Generator in B1 2005

Hi,
I have upgraded to B1 2005 and I would like to know where I can find Help files for the report generator (used to customize invoices ...). In particular, I would like to know where I can find information about the system functions available e.g. currentpage().
Thanks in advance for your help!
JP

Use this link.
<a href="https://websmp102.sap-ag.de/form/sapnet?_FRAME=OBJECT&_HIER_KEY=701100035871000437965&_SCENARIO=01100035870000000183&">https://websmp102.sap-ag.de/form/sapnet?_FRAME=OBJECT&_HIER_KEY=701100035871000437965&_SCENARIO=01100035870000000183&</a>
In Customization section you can find a document based on PLD

How to modify SO line item VBEP in exit for tcode VA02.

Dear all,
I want to modify the VBEP-MBDAT for a line item in the exit for some condition.
I tried using USEREXIT_SAVE_DOCUMENT and USEREXIT_SAVE_DOCUMENT_PREPARE, but even after changing the VBEP-MBDAT in these two exits, its not getting reflected in the table.
Help me out pls...
regards,
Jinson.

Thankyou Andrea,
I tried putting a break point inside USEREXIT_MOVE_FIELD_TO_VBEP.
But it didnt stop there.
Could you please guide me if I need to activate this exit somewhere.
Thanks,
Jinson

How to edit template for report generator in stimulus profile editor in Veristand 2011?

How to edit template for report generator in stimulus profile editor in veristand 2011?
We are using Veristand 2011.When we run any sequence in stimulus profle editor,we get test results in form of ATML file.
We want to customise the template for this test result generation as per our requirement.
For example:
Test case No.: Description of test case.
Objectives: Explanation of objectives.
Result: Passed/ Failed.
Graph: If any.
Please suggest how to do this.

You cant really change too much in the report, you can customize TRML.xsl which is created every time in the Test Results\UUT 1 folder and that would give you some flexibility on what is shown. I dont know what a xsl is actually able to do in terms of composing data from multiple files (if at all possible) but it definitely allows you to change the visual format of the existing xml data.
Otherwise I modified the xsl to customize the look of the xml report when opened in a browser to have less clutter and some coloring on the Pass/Fail but, the reports are XML files anyway so it's easy to extract data out of them and you can probably write your own report creation tool to compose the report in whatever format you like.

Incomplete Control Deliveries add new table-field for Incompleteness Proced

Incompletion Control for Deliveries add a new table-field for Incompleteness Procedure G (Delivery header)
Hello,
I'm trying to add a new field for Incompleteness Procedure G (Delivery header), but when I try to customize the procedure G with new fields, I donu2019t find the field that I need ModeOfTrnsprt-Border (EIKP-EXPVZ).
Foreign Trade/Customs tables are not included like an option for new entries in the customizing of Incompleteness Procedure G, and Iu2019ve to prevent that users save the outbound delivery without entry a valid value for EIKP-EXPVZ (EIKP-EXPVZ= ModeOfTrnsprt-Border).
Otherwise, when users are creating the SD Invoice there is an error for create the Accounting document because Foreign Trade/Customs information is incomplete.
So Iu2019d like to know If is possible to add a new tables ( and fields) to use in the customizing for Incompleteness Procedure for Outbound Deliveries (procedure G).
Thanks!!
Edited by: Ariana Serrano Aguila on Sep 2, 2010 5:19 PM

Hello,
I'm trying to add a new field for Incompleteness Procedure G (Delivery header)
, but when I try to customize the procedure G with new fields, I donu2019t find the
field that I need ModeOfTrnsprt-Border (EIKP-EXPVZ).
See as far as the table is concerned, the basic reason why it is not getting populated as SAP stores the possible values at the domain level. So i think the right approach to add the table would be to get access key for the domain and then add the new table name at domain level. Please reach out for help from ABAPer in this matter.
You can also use User exit to met this requirement and the appropriate user exit will be as below:
1.MV50AFZL
2. MV50AFZ1
Regards,
Sarthak

IDoc message Document or line item does not exist for invoice reference

Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, Jan

This is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias

How to populate COPA fields for GL posting using BAPI_ACC_DOCUMENT_POST

Hi All,
I am posting documents in FB50 using BAPI_ACC_DOCUMENT_POST. I have a requirement to post the documents with profitability segment parameters as well. Should I use EXTENSION1 table to pass COPA updates and implement BTE to achieve it? Can anyone please guide me with the procedure to populate the COPA fields for GL posting using BAPI_ACC_DOCUMENT_POST?
Also please let me know how/where to check if COPA is enabled for a GL account.
Thanks,
Subathra

Moderator Message: This forum is for questions directly related to Web Dynpro ABAP only. It should not be used for general questions. I am moving this thread to the ABAP General forum.

How to add new tab after reason for rejection tab using tcode va01

Hello,
how to add new tab after reason for rejection tab using tcode va01.

Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

Line Item : New dispaly field for Report generated using Tcode FBL1N

Similar Messages

Maybe you are looking for